HI evry body Introduced an upgrade to two of the Roman Diamond 6.5 and the operation took place successfull And loading of the end and then turn off the device for re-employment and income to the screen Written by htc touch diamond, and then nothing after that and you do enter the Boot Loader To reload the original rum, but we came to the same result is that the old Your Windows does not work and stands اThe device when a page is written Alihaaltach Diamond Is there a solution or a power of attorney must be taken note of the volume up -volume downor cancel I'm not I can install a bot Lauder and walk straight into the three Choices, a volume up-volume downor cancel
Please advise me, please, because I got to the stage of the device and Yas Thank you Advance
Related
hi there,
my kaiser and my mates one too, the start button freezes after handing up on a call....
i tried using the red button to hang up, then tried the end key,,,
the menu button start doesnt appear, it just says phone,
only way i found to go around this is to press the power key to go in to sleep mode then press it again,,, to wake it up...(this has started to be really annoying...)
it then works fully...wierd,,,i contacted my netowrk operator and they dont know whats wrong, they just suggest is might be a fault??? but i told them my mates htc tytn ii (kaiser) has the same problem, and he got it from a different shop....and 4 months later,,
mmh still waiting on t-mobile uk,. to find a solution,, aint going to hold my breath...
can any one help, or advice me that the new windows mobile 6.1 will fix this?
any one know when tht is coming out officially??????????
this is a stupid thread.
just upgrade your rom.
where do i get the new rom.....
and would it invalidate my warranty on my kaiser
start here
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
read everything there
Hi Everybody,
I've got a MDA Vario III bought back in Dec, didn't had any problems till now. But yesterday my MDA didnt started and when it did, I came up with problematic keys on its face !!!
The Keys for: Making Call, Ending the call, Windows Key and OK key on the face of the handsets, when pressed overrides the function of itself by the function of the key near to it !!!
For e.g. If you press Call button, it will automatically start calling the last number (which shouldn't be the case, it should just open the dial pad!) and on top of that it opens the Contact (which is the Key beside Call button). I've tried formatting the handset twice and I am no way pressing the two buttons at same time !
Please do help me to find where the problem lies and its solution. Its kinda urgent please. Thanks in Advance
Please Help Me Folks
Please Help me folks, what can I do with it to get it working properly ?
try SK Tools I always use autoclean and free-up RAM and that helps me settle this sort of problems. It actualy does the same as a soft reset.
this was the lazy version of the answer
Hi all!
This is a brilliant forum, and I am reading it with a lot of plessure
I have a HTC TyTN II, and my touch screen does not work.
This was not a problem until I updated to WM 6.1..
Now I cant use the TyTN because it says "Tap the screen to set up your windows based device"
Is there a workaround for this?? Or do I need to send it in for repair?
Thanks!
Stupid me!!!!
It was due to the stupid screen protector and stupid me!!!!
You're not stupid, fella.
Just "differently clever".
this is what emotions you just went through ................. and now you think you are a Homer Simpson look alike......LOL
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
[email protected]
I have a problem with my T mobile MDA Compact 3 of a goof friend.
I tryed to start updating the Version of Windows mobile, but I´m not able to start the bootloader.
Did I understand right that I just press one of these key combinations? Power-Reset-ok / Power-Reset-Cam /Power-Reset-The key above the volume regulator
If I run these combinations I get always a black screen and not the display with the word "serial".
I hope you can help me with this annoying problem!
I come from Germany, so I hope my small text is responsable
Best regards Alex
Wrong section. You have to post in Artemis. Maybe a mod will move the thread.
Hello everyone, I hope some of you may be able to help me out with a "sick" HTC Desire 12 smartphone. Hopefully this is the correct place to post this question?
I recently purchased a HTC Desire 12 which had been used briefly (still looks pristine) and came fully charged and sitting at the initial set up screen, this I paired with my exaiting phone to transfer my apps, etc. over. The pairing started fine and apps starting moving along with whatever else. However as the phone was doing this suddenly white rings appeared on the screen which I believe indicates a factory reset? It stated it was erasing all data anyhow. I let this go and it continued for a very long time then the phone switched off during this as the battery ran out due to the time it was taking.
Now when I switch it one, it is basically stuck at the HTC initial black screen with HTC text, if I try to shut it off by holding the power key in, sometimes it will shut down, but instantly restart to the same place. I have been Google'ing different things before deciding to raise the white flag and post here. The phone can go into different menus / modes, but again seems to get stuck. For example as I type this it is at => FASTBOOT mode... but again just stuck there, it will not proceed past.
It also can get to the No command screen and then holding down the power button and then pressing the up button for a second will take it to the Android Recovery options.
Top of this screen states:
Android Recovery
htc/htc_bre_dug1_00401/htc_breeze_dug1
7.1.1/N6F26Q/181016
Bottom states:
Supported API: 3
No .zip file in internal sdcard
I have tried some of these such as Wipe cache and also Wipe data/factory reset, however no matter what it does after that (going through its processes - which only last seconds), the phone then returns to the black screen with the HTC text, basically the initial boot up screen and thats where it hangs. The only way to get it to do something is to use the volume up/down and power buttons.
Would any of you kind folk have any answers, help or assistance for this "sick" smartphone? I can get into the a
Any help would be greatly welcomed. Please be aware though, that I am not overly technical minded in the Android operating system, but have a bit of an idea. I have also repaired hardware on a couple of my previous smartphones, so will give anything a go.
Cheers,
N-I
Bgb
ات7غ
POOR HTC SUPPORT , HTC COMPANY