hi guys
first of all sorry for this subject name but im really pissed off, so pissed i could kill sum1 seriously...
i bought this friggin ppc like 2 years soon, and of all that 2 years i've been using it for half a year in total...
first problem was lcd missaligned, than soon started USB problems..
managed to repair LCD (changed it completely) but now the USB problem remains and im friggin tired dead of all this mess... i don't have a clue what to do anymore..
so, cignular 8125, G3 series... molski 2.26.10.2 AKU 2.3 rom on it...
problems now:
it boots up after 2-3 minutes..
than the worst problem is that USB cant sync with pc...
i tried plugging in motherboard usb on pc,. than tried to get even a 2nd PCI usb card and always the same problem..
when i connect pc via usb cable to ppc, i see ballon saying: usb found, generic rndis, PocketPC mobile based bla bla bla and after few secs i get usb hardware might not work properly, error ocured.. and that happens all the time, i even get sometimes on PPC a screen saying USB> connecting to host (cancel, hide) and it freezes there...
so, after this mess i send ppc to a service guy that changed me the USB plug on ppc (as u guys said it could solve the problem http://tinyurl.com/3xvj4m )
so he changed it and im stuck again on this friggin ppc...
goddamn %&/()= i wish i was never so stupid to buy this piece of machinery, after only half a year it bricked down and now i'm only loosing my mind...
anyway... can anyone make this for me http://tinyurl.com/2ku6lw copy his rom on sd card and send me that copy of sd card over mail or put it on ftp?
Any other thing doesnt help me, even in bootload mode it says USB in left corner on ppc, but again pc says usb not recognized and again it wont get connected (so no RUU update)...
guys, im seriously desperate....
btw, anyone knows sum1 in eastern or central europe a person or service capable to fix this....? the ppc i got it from usa, but im in eastern europe..
thanks and i hope u will understand my nervouse..
did u allready try to connect with other pcs?
i had problems like this when
1.) i do not switch off internal firewall, ashampoo, didn't have this problem with sygate personal
2.) i had software installed, called PLV - Manager , has something to do with my work..^^, which connects via Serial port and somehow does also block usb ports.
well yea i tried other pcs, but maybe the firewall is the key and some other programs... i'll see this weekend... any1 suggestion for a service guy who can manage to repair the ppc in case i fail?
thx
Hello,
Firstly I want excuse that I open new threat and open it here, but please let me explain it why I do it.
I have O2 Stellar, with SPL:1.82.0000 and my USB dont work, and USB connector is OK and cable or USB port too. I try it at diferent PCs with diferent systems aka XP, Vista.
Main problem is that USB dont sync with ActiveSync or other, no "Tada sound" dont show "not recognize" really nothing action when I plug it to USB.
And charging is work only when PDA is off and light RED LIGHT but when is off, than no action, no light, no charging.
I know that this is threat for "Kaiser General" but I can live with charging only when is off, but I cant live withou coocked ROMs, I really try use all HardSPL new Radios, NBH from shippedroms copy to SDcard (Formatted to FAT32) and it only show "LOADING..." but nothing, more, still Loading.
I was tryed JumpSPL but it dont flash from SDcard, and USB is not showing and not working, that I cant use MTTY.
Please let this threat open, I really need HELP
Do someone know if this is Hardware or Sofware problem?
I cant send it to service, from my country is too expensive (like new phone)
Thank you in advance
Jozef Ziak
Edit: The handsfree is working perfect, I really dont know what is it.
i have the same problem i been through three phones already 1 that i used roms on and two brand new ones from warranty att said it's a hardware issue".they are sending me another phone.
I had almost a similar problem with my tilt at one point. Check your usb to pc settings and make sure you have "advance connection" (or something similar I can't remember exactly what it says) checked. On the rom I am using now shows something different there. I says "enable faster data sync" "uncheck if activesync doesn't recognize the device"
Thank you, but nothing reconize my PDA, no sound after plug, nothing when I go manualy to Bootloader, only show serial, not USB
same problem
Hi,
I had the same problem. I tried everything but nothing helped. I had 2 more months of warranty so they changed the main panel. After I got it back from the service it was working for 3 weeks long and now again died with the same issue.
Strange. I have to send it back to the service.
HI there , I had the same problem for about 4 month but i solved it >>> how ?
Just clean your htc USB port and check if it is broken or not and you will see that your issue will be solved brother
Hi all,
Since a week I can't use active sync, or acces my drive (Diamond Touch)
Battery charging as normal, I tried other mini USB cable, 3 computers, reinstalled active sync (4.5) Also tried different ROM's , hard reset. So I thought the connector is broken or something and went to a store where they repair PDA and stuff. The man told me that the connector was fine and his idea was the hardware port is damaged. Anyone who had the same, or maybe something else what can help me.
I guess I need T mobile Rom before I send it back for warrenty.
Thx in advanced...
can you access drive on the computer or on the phone as well?
Did you hard reset and clear storage as well?
Don't forget to put HSPL back as well if your sending it back
Hi thx for the reply, yes i can acces it on the phone, not computer. And yes i got the original from Tmobile( ugly skin!) Got download it with Wifi. so i guess im pretty save for the warranty.
Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.
tjado said:
Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.
Click to expand...
Click to collapse
Have you tried other sim card on your phone and see what happens? Have you checked the sim card slot and see if there is nothing that's interfering the phone signal?
this is the same thing that is happening to me and there is no obstruction or anything interfering with the sim card connecting to the phone eventually i gave up on looking for a fix. So now i reverted to using my opal So the TyTn II just became my pocket pc now im going to flash wm6.5 jijijijijijjijiji but if somebody finds a fix please post it cause the tytn II was awesome but now its dead.
Same problem here
I'm having the same problem here. Already changing the sim flex and sim card reader, but still no improvement. Is there anything that I can do for this problem?
does anybody ever changing the upper board? is there any result?
same thing hapened to me..
tried sim in another phone and it works, tried another sim in the kaiser and no sim detected??
almost the same problem with my 8925
I have WM6.1 on it. It some time has a good reception, but in several minutes it says The SIM card is missing. Then it (not always, but sometimes) finds SIM itself. strange thing is, that if I flash WM6.5, it has almost no problems but it looses sound and camera doesn't work either...
Any ideas?
Thanks beforehand!
Tried Sim Card Flex replaced.
tjado said:
Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.
Click to expand...
Click to collapse
> I did exactly just all that, using a Windows Mobile 6.5 Rom.
> After replacing the Sim Card Flex but Sim card still unreadable.
> Currently using back my Wizard, was thinking of changing the Flex Ribbon Cable but skeptical it will work unless someone have tried it.
> Found it on Ebay, check it out.
> http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=280555578532&ssPageName=STRK:MEWAX:IT
> Hope this helps abit
Almost the same with my Kaiser. The only difference, it doesn't show "No Service" message, shows network icon and name, but not available for calling. From time to time becomes available, after few seconds no more! After several hours of such unstable working, drops network at all, with no chanse of restoring it unless switching phone off/on. After that, performing as before.
I have installed a numerous versions of Roms and Radios, ranging from WM6.0 to WM6.5, tried Android, tried almost every combination of band, frequency, hsdpa and data setting with no help.
Is it possible hardware failure?
I did notice a micro switch in the sim card slot when I was tearing down my unit.. perhaps you want to play with the switch to see if other position may solve your issue.
same issue here...
tried everything...
Dear All,
Have you tried to connect an GSM external antenna to check if it improves the reception ?
Regards,
Nino
Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.
mtty fix
has anyone tried this? I'm having the same problem where my phone says no service and sim card missing, but i'm afraid to be the first to try this mtty fix as i've never used it before. Can someone confirm that it will fix this problem? Thanks to the guy that put it up ^
aekapolm said:
...My solution is....
Click to expand...
Click to collapse
master aekapolm...
i will try your solution!
aekapolm said:
...
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks...
Click to expand...
Click to collapse
after "info 8" my kaiser formatted... and i can not type "task 2a" ??????
i'm planning to change the flex cable cause mine has a cut in the middle and need to change the lcd due to crack
It's not the SIM card or the switch. That switch you're referring to will shut the phone off in the event that the SIM door is opened.
As for the "no service" issue, I understand that the HSPDA/3G radio part of the phone tends to go bad, especially with certain radio SPLs'. Once it's gone, it's gone for good. The only way to restore functionality is to replace the lower board which contains the radio, which includes the NAND (all your precious data).
I have seen some success with people using the 1.70 series of radio versions but it does not restore 3G/HSPDA, only 2G is functional, and the way networks are changing over to 4G, I don't see much of a future for 2G devices.
My advice... Find a replacement Kaiser with a cracked screen or other problem that doesn't involve the lower board and swap parts.
Out of curiosity, and asking for a mod to help on this:
This post is teaching newbies to KILL their phones, why was this thread revived?
Any newcomer please DON`T DO THE STEPS BELOW!! It will kill your phone.
aekapolm said:
Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.
Click to expand...
Click to collapse
Hi,
I want to buy HTC HD7, but the phone has a problem, when turn it on, the phone enter into bootloader and the computer does not recognize it through USB. How to fix it?
p.s. sorry for my bed english
Use DFT_RSPL_WP7FG1_LAUNCH
and try another SPL Version. For 3 Hours i had the same problem and this has help me
i believe that is a full brick.
rumor has it, jtag fixes that.
google hd7 jtag.
sh4d0w86.