Ok I think i have killed my trinity.... - P3600 Software Upgrading

So i decided to flash my ROM on the weekend, and the upgraded failed. Now the phone is stuck in bootloader.
Now i have two years ago after getting my trinity i had SPLed the phone and i have never had any issues upgrading my rom. (I think the SPL is fried)
I have tried to use Mitty to fix the bad SPL but it won't connect. It can't find the USB port?
I have also tried flashing from my mini SD card but it simply say's loading and then goes back to bootloader screan?
Can anyone help me here?

Related

unable to revert to O2 rom

Hi Guys,
i consider myself relatively experienced at flashing HTC devices having been using and upgrading for a few years but i've run into an issue on my CID locked G4. i upgraded to WM6 without issue and i tried to revert back to my O2 rom, the flash failed and i'm now stuck at the splash screen. I've tried to flash the original ROM from boot loader but i get a 101 error unable to connect(can see it in device manager). as i'm using vista i did a search and found some instructions and driver files but i get the same result. the only thing i can think of now is to CID unlock but i'm not sure it will help (unless it allows me to do the SD card restore). any ideas guys?
IPL:2.21.001
SPL:2.21.001
GSM:02.25.11
OS:10.1.0.811
OK., what you need to do is use a PC with XP, because i have read that vista PC's can get you into a lot of trouble. When you are at an XP PC, follow the instructions in my previous post
( http://forum.xda-developers.com/showthread.php?t=313354 ).
When you flashed the original ROM, and you succeeded in doing so, think real hard if you still want to upgrade to a new ROM.
If you still want to do that, stick to a PC with XP installed (no vista!).
If you did reflash a good ROM into your HTC you'll be one step closer to upgrading your ROM.
Read this post thourougly :
http://forum.xda-developers.com/showthread.php?t=298613
as this will help you in case you didn't CID unlock your device.
(thanks vippie; this is the clearest walktrough i could find!)
If you are really sure you CID unlocked your device, you can flash your device to any ROM you think is useful to you.
If your device is really CID unlocked, you should be able to flash any ROM that is posted on this forum.
I know that it is that easy, because i have tried every WM6 ROM that is posted on this forum
good luck, and i hope in the end you will have the ROM that you want....
thanks. my device IS CID LOCKED and i've tried to flash it from 2 XP machines so it is looking like its a brick thanks anyway.
for sale wizard with pretty 3 colour screen - sold as seen!!!
One thing you can try is use another USB to mini USB cable, i have had one cable that didn't connect really well.
Sometimes it worked but if i moved my phone the connection went down.
I just thought of that because it was a while ago that this happened - I threw away the faulty cable and had no problems after that.
tried 3 different cables too
knownuser said:
tried 3 different cables too
Click to expand...
Click to collapse
How much do you want for it? I need a new screen and body shell!
jabreu203 said:
How much do you want for it? I need a new screen and body shell!
Click to expand...
Click to collapse
was actually kidding i'd like to fix it but i'm open to offers PM me.
ok .....HELP
i've paid for the CID unlock which went well i then tried to flash the O2 default rom failed error 101 (connection) i then tried wizard love failed error (300) in italian.
so stage 2 was to use the sd card recovery i ran the utility and then followed the instructions r2sd all etc..all seemed fine i restored the image to the wizard and rebooted it still won't go past the splash screen i've tried re-flashing and hard reset still no go....please guys any help???
If you have a memory card take it out. Right click on ActiveSync and go to connection settings. Uncheck allow usb connections then try to flash. With windows XP...
tried to flash on a win2K machine (4 pc's thats the only one thats not vista) still get error 101 on the original O2 rom and 300 on the wizard love rom.
still no joy anyone have any ideas???
http://www.t-mobile.hr/mdasw/RUU_Pro...R_WWE_Ship.zip fixed i'm on a tmobile rom i'll try downgrading again.

Unable to fix Stuck @ splash screen.... Can I use miniSD reflash?

My wizard (Cingular 8125) becomes unstable recently so I decide to reflash. Due to my stupidity, my laptop went to sleep mode while flashing. I thought I bricked my phone but it seems semi-bricked. After looking around, I try to fix using bootloader mode (holding the camera button while turn on) and I can get to the bootloader mode but my Window refuse to connect.
I'm running Vista and it doesn't connect. Try killing Mobile Device Center thread and changed the PPC driver and still not connect. Try the "vista flash guide" sticky above but doesn't work....
So, is it possible to do this via miniSD? I don't have any backup. My previous ROM was original Faria WM6 rom (old one, not his recent one)......
Help needed.....
Well,I wud like to advise you to first try to reflash with pc running winXP,as it's highly recommended,as win Vista still has many issues.
Secondly,to flash through MiniSd,your phone must be CID unlocked and a working Rom is already backed up on a MiniSd card.
I already have the phone CID-unlocked before my previous flash. I have been using Faria ROM for about a year but it's just start having problem recently.
I do not have access to XP machine that I can mess with now. It would be great if I could have some vanilla ROM updated via SD while I'm waiting....
i would like to know how to flash via SD also my usb port is broken and haven't been able to update my rom for months now
Keland44 said:
i would like to know how to flash via SD also my usb port is broken and haven't been able to update my rom for months now
Click to expand...
Click to collapse
If the phone is CID unlocked and you already have a backup of the rom on a Minisd card,Yes! its possible using the MTTY 'rs2d.all' command.Read here how to do it:-
http://forum.xda-developers.com/showthread.php?t=276963

What on earth am I doing wrong when flashing?? *SOLVED!*

Hi, first of all let me begin by saying that I have spent a long time reading around through the guides and forums about flashing rom/radio to my Rohdium but still face problems. I have successfully flash my old TyTN II and Orange E650 but am at a loss as to why Im struggling this time round!
I flashed the Hard SPL which went 'fairly' smoothly, got there in the end after having problems on WIndows 7 64bit and then succeeded using Xp 32. However when trying to flash a new rom and/or radio I am greeted with an error, that being Error 284. I have tried like I say on Win7 64, Xp32 and when the error pops up my phone gets stuck on the process bar and forced to pull battery out. I then put it back in and it freezes on bootloader. The RUU software trys to recover but it is a loop of the same thing happening (attempts and then crashes). The only way to get out of this mess was strangely reflashing HardSPL which recovers it and allows me to boot to Windows. I have tried flashing a radio and/or rom whilst in sync within windows, I have tried flashing when manually forcing the phone to enter bootloader, I even paid the £10 to get the unlocker which would patch the special radio but that even returns the same error. I have the sim card out and storage card, battery charged over 50%. I even tried the Mtty program (sorry if mispelled, at work now and can't fully remember name!) when it was stuck at bootloader and using the "boot" command it boots as far as Touch Pro 2 logo but then doesn't progress, then i resorted to reflashing HardSPL which allowed me to boot properly. I just don't know what else to try!
Like I said Im sorry if this is obvious to someone but I have tried alot!
Many thanks in advance if someone could help!
* Update: Just tried flashing a radio on my works computer (XP 32) and it flashed no problem!? Wonder why my operating systems had an issue?
** SOLVED! ** - got home and randomly tried again on Win7 64 without using my USB extension cable and plugged into a different USB port directly and it worked! Faulty cable maybe, bad luck, who knows, it works!
Thanks.
Sound like maybe your RUU/update utility may have gotten corrupted. I would try to re-download the rom you want to flash over to your home pc again and try to re-flash.
If that doesn't work, you can always flash your rom through the storage card.
hmmm yea thats possible, will try when I get back in couple of hours thanks! Just seemed weird how nothing was working, different roms (cooked roms or shipped roms) and even the security/sim unlocker that I purchased......mystery!
USB cable tends to go bad easily! That might be the reasion why!

Phone slow and often doesnt work at all

Hi people,
I recently decided to update my touch diamond to wm6.5.
Already got HardSPL 1.93 some time ago together with the swift rom.
Now I downloaded this rom:
BOGYSOFT WM6.5 Build 23060
http://forum.xda-developers.com/showthread.php?t=552162
And followed the instructions carefully, put the rom on the internal storage and started the update process as usual.
After it had finished installing I already noticed it took the phone way to long to completely boot into windows.
After a few reinstalls I finally got it to work but it was very slow and often I couldnt even unlock the damn thing.
At this point I cant even get into windows anymore.
Now ofcourse I want this rom removed from my phone, but is that even possible when I cant boot it into windows??
I need to have an USB connection to put on another rom, so is that possible without windows?
Thanks for your help!
I got the same problem. anybody help us?
I had a problem with an earlier version of this ROM, and the fix turned out to be quite simple.
I flashed my stock ROM back on and then re-flashed BOGYSOFT, ever since then been no problems what so ever.
I had flashed a few different ROM's to try before this it's possible I suppose that there may of been some corruption with repeated flashing.
I think the hardspl is affecting the phone's stability, cause returned back to the stock after flashing some cooked roms and it's bad more than before.....
any news?
mb76 said:
I had a problem with an earlier version of this ROM, and the fix turned out to be quite simple.
I flashed my stock ROM back on and then re-flashed BOGYSOFT, ever since then been no problems what so ever.
I had flashed a few different ROM's to try before this it's possible I suppose that there may of been some corruption with repeated flashing.
Click to expand...
Click to collapse
Yes but dont you need to acces the phones internal storage to add a new rom?
Cause I dont know how to do that when I'm not even able to acces windows.
Anybody?
Is my phone bricked or is there a way to connect to the internal storage without WM?
Now it doesnt even boot the rom anymore,
The image has even dissapeared from my internal storage.
It is now stuck in the Bootloader telling me to trigger the USB host.
Any ideas?
My Diamond has been pretty unreliable over the last couple of days, but I used MTTY to format the internal flash, loaded the latest Gen.Y ROM (I don't think it really matters which ROM tho) and now it works perfectly again. Plus to me it seems a bit faster. Anyway I couldn't be happier.
If you can get into the bootloader with USB I'd certainly give the instructions in this flash a go (post 3 or 4 only if you're on Windows XP).
http://forum.xda-developers.com/showthread.php?t=540290
thanks mate!

Can't flash Tilt HELP!

Hi, guys.
I became recently an owner of AT&T Tilt. I got it with KaiserTouch (two months old release) and I wanted to flash the newest version. But there is the problem.
I downloaded the newest release, connected the phone with my computer, started the KaiserCustomRUU.exe and when the installation is about to begin, it just hangs on 0%?! And the computer shows the error 262, or something like that.
I tried ALOT of times and it's always the same.
Tried flashing from an SD card, but it just shows "Loading..." and hangs there until I take the battery out.
Then I succeded flashing the official ROM with KaiserCustomRUU and now I'm stuck on 6.1 AT&T ROM. Won't flash ANY of the cooked ROMs. :/
Tried to flash HardSPL with both methods and the things are the same (hangs at 0%, hangs at "Loading...")...
So, PLEASE help me!
Edit: My SPL says: SPL-3.56.0000
Edit 2: Made it! HardSPL wasn't installed. So I installed HardSPL 3.56 and it worked! Installed the cooked rom without problem from SD card!
lol How bizzare. I asked the question and I answered it in the same post. Sorry for this.

Categories

Resources