How do you upgrade the radio (im using 1.10 right now) using USB?
Or is SD flashing the only way to upgrade the radio version?
Upgrade to USB......
just like ROM
Thanks, i wasn't sure if i could use the same tool to upgrade the radio as i used to upgrade to WM 6.1.
But it worked fine, thanks alot
Just put HimaUpgradeUt_noID.exe and radio_.nbf to one folder only(do not include the nk.nbf).
Same procedure upgrading(reflashing) the whole ROM,
Put your device to bootloader...etc...etc.
After flashing it, you have two option, hard reset or soft reset.
But still, hard reset is recommended(if you got some probs after soft reset)
HTH
Related
I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????
Have you follow all this steps here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1
Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
And what device do you have in fact? Qtek 9090? Other??
Mine is a Qtek 9090 and didn't have any trouble...
Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???
I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...
@ conosciani.m
wm6 worked well on my xda3 , problem was only after repartitioning the extrom.
I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again
please tell me, if you find the solution...
running again
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!
I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......
do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx
tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...
try this...
1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color ) screen...
---Hard Reset. Using No/Yes/Yes option.
reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.
Thx, that´s exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then i´m happy.
thx everybody for your help
so i like touch-it v2.3 for my wing... i tried flashing by way of aserg i followed all the instructions and it just wouldn't work... then i hard spl'd and tried again to no avail... i know it said "DONT TOUCH THE PHONE", but things were popping up on the phone... i managed to restore to the hard spl os, when i tried to flash to the oem rom using the ruu, phone kept restarting at 2%... i restored to the factory rom by copying the nbh to the hard spl ruu folder and renaming it to canonyang.nbh... i tried flashing several times, i even downloaded the tylerc161 wing kit and it still didn't work... is there any way to flash using an Official RUU...
it's times like this that make me really miss my 8125
systematic said:
so i like touch-it v2.3 for my wing... i tried flashing by way of aserg i followed all the instructions and it just wouldn't work... then i hard spl'd and tried again to no avail... i know it said "DONT TOUCH THE PHONE", but things were popping up on the phone... i managed to restore to the hard spl os, when i tried to flash to the oem rom using the ruu, phone kept restarting at 2%... i restored to the factory rom by copying the nbh to the hard spl ruu folder and renaming it to canonyang.nbh... i tried flashing several times, i even downloaded the tylerc161 wing kit and it still didn't work... is there any way to flash using an Official RUU...
it's times like this that make me really miss my 8125
Click to expand...
Click to collapse
you have to take an official ruu - but after hard-spl you have to delete the SPL.nbh from the official ruu_rom
could you point me to a tutorial
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
tchoklat said:
I am trying to upgrade ROMS. I have the Ollipro boot loader - ALL OK, the Radio ROM I want, ALL OK. When I try to flash a ROM ([P3600i] Karmba_a v10.1 - Diamond [fixed].rar) or (cmE_0.9_beta.rar) or (n0610e_beta_m2d.7z) I get the above error. I am flashing by SD as I do not use Windoze on my PC. Radio's flash this way fine. Would this be the problem?
tchoklat
3600i
Click to expand...
Click to collapse
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
thekidz.rocks said:
Hey, i think you have bricked your trin. Read my post also! there is a solution for your problem by making gold card. Haven't luck yet, but i still tried to get my trin working again.
Click to expand...
Click to collapse
Not sure if my 3600i is bricked as I have the Olipro 3.6 Hard SPL and I can SD-flash any Radio ROM. It is just the ROM it self that fails with the error as mentioned in the topic. Any guidance appreciated!
tchoklat
Hi all,
Most definitely it is not bricked. Been there with my tinity.
On my pda only the WM5 could be installed without the error code (i only could install it from SD, because i have vista on my computer, and even with trying to follow others advice i didn't managed to flash from my computer)
and after something like 6 hours of hard searches and many tries here is my solution:
1.installed Olios's hardspl_120 (tried both 130 and DES):
first i booted om WM5, copied SSPL-TRIN.exe and the hard-spl nbh that i've renamed it to trinimg.nbh, and run SSPL-TRIN.exe, that will get you in the famous tricoloured screen (i don't know why it only installed the hard spl this way, if i try to manually enter the boot with power+camera+the stylus inserted in the reset it didn't installed and i end up with "Upgrade fail" after 1-2% or i got i restart during the flash upgrade).
2. installed the last radio Trinity_Radio-1.50.08.11
the same way like the hard-spl from SD card.
3. installed WM6 ROM
I've taken a WM6 rom (the first that i tried was Mary v3.7) and installed from SD card.
That was it.... success.
After i've managed to put a wm6 rom i've tried wm6.5 rom and worked and a couple of firmwares.
Hope this post will help in need trinity owners, because i was last night very desperate.....and i didn't found any answers, just tried and tried and...... and hope this solution will work for you too.
good luck!
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
ccmaniac said:
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
Click to expand...
Click to collapse
You probably have the wrong SPL installed. If you flashed a ROM using Olipof's HardSPL v1 and are using a WM6.1 ROM, you need to upgrade your SPL.
Flash cmonex's latest 3.* Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
ccmaniac said:
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
Click to expand...
Click to collapse
Instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922
There are two sets BTW.
Ta
Dave
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
ccmaniac said:
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
Click to expand...
Click to collapse
If you are using a ROM based on a HTC Rom (which most cooked ones are) then 3.29. For ATT based ROMs then 3.56.
If you don't know, use 3.29, and if your not happy try 3.56
Dave
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
ccmaniac said:
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
Click to expand...
Click to collapse
Read the instructions I posted. I am not copying them out
Dave
3. insert the microSD in the kaiser, then reset kaiser. (I did soft reset???) But not start 4
4. it should say Loading / Update in progress then reboot to a screen saying SPL 1.00.OliNex.
5. it should now flash in the KAISIMG.NBH. and will reset.
6. at this point it should boot to the OS, if it doesn't, then flash an OS. (of course delete the previous KAISDIAG.NBH and KAISIMG.NBH from the sd card and remove sd unless you opt to flash the OS from sd too)
I did't do that with http://forum.xda-developers.com/showthread.php?t=420683
But I think I have made it with http://forum.xda-developers.com/showthread.php?t=396922.
Now I will flash Radio and Rom...
Thanks...
Using Dutty's Rom WM6.1 Hybrid v2 5.2.19716/5.2.19700 and works GREAT...
got the same problem, some one say i got a lot of progam runing and the os cant go well, i think i fix it setting X button to really close apps and dont go background
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
I dont' know if this is the problem of onkolog rom or just the way i flash my phone.
First i use the old rom of davideuck Davideuck_V-7, CE OS 5.2.20769 on 29,March . I then got trouble with battery drained with this rom when i used SPB 3.0.
I try to update to new 6.1 rom of onkolog on 1, May
This is what i did.
My phone was on and connected to my PC. I then run HardSPL 1.56 successfully.
The phone was on again and i run the wrapper file in the same folder with onkolog rom. It run smoothly but when it recognized my O2 network it told me to be restarted after 5 seconds and when the "htc" words appear my phone hang.
i need to do a soft reset and this time it worked.
I then tried to install flip it. It required to restart after install and this time i got hang again.
I install htc Tweak and use it soft reset, some times it worked sometimes my phone hang and i need to do soft reset.
The same problem appear when i used A-A reset software.
I then decided to go back to early version of onkolog 6.1 rom (used older version of hspl) on 1-April and still got the same problem.
I tried to reflash with uspl but still stucked with usb driver.
Can anybody tell me how to show this problem . I really like the idea of onkolog but maybe he is too busy to answer me.