Softreset program for htc diamond - Touch Diamond, MDA Compact IV General

hello,
is there an application that will add a SOFTRESET icon inside start >> programs?
something like the softreset icon of spb shell
thanks

There are plenty. Just search for "soft reset application" and take your pick. Can't really recommend one, since they all do the same thing....
But the soft reset button is easily accessible on the Diamond. It's in the stylus silo. Because of that, I never had a use for soft reset programs when I was using the Diamond.

Soft reset apps
thanks a lot dude.. i'll give it a try ^_^
godbless

Related

ORANGE + Phonepad Nightmare!

Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
me too
i have been asking about this too the last day or so. the dopod rom has it built in but i am worried that once i have put the dopod rom on then i cant go back to the orange one if i dont want to keep the phone.
No one seems to be replying about dumping my original orange rom so at the mo we are a bit stuffed.
warnysouth said:
Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
Click to expand...
Click to collapse
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
It will work, u just need some hack
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
warnysouth said:
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
Click to expand...
Click to collapse
Install phonepad, then G4 SIP tweak, then select phonepad as startup SIP in G4 SIP Tweak, soft-reset. It works for me.
warnysouth said:
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOOOOOOOOOHOOO PHONEPAD UP ON THE ORANGE! uninstall phonepad, install G4 tweak, install phonepad international, and bobs your uncle! THANK YOU VERY VERY VERY MUCH
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
Yeah I just did a fresh install of everthing and now it doesnt work again. Hmm it seems its not repeatable. yet.
Please can someone post links to the relevant files needed to do the above. Actually I see the G4 link above so just phonepad if poss.
Thanks
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
How did you get it to work?
Cheers the G4 does the trick
thank you for the solution!! worked first time for me, installed the tweak then phone pad english and soft resetted. so glad to have phonepad back!
OK I got the G4 Sip program installed but the phonepad never works - just pops up the standard keyboard. I have a Orange M700 - any suggestions? Thanks
Uninstall both then install sip change, reinstall phone pad select phone pad as default and it should work...
Or if all else fails purchase SK tools as this always works and has many useful extra features.
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Yet another hapless convert to smartphone
tattoo_gaz said:
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Click to expand...
Click to collapse
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Awesome, this has been plaguing me for a long time, whatever i did i could not get any keyboard except the standard ones to stick and be useable, fine with a stylus, no good for one handed operation.
Now it all works and like the rest its a case of remove anything resembling SIP management and alternate SIPs and then install G4 Tweak and then Phone Pad, select PhonePad in the G4 interface and soft reset. Bingo a working phone pad.
Phone Pad
inanimateman said:
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Click to expand...
Click to collapse
I was in a similar position to you. I managed to get mine working eventually - I found that I didn't need Sip Change. I just installed SIP Tweak, then Phone Pad. I think perhaps the key thing is to soft reset immediately after selecting Phone Pad on Tweak. Once I'd done that it finally worked, and has continued to work even after when I've shut down normally.

Desactivating TF3D

Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Start>Settings>Today>Elements>untick TF3D......it´s just another today plugin. BTW TF3D runs fine with MS2.1 on my Diamond.
Nevertheless I have TF3D now disabled - to much of a memory hog. Back to PocketBreeze, BatteryStatus and SPB PhoneSuite together with MS2.1.
djspank said:
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Click to expand...
Click to collapse
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
webmice said:
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
Click to expand...
Click to collapse
Oki, It seems a little bit hardcore but why not, I will try this.
Thanks for your help
Hi, i just got my diamond yesterday it hanged because i am a newbie and tried several things i do not understand and it suddenly hanged.
I tried the reset it by the small red button, and everthing seems to work fine. Howerever i am now not able to see the Big Digital Clock on the Home page. Pls.. advise on what to do.
I am thinking of doing a hard reset, but i do not know how... What are the risks on doing this and how to do it correctly.
Thank you...
What do you see instead? Nothing? Small clock? Bit more info would be useful....

Huge problem

I just upgraded my ROM to that Duttys WM6 version and (finally) finished installing all the programs that I lost in the process (like S2U2; KaiserTweak; etc...). I began to set up my launcher with the programs that I had on it before, one of which was KaiserTweak. However, when selecting KaiserTweak, my finger slipped and I accidentally selected the XML file. Inatantly, my tilt soft-reset itself, and now whenever I try to even click on the launcher icon on HTC home, my tilt will soft reset. What can I do?
Much thanks in advance!!
reset your phone

APP SPB Mobile Shell V3.0

Hi,
I have a problem. I'm currently using a HTC Touch Pro and installed recentle the Mobile Shell V3.0. But I can't get back to my original (tf3d) today screen. When i try to get back, the only thing i see is the HTC Wallpaper and a shortcut to get back to spb home. How can i get to my original today screen without uninstalling the mobile shell??
SPB Mobile Schell 3
Me too!
I have installed SPB MS and when i have unistalled it the TF3D wasnt work anymore.
Someone have a solution please?
Tanks
PS: i have a HTC Touch HD with original rom ITA.
The only way I found to get both to work concurrently was to disable Mobile Shell from loading on startup. Let TF3D load, then manually start Mobile Shell after a soft reset.
callmemoe said:
The only way I found to get both to work concurrently was to disable Mobile Shell from loading on startup. Let TF3D load, then manually start Mobile Shell after a soft reset.
Click to expand...
Click to collapse
Verified here too.. Then again, I don't think I'll be using TF3D anymore.
callmemoe said:
The only way I found to get both to work concurrently was to disable Mobile Shell from loading on startup. Let TF3D load, then manually start Mobile Shell after a soft reset.
Click to expand...
Click to collapse
how can u change the programs at startup?
Thnx people, fixed it, now i can use them both!!
l3it3r said:
Verified here too.. Then again, I don't think I'll be using TF3D anymore.
Click to expand...
Click to collapse
How disable Mobile Shell from loading on startup?
farhan727 said:
how can u change the programs at startup?
Thnx people, fixed it, now i can use them both!!
Click to expand...
Click to collapse
How disable Mobile Shell from loading on startup?
ovidio said:
How disable Mobile Shell from loading on startup?
Click to expand...
Click to collapse
Delete the file SpbMobileShell.lnk in \Windows\Startup
pdafuzzi said:
Delete the file SpbMobileShell.lnk in \Windows\Startup
Click to expand...
Click to collapse
Already done! .. but SPB MS continue to start!
Any suggestion?
Hit Launcher on main menu. Find the SPB Mobile shell icon and click on it. It will direct you to a new page. Now click on the right lower aspect of the screen (right soft key). Click on "exit shell". Your touch flo should load up and there you can select touch flo or spb with ease. You do have to redo the whole procedure everytime you soft reset
ERWIN CENIZA said:
Hit Launcher on main menu. Find the SPB Mobile shell icon and click on it. It will direct you to a new page. Now click on the right lower aspect of the screen (right soft key). Click on "exit shell". Your touch flo should load up and there you can select touch flo or spb with ease. You do have to redo the whole procedure everytime you soft reset
Click to expand...
Click to collapse
All is done but TF3D dont start.
I have the left soft key "Message" and the right soft key "Spb Home" on bottom of the screen.
On top of the screen i have "Touch to start TouchFLO 3d" and if i touch the screen it say: "TouchFlo starting" but not start!
if i push the left soft key "Message" it seems "impossible open the file: MSPOUTLOOK calendar ... etc.."
I think a must do a soft reset also if i dont wont.
thanks in advance
In my opinion I would say just remove MS3... To be honest I was not impressed. at first I was like WoW how flashy..... It even built in a way to Design your own page.... but after playing with it for a few hours I took it off. It was good enough for what it was but just not there yet for me. I LOVED MS2. As long as it had Greatbal's TF2D Theme on it. The best part about it was how snappy it was. it has a great response time... But I didnt like the integration or customization of it. It does not allow to you change the items in the carousel (AKA Remove). I didnt like how you only had the "Personal" home screen that you could slide left and right... I think they should have made it like MS2 more where you could just slide left and right to get anywhere. The bottom bar is a waste of space... and the top bar should not ev en bee there. MS2 if I remember correctly covered the start menu and this one should as well... I dont like that it doesn't integrate with PI8 (but then again TF3D does not either) But my biggest concern is that it does not even allow you to put other SPB products into the carousel.
For me I think I will wait a while and let some of the GREAT designers in here fix MS3 and make it better. I think that SPB did a pretty good job of giving users what the want... but they are not quite there yet. I am going to stick with just TF3D until I see some more improvements on this product.
Have a Great day,
SoBBie
Screen Rotation Delay
MS 3 is a nice interface & I do like the carousels. The deal-breaker for me is the 5 second delay when I slide out/in my keyboard. WAY TOO LONG.
SPB Mobile Shell 3 is great but yes the delay when switching from portrait to landscape is horible! Even worse, if you are in landscape in Opera then hit the home button, SPB 3 gets stuck in landscape till you either reset or launch Opera again then switch to portrait

WM 6.5 | Part of taskbar missing, HELP!

Hi,
Since a while part of my taskbar is missing. Well, most of the time it is: when I close a program is is totally visible for a very shot while. (See screenshots)
I've allready installed other taskbarthemes using sdkcert, but no improvement..
Anybody got a solution??
Gr,
EdjuH82
I have seen several discussions about making the OK/Close button larger so that you can use your finger rather than the stylus. There may be some ROMS that include this feature and perhaps yours is one of them that is malfunctioning.
I would hard reset if you like your ROM. If not, flash a new one and the problem will go away.
Doug M.
i wouldn't go so far to hard reset anything right away- i would install an sdkcerts and then soft reset and then install a taskbar skin cab found on these forums and see if that fixes things
GustavTheLion's,
I allready installed an other taskbarskin, this didn't help..
The problem accured after I installed a game, which wouldn't work (so I removed it right away. Today I turned the function off that says that puts the time in your taskbar when you run a program and now the problem only accures on the 'home-screen'.
Dwmackay,
An hard reset is an option, but it's the very last one. Maybe there are other sollutions?
Thnx for your replys!
Well guys, I hard-resetted the device and the problem is solved.
But I'm still curious what the problem was, so if anyone can explain it to me.. be my guest

Categories

Resources