pls can any boddy give me that rom for that update process but still now mobile status was hang logo
What logo do you see on device startup? Vodaphone, Qtek, I-mate, Dopod... I don't know what ROM should I upload...
Edit:
BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3.exe
Related
When upgrading to a new rom i removed my qtek 9090 from the cradle.
Now i can't do nothing with it, it0s stuck in the USB and V20.6 page and even when i try the sme rom that it had before the upgrade it always says country error, i've tried the contry error fix but nothing ...
Can anyone help?
Thanks!
You will need to flash it with the original rom even if it is an old one.
Once you have got it up you can upgrade it to something else.
Wiki has the list of the original roms.
I have upgraded my i-mate PDA2K with de file (from i-mate web site) RUU172126WWE_imate.exe ,but I had problem with the phone ,it shuted down,and I couldn't turn it on , the black i-mate screen showed v2.02 and sometime nothing !!!so I decided to re-install de update file. This second update process stops with "ERROR 105 – this update is not desigtned for your dvice".i tried many times with no success at all, always the same ERROR 101.connection error... the power light is red!!!
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running. plzzzz help me
Thanks a lot.
Try using a rom that is for your device for all others will turn your phone into a paper wheight as you have noticed.
you need to download a rom that is from your carrier and start again.
Wiki
thanx but my problem that i can't connect my pda2k on the cardl!!!the sync can't find it
any one can help me - - there is no service center in france!!
Download a rom that is from your carrirer and your device, ( You say its a I-mate) you also say you are in france and I know of no frensh roms.
As you are stuck in bootloader, run the ship.exe as is, it should find the device.
Look nobody can help you if you tell us nothing. What do you mean by card. Have you read anything in wiki ?
XDA IIs stuck in boot loader
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Re: XDA IIs stuck in boot loader
barlas said:
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Click to expand...
Click to collapse
We really need more info. This is like asking to a mechanic: My car is broken, can you replace the engine...
So: What PDA do you have, what ROM versions installed, what version did you try to install, etc. etc.
But more importantly, have you read wiki?
Follow the link in my sig...it's all there.
i tried to install o2 rom 1.31 and previously there was 1.06. bootloader is v 2.06. now when i switch it on it is in serial mode. i hav tried to install shiped roms but no one detects my pda on sysncronous. i hav tried to use mda III rom using sd card but it says section 3 upgrade not alowed. tried o2 himaliye nb1 file it says trying himaliya upgrade on blueangle not alowed. this means i need nb1 file of XDA IIs. thanks
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
michielc said:
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
Click to expand...
Click to collapse
Shelltool only flashes the OS part of the DOC chip, not the splashes...
mestrini said:
Shelltool only flashes the OS part of the DOC chip, not the splashes...
Click to expand...
Click to collapse
Is it possible to replace the splash screens with the screens of the rom that I'm trying to install on my Wizard ?
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
shankyo said:
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
Click to expand...
Click to collapse
i have the same problem.somehow my p3600 radio is deleted.and now when i power on. it says NO GSM in start and then stuck on windows mobile 6.1 logo .
i installed new roms without Radio again stuck on start up logo.
whenever i installs radio rom it stucks on 13%.
i tried sdcard meathed it stucks on Gsm(Radio).
SO THE PROBLEM IS RADIO