Related
ive installed Shogun_A_La_Carte_Cingular_WWE_2 rom in my wizzard ... and now i cant connect to active sync thru usb neither can i charge it .... its like my USB port is dead...
can ne1 tell me how to revive the usb port ...
or is dere ne other way to flash sum other rom on my wizzard ..... like i can get ne size of rom or cab file on my mem card ive got a 2gb one.
please help me here really scared
if it helps dis is all that it show s in the starting
ipl 1.05
spl 1.05
os 2.26 10.2
thanx waiting for ur replies
It's not a problem of the ROM. I did the exact same thing. It's a problem of the old bootloader with the newer ROM. I finaly got it corrected by going into bootloader mode and updating the ipl/spl to 2.xx. This corrected the problem and
the phone works great with Shogun's rom. Love it.
Here's your step by step anwser
I had installed the same software for a T Mobile MDA for a Cingular Network. The ROM disabled my sync and I was ****ting bricks because I could not update my ROM, nor make calls from my wizard.
step 1. turn off the device by holding down the power button on top of the phone.
Step 2. press the camera button (right hand side) and the power button at the same time to on the device.
Step 3. This puts the device into USB mode, which you will now plug in the USB cable. (the word "USB" will appear on the bottom of the pocket pc screen when it is configured to the computer.) Active Sync will not sync up to the pocket pc (remains grayed out on the computers title bar.)
step 4. download another ROM version. I downloaded cingular 2.26 shotgun (different version from your ROM, but made for cingular devices) FROM HERE ON, DO NOT DISCOUNT YOUR DEVICE FROM THE COMPUTER!!
step 5. Make sure the device is charged more than 50%, then click and run the ROM. Follow the update prompts; and the computer will recognize that the pocket pc is connected to the usb port, but active sync will be grayed out. Allow the software to be installed. remember, do not disconnect, because you could do serious damage to the bios bank chips and never be able to boot.
once it installs the software, you will be relieved to see the NEW ROM on the boot screen and you'll notice everything works beautiful again
YOU CAN NEVER BRICK A WIZARD, just place in it USB MODE and start over. For the intelligent people, backup your information with Active Sync if you dare to experienment with new ROMs.
GOOD LUCK MY FRIEND,
Adam
aoakes said:
YOU CAN NEVER BRICK A WIZARD, just place in it USB MODE and start over.
Click to expand...
Click to collapse
If you screw your IPL/SPL then your Wizard will be bricked....just try
Molski
molski said:
If you screw your IPL/SPL then your Wizard will be bricked....just try
Molski
Click to expand...
Click to collapse
Wouldn't it be better to release your ROMs without the IPL/SPL then? Would also save you the trouble of having separate G3 and G4 versions--please don't misunderstand me, I appreciate the work you and everyone else on this forum do with no expectation of payment, but it would seem we might all be better off ROM-upgrading without and IPL/SPL, at the very least it might save some noob like naeemwaqas who doesn't know any better...just my suggestion.
here is your answer from me... it has mostly been covered..
YES hold your camera button while powering on to put in bootloader mode
DO NOT FLASH MY ROM.. yet
YES download an official rom so that you can get the updated bootloaders
after that is complete then you can flash my rom...
I DID NOT include updated bootloaders because i didnt want for a noob with a G4 to brick their phone by flashing my rom.. my future releases will be labeled as G3 and G4.. if a noob screws it up from there then its not my fault
jorge_culv said:
Wouldn't it be better to release your ROMs without the IPL/SPL then? Would also save you the trouble of having separate G3 and G4 versions--please don't misunderstand me, I appreciate the work you and everyone else on this forum do with no expectation of payment, but it would seem we might all be better off ROM-upgrading without and IPL/SPL, at the very least it might save some noob like naeemwaqas who doesn't know any better...just my suggestion.
Click to expand...
Click to collapse
but then if their IPL/SPL are of 1.xx versions, their upgrade also won't go so well. If only people would do their research before jumping into such dangerous thing..
vseehua said:
but then if their IPL/SPL are of 1.xx versions, their upgrade also won't go so well. If only people would do their research before jumping into such dangerous thing..
Click to expand...
Click to collapse
but also your looking at this the wrong way... if the ipl/spl would have been included and if he had a G4 then he would now have a brick... however he is at a point to where he can recover from...
aoakes said:
I had installed the same software for a T Mobile MDA for a Cingular Network. The ROM disabled my sync and I was ****ting bricks because I could not update my ROM, nor make calls from my wizard.
step 1. turn off the device by holding down the power button on top of the phone.
Step 2. press the camera button (right hand side) and the power button at the same time to on the device.
Step 3. This puts the device into USB mode, which you will now plug in the USB cable. (the word "USB" will appear on the bottom of the pocket pc screen when it is configured to the computer.) Active Sync will not sync up to the pocket pc (remains grayed out on the computers title bar.)
step 4. download another ROM version. I downloaded cingular 2.26 shotgun (different version from your ROM, but made for cingular devices) FROM HERE ON, DO NOT DISCOUNT YOUR DEVICE FROM THE COMPUTER!!
step 5. Make sure the device is charged more than 50%, then click and run the ROM. Follow the update prompts; and the computer will recognize that the pocket pc is connected to the usb port, but active sync will be grayed out. Allow the software to be installed. remember, do not disconnect, because you could do serious damage to the bios bank chips and never be able to boot.
once it installs the software, you will be relieved to see the NEW ROM on the boot screen and you'll notice everything works beautiful again
YOU CAN NEVER BRICK A WIZARD, just place in it USB MODE and start over. For the intelligent people, backup your information with Active Sync if you dare to experienment with new ROMs.
GOOD LUCK MY FRIEND,
Adam
Click to expand...
Click to collapse
You sir, are an idiot! And shouting such nonsense just proves my point. Please run away... and very fast before someone actually believes your bu!!!**** and bricks their device!
You sir got lucky, you obviously don't have a G4 phone, cause I double dog dare you to try such insanity on a G4.
I've flashed more phones than the average guy and I'm STILL careful.
I'm sure that you probably meant no harm but if you noticed, none of the chef's here have stated such BS...
molski said:
If you screw your IPL/SPL then your Wizard will be bricked....just try
Molski
Click to expand...
Click to collapse
Heya molski, wanna go have a drink together and watch this loser cry in his beer after he "slips" ...
shogunmark said:
here is your answer from me... it has mostly been covered..
YES hold your camera button while powering on to put in bootloader mode
DO NOT FLASH MY ROM.. yet
YES download an official rom so that you can get the updated bootloaders
after that is complete then you can flash my rom...
I DID NOT include updated bootloaders because i didnt want for a noob with a G4 to brick their phone by flashing my rom.. my future releases will be labeled as G3 and G4.. if a noob screws it up from there then its not my fault
Click to expand...
Click to collapse
Whoa, easy there samurai! My suggestion was directed at Molski, who as far as I can tell still packages up IPL/SPL in his ROMs unlike you. Thanks for pointing this crucial difference out to those who might not know otherwise.
And again, for Molski, this is just a suggestion--there have been plenty of ROM upgrades with IPL/SPL and the vast majority go fine, just seems like as a community we might want to consider doing things (like ROMs with no IPL/SPL for example) to protect newcomers. Now sure they might deserve it every now and again, and scaring the crap out of them might induce a healthy dose of "read before you leap", but could be avoided for this one situation.
jorge_culv said:
Whoa, easy there samurai! My suggestion was directed at Molski, who as far as I can tell still packages up IPL/SPL in his ROMs unlike you. Thanks for pointing this crucial difference out to those who might not know otherwise.
And again, for Molski, this is just a suggestion--there have been plenty of ROM upgrades with IPL/SPL and the vast majority go fine, just seems like as a community we might want to consider doing things (like ROMs with no IPL/SPL for example) to protect newcomers. Now sure they might deserve it every now and again, and scaring the crap out of them might induce a healthy dose of "read before you leap", but could be avoided for this one situation.
Click to expand...
Click to collapse
which is why i dont... i may know quite a bit, but im not a master, i dont know it all (dont tell my wife) and dont include ipl/spl for that simple fact.. but can garuantee this guy will read more before experimenting again... its a good scare factor, and a good way to welcome him to the board
hehehe...this is how we learn. But in some countries you could be shot for spreading such blasphemy. Peace and love brothers.
Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963
ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up
Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.
post the present IPL/SPL it displays now.Which rom you are trying to flash now ?
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.
If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)
lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!
May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC
kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!
try this: http://forum.xda-developers.com/showthread.php?t=276963
Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.
Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?
Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?
Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.
Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.
Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked
Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?
If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.
many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.
Hi
I am having some problems when trying to upgrade my Orange SPV M700 to Hard SPL. I have followed the instructions given in "TrinityGuides.info" but I am not convinced the Hard SPL has actually worked okay. This is what happens:
1) I follow the initial instructions (run ROMUpdateUtility.exe) and click on the various screens ("I understand" "I completed") etc
2) I get to the point where the screen says "You are now ready to update your ROM image. This operation takes approximately 10 minutes"
3) I then click on "Next", the progress bar screen appears and I get the message on my SPV about running programs - I select 'yes' on the SPV.
4) Immediately I hear the Windows XP 'dum-dum' noise letting me know that a USB device has been disconnected. Also my ActiveSync is gone. I have not done anything to cause this though - the connection just goes down.
5) I then get a message telling me that the device is not connected and I have to exit the Hard SPL routine.
6) After reading the FAQs on TrinityGuides.info I re-run the "ROMUpdateUtility.exe" and get to the progress bar screen again. This time I see the grey screen on the SPV, with progress bar rapidly completing on both the SPV and my Desktop screen progress bar.
7) After literally a few seconds I get a screen telling me "Congratulations! Your ROM update is now complete etc"
Even though I see the congratulations message I am not convinced it has successfully installed Hard SPL.
Firstly, whereas the messages suggest it can take up to ten minutes to do the Hard SPL mine only takes a few seconds. Secondly, when I follow the TrinityGuides.info instructions on how to check the Hard SPL (by pressing power, camera and soft reset) I see this:
On my tri-colour screen this is displayed:
IPL-0.50
SPL 1.07.0000
The "TrinityGuides.info" instructions say that I should see this:
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
I have tried both the "Hard SPL 1.20.Olipro" and "Des' Crash-Proof SPL" but nothing makes any difference to the display I see.
Can anyone help me? I am concerned that if I don't have the Hard SPL correctly installed I am going to risk bricking my SPV if I try upgrading the ROM, unlocking the SIM etc (which is what I want to do). Is there any other way I can tell whether Hard SPL is installed correctly?
Thanks in anticipation!
Spivvy
If i remember correctly hard SPL is a quick process, it's the ROM flashing that takes ten minutes or so. As to why it's not working i can't offer any help, sorry.
Hi DeeDee
Thanks for taking the time to reply. If, as you say, the Hard SPL does happen very quickly (in my case it seems a second or so) then that's good to hear as I was sure something had gone wrong.
Does anyone know if what I see on my tri-colour screen is correct? (i.e. IPL-0.50, SPL 1.07.0000) as before I proceed with any more drastic updates I'd like to make sure my SPV is protected against bricking.
Thanks again
Spivvy
UPDATE.....
I spotted this person's solution to what seemed to be a similar problem to mine:
http://forum.xda-developers.com/showthread.php?t=382246&highlight=ActiveSync+disconnects
I decided to try his fix. I used Olipro 1.20 Hard SPL.
The Hard SPL procedure did continue in a more convincing manner than my previous attempts, and the progress bar took a bit longer to complete, and I also received a message telling me that the operation was successful. I then did a soft reset and felt that maybe this time it had worked.
In a rare moment of feverish optimism I pressed the buttons to check the SPL version now on my Orange SPV (power, camera and soft reset). However, it is still telling me this:
IPL-0.50
SPL 1.07.0000
i.e. nothing seems to have changed. No sign of Olipro's SPL again.
In a word, I am flummoxed.
In two words, I am very flummoxed.
So, I am still putting out an appeal to you clever bods as to how I establish if I have a safe Hard SPL on my Orange SPV, or is it still looking a bit iffy (a technical term for "not very good")
Thanks
Spivvy
i am seeing the latter version with OliPro SPL, OK it's v1.2 but it's still different from yours.
Are you trying this on Vista or XP, personally i have always used XP for flashing. Whether that's going to make any difference i don't know.
I have a question along similar lines, although not identical. I'm completely unable to get from the triband screen to the bootloader screen. I'm trying to flash from my mini-SD card, but one it gets into that SSPL triband screen, it doesn't do a thing. I'm running vista on my PC, and can't seem to get any useful action trying to flash from there. Getting a little frustrated, cause I haven't even been able to SIM unlock my phone so far... Considering going the IMEI route, although that won't do anything for bootloader and upgrapding ROM later on... Any advice, or should I just use IMEI and go the easy way?
Dan
Hi DeeDee
I am using Windows XP, which I think is the preferred OS for this type of operation. Very puzzling.
Thanks
Spivvy
Hmmmm.....
It's looking like I am not going to resolve this problem as no one has posted an actual solution. I am not sure what to do now - my gut feeling is that my SPV M700 has not been Hard SPLed (based on what it displays as described earlier).
All I know is that I have followed the TrinityGuides instructions (and other postings with information about this type of thing) accurately. I have done it several times (using both Olipro 1.2 and Des Crash Proof) - but, for some inexplicable reason, my SPV M700 would appear to refuse to accept the Hard SPL.
As no one has said otherwise I have to assume that the tri-colour screen information I see in bootloader mode does mean that I have not successfully SPLed?
I can't understand why some (in fact most) people seem to get the Hard SPL flashing performed okay and yet mine refuses. I know from searching the postings that there are a few unlucky souls like me who have not been able to do it successfully.
If anyone does have any suggestions I really would be grateful to hear them, but for now it looks like I have drawn a blank. Pity.
I have run out of ideas - could it be some other program I have installed is interferring with the process? Is it my version of ActiveSync (4.5.0)? Is it some setting I have got on the SPV M700 that is preventing the Hard SPL? There surely has to be a reason why the Hard SPL is not working?
Still hanging on, hoping that some shaft of light might shine on my SPV M700 one day...
Ho hum...
Spivvy
Hey u are not alone, my Trinity ( Dopod D810 variant ) just simply refuses to flash to any hard spl as well, same problem as yours, i am using windows xp to flash so i doubt its the driver problem.
I found a solution to this problem though, i use SSPL to flash cooked rom to my device.
http://forum.xda-developers.com/showthread.php?t=293632
Just paste the .exe onto your trinity and open it using file explorer, it should enter bootloader with a "by des" behind the bootloader number, it should be safe to flash then.
I tested flashing WM 6.5 by savesaint, Finix's 6.1 with no problem
ADDons: Anyway the reason i suspect is because my one has been flashed with HTC P3600 rom, yes, by HTC without dopod branding, hence the problem
Hi there - thanks for that tip. I will try that link you suggested, and have a go with the file. I'll get back to let you know how it all went.
Many thanks for taking the time to post your suggestion.
Cheers
Spivvy
Hi
I thought I would report back as to the progress (or lack of it) regarding the failure to Hard SPL my Orange SPV-M700. There's not much to report I'm afraid, which may be largely to do with my lack of confidence etc.
I checked out the link suggested above by "/b/-TarD" (using SSPL to flash cooked rom to device - as described at:
http://forum.xda-developers.com/showthread.php?t=293632
However, when I read the various posts and experiences I still felt that this might not be the solution I was looking for. I am not very technical with all this ROM flashing but the original Hard SPL method seemed to me to give me some insurance against bricking my SPV-M700. This SSPL does not seem to leave you with a Hard SPLed device (I am not exactly sure what it does to be honest), and in fact some people seem to have had quite difficult problems after using it.
Call me a cowardly old geezer but I have backed away from trying the suggested solution at the moment (but still very grateful to user "/b/-TarD" for his suggestion).
My aim was to:
1) Get the basic HARD SPL on my SPV-M700 - Olipro or Des, but having followed all the Trinity guides faithfully, it would appear that my device doesn't wanna play ball with me — very frustrating.
2) Re-instate/upgrade the GPS radio thingy (which I believe you lose after you Hard SPL)
3) Unlock my Orange SPV-M700 so that I can use any SIM card in it
4) Then, finally, consider upgrading the ROM to one of the newer WM6 versions, or a better WM5 version.
But, at the moment, it would seem that it's not to be.
Ho hum....