I think i have brick my phone!!
I tried to install the new hspl 1.54 through my storage card. After installing the hspl 1.54 on my phone I get the next message in my bootloader "Uprgrade rom code error Please try again". So I tried again, this time through the computer with HSPLwrapper_blackstone_1560Olinex.exe and this time the phone stuck on 0%....
What can I do now?
The following text in my bootloader is:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Uprgrade Rom code error
Please try again.
Before I had tried to install hspl1.54 I had 1.14 Olinex on my device...
Strange thing is that its saying that i have spl 1.54.0000
Problem solved:
I want to thank Reyber and Crackwhore for the solution.
What did I do:
I could not use my storagecard anymore, because if i wanted to start my device it went to the bootloader directly.
So I used the pc method.
1. Get the USPL 2.5
2. put my phone in the bootloader ( read the thread USPL first how to do it!)
3. Run the USPL 2.5
4. My device restarted and i get SPL v1.15
5. After that I run HSPLWrapper_Blackstone_156OliNex
6. To confirm i have installed the new Olinex version 1.56 i go into bootloader and saw 1.56 Olinex!
After that I installed a rom and it is working perfectly atm! !!!
_________
Have you read the guide where you found the HSPL ?
Ye I did...
probeer uspl 2.5
je kan op 2 manieren
via storage card:
1. vind een manier om de BLACIMG.NBH op de root van je storage card te zetten
2. haal je storage card uit je telefoon
3. zet je telefoon in bootloader en verbind het met usb kabel
4. als er nu van serial naar usb verandert dan zit je goed
5. doe je storage card er weer in en start uspl 2.5
6 als het goed is moet hij nu upgraden.
via pc:
1. haal je storage card eruit
2. zet je telefoon in bootloader en verbind het met usb kabel
3. nu moet van serial naar usb veranderen bij bootloader
4. start uspl 2.5
5. klik op die .exe bestand die altijd mee wordt geleverd
6. als het goed is moet hij nu weer laden.
dit is wel voor 1.56 of hoger roms
voor lagere roms moet je op een andere manier proberen
kuyichi said:
Ye I did...
Click to expand...
Click to collapse
So i guess you have tried copying SSPL-Manual and then run it from device and then flash with RUU ?
hi, i've got the same probleme and i'm very in trouble.
my phone start in bootloader and it's written "upgrade rom code error please try again.
could you explain me how to install uspl via the storage card, i don't speak netherland language.
i can't use my phone, i don't know what to do, please help
hobbes1984 said:
hi, i've got the same probleme and i'm very in trouble.
my phone start in bootloader and it's written "upgrade rom code error please try again.
could you explain me how to install uspl via the storage card, i don't speak netherland language.
i can't use my phone, i don't know what to do, please help
Click to expand...
Click to collapse
Use USPL to install a new 1.56 ROM. This is the only way.
ok but how to use the uspl. i don't know. could you explain me how to use uspl from the storage card please
thanks kor your answer
as i my phone start in bootloader i try to install uspl 2.5
i do this : connect phone in usb in bootloader. from the pc run blac_uspl but the phone do not restart.
in bootloader i can see in the red :
top right corner "RUUNBH" => PROBLEM ?
after :
BLAC100 32 M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
in the green :
Upgrade ROM Code error
Please try again
in the blue :
nothing
in the white :
USB
I think there's a problem and that's why i can't do nothing.
you need to have activesync 4.5
than go to prefences en unsight 'usb connection'
after that
do this:
1 start hd in bootloader
2 connect with usb cabel
3 now you see usb written on your hd
4 use uspl 2.5, click on the uspl.exe and than wait your screen changes from spl. 1.54.000 to spl 1.15
5 download a rom 1.56 or above
6 open blackstoneRuuwrapper.exe that comes with the rom
7 if everythings ok it must update now correctly...
geen dank joh,
ik had eerst ook zo een probleem
toen werd ik geholpen door CHRACKWHORE
many thanks
maarjah je leert de van een ander je en geeft die informatie door aan een ander
thanks for all your answer, indeed, i've install the driver 4.5 for activ sync and succeed to run blac spl
thanks again
good to hear !
Thanks Kuyichi
I had exactly the same problem and have resolved exactly like you did.
1. Removed SD Card
2. Connected Phone to PC via USB
3. Rebooted phone into Bootloader
4. Disabled USB Connections in Activesync
5. Ran uspl.exe, clicked RUN uspl and waited for bootloader screen to change from spl. 1.54.000 to spl 1.15
6. Installed ROM of my choice
I'm now happily running Win 6.5
No problem LoobyLou!
Glad to hear your phone is fine again.
Thank you!!
You saved my day after trying to flash my phone for 1001 times!
You saved my day after trying to flash my phone for 1001 times!
Click to expand...
Click to collapse
Hehe! Now you can flash roms! Have fun!
haha had the same problem fixed it with uSpl but how do get from usPL to HSpl i have right now spl1.54
Just to clarify
I'm glad you got it resolved, but just to clarify the term 'bricked'. If you brick your phone you cannot do anything. You phone won't turn on, you cannot enter bootloader, you can do nothing. i.e. you phone is as much use as a brick, hence the term.
A lot of people state they have bricked their phone while in reality all you have done is followed the process of getting HSPL or USPL onto your device incorrectly and are stuck at a certain stage. If you can turn on device, enter bootloader etc chances are extremely good that you can recover your device
I'm glad you got it resolved, but just to clarify the term 'bricked'. If you brick your phone you cannot do anything. You phone won't turn on, you cannot enter bootloader, you can do nothing. i.e. you phone is as much use as a brick, hence the term.
A lot of people state they have bricked their phone while in reality all you have done is followed the process of getting HSPL or USPL onto your device incorrectly and are stuck at a certain stage. If you can turn on device, enter bootloader etc chances are extremely good that you can recover your device
Click to expand...
Click to collapse
Indeed you are right. I think most people don't know when the phone is bricked (including me, but now i know). That's why i have put a questionmark behind the topic.
Related
Everytime I try to upgrade to the latest swedish ROM (RUU_Prodigy_2170701_21707103_20710_QT-EK_SVE_Ship.exe) I get the same error every time after 95% of the installation is complete:
FEL [326]: OGILTIGT KOMMANDO "Denna NBF-fil kan inte användas med din telefon. Krontrollera din NBF-fil."
In english:
ERROR [326]: INVALID COMMAND "This NBF-file cannot be used with your phone. Please check your NBF-file."
When I checked the readme file it said:
"ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code."
I've tried doing a fabrique reset but nothing happens when i push the buttons to do that. Now i'm stuck with the red, green, blue test bootscreen and don't really know what to do.
I have no guarantee left wich will make my phone pretty expensive to service at the customer service center.
Can anyone help me?
i get the same problem, pleease help us or have you found a sullution?
ja är också svensk, så om du hittar någon lösning kan du väll säga till? för ja har samma problem å grinar snart för ja får aldrig till det =(
mvh/ Johan
Hi Guy's,
after sucsesfuly upgrade mij own wizard to the WM5_AKU3.3_Crossbow_BETA rom
a friend of mij owns the same phone and askt me to do the same for him
but the phone keeps coming back to the old rom witch i had installed on mij phone as well its this one "RUU_Prodigy_2180706_21807106_20710_QTEK_DUT_Ship"
also first red all the forums and found this "TodayAgenda_v0.9.22.CAB"
install and uninstall then install again to make wizard forget emmbedded rom
no sucses
anybody how knows a trick
this is mij first post because i cant find the sollution myself
excuse my bad englisch
thanks in advance
Make sure that the phone is Super CID and unlocked.
just red this one in the post above
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
I have just seen the same
it seems this phone can not be unlocked
with lokiwiz
sould i try the flash to the 1.05 rom even do its a tmobile phone????
tryed 4 times to unlock all unsucsesfol
Hi, I try to update my Xperia with SE Update Service from R1A to curent actual version.
My SPL is OK - http://forum.xda-developers.com/showthread.php?t=431218
But Update Service can't recognize my phone.
Any ideas?
What can I do?
in SPL mode on my XPERIA:
KOVS110
SPL-0.72.OliNex
MicroP1-707
MicroP2-707
is this ok?
are you using vista?
as i'm encountering the same issue, with no solution so far
anmeldung said:
Hi, I try to update my Xperia with SE Update Service from R1A to curent actual version.
My SPL is OK - http://forum.xda-developers.com/showthread.php?t=431218
But Update Service can't recognize my phone.
Any ideas?
What can I do?
Click to expand...
Click to collapse
Just unplug and plug the USB cable while the phone is in the colors screeen.
It works, garanteed
sorry for my english
REPLAY: " are you using vista?
as i'm encountering the same issue, with no solution so far "
No I using Windows XP.
Also I reconect my phone few times... but nothing....
I reinstaled Actve Sync 4.5 - again nothing
http://forum.xda-developers.com/showthread.php?t=445662
try SD methode
bassam said:
http://forum.xda-developers.com/showthread.php?t=445662
try SD methode
Click to expand...
Click to collapse
But how to get the image from SEUS?
Mate, you seem to have HardSPLed your X1 (because of the "Olinex"). Usually SEUS does not work anymore then. You have to download an image e.g. here in the forum. You can find lots right in this section. You have to decide between a Stock-ROM or a custom one. Then you install it just like you did with the HardSPL. How to do this exactly you can find more than once in the "Stickies".
I see someone told that if you're using Vista, just login with Admin user then it's ok
anmeldung...try restoring the original SPL even if it shows error, do this about 3 times, then attempt the SEUS update about 4 times.
strangely enough this method worked for me and SEUS also updated the rom from 0.72 to 0.78 before they identified my phone...now everything is back to normal
anmeldung said:
in SPL mode on my XPERIA:
KOVS110
SPL-0.72.OliNex
MicroP1-707
MicroP2-707
is this ok?
Click to expand...
Click to collapse
Not Okay Man
You SPL is still hard spl by olinex
kindly get back stock spl and try to update
regards
HI IM A BEGINNER AND I NEED HELP TO UPDATE MY X1,,
Ive got windows mobile 6.1 in my phone but i want to update to eneryrom kovsky !!
ive tried for 7 hours and i still have problems..
my first problem is that error 262
kingforlong said:
hi im a beginner and i need help to update my x1,,
ive got windows mobile 6.1 in my phone but i want to update to eneryrom kovsky !!
Ive tried for 7 hours and i still have problems..
My first problem is that error 262
Click to expand...
Click to collapse
pleeeeeease heeeeeeeeeeeeeellp !!
Hi
sorry ich kann zwar fast alles in englisch lesen, aber mit dem schreiben haberts, also bei mir hat ein Wechsel des USB - Steckers geholfen!
Sorry!!!
a nice day!
Please look at this thread: http://forum.xda-developers.com/showthread.php?t=431218
ROUBLESHOOTING TIPS:
- read the instructions.
- read the instructions.
- read the instructions.
- if you get connection error in RUU after the device goes to tricolour screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. read the thread for even more tips that I don't remember now. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- if hardspl EXE won't run, and you are on vista, try to right click it and use "run as Administrator" option
- if SSPL-Manual.exe or enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
it work!
1- have you made Hard SPL first?
2- Have you try with SDcard method?
First i have read all that is for read, and dummi guide. I have Windows 7 64bit, windows 7 32bit on other computer, and windows xp 32bit on third computer, and i cant do sync on each one. I conect usb, and HTC Touch HD and i get sync when mobile is turn on, but then i unpluger, turn off, go to bootloader, then tunr on usb cabel, and i get USB on mobile at bottom, but cant sync, and when start HSPLWrapper_Blackstone_156OliNex.exe there where need to write my older version say nothing, but when i continue only stop and 0% and after 1min say 262 Update error.
Is this about syncing or flashing?
Have you tried USPL method if you are trying to flash?
Bodisson said:
Is this about syncing or flashing?
Have you tried USPL method if you are trying to flash?
Click to expand...
Click to collapse
Dont understand, but is there any other method to install new 6.5wm on HTC Touhc HD other then USB. Or in our language: ali mogu i na domacem, hocu staviti novi 6.5 ROM sve potpuno novo, i nece mi ucitat jel postoji neka druga metoda da nemoram prkeo USB kabla?
So, it's about flashing, not syncing.
There's a method of flashing from microSD card, but I can't remember where it's described.
Please re-read [TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
It will help if you state is your phone carrier locked or not... if yes, I think it has to be unlocked first.
Ah... also, what info does it show in bootloader mode?
To flash a rom you need either USPL or HSPL. To use the SD card method, you need to have HSPL or USPL on your device first!!
You stated that when you go into bootloader and connect device to pc, bottom of bootloader changes from "serial" to "usb", correct?
Then when you run HSPL it stays at 0%, correct?
Have you tried Manual SSPL? Go to this thread and follow instructions for manual SSPL.
Post any further flashing problems in that thread
Thread closed