Database Develop

WM05 AKU2 to BA - test

I need someone to test this ROM, because I dont have a BA.
OS 5.1.195 (Build 14847.2.0.0)
STOP !!! ROM IS NOT WORKING
"ftp://xda:[email protected]/Uploads/BLueAngel/WM5_BA_-_AKU2 TEST.rar"
It is possible that you have to reflash the old rom!

Is this based on the Himalaya rom?

How likely is it to turn my BA into a paperweight? LOL
I am donloading it now mate.. Will post any results in about 2 hours
Gruß aus Malta!
Juggs

I used the the newest QTEK Wizard Rom.
There would not be any difference between Him or Wiz OS. Same build same files.

bepe said:
I used the the newest QTEK Wizard Rom.
There would not be any difference between Him or Wiz OS. Same build same files.
Click to expand...
Click to collapse
?? no omap or xscale code optimalisation ?? files can not be the same :|

I ported the German Wizard rom successfully to my Himalaya and I did the same with the WWE version at this rom.
But there could be differences. In this case, the rom would not work.

First Impressions..
OK.. bearing in mind that i only installed the Ivan Rom about 3 hours ago.. My MDAIII is getting a beating tonight.. However...
Ok.. Standard stuff.. Bootloader mode.. Set operater..
The update was relatively quick.. only took about 8 minutes,
Formatted the hive and storage OK..
And it hang on the Windows Mobile Screen!
and it keeps on hanging on the windows Mobile Screen.. :?
No New device Setup.. No shimmer of life.. No backlight.. Just the on/Off button Works
Sorry mate.. Back to the drawing Board!

I have not changed the drivers, only the OS.
I compared a Univesal and Wizard rom and the OS is exactly the same.

That may well be bepe.. But it doesnt install past teh windows Mobie screen...
Something is wrong mate.. normally it should give you that screen you get when the device need to be setup the fist time.. and it doesnt.. It just hangs..
Sorry..

Ok thanks and I'm sorry.

Ahh well! Thanks for your attempt Bepe. It seems he got to the same stage as Mamaich & Tuatara.

bepe said:
I need someone to test this ROM, because I dont have a BA.
OS 5.1.195 (Build 14847.2.0.0)
"ftp://xda:[email protected]/Uploads/BLueAngel/WM5_BA_-_AKU2 TEST.rar"
It is possible that you have to reflash the old rom!
Click to expand...
Click to collapse
***NOTE: To all wanting to test this, the ROM will not finish the BOOT sequence. This is the same or similar problem both mamaich and I have had with undertaking the Himalaya AKU2 Port to date. ***
The device will initialize, gets to the 'boot splash' screen, runs that ...
The "coldinit.exe" is started, since we hear the 'ding' happen ...
At this point the device locks - an animated "dialog" appears to want to be displayed.
The boot process proceeds no further. Presumably crashed.
Additionally, the LEDs are dead/disabled so I can not tell if the phone (RIL, BT, etc.) is still available/operating. Power button or screen taps do NOT relight the backlight, or enable the screen. Presumably locked up.
Ok ... excellent work so far, however the same problem(s) seems to be arising which both mamaich and I have run into when using the Himalaya AKU2 port.
My guess is that this is probably due to the same missing DLL interface calls being available in coredll.dll. There are now 5 additional entry points in the XIP portion of this DLL, and this could be causing the 'hang'.
It looks VERY promising though ... I'm definitaly going to be taking a VERY close look at this ROM as well. The boot sequence is quite dramatically different, and may lead to some possibilities in merging ROMs to avoid the requirements of changing XIP section modules.
P.S> TuMa v1.4 will be out shortly ... it's now combining elements from the Wizard, Himalaya 1.7x & 2.0, Jasjar, Atom, Acer, and the original v3.1 BA from mamaich now. Trying to merge the 'best' of the available elements for a well performing and stable device.

Not a problem.. Just let me know when you want another one tested!
Gruß Aus Malta..

OT: has anyone tried porting Universal rom? is it possible?

@Saintraziel:
Would be the same result.
And a lot more work to do because of the VGA resources.

aku2
Would this give AKU2 functionality for blueangel? (PH20B)
If so I would be happy to test any builds, I am dying to get my hands on a working WM5 with push email on BA.
Cheers...

HTC Hermes's WM 6 on Breeze

As I understand "Also the Breeze Hardware shares most of the Parts with the Hermes" is it possible to convert it's WM 6 for Breeze?
(sorry for my bad English)

Probably it is, need to look into it. at first we need to crack spl to avoid nbh check

hi,
maybe hard spl v7 works...
i have experimented today... but i need my phone, because of that i finaly didn't click on the "flash now" button

Hermes is a PocketPC and Breeze is a Smartphone...
Both WM5 and WM6 have separate OS editions for PocketPC and Smartphone. If I were you, I wouldn't try to force "WM6 Professional" (Pocket PC) for Hermes on a Breeze (Smartphone - "WM6 Standard").

So, you need to decompress the xip segment and get a memory map of breeze. if memory addresses are the same as hermes, you need to replace a coredll.dll in second xip segment and you need to build imgfs using wm6 os from excalibur/vox and breeze wm5 drivers and applications. to load this into the phone, you need to avoid nbh check

how can we decompress the xip segment ???
what is exactly the coredll.dll ???

HI,
today i have played a little bit with bootloader...
task 32 says FF ... so its definitly not supercided... but i don't really know why a few other persons here can flash a dopod rom.. maybe they are all the same cid ??
also i'm searching for a usb sniffer ... have found a few in the web but all costs money and noone had give me understandable commands while using the romupdate tool from the actuell htc rom...

ok found some other interresting info..
the RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP ROm has a QTEK_Z12 CID ....
but we all can update it to breeze device...
quite interesseting is also that:
Cmd>info 2
HTCSQTEK_Z12Û.oÂHTCE
... as we can see i my HTC Device has a QTEK_Z12 CID ... maybe someone can check what CIDS und the Breeze's out there...

Hi, could you explain how have the CID of the phone. Because i tried with info2 but it didn't work. Thanks. ++

----------------------------
just go in bootloader:
turn off device and restart it with hold cam button...
attach usb cabel the serial line on the 3color screen should change to usb...
also you have to deactivate the activesync usb connection...
then start the mtty app choose the usb connection...
then youll see the cmd> line... after this enter info 2 ... and you should become a output like mine...
------------------------
what ipl/spl version's are shown on the 3 color screen ??

i read that HTC announced S730 (wings)
it is like s710 but with MTeoR's hardware and WM6
I hope that it is possible use s730 ROM to take WM6 for MTeoR
So we need wait for s730 i think
I hope that i can see WM6 on my MTeoR :-[

concerning to his thread: http://forum.xda-developers.com/showpost.php?p=1257924&postcount=10
i say it a second time now...
we need the excalibur wm6 rom
why...
simply ... the excalibur has likley the same hardware as breeze !!!
all other devices are based on the hardware like wizard... (200mhz cpu etc.)
I'm just working on all the needs...
cookin with wm5 works!! i had cooked a German only version from the actuell rom! with a few tools on it...
also cooked an costumized bootscreen:
also there has to be somewhere in rom a "Shutdown" Screen.. i flashed the 2 Bootscreens and when shutting down the phone theres the old htc screen...

excalibur (s620) based on Tornado. So it have OMAP chipset, other radio w/o 3G etc.
at this time there is no MTeoR's based smartphones on the market as I know. Announcement only (Wings/Erato/"excalibur replace")

... damn ... what t.. f...
i searched a few days a ago and i had a website where the info was that excalibur is like the mteor...
....
ok so far i can see the next mteor hardware like phone should be the s730 (Wings)....
sorry that was my fault...
...
ok maybe i tought that excalibur was the right because this is the only one where i can find a wm6 rom for download... on all others there are no shipped roms available??
hmm

Hi,
ok just played a little bit with the excalibur rom...
the mainproblem is that i cant extract the files out of the nbh file...
because of that i can't modifiy a hermes rom...
i will look forward and hope to find an solution for it...

ok...
extraced excalibur rom...
cooked a bit...
but no working rom yet!!
also have flashed a wm6 hermes rom with a few files modified to breeze...
device didn't boot on bootscreens...
when flashing an unmodified excalibur rom, breeze directly goes to bootloader ....
next thing i want to try is to use the original 1,34.251.1 Rom ...

wow... I hope you manage to get a working WM6 rom for the MteoR...

Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!

futureshock said:
Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!
Click to expand...
Click to collapse
No, it`s not the way. Just contact me via ICQ and we`ll work. but now no time for that

HI, first sorry ofr my englis, i am from argentina, and i have a t-mobile SDA and i need know if with programs i can make a wm6 rom or if i can custimize the wm5 rom por my tornado. thank

HTC MTeoR WM 6.1 A4 ENG (Beta 1 - B1)

Hello all
Wm6.1 alpha 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many bugs (high instability)
WM6.1 alpha 2 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Usable)
Accesibility-working
Comm manager-working
T9-working
Power-NOT WORKING (you have to regedit)
WM6.1 alpha 3 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Very Usable)
Accesibility-working
Comm manager-working (without bluetooth) - fix in progress (A4)
Bluetooth working - separate menu
ad2p fixed - proper version
T9-working
Power-working
Suspend -working
XIP - Rebuilded
Caller ID -working
HSPDA-working
GPRS-working
GPS-working (external device)
MMS - working
2 beam in control pannel !!!! - fix in progress (A4)
Please test and tell me if is anything wrong and if you find fixes
WM6.1 Beta 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes
Accesibility-working
Comm manager-working (COLOR with BLUETOOTH)
Bluetooth working - separate menu
ad2p fixed - proper version
About - FIXED
T9 - working
Power - FIXED
Suspend - working
XIP - Rebuilded
Caller ID - working
HSPDA - working
GPRS - working
GPS - working (external device)
MMS - working
2 beam - FIXED
Windows Live - FIXED
you must update Windows Live to latest version
http://rapidshare.com/files/106073863/Windows_Live_10.6.34.2500.cab.html
ROM Links
http://rapidshare.com/files/105874292/MTeoR_-_WM6.1_-_A3.rar.html
http://rapidshare.com/files/106079473/MTeoR_-_WM6.1_-_B1_-_ok.rar.html
Please test and tell me if is anything wrong and if you find fixes
Also released the A4 kitchen
Many thanks to
Bepe - Tools
Mamaich - Tools
Dr Martin Gonzo - support
Garmin - support
futureshock - Test and bugreport

Hi, from where comes the Wm6.1 Roms?!
when you give it me i will try to made other languages too of it

jerpelea said:
Hello all
This is the alpha version of wm6.1
Please test and tell me if is anything wrong and if you find fixes
http://rapidshare.de/files/39013516/MTeoR_-_Splash_Screen.rar.html
http://rapidshare.com/files/98157272/WM6.1_Segoe.cab
http://rapidshare.com/files/104652554/MTeoR_-_WM6.1_-_A1_-_ok.rar.html
tomorow i will release the rom kitchen
and vanilla wm6 & wm6.1 roms
Many thanks to
Bepe
Mamaich
Dr Martin Gonzo
Garmin
for their tools and suport
Click to expand...
Click to collapse
how cook chines ROM?

good job! thanks very much!

Wow Cooooool man good job thanks

hello,jerpelea !
I find this rom in "seting", "Power Management","Accessibility" is bad."regional settings" locale is russian,and lose "systerminfo"
my english is poor,wish you can understand.

Hello lyf1998
fixed accesibility
working on power settings
i know that locale is in rus (is normal)
Where did you find sistem information ?(it is not included in this rom)
I will not cook chinese rom
please learn english, read forum and learn gow to cook or add locales.
I will release the Kitchen so that you could cook yorself an rom
Thanks

jerpelea said:
I will release the Kitchen so that you could cook yorself an rom......
Click to expand...
Click to collapse
Thanks.
呵呵，谢谢。

released
till monday i will release an A3 version

jerpelea is KING!
Hey jerpelea. Thanks so much for getting this out, I loaded it up as soon as I got home Friday night. Observations so far:-
Pros:-
-Very fast loading, much faster than latest WM6.0 out for Mteor
-Very fast running, including loading apps.
-Visually, complete makeover. Much happier with this Today screen than any plugin I've seen.
-All software attempted to far works fine- Route66, Google Maps, Skype (as well as it does on the mteor anyway!).
Issues:-
-msn messenger not installed, however Today screen expects that it is there. When selecting to sign in from Today screen, it comes up with a connectivity issue immediately, however no connectivity issue exists. I can install WLM seperately, but would be ideal to have the sign in from the Today screen as intended. Also when I've installed the latest WLM, there is a strange issue where I cannot do backspace- the 'back' key does not delete text and move the cursor backwards. Makes MSN virtually unuseable for me.
-Phone intermittently does not resume from standby- is frozen. It is still flashing to say that it's on and connected, however no buttons will revive it- the only way to revive is to remove battery and reboot. When phone restarts new messages and emails come in- leads me to believe phone was frozen.
-Phone intermittently wakes up for no reason- have had the phone sitting next to me for a night, and it lights up brightly at random intervals.
I am blown away with this release- it's made my Dopod 595 my favourite phone to carry again, over my Hermes and Asus Halley. A few issues to be resolved obviously, but it's exciting that we're getting such recent builds of WM6 for our Mteor's.
Keep up the great work, holding my breath for the A3 release!!!

does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks

Dopod 595 & WM6.1 A2
alexnvidia said:
does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks
Click to expand...
Click to collapse
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...

MMS
jerpelea can u add MMS program to your A3 release???

stuartmclean said:
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...
Click to expand...
Click to collapse
you sound pretty much like a guru here.. it will be very helpful if you can provide the links to the documentation of the CID, SSPL, ROM, or anything relevant here. i know i can do a search, but my 595 is out of warranty and it wouldnt want to risk killing the phone with the wrong process or procedure.. unlike the startrek thread, the superCID and unlocking process are well pointed(links) and explained in the ROM update packages. i find that Breeze's threads are a bit fragmented here..
so if it's not too much of trouble, maybe you can start a new thread explaining the unlocking, CID, SSPL, and Radio upgrades in detail. im sure the admin will make this useful thread sticky for nobs (like me). cheers.

have you looked into wiki?! there are many infos...
CID Unlocking isnt researched sofar that you can use it without starting the sspl from a running device... so that means theres no HARD SSPL yet...
and i think there would never be..
i have tested to flash devs sspl but it didn't worked...
i'm also on the side that the mteor is a smartphone thats not really widly in use... so theres no big community behind they develope!
DEv has done so much with his sspl...
and with wm6 and wm6.1 yet i think thats much more i have ever imaginaryed!

thank you again! but i still do not run rom Kitchen.

is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?

lyf1998 said:
thank you again! but i still do not run rom Kitchen.
Click to expand...
Click to collapse
cant help
i have
.net 2.0
.net 3.5
visual c redistributable
windows XP sp2
Does not work on vista
BR

Hmm....
was what I got trying to upgrade...

techdev said:
is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?
Click to expand...
Click to collapse
Yes but NO i will not include it
You have the kitchen you can include it if you like
This is a vanilla version
I will try to clean it of bugs
Everybody who wants an localisation or an software will have to add it
BR

Released: German WM 6.1

German WM6.1
-------------------
- based on Ather's Windows Mobile 6.1 Dark Edition,
WM6.1 CE OS 5.2.19213 (Build 19213.1.0.4 ather90)
- Program : 61.25MB
- Storage : 30.53MB (after running HimaDOC tool)
- RAMDisk : 31.96MB
translated and
- removed : Welcome-Center
- replaced : CommManager, Welcome-Screen
- added : Network-Wizard
No other changes made to Ather's clean ROM.
- download : http://rapidshare.com/files/134517514/German_WM6.1.zip.html
For german keyboard install included "German Input for WM6 by ZakMcRofl.cab".
!!! Many thanks to Ather for his ROM and his kitchen !!!
German WM6.1 v2
---------------------
- see Post #4
- download : http://rapidshare.com/files/137081161/German_WM6.1_v2.zip.html

Yes,yes,yes.
I got it - I got it!! In a few minutes, I´ll flash it, and then I give it the hole program of my usual tests. It´s good to have a second Hima for such a case.
I thought of leaning to cook myself but athers and swampys cooking lessons stuck, so this is the right thing to fill my long summernights.
I try to give some infos how things are going asap.

Infos after first tests
Great work!
\Speicherkarte is still \Storage Card so some changes have to be made to install some progis like: sclcp++ and ftouch. Adding contacts is working in This ROM!!
After soft-reset you have to change to german keyboard again everytime.
Screen Rotate-fix and serialusbfn.dll-fix is missing and has to be added by yourself via cab files.
Sorry i found no working Hima-version of large titelbar/start menu as it is working in my old German ROM by teijalk. If someone has got one Please send me a link I miss it.
I installed jbed and Opera Mini german and made it Default Browser and it works like hell -- super fast and stable.
Don´t know why but I can´t install a running version of Sprite backup, maybe my fault.
Still don´t know what "Verwaltete Programme" are.
The comm Manager/Verbindungsmanager in teijalk´s ROM is in German and looks nicer.
After Screen Rotade Fix you can´t align the touchscreen without deinstalling the fix, but no prob.
No way to get SDK working. Well I don´t it - so it´s nod bad.
+++++++++++++Thanks for this nice ROM++++++++++++++
Too bad that ather is stuck in his cooking lesson. This ROM is worth to be improved and recooked.
Sorry swampy395, after ten years of en-lesson in school my skills in your nice language is still to bad to understand your readme files 100%. But to cook a working ROM, I think, you have to know it for sure what your are doing.
I keep trying to go your way to recook, till I know what´s your way to use your language.
2 b continued asap.

@muckelmaus
Many thanks for your testing,
with your help I released German WM6.1 v2
- "Storage Card" is now "Speicherkarte"
- Screen Rotate-fix and serialusbfn.dll-fix now integrated
- the comm Manager/Verbindungsmanager now taken from teijalk´s ROM
Downloadlink see first post.

Manny THANX
Coooool!
Is there a still little more room free in that ROM?
Aps like batti 2.1-de Softkey Applet WM5torage and LargeStartMenue would be wonderful.

Yery nice, i really appreciate Ather's and your work.
I just flashed my dads Himalaya with your ROM, so I'll give you a feedback as soon as he comes back from his trip

Works Very Nice ;-)
But i miss the X Button or HTC Taskmanager 2.1

HTC Home
Nice work - I´ve been waiting for it such a long time!
But - for some reason my favourite "Helmis HTC Home" ain´t working on this ROM.
Is there any "HTC Home" known to work on it?

im glad i could be helpful
nice work..and keep it up

Dr.Chaos said:
Nice work - I´ve been waiting for it such a long time!
But - for some reason my favourite "Helmis HTC Home" ain´t working on this ROM.
Is there any "HTC Home" known to work on it?
Click to expand...
Click to collapse
HTCHome.v2_1_1005722_s0-alldevice_ger.cab is working fine, and
emunutz HTC Home customizer v1.o (HHCv10Final.CAB) does a great job.
Look here
http://forum.xda-developers.com/showthread.php?t=364550&highlight=German+Home&page=2
post #15:
thanX teijak

1 Bug, 1 minor complaint
Hello,
thanks for the ROM, fast & stable
Bug:
I noticed the HTC network wizard does not work automatically, you have to start it by yourself and choose your network.
Complaint:
Please don't change the "natural" entries in the program menu. This causes all sorts of problems, e.g. with the Contact and Calendar buttons.
Greetings,
Andreas

stupiddog said:
Bug:
I noticed the HTC network wizard does not work automatically, you have to start it by yourself and choose your network.
Click to expand...
Click to collapse
Well - that´s what it´s for!
Enter your network operator (you should be aware which you use) and the wizard does the setting for GPRS a.s.o.

Dr.Chaos said:
Well - that´s what it´s for!
Enter your network operator (you should be aware which you use) and the wizard does the setting for GPRS a.s.o.
Click to expand...
Click to collapse
Nope. It's supposed to recognize your SIM card and choose the correct network provider automatically, see other roms.

@ stupiddog:
Try
[HKEY_CURRENT_USER\Software\HTC\NetworkWizard]
"EnableAUTODetect"=dword:00000001
"EnableAutoNotify"=dword:00000001
"EnableStartUP"=dword:00000001
.

Rom Update not successfull ...
Hi ... I'm new in installing ROMs on the XDA (especially on my T-Mobile MDA-II), so please excuse my noobidity.
I've tried to install this new German-Rom and use the included HimaUpgradeUt_noID.exe to update the ROM of my MDA - but with no success. (Message after a while: "There has been a problem while updating your Pocket PC")
When I try to install the latest released T-Mobile MDA ROM, everything works fine.
I also tried to install the new nk.nbf with the HimaUpgradeUt.exe which is included in the working T-Mobile Package, but as expected I get a Country-Version Conflict Message.
Any Idea how I can install the new ROM on my MDA or what I have done wrong?
Thanks and greets,
a MDA-Rookie.
[Edit:] After I find out what was meant with "Boot-Loader" and how to get there, I was able to install the ROM ... and ... it's realy great.
Thanks for the great work and all the helpfull Members her on this great Board !!!

you were getting this error on WM6 because since WM2003 you cannot directly update the ROM, you have to Enter Bootloader...but its good that you helped your self
Ather

thanks for the great work. only the htc home can install on it, the weatherpanel have no funktion

HTC Home V2 with weatherpanel works fine
hyson said:
thanks for the great work. only the htc home can install on it, the weatherpanel have no funktion
Click to expand...
Click to collapse
Look at post number 15 here:
http://forum.xda-developers.com/showthread.php?t=364550&highlight=German+Home&page=2
and download Apps2,
as I mentioned earlyer. It should work, for me it´s fine!!

very gread job!!
running an my 2 XDA2,witout probleme !!
but i miss the HTC task,ehmm i mean the icons with com manager,batterie,screen setting ect.!??
enyone can help!????

Red LED
Thanks for the ROM. It works perfect on my MDAII.
One Question: Is it possible to have the right LED red when a new phone call or message arrives?
Best regards
ullihaush

WM 6.5 Beta Testing Expired - Urgent Assistance Required !!

Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !

Durandt said:
Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !
Click to expand...
Click to collapse
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish

Durandt said:
Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !
Click to expand...
Click to collapse
I have same problem... ActiveSync doesn't work anymore so I can't get contacts and everything from phone... tpoday I will flash it with original HTC rom which work as must...
erwinpiero said:
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish
Click to expand...
Click to collapse
Or make hard reset and then flash it with other rom... For me work...

erwinpiero said:
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish
Click to expand...
Click to collapse
My Friend...You are a Star ! Thank You very much ! It worked like a bomb !

Glad to hear it Sir

Which ROMs are affected by this specifically? Anyone knows that?

Balrog82 said:
Which ROMs are affected by this specifically? Anyone knows that?
Click to expand...
Click to collapse
I don't remember name of ROM but I know when booting show some scary head and label with WM6.5. It have Titanium "home" plugin...

_Dejan_ said:
I don't remember name of ROM but I know when booting show some scary head and label with WM6.5. It have Titanium "home" plugin...
Click to expand...
Click to collapse
As i remember there are some ROMs with scary splashscreen, Josh and Anryll ROMs, but which version?

erwinpiero said:
As i remember there are some ROMs with scary splashscreen, Josh and Anryll ROMs, but which version?
Click to expand...
Click to collapse
Im 70% that has been ROM builded by anryl's from THIS thread.
Which build? I don't remember...
I know that have:
-3 columns start meni
-without calculator
-Titanium "home plugin"
-iContacts

yeah it happened to me too I was using Anryl's 21500 rev5 wm6.5 rom
rant start
then I attempted to load TCPV6FULL wm 6.5 rom and it installed but will not even boot into the OS...such a pice of crap and this is the second crappy ROM I tried from that guy after 3 wm devices and no REAL improvements from M$...I think I'm going to go get a Palm Pre or Android Phone
rant over

ljinsane said:
yeah it happened to me too I was using Anryl's 21500 rev5 wm6.5 rom
rant start
then I attempted to load TCPV6FULL wm 6.5 rom and it installed but will not even boot into the OS...such a pice of crap and this is the second crappy ROM I tried from that guy after 3 wm devices and no REAL improvements from M$...I think I'm going to go get a Palm Pre or Android Phone
rant over
Click to expand...
Click to collapse
Dude, seriously? I've heard nothing but complaints about Android. Only issue with TPCV6 I know of is quickGPS. Other than that it is fast, responsive, and loaded with some pretty good apps and customizations. V5.1 has no issues. Maybe you got a bad download, or forgot to flash a stock rom first, but his work is pretty good.

I'm using Anryl's Build 21501 6.5 with no problems. no time bomb as of yet, and if it does, oh well. I save all contacts to my SIM & don't save messages so it's no big deal. My room mate has a G1 and what does it do? It sits in his desk draw as he uses his new LG Incite WM cell (His Kaiser needs a new screen again).
Note to self, don't put your Kaiser in the same pocket as your wallet with metal buttons on it unless you want a cracked screen lol...

I have the same problem with o2 xda trion... please help me.

worried
i have a AthineOS WWE 6.5 rom. Is 6.5 on beta test generally? Will all 6.5 roms expire after some time? would be helpful if someone could clarify as i also had no idea about this.

You have to use an NTBC ROM to be free of this kind of probs.
NTBC unofficially stands for No Time Bomb Certified.
The new ervius style kitchen checks it auto. on build ROM, but old style kitchen maybe doesn't. I would recommend asking your preferred cooker to upgrade to ervius new style kitchen, in order to produce free NTBC ROMs
Passing manually in bootloader mode then plug in PC you don't need ActiveSync you can flash a new ROM directly. Hoper that helps,
brds
nar

help to upgrade to wm6.5
drkfngthdragnlrd said:
I'm using Anryl's Build 21501 6.5 with no problems. no time bomb as of yet, and if it does, oh well. I save all contacts to my SIM & don't save messages so it's no big deal. My room mate has a G1 and what does it do? It sits in his desk draw as he uses his new LG Incite WM cell (His Kaiser needs a new screen again).
Note to self, don't put your Kaiser in the same pocket as your wallet with metal buttons on it unless you want a cracked screen lol...
Click to expand...
Click to collapse
I just can't upgrade my htc8925 from wm6.1 to 6.5..
i tried a lot of stuff and i'm stuck and i'm asking for help (i have a paypal account if that helps.. )
if I reset my mobile holding the camera button i see the 3 colors properly with this info:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
not sure if that is correct or not.
my model is kais100 htc8925
image version: dcsv1.3-wm6.1
any step by step will be very apreciated !

nevaska said:
I just can't upgrade my htc8925 from wm6.1 to 6.5..
i tried a lot of stuff and i'm stuck and i'm asking for help (i have a paypal account if that helps.. )
if I reset my mobile holding the camera button i see the 3 colors properly with this info:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
not sure if that is correct or not.
my model is kais100 htc8925
image version: dcsv1.3-wm6.1
any step by step will be very apreciated !
Click to expand...
Click to collapse
Start here:
http://forum.xda-developers.com/showthread.php?t=433835