Hi,
I tried update my Xperia using SE update service, but I can´t.
I follow these steps of update service:
1) Turn off the phone
2) Press volume down and power button until colored stripes are visible (Serial visible on white stripe)
3) Connect to my PC using a USB cable (USB visible on white stripe)
But nothing happen!!!
My Xperia features:
SW ID: 1218-9240
SW version: R1AA021
Customization Id: 1219-1224
Customization version: R2A
Customization Variant: GENERIC_NAM
ROM version: 1.02.948.8
ROM date: 09/17/08
Radio version: 1.06.25.29
Protocol version: 52.43.25.24U
ExtPkg version: 1.0.22670.11276
I´m using Vista 32 bits
Please, Someone could help me to solve this problem???
Related
this appear's and i cannot get rid of this even after i've read and deleted all sms's, the only way is by soft reboot
any 1 know how to get rid of this without rebooting
Rom Version: 1.11.00WWE
ROM Date: 01/27/05
Radio Version: 1.00.00
Protocol Version: 1337.39
ExtROM Version : 1.11.169 WWE
p.s when u click on the envelope a popup msg say's message sent
Yes, click on the envelope icon in the start bar & select Close option...
hey all I tried to put the upgraded cam patch onto my XdaIIi and it went wrong and now all the screen says is:
SERIAL
V1.01
whats wrong with it and more importantly how do i fix it?
thanks
put your device to the cradle and run the upgrade proses from your pc. Im sure you can done it.
Thanks
thanks cluster, its back to normal now I crapped myself for a minute
is this right?
ROM version: 1.11.00 WWE
Radio version: 1.04.00
Protocol version: 1337.42
ExtROM version 1.11.162 WWE
Yes, for some reason your device (correctly) went into Bootloader mode, but the process wasn't finished.
It doesn't matter, so long as you run the entire firmware flashing process from start to finish and keep the device in the cradle until it says finished on your PC, you should have no problem.
Hi All,
I Upgraded my I-mate PDA2K with the i-mate 1.40.176 rom and now i get and error when I try to use the camera.
Failed to Initialize Camera.
Please Reset Hardware.
36001:100:2
I have tried a soft reset and a hard reset, I also re flashed with T-Mobile UK 1.42.112 and O2 UK 1.40.242 but the problem is still there.
Also the camera button is mapped to Media player instead of the camera I have re mapped this under buttons in settings but if you do a soft reset it losses this and reverts back to media player.
Any help would be greatly appreciated.
Current Config:
Model No.: PH20B
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1.40.242 WWE
Try to upgrade it to wm5 and if you really want stick with wm2003 then you can downgrade.
Sorry for my very bad english.
I have BA upgraded from W2003SE to WM6 (Helmi BA WM6 R0).
ROM Version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version:
I'm trying to upgrade Radio to 1.15.00:
MaUpgradeUt_noID:
Your device software is about to be update from:
Device radio image version: 1.12.00
To:
Radio image version: 1.15.00
Click update to continue.
and then...ERROR 101. CONNECTION ERROR...Click exit to quit
I'm using Windows Vista and XP. The same message in both systems.
The same problem with this SO roms:
- BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP
- RUU BA xplode WWE 6.10.00
Please, help me....
try to upgrade in "BOOTLOADER MODE".
press record+powerbutton then softreset while holding them. that will give you a "Serial X.xx" and if you plug it in the usb/cradle, it will turn into "USB X.xx"... then try the upgrade/flashing again.
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
entolium said:
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
Click to expand...
Click to collapse
Mine has ever shown any existing version, only shows what the new one will be. All my flashes have been fine. Did you try to continue and actually get an error, or did you stop when it "did't find your pda" ?
Win XP, Activesync 4.5 running
In Bootloader Mode (usb v2.07):
- Run upgrade
"Checking the information in your device...."
"Device CE image version: <empty>"
To "CE image version: <empty>"
- Click Upgrade
"Checking the information in your device...."
...........nothing.......i kill the process in task manager
In normal mode:
- Run upgrade
"Checking the information in your device...."
"Device CE image version: 5"
To "CE image version: 6.10"
- Click Upgrade
"Checking the information in your device...."
"ERROR 101. CONNECTION ERROR"
SOLVED
I'm SOLVED !!!!!!
I'm removed the SD card and ok
im glad you solved it.
just fyi...
you can continue flashing in bootloader mode even if the upgrade software doesnt show your current ROM version, just like Kasush said. it doesnt matter.
I had to open up my kaiser to replace the main flex cable since my phone no longer detected my sim and memory card (the screen also no longer lit up, but all is well now)
But for some reason the keyboards back light does not come on when pressed or in a dark setting. It's not a big issue for me but is some what of an annoyance.
I'm using jjblaster's newest rom but i'm pretty sure this was happening with the stock rom after i had opened the kaiser up. Any ideas on what could be causing the problem?
Heres my device info:
Rom Version: JJ's Rom WWE
Rom Date: 12/13/09
Radio Version: 1.65.21.18
Protocol Version: 25.88.40.05W
Bump.... any ideas?