Related
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Just up, I really need help, I'm completely desperate... :|
You can put your device in bootloader mode?
eagleamon said:
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Click to expand...
Click to collapse
What symptoms do you have exactly? No led, no backlight, no text on the screen, no charging? What happens if you try to enter the bootloader?
Thanks for your interest.
In fact, after the flashing process, the phone switch off, and now, I cannot switch it on, if I put the usb cable, the pc does not detect anything, but the led ...
I let the beginnning but finally it starts !!!!
Yesterday, I disconnected the battery so as the secure one discharge also, and a few minutes ago, I put it on the 220V without hope and the led lighted ! and no it starts, but in German .. (I do not really understand this..)
So do you think that I should retry the french wizard rom ? Or this try cannot work ?
If this is the case, does someone know where I could find the English Charmer Rom (I do not find the T-mobile download page anymore) or better a french one
Thanks a lot in all case !!!
You flashed a charmer with a wizard ROM and it's working???
Well, i think that for you it's better to flash your device with a charmer ROM. On the ftp there is only a english ROM, not french.
No in fact it works again, but it's still in german ...
Could you please give me the link of the french rom ? I cannot find it...
Just a few more info...
So the phone works, in german, but there's someting really strange.. if I try to put it in bootlaoder mode, it's impossible, it switch off but do not swith on after, and not at all in fact, I have to get off the battery or put it on the charger so that it starts again...
And with the charger, after the boot, I can restart in bootloader mode, but at the second I unplug the charger, the phone switch off and it's not possible to restart witout the charger.....
Do you have an idea of what's happening ?? And how I could flash with an english rom ?? (doesn't work with the cradle USB cable..)
Thanks a lot !!
I think that the best thing to do is to flash the ROM with the WWE or German, as you like, you will find the ROMs on the Charmer section of the FTP.
Put your device in bootloader mode with the usb connected, then upgrade the ROM.
Indeed that would be the best solution but with the usb cable, it doesn't stay in bootloader mode, it switch off immediately ...
Do you know a reason of this behaviour ?
No one's got an idea .. ?
I'm still worry, so I do up
Just a last try
Is it possible that the bootlader has been changed and now dosen't work anymore ?
Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az
try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az
Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way
uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....
gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]
is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !
I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it
No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.
Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!
Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!
No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??
erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!
erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
thank anyway,i will try it before tomorrow,cause i will send them my device for repair.
hi to all
I not talk on this forum mach because of my English but i look on it and read allot
I have the T MOBILE G3 VIRSION of the kjam MOBILE PHONE
I try to update my rom+wm6 from this topic
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
but in stage 2.4 I found that I have big problem
last time i look on my phone it was in 37% and not running
at the morning I wakeup and found the 3 color screen on my mobile
after trying HARD RESENT without any result I tack out the buttery for more than 20min but it’s all stay the some
anyone think I can tray anything alls or I just lose my favorite mobile
?
The whole flash process using RUU should be less than 10 minutes.
Now flash with your original T-Mobile ROM(Flash in 3 color mode) and your Wizard should work again, then restart the steps in tutorial.
If flashing still stops when you trys to flash T-Mobile ROM, perform flashing with another computer.
from wher i can gut the Now flash with the original T-Mobile ROM(Flash in 3 color mode) ?
Hello,
Today my vibrator goes mad, so I decided to send my phone back (I still have the warranty).
In order to proceed, I have to put back the official SFR ROM, and luckily I found this link on the wiki : ftp://xda:[email protected]/Uploads/Trinity/SFR_S300+_ROM_French_1.23.163.2_Only_OS.rar
So I did a little backup of all my data, I take off the memory card, and I started the installation.
But at 9%, it bugs. Hopefully, the ROMUpdateUtility display a message that I have to put off and put in the USB cable, and retry the installation. Its seems that works, because the transfer was complete and the phone reboot automatically .
But when the phone reboot, it display the classical boot screen SFR Bonjour, show some numbers (M 05 - B 05 - D 1.23 - R 1.50.08.11 - G 32.83.7020.20h) and when this numbers disappear the phone freeze.
I've try to wait half an hour, but the SFR boot screen stay, and the phone didn't respond to anything (I've try to put the power cable, and the LED set on only if the phone is off). I have to put off the battery to turn off the phone.
If somebody could help me, please!
And excuse me if I made any mistake, english is not my native language.
I have the same issue......
I have the same issue, my SPVM700 just sits on the initial splash screen after I tried to re-flash it to the original Orange ROM [as I too had to return it for a warranty repair]. I used Mozzer's Orange ROM [http://forum.xda-developers.com/showthread.php?t=309959] to restore it - the procedure looked the same as with other ROMs I had successfully loaded but it was only when I tried to restore the official MNO ROM that my Trinity bricked.
I can access the bootloader screen [TRIN100 IPL-0.50, SPL-9.99CP] and can flash the device, where the progress bar always reaches 100% on the PC and the PDA and then the PDA automatically reboots, however, it does not advance past the splash screen.
I have tried the Hard-SPL fix [ http://forum.xda-developers.com/showthread.php?t=299659 ] and then re-flashed the device with other ROMs that I had tried previously [Schaps, AX3L, HTC Official WM5 P3600 ROM etc..] but still get no joy - is there something that I should have done prior to re-loading the original ROM that I have missed and is my Trinity now forever a brick?
you've presumably tried a hard reset? but it's not written above so i thought i'd just check.. (pressing two soft reset buttons and pushing the stylus in the reset hole?)
Yes I did try a hard reset even though I didn't expect much from it as I had just replaced the ROM [effectively wiping the ROM and replacing it with a different ROM] and none seemed to boot. Once the device has started booting up, the only way to switch it off is to disconnect the battery [and the only way to switch it back on is to soft reset] so I am guessing there is a hardware issue caused by returning the device to the Original MNO build as this was the ROM upgrade that trashed the device - other ROMs tested prior to this had loaded successfully.
Sorry to bring this back but since the link is in Behemot's sig, it is not resolved yet. Have you guys loaded SSPL before flashing? If you haven't, the OEM Rom won't boot with HardSPL. Try flashing another custom Rom and use this method before flashing the Shipped Rom.
Good luck.
ask ilos for original SFR rom or search for extenue SFR rom. or contact me by personal message and give me your mail i have the SFR ROM without radio ROM (you can get the radio on this forum)...
Sorry, I've forget to update this thread...
So, for me the only solution was to bring back the device to an SFR store (it is still under warranty).
I believed they would reproach me that the RADIO was not the original one or something like that, but no. They didn't make any remark and send my device back with an official SFR ROM.
The only thing is that they take more than a month instead of the traditional two weeks to fix it.
So all is ok for me.
I hope you will solve your problem
HERALD.ASerg.WM6.1.WWE i install this rom on my tmobile wing and now i cant remove it to install original tmobile wing rom i get 1 percent when its installing then it stop and i get error 260 connection problem
Try doing it through the bootloader screen with it plugged into your computer.
If that starts to reset at the 1% mark just hold down the camera button as soon as it powers back up and after going to the bootloader it should resume from the 1%.
heyy check out my video on how to get back to the orginal tmobile rom...
http://youtube.com/watch?v=oeBV9Eeji4U
hope it helps!!