hey guys got my tilt yesterday and falshed it with the diamond touch pro rom i also had s2u2 lockscreen enabled, well i plugged my phone in the charger last night i woke up and the touchscreen didnt work at all, first i soft reset the phone to no avial, then hard reset and now im stuck, the phone powers up to the welcome setup and cant get past it due to no touchscreen
heres what ive done to try to fix
soft reset
hard reset
changed the radio settings to 1.65
reflashed with htc 6.1 rom
any help would be appreciated also could somone let me kno if they think i should redo the hard sbl
i second this.. any help would be great
this is very weird, alot of people are having the same problem at the same time, I too am having that problem, I have never put a custom rom on my phone, my my touch creen also has stopped working, I've tried hard re-setting it, and that didn't work its just stuck on the stylus set-up screen, and then i even tried to hard flash the HTC kaiser rom again, same results.
Related
I have a big problem.....
My phone hung this morning on the alarm. It kept on going. So I turned off the phone. A few hours later I booted up the phone again but it didn't boot to the os... it is stuck in the 3 colored bootloader screen
I tried reflashing the original WM6.1 rom. It worked.... until the cusomization had ran. After the customization reboot there was the bootloader again.....
Can anyone help me on this?
Info in the bootloader screen is as folows:
KAIS130
SPL-3.29.0000
CPLD-8
USB
Please help!!
First thing I'd do, is a bulk standard Hard reset on the phone. if it crashes again on the customise, then hard reset again, and soft reset before the customise kicks in.
alternatively, if you're happy to try a custom ROM, then flash it to a new one.
if these dont work, then its time to approach HTC, and see if you can get it repaired...
I allready did a hard reset after flashing my tytn and a soft reset before getting the customization screen. But every time it boots up and it wants to configure my phone. So I cannot get arround the cusomization
While re-flashing my TyTN II to the Orange WM 6.1 Test ROM I did the reset before the customisation...and what happens the phone resets itself to default. It seems that the operators have found a way to make sure that their customisations are added.
Mine is purchased without a account. So there should be no provider **** on it..... It's a realy weird problem though....
Could it be dirt??? I left the battery out for a few hours and it works for a short time. Putted my sim card back in and it stopped working. Reboot and it worked again for a short time but after te next reboot its over again and it wil not come back again. I now plan to leave the battery out for the night see how it is in the morning...
Anyona an idea (bump)
I've got the same problem.
Although I'm able to restart successfully the Kaiser randomly.
If you pay attention to the tricolor screen... it blanks the screen for a very short moment. Precisely in that moment, a message is written in the screen
" No imgafile file found! "
And then went back immediatley to the tricolor screen.
My Kaiser is HTC orginal, updated with the original HTC ROMWINDOWS MOBILE 6.1. I did not nothing special to it, I treated always it carefully... It seems a random Hardware problem. HTC is an awfull brand.
Now I have to go to HTC service... they will get my phone for a couple of months at least.... and I know (from previous experiencies) they work very very badly (they can give your phone back even broken!!)
Conclusion... HTC never more.
Did have the same problem. Asked and RMA to HTC. Shipped the phone on june 30th. Phone came back repaired yesterday !
This morning... the %$* red green blue reappear when I soft reset the unit.
Not very reliable, will have to buy another phone.
Sorry my english, but I'm brasilian and the touch screen stop work
and I can not run anything...
I tryed to install hardspl, but do not work...(I did the hard reset, and tryed vol.down/reset too, but)
now, it's blocked in the "align screnn" mode, but don't walk...
Please...any suggestion??:
I have exactly the same problem.I 'm thinking i will go to sent it for to repair because i haven't see the tips for to resolve this problem.
how many times did you try to align the screen or does that not even work? i remember when i first flashed hardspl it kept resetting to the align screen after i aligned it (did it about 10 times) until i took battery out and then tried again and it worked fine!
More than 20 times )-:
All my hardbuttons work but nothing works on the screen no matter how long i press down or hard or soft. The touchscreen just isnt working. I just woke up this morning and it stoped working.
Does anyone have any thoughts?
Please help I dont understand why its doing this I cant turn my volume up or anything
Well,
You still have to provide a few more information if you really want someone finding out the cause of your problem!
What have you done last on your device before it happened? Are you still running on the factory installed ROM? Have you tried SOFT RESET and HARD RESET yet? And so on ...
Hmmm,
people always seem to forget that we have no clue about the actual condition of their devices! We further can't possible know what they have tried already to solve the problem. In addition, it is important to remember what had been done last on the device before the problem occured (such as installing / removing software, screwing with the device's registry, reflashing, giving it a bath and so on ...)
Well the last thing I installed on my phone was slide to unlock and that was like a month ago. I have soft and hard reset and I'm stuck in the set up after the Hard Reset were it has you touch to continue. I am on factory rom. The only software on it was TomTom 7, spb shell, slide to unlock. Everything worked fine on it and then I touched my screen one day and noticed it wasnt responding to my touch and it really just came out of the blue like I have not dropped it or got it wet or anything no problems until now.
Any other information you need let me know?
Thanks
Hi guys,
I've got a bit of a problem with my friends X1...
A while ago I updated my X1 to WM6.5 and it works perfect...
But last week my friend asked me to update her phone as well, so I did
Now here's the problem:
After updating, the phone got stuck on loading, it didn't even get past the SE screen...
Turned it on and off for a couple of times, soft reset, hard reset, nothing worked...
I was still able to get the phone in the tri-colour screen, so I did, and I installed a stripped down version of WM6.5
And it worked!
But this afternoon she called me up to say that the phone was having problems again.
She often can't turn it on, and when she can it seems as if it has lost all of its memory again, comletely blank as if you just got it out of the box... (So you have to setup your screen again, the time and date etc...)
I did it exactly as id did mine, and mine still works perfect...
What could have gone wrong?
First I put Hard-SPL on the device.
Then I used the rom update utility from christian-web.nl/sections.php?section=Xperia_rom (I used version 3.810)
And thats it!
Does somebody have any idea what could be the problem?
Thanks,
Rob
A few days back I read somewhat of the same story, about the phone hard resetting by itself. Can't recall where, but it was somewhere in the Xperia section of this forum.
Did you do a hard reset after flash? Or maybe task29 before flashing her phone?
Try the hard reset first and see if that helps.
Hey guys, sorry for the bother, I realise there are a few threads already about this problem, but I tried most of them to no avail unfotunately...
Basically, a few weeks ago my HTC Tytn II just decided to die on me, i.e. once it is switched on, I just see the opening screen and it just stays like that... I tried hard resetting by pressing the 2 soft keys and reseting, it goes to the screen, I restore to factory settings, but I get the same story...
Also, now once the phone is plugged in to charge, it just refuses to power up (?).
I have to mention I had trouble with the usb connector a few months ago and had to replace it... But it worked fine after that for months...
Any ideas? I don't care about the data, I backed most of it up in any case, I just want to make the phone work again if at all possible...
Thanks in advance!
BTW, I have HardSPL 3.29 installed and have previously flashed my ROM to the standard Windows mobile 6.1
vedadp said:
Hey guys, sorry for the bother, I realise there are a few threads already about this problem, but I tried most of them to no avail unfotunately...
Basically, a few weeks ago my HTC Tytn II just decided to die on me, i.e. once it is switched on, I just see the opening screen and it just stays like that... I tried hard resetting by pressing the 2 soft keys and reseting, it goes to the screen, I restore to factory settings, but I get the same story...
Also, now once the phone is plugged in to charge, it just refuses to power up (?).
I have to mention I had trouble with the usb connector a few months ago and had to replace it... But it worked fine after that for months...
Any ideas? I don't care about the data, I backed most of it up in any case, I just want to make the phone work again if at all possible...
Thanks in advance!
Click to expand...
Click to collapse
Have you checked with other battery? If not, proably is your USB conector.
Thanks for the reply - but in the end, just reflashing the ROM directly from the SD card worked out with some fingers crossed!
I did lose all the data, but hey, at least my HTC works again...
All the best!