Related
I have a rooted G1
& i have jf's 1.5 build with CM's recovery
But the other day out of being scared that i bricked my g1
i flashed to jf but after i thought i "bricked"
i realized that was normal when installing Hero SPL/Radio
So im think of finally flahing to Hero
but theres two options for me
1. flash he spl/radio again then install JAC's Slow SD hero ROm
2. wait till i get paid next week and buy a new 8gb or 16gb
(does the g1 support 16???) then install Jac's Hero Rom but with Apps2SD
oh and if any body out there with JAC's Slow SD rom does it really differ from the A2sd rom(except 4 the obvious)
An does it give you a decent start off of memory like 70mb internal or something
And since i already installed the hero spl/radio do i need to reflash them in order to install the rom
or can i just go ahead and flash the Slow SD rom
And last does Swapper make a difference on the Slow SD Rom
Thanks in advanced
Because i wont beable to read the replies tonight(maybe)
watchyaself said:
I have a rooted G1
& i have jf's 1.5 build with CM's recovery
But the other day out of being scared that i bricked my g1
i flashed to jf but after i thought i "bricked"
i realized that was normal when installing Hero SPL/Radio
So im think of finally flahing to Hero
but theres two options for me
1. flash he spl/radio again then install JAC's Slow SD hero ROm
2. wait till i get paid next week and buy a new 8gb or 16gb
(does the g1 support 16???) then install Jac's Hero Rom but with Apps2SD
oh and if any body out there with JAC's Slow SD rom does it really differ from the A2sd rom(except 4 the obvious)
An does it give you a decent start off of memory like 70mb internal or something
And since i already installed the hero spl/radio do i need to reflash them in order to install the rom
or can i just go ahead and flash the Slow SD rom
And last does Swapper make a difference on the Slow SD Rom
Thanks in advanced
Because i wont beable to read the replies tonight(maybe)
Click to expand...
Click to collapse
unless you have flashed another spl to your phone you still have the new spl. yes the g1 supports 16gb sdcards. i haven't tried the slow version of hero because i have a class 6 8gb sdcard but you should be able to flash the slow rom just fine. i think it leaves around 30mb of free space but i am not sure and swapper should make it run faster on the slow version set it to 32/30 (swap/swappiness) should give best results. you should invest in a class 6 sdcard though. also if using the swapper app make sure you put the swapfile in /system/sd so it will not corrupt your sdcard when you mount it. if there is anything else i have not covered just ask and i will answer to the best of my ability.
So pretty much since I already flashed the spl/radio from I think it was
Saphire ports or something like I'm able to flash to pretty much any ROM including JAC's Slow SD
With no problems??
And if I flash to JAC's Slow SD ROM today, can I reflash to the A2SD ROM next week when I get a new card
Oh yeah and is there a way to check my spl just to make sure I got the right one?
ohhh and I already know how to check my radio
Go into bootloader (camera+power) SPL:1.33.2005
david1171 said:
unless you have flashed another spl to your phone you still have the new spl. yes the g1 supports 16gb sdcards. i haven't tried the slow version of hero because i have a class 6 8gb sdcard but you should be able to flash the slow rom just fine. i think it leaves around 30mb of free space but i am not sure and swapper should make it run faster on the slow version set it to 32/30 (swap/swappiness) should give best results. you should invest in a class 6 sdcard though. also if using the swapper app make sure you put the swapfile in /system/sd so it will not corrupt your sdcard when you mount it. if there is anything else i have not covered just ask and i will answer to the best of my ability.
Click to expand...
Click to collapse
Well if he goes to JACHero 2.36 he shouldn't use swapper. Just create the linux-swap partition on your sd card and everything is auto from there. You wouldn't want to have the partition and use swapper because that will mess things up. Plus having linux-swap partition compared to swapper makes a huge difference.
supremeteam256 said:
Well if he goes to JACHero 2.36 he shouldn't use swapper. Just create the linux-swap partition on your sd card and everything is auto from there. You wouldn't want to have the partition and use swapper because that will mess things up. Plus having linux-swap partition compared to swapper makes a huge difference.
Click to expand...
Click to collapse
Erm...you mean JACHero 2.63
alritewhadeva said:
Erm...you mean JACHero 2.63
Click to expand...
Click to collapse
Yep my bad. Its to early here at work. lol
So if I create a linux swap patition using paragon partiton ill select "linux swap'
And then flash the rom ??and then after I boot up I won't need to do anything??
Oh and since I will most likely flash to JAC's a2sd rom because I'm going to buy a sdhc card next week
watchyaself said:
So if I create a linux swap patition using paragon partiton ill select "linux swap'
And then flash the rom ??and then after I boot up I won't need to do anything??
Oh and since I will most likely flash to JAC's a2sd rom because I'm going to buy a sdhc card next week
Click to expand...
Click to collapse
JACHero 2.63 will automatically see the linux-swap
Ok well I think I'm going to flash to slow sd for now then next week to a2sd
Oh and just to make sure my radio is 2.22.1.16 or something like that
And my spl is 1.33.2005 so am I all good to flash to jachero
and I have linux swap so I can flash right???
Oh and how would it most likely take to boot for the first time??
Thank you in advance
watchyaself said:
Ok well I think I'm going to flash to slow sd for now then next week to a2sd
Oh and just to make sure my radio is 2.22.1.16 or something like that
And my spl is 1.33.2005 so am I all good to flash to jachero
and I have linux swap so I can flash right???
Oh and how would it most likely take to boot for the first time??
Thank you in advance
Click to expand...
Click to collapse
Yep as long as you got the spl and radio you good. You really don't have to have the linux-swap partition but if you do it will pick it up automatically. And it shouldn't take a long time to boot up the first time.
Thanks man I really appreaciate the help
And from everyone els to
Oh and one last ?
Since I'm going to flash to the slow sd rom
When I reflash next week to a2sd jac with my new 4 gig or 8 I'm not sure do I have to prep the card
With the recovery img
Fat32
Ext3 and the linix swap
And it would turn on fine??
Oh and is ext3 a replacement for ext2
So that meaning all my apps on ext3
Music photos etc.. on fat32
And linux swap is what??
I think I'm confused here
I just want to make sure that next week I don't muck up my g1
watchyaself said:
Thanks man I really appreaciate the help
And from everyone els to
Oh and one last ?
Since I'm going to flash to the slow sd rom
When I reflash next week to a2sd jac with my new 4 gig or 8 I'm not sure do I have to prep the card
With the recovery img
Fat32
Ext3 and the linix swap
And it would turn on fine??
Oh and is ext3 a replacement for ext2
So that meaning all my apps on ext3
Music photos etc.. on fat32
And linux swap is what??
I think I'm confused here
I just want to make sure that next week I don't muck up my g1
Click to expand...
Click to collapse
You won't have to do anything with the recovery img because that is already on your phone. The ext3 is just like the ext2 but suppose to be safer for the card so yes all your apps will be on there and photos, music, videos and everything else on your fat32. The linux-swap is basically like giving your phone more ram. If you need help formating your card I have a tutorial in my sig on how to set everything up.
supremeteam256 said:
You won't have to do anything with the recovery img because that is already on your phone. The ext3 is just like the ext2 but suppose to be safer for the card so yes all your apps will be on there and photos, music, videos and everything else on your fat32. The linux-swap is basically like giving your phone more ram. If you need help formating your card I have a tutorial in my sig on how to set everything up.
Click to expand...
Click to collapse
His tutorial is very good and I noticed a HUGE difference moving from swapper app to linux-swap as its own partition.
Oh how big do i make Linix Swap
Anybody??
32MB is fine for swap.
help with my sdcard
Hey guys I was wondering if any of you can help me out get more space on my phone i formarted my sdcard to ex2 and linux_swap and i still get 70mb plz help I nee dthe space I'm running the latest jachero
it saves to the sd automatically
i think
it doesnt show as merged internal/sd
it just saves to sd
help
is not showing anything it keep making my internal memory smaller
well idk what to say maybe
reflash hero then see if that works
oh and are you sure you didnt download his Slow SD ROM
if you dont know what that is its basically JAChero but with apps to internal memory maybe you did that
because thats what is sounds like
Im makin swap in Paragon but, its only letting me put 33.1mb not 32 is that fine or will it make JAC Unstable???
watchyaself said:
Im going to install JAChero
Im gonna make a linux swap and a ext 3 from paragon partition manager
my question is how big do i make linux swap
And is it safe to make etx3 for apps from this program
And if i cant do i make a ext 2 then update it to ext3 with terminal
Click to expand...
Click to collapse
32MB is a good size. Larger, and you'll get instability. Yes, it is safe to make your ext3 with Paragon. And yeah, you can upgrade an ext2 to ext3 using Cyanogen's Recovery Image if you don't make it ext3 in Paragon.
yo thanxs bro
ill see what happens
well im trying to do it with paragon
and its only letting me put in 33.1mb will it
make it unstable????
watchyaself said:
well im trying to do it with paragon
and its only letting me put in 33.1mb will it
make it unstable????
Click to expand...
Click to collapse
That's fine.. It doesn't need to be precise.
hey saiboogu
i just flashed hero but it looping at the screen with the little android guy
what did i do wrong how do i fix???
Saiboogu said:
That's fine.. It doesn't need to be precise.
Click to expand...
Click to collapse
I was told 32 could be to small and you might need as high as 92...... whenever i did 32 it still was laggy .
talltexan said:
I was told 32 could be to small and you might need as high as 92...... whenever i did 32 it still was laggy .
Click to expand...
Click to collapse
I've heard a random report or two of people using big swaps, but general experience (personal, plus other users chiming in here) is that as the swap gets bigger, the stability goes down. The system may be fast in the beginning, but as junk collects in your swap it will get laggy.
Honestly, I'm still on 24MB.. Left 32MB of space but only started with 24MB, and it runs fine for me. Keeps my browser in memory when I go reply to a text, that's what I worry about.
I followed the exact steps from this forum and everything went smooth, but why is it that i only have 20 mb of free phone memory left after doing a new hero rom flash using jachero 2.7.4, is the apps automatically save to sd, cause if they are i dont think they are saving to the sd card, also do i have to do a linux swap or something like that to make this phone run faster, please help me people.
Demoyo23 said:
I followed the exact steps from this forum and everything went smooth, but why is it that i only have 20 mb of free phone memory left after doing a new hero rom flash using jachero 2.7.4, is the apps automatically save to sd, cause if they are i dont think they are saving to the sd card, also do i have to do a linux swap or something like that to make this phone run faster, please help me people.
Click to expand...
Click to collapse
hero rom is much bigger then the normal G1 rom that is why you are seeing the lag. What is the size of your linux swap and what is your swappiness set to?
Demoyo23 said:
I followed the exact steps from this forum and everything went smooth, but why is it that i only have 20 mb of free phone memory left after doing a new hero rom flash using jachero 2.7.4, is the apps automatically save to sd, cause if they are i dont think they are saving to the sd card, also do i have to do a linux swap or something like that to make this phone run faster, please help me people.
Click to expand...
Click to collapse
sorry to say this, but if your asking if you need linux-swap you obviously didn't read the instructions
ccyrowski said:
sorry to say this, but if your asking if you need linux-swap you obviously didn't read the instructions
Click to expand...
Click to collapse
devs and testers need a new forum imo...
springah said:
devs and testers need a new forum imo...
Click to expand...
Click to collapse
no we dont we just need to remove all noobs!
Demoyo23 said:
I followed the exact steps from this forum and everything went smooth, but why is it that i only have 20 mb of free phone memory left after doing a new hero rom flash using jachero 2.7.4, is the apps automatically save to sd, cause if they are i dont think they are saving to the sd card, also do i have to do a linux swap or something like that to make this phone run faster, please help me people.
Click to expand...
Click to collapse
well the little room after flash is probably due to the sdcard NOT setup right... I had that build before and the before and so on and the space I had every time was 84mb free after boot and YES the appstosd on this build is automatic. The sdcard should have the fat32 partition first and then the ext2 partition 2nd. To setup the partitions I would NOT use ubuntu .. I ran into mounting issues with gparted .. I have had NO issues with the sdsplit found here
http://forum.xda-developers.com/showpost.php?p=3582509&postcount=52
set the 2 partitions first and then setup the linux-swap partition using ubuntu .. I had mine inbetween the fat32 and the ext2 .. and YES you NEED the swap partition in the 2.7.4 build as it no longer uses swapper.
Drizzy Drake Rogers said:
no we dont we just need to remove all noobs!
Click to expand...
Click to collapse
How about we take the "New Thread" privileges away from everyone except for developers or new developers who request the mods give them privilege to open a new thread?
Drizzy Drake Rogers said:
no we dont we just need to remove all noobs!
Click to expand...
Click to collapse
Goodbye to 80% of the members then lol. just keeding. I think people just need to learn how to read the first post of each thread they read. I recommend setting min/max cpu freq to 528, and having linux-swap of 32MB at 20 swappiness. @ demoyo, make sure you have your partitions at the least in this order:
FAT32/EXT3
or if you want a linux-swap:
FAT32/EXT3 (1.5GB or less) /Linux-Swap (32 to 64MB)
The 20MB free internal memory is signaling that your apps to sd isn't working properly, which probably mean you didn't partition your sdcard correctly.
Drizzy Drake Rogers said:
no we dont we just need to remove all noobs!
Click to expand...
Click to collapse
I should be a mod, I'd close and move this dumb stuff like crazy
thankx guys i am a noob
i really appreciate all the help guys, and yes i believe i didnt do the partion right all i want to do is help the rom not be so laggy, im usung win xp to do all this, but one more thing, my rom doesnt have the swappiness app built in like ive seen in others peoples vids how do i get it
Demoyo23 said:
i really appreciate all the help guys, and yes i believe i didnt do the partion right all i want to do is help the rom not be so laggy, im usung win xp to do all this, but one more thing, my rom doesnt have the swappiness app built in like ive seen in others peoples vids how do i get it
Click to expand...
Click to collapse
You don't use the Swapper app anymore. As long as you have a linux-swap partition done correctly it is automatic. You can however change the swappiness settings in /system/bin/a2sd (it is the number in echo 30 > ...)
ok so im a noob, even with the dummie walkthroughs and all, i still quite dont understand swapping, so i have a 1gb memory card already in the phone formated to fat32, i have hero rom jachero 2.7.4, and u said linux is already in it and i dont need swap, can u pleasae tell me how to do swapper with a tutorial for dummies for bigger dummies lmao, i need help dont understand lol i would love you people forever and stop buggin u
Hang in there I am the same way learning all the new ropes and I myself dont understand the swap settings eaither
Demoyo23 said:
ok so im a noob, even with the dummie walkthroughs and all, i still quite dont understand swapping, so i have a 1gb memory card already in the phone formated to fat32, i have hero rom jachero 2.7.4, and u said linux is already in it and i dont need swap, can u pleasae tell me how to do swapper with a tutorial for dummies for bigger dummies lmao, i need help dont understand lol i would love you people forever and stop buggin u
Click to expand...
Click to collapse
Ideally you need an ext and linux-swap partitions, but if you don't want to for whatever reason you can just install the "Swapper" app from the market. A linux-swap partition is much better but this is the next best thing.
AdrianK said:
Ideally you need an ext and linux-swap partitions, but if you don't want to for whatever reason you can just install the "Swapper" app from the market. A linux-swap partition is much better but this is the next best thing.
Click to expand...
Click to collapse
Well said. ANother note is that if you are using the stock 1gb card then you will not notice much speed improvement no matter what you do because of having such a slow SD card. I would not recommend and thing less than a class 4 (Class 6 is the fastest).
If you plan on staying with the stock card you should probably look into another ROM.
I started off with cyanogen 4.0.4, I like it, but it seems to lag a lot when I open/close the screen, when the screen view changes from side to side to up and down. I have a 4gb (I think its class 4) card, and I formated it with like 3.xxgb fat32, then 512mb ext3.
So I decided to format the card and try hero (latest non-experimental version).
I like it better, but everytime I touch something it gives me a TouchFlo force close error. I tried reformatting the card and re wiping/flashing the update, no go. For hero I had 3.xx fat32, 512 ext3, and 32 swap.
For both builds I had cyanogens latest recovery, the latest radio, and the latest spl (hykaro, I think I spelled that wrong lol)
So, am I doing something wrong? My friends g1 has the cyan 4.0.4 build on a 2gb card I believe, and his is smokin fast compared to mine.
Someone help me out, I don't know what I'm doing wrong.
At this point I think I wanna keep the hero build, but I need to solve the touchflo issue. If not, ill be fine with cyanogen's, but ill just run the hero theme on it.
Also, if I go with cyanogen, should I run a swap partition or no?
The swap partition really increases the speed of the Rom, Are you running apps2sd?
my suggestion is make a swap partition and set up usernint.sh so you can use both compcache and swap on Cyanogen 4.04. It should speed it up a lot. Link in my signature.
jad011 said:
The swap partition really increases the speed of the Rom, Are you running apps2sd?
Click to expand...
Click to collapse
with hero i was, as i understood, it does apps2sd automatically?
with cyanogen 4.0.4, im not sure if i was, if it had to be set up, i may not have been and that might be part of the reason. how do u ensure that im running apps2sd?
AdrianK said:
my suggestion is make a swap partition and set up usernint.sh so you can use both compcache and swap on Cyanogen 4.04. It should speed it up a lot. Link in my signature.
Click to expand...
Click to collapse
ill try that now. should i stick with 4.0.4, or the experimental (which i heard is pretty stable, or am i wrong?)
also, i think i may order an 8gb class 6 like you have linked in your sig, hell for 17 bux, might as well.
and in your sig, what is that "xROM" you have listed after cyanogen? do i need that as well?
ufvj217 said:
with hero i was, as i understood, it does apps2sd automatically?
with cyanogen 4.0.4, im not sure if i was, if it had to be set up, i may not have been and that might be part of the reason. how do u ensure that im running apps2sd?
ill try that now. should i stick with 4.0.4, or the experimental (which i heard is pretty stable, or am i wrong?)
also, i think i may order an 8gb class 6 like you have linked in your sig, hell for 17 bux, might as well.
and in your sig, what is that "xROM" you have listed after cyanogen? do i need that as well?
Click to expand...
Click to collapse
To check A2SD is running, check how much free space you have on your ext (Settinds > SD card > Secondary) install a couple of big apps - "Bonsai Blast" is 6MB - and check to see if free space has gone down. It A2SD is working it should have done.
4.04 or 4.1.11.1 doesn't really matter. I had a few acore FC's on 4.11.1.1 so 4.04 is your best bet. Could be my fault for not wiping though.
xROM is just...a ROM basically I believe it's based on CM 4.04 but it's themed up and looks awesome
so is the xROM different than 4.0.4? or am i confused.....lol
anyone have any idea on the issue im having with loading Hero? i just wiped and reloaded, and im still getting TouchFlo force close constantly.
anyone else having this issue?
Wipe your ext partition before wiping and flashing:
Go to Terminal:
Rm -rf /system/sd/*
Reboot recovery
Wipe
Reflash
oh, so when im in recovery, and i do alt+w, that wipes what? i thought it wiped everything? that might be the reason, ill try what you said.
although i even reformatted the card completely, then put hero on it and it still is doing it (randomly)
i had it working just now for bout 5-10 minutes then it started again.
also, when i went to wifi tethering, it says my kernel doesnt support it or something (didnt catch the whole error, ill try to copy it down if i see it again after wiping/reinstalling)
is there any reason to run hero over say....cyanogen 4.0.4 with a hero THEME? what are the advantages to running the actual Hero rom?
ESKIMOn00b said:
Wipe your ext partition before wiping and flashing:
Go to Terminal:
Rm -rf /system/sd/*
Reboot recovery
Wipe
Reflash
Click to expand...
Click to collapse
i got rm failed for -rf, read-only file system
Yeah try wiping the whole sd card, not just the fat32 partition. Maybe your sd card is going bad? see if you can borrow another and give it another shot.
If he formats through the terminal app does he have to issue su before the other commands? Its been a while since I did mine sry.
I got Cm 4.04 and it works pretty fast on my 8gb class 4 card. I had some lag issues once I installed a few apps. I guess they didn't agree with the either the rom or the hero theme I have lol. Got rid of them and its back to normal. was the SayMyName and TTS Library....in my case tho. It might just be my phone running out of ram, not to sure tho.
And If Im not mistaken, Apps2sd is automatic on the rom.
i got that command to work, i forgot to SU.
i have an extra 1gb laying here, ill try that to see if it does anything different.
i just ordered an 8gb class 6 so that should be here soon anyways.
whats the difference in running hero, vs cyanogen 4.0.4 with a hero theme?
I'm not sure what the difference is but just to clarify my lag issue..
I have around 20ish apps installed. Everything still works pretty good. I just happen to install an app that must have intergrated itself in the system files or something and slowed and almost locked my phone up. Maybe it was the app maybe it wasnt. After I un installed it, things were back to normal.
From what I've been reading Hero is alower then the normal normal G1 builds. I'll have to try a hero build soon. Goodluck.
yea ive tried 2 different hero builds, i overall think cyanogen's 4.0.4 is what i like best, and ill just run the hero theme, i like the theme alot.
the only thing on that as far as lagging goes, is when i open the screen, it switches to landscape view fine most of the time, but when i close it, probably 7 times out of 10, it will lag when switching back to portrait view. the screen goes blurry when its switching (like when you go to power down the phone), for sometimes 2-3 seconds until it switches. i dont remember this happening when i had the stock software on the phone.
any ideas? im going to try the other SD card in a few minutes here just to test it.
ok so upon further review, it seems to only lag when the screen switches from landscape to portrait when the screen is closed. when you physically change the position of the phone, it takes 2, sometimes 3 seconds to switch the screen view. when opening/closing the screen, it switches very fast, as it did with the stock FW.
is this normal?
is there a way to disable that? i really only like it switching screen view based on if the screen is open, or closed.
if its normal, ill have to live with it
I think this is normal. On the normal stock/1.5 builds, the screen will not switch to landscape while the screen is closed on the home screen. It will only change to landscape when you slide out the screen. Is this the transition your talking about? I think its part of the build or theme, the os has to load up additional settings to force it to go to landscape while the screen is closed. For the most part it seems like the os is trying to figure out what position the gsensor/motion sensor thing is in, before it adjusts itself accordingly. I get the same thing on cm 4.04 and on the on the 4.1 I tried once...
soon I will be trying another 4.1 build, I'll let you know the results. nandroid backup is awsome lol
yea thats what im talkin about. i wish i could have it not switch views when the screen it closed, but oh well
im still stuck between hero and cyanogen. i tried xROM (http://forum.xda-developers.com/showthread.php?t=543621) didnt like the layout of that theme.
ufvj217 said:
yea thats what im talkin about. i wish i could have it not switch views when the screen it closed, but oh well
im still stuck between hero and cyanogen. i tried xROM (http://forum.xda-developers.com/showthread.php?t=543621) didnt like the layout of that theme.
Click to expand...
Click to collapse
Note: if you want hero, you MUST have a swap partition. the g1 doesnt have enough ram for hero. you may get forceclosures because the g1 is running out of ram without anything even running. you need a swap of atleast 32mb. jac recommends 64mb and i along with a majority use 96mb swap
you know what, that might be it. i did have a swap partition, but there is a command or something you have to do to make the phone USE the swap parition right? if thats the case, that might very well be why it keeps FC'ing.
i ordered an 8gb class 6 sd card, should i do more than a 96mb swap? or is 96mb plenty?
Probably a stupid question, but that's sort of what this forum's for i suppose. I've got a new class 6 card winging its way to me. I'm not overly fussed about a2sd, but want to set up a linux swap partition on my phone to make hero/eclair roms run a little less frustratingly. i've got the latest amon ra recovery and can see on there that i can partition direct from the phone in a couple of clicks. can i set up swap without an ext2/3/4 bit or is it an all or nothing situation? because i tend to switch roms from various nandroid backups i've got saved, i don't want the apps to go all screwy. and what is a good swap size. too big can slow it down, right?
Sorry if it's been covered many many times before.
Alphabet Soap said:
Probably a stupid question, but that's sort of what this forum's for i suppose. I've got a new class 6 card winging its way to me. I'm not overly fussed about a2sd, but want to set up a linux swap partition on my phone to make hero/eclair roms run a little less frustratingly. i've got the latest amon ra recovery and can see on there that i can partition direct from the phone in a couple of clicks. can i set up swap without an ext2/3/4 bit or is it an all or nothing situation? because i tend to switch roms from various nandroid backups i've got saved, i don't want the apps to go all screwy. and what is a good swap size. too big can slow it down, right?
Sorry if it's been covered many many times before.
Click to expand...
Click to collapse
When it asks for the ext size just scroll to 0.
The apps shouldn't get screwy, but sometimes they do. I went back to a cyan once and phone would force close after restoring, but that was only one time
For Hero/eclair I suggest 64-96mb
cheers
seems sensible enough. thanks. If i were to set up an ext partition, whack my apps on there and then change from, say, super d to hero, would the world go crazy? be it flashing an update.zip or restoring from nandroid?
ahh, just realised the answer myself
nandroid backup + ext for each image i'm keeping, wipe everything, restore...
Alphabet Soap said:
seems sensible enough. thanks. If i were to set up an ext partition, whack my apps on there and then change from, say, super d to hero, would the world go crazy? be it flashing an update.zip or restoring from nandroid?
Click to expand...
Click to collapse
You couldn't, hero requires you to wipe everything each time you flash it. Even when going from hero to hero.