I9000XXJPC has become a major headache, and now the sim card won't work with other firmware. The first time I updated via Kies, everything was fine for a little while. After realising it's buggy, I went back to JG4 and renamed nv_data.bin etc..
The second time I installed JPC for a bit of a play around was via Odin, and that went fine, but still buggy firmare. This time when I went back to JG4, the sim card doesn't work properly. It asks for the PIN, sits on "Unlocking Sim Card" for a bit, then asks for the PIN again, saying it's incorrect. After entering the correct pin another 2 or 3 times, TWlauncher appears, but there is no service.
Odin didn't make a backup of nv_data.bin, but I had made a copy myself just in case. Restoring this does allow Kies to see the proper product code, but makes no difference with the sim card.
Is there anything at all I can try? It seems as though flashing JPC via Odin has altered more than just the /efs directory, but I don't know what. It might also be possible that anyone else on JPC will discover the same if they go back to 2.1, but I hope it hasn't done too much damage. I tried another sim card from another network and it's the exact same situation (works only with JPC).
To anyone who hasn't tried I9000XXJPC, don't! It's not worth the hassle.
Basically, sim cards now only works with JPC..what can I do? I have 3-button recovery, so can try just about anything if need be.
http://forum.xda-developers.com/showpost.php?p=7940762&postcount=1
Thanks, I read and tried so much but somehow missed that. At least it's a known problem thanks.
Edit: I thought it had something to do with the dates of the files. hmmm now I'm stuck.
Related
Hello everybody, I hace a Galaxy S from Movistar (Spain) and I have tried to update to Froyo from its first beta version. I always get the same error. All works fine (maket, wifi, keyboard) but the SIM card is not detected. The phone starts and no ask me for PIN code.
Yesterday I tried the new froyo and got the same error.
Now I'm working fine with JM8 and JM4 modem (and of course the SAME SIM card).
When I updated to froyo first time with the beta version, I got an operator error code. I downgraded, all work fine and after taht I free my phone.
Could anyone help me to jump to froyo?
Kind regards
I doubt the operator thingy has got something to do with reading the actual card instead of just not recognizing his network. =/
Hardware- and softwarewise, you always get you pin verification, .. unless it's broken or you're missing a phone part?
I use the SAME SIM card with JM8 and other phones without any problem
I had this problem for the first time last night when I flashed to JP6. I finally got it working again by deleating the /efs/nv_data.bin and the /efs/nv_data.bin.md5 files (making sure the sim card is not in the phone when doing it)
I think the phone recreates those files from it's backup file. I'm a total noob at this and you might want to make sure this is correct before deleting anything. Is your product code correct?
macnessie said:
I had this problem for the first time last night when I flashed to JP6. I finally got it working again by deleating the /efs/nv_data.bin and the /efs/nv_data.bin.md5 files (making sure the sim card is not in the phone when doing it)
I think the phone recreates those files from it's backup file. I'm a total noob at this and you might want to make sure this is correct before deleting anything. Is your product code correct?
Click to expand...
Click to collapse
WATCH OUT WHEN DOING THAT.. You don't want to accidentally corrupt your IMEI (and I suspect doing that may cause that)
andrewluecke said:
WATCH OUT WHEN DOING THAT.. You don't want to accidentally corrupt your IMEI (and I suspect doing that may cause that)
Click to expand...
Click to collapse
Thanks for the warning. I managed to take a copy of everything before doing it. I made the mistake of not doing this at the very begining before flashing the JP6 update and have now lost the correct CSC info for the UK, but at least I kept my IMEI
The search continues
I will try at home this night
My SIM card is not readable on a JM1, coming from a JF3... im clueless
Hi, where do I find those files so that I can delete them. I am unable to get my SIM card recognised either! im on Vodafone UK
Alright, so I have lost track of the # of hours I have spent trying to solve this problem. I have a Samsung Captivate originally purchased from Rogers, and a Rogers Sim card. I flashed a custom rom onto my captivate, which was good but still gave me some problems. I somehow ended up when clearing something in the rom getting into a bootloop, so I could no longer access my phone.
I used Odin to go back to stock, but my phone gives me the "no sim card in phone" issue. I checked by putting another sim into my phone..same issue, and I put my sim in another phone...and it works fine..so it is not my sim card. I did *#7465625#
and Network Lock is on. I even flashed to Rogers froyo rom, since I am using a rogers sim card, but still get that problem. None of the market tools for unlocking the phone give me any codes...what should I do..?
The SGS Unlock tool from the market won't work on Froyo, as far as I know (I haven't bothered checking to see if it has been updated in the past few months, but it was a 2.1 only thing the last time I checked.)
There is a froyo unlock procedure in the development section. Have you tried using that after flashing your Rogers rom?
http://forum.xda-developers.com/showthread.php?t=831569
Edit: Oh yeah, make absolutely sure you back up /efs before you do anything, or you'll have your face ripped off if the procedure doesn't work for you.
Helroz has put out an app on the market to unlock 2.1 and 2.2 phones Havent tried it yet.... worth a shot...
kind of confused. I mean, I originally purchased my phone from Rogers, and my Sim is from Rogers. I am not sure if it was always locked to rogers, but it just says "no service" and doesn't recognize that I have a rogers sim card. even if network lock is on, shouldn't it still recognize my sim? The methods you have posted have not worked for me. Perhaps I should see if I can get an unlock code from Rogers themselves. If I could do that, would that solve the problem?
Also, if I somehow managed to get an unlock code for my phone, where would I enter it? Would I have to relock my phone to rogers? Could someone explain how I would do that?
Did you try a factory reset from the settings?
MikeyMike01 said:
Did you try a factory reset from the settings?
Click to expand...
Click to collapse
I have done a factory reset before, but i'll try doing it right now...see what happens.
ok I just did a factory reset...still telling me there is no sim inserted even though there is..any other ideas?
Alright so finally everything is showing as "OFF" including Network Lock but it still will not recognize my SIM. i did another factory reset but still no luck. Any other ideas??
What does it say in your APN Settings?
Can't access APN settings. infact, just going into "mobile networks" gives me "insert SIM card" even though it is already well-inserted
Sorry - I meant to say mobile networks - brain fart
[EDIT] The only thing i can think of would be to check the pins that contact the sim card... see if those somehow got damaged. Also check to ensure they are clean, blow out the sim card holder and if needed give the pins a wipe to clean them up and try again. If all else fails, try to get your hands on another sim from the same carrier and see if it works. If a different sim works, then yours is hosed most likely...
It's okay guys I managed to solve things in the end! thanks for all your help tho
rofl, it was backwards ey?
zeusx64 said:
rofl, it was backwards ey?
Click to expand...
Click to collapse
No way...
How did you end up resolving the problem? What ended up being the fix?
zeusx64 said:
rofl, it was backwards ey?
Click to expand...
Click to collapse
I wonder...I just couldn't bring myself to pose the question
for self-pride(not that I have any left after spending god knows how many hours searching in a hex editor for non existent damn unlock codes) I refuse to state how i resolved my issue -______________-; (cough). but THANK YOU ALL for your support anyways! I have definitely definitely learned from this horrible mistake.
bet it was inserted backwards
Quick background:
- I have an International version, sourced from Latin America
- I have rooted the phone but NOT custom ROM
- I have Straight Talk service
The phone was just working fine for almost 1 month, can receive call, SMS, etc. Just today, I shutdown the phone and took out the microSD card and SIM.
I copied some files to the microSD card using a reader and left the phone with the SIM and battery out for about 30 minutes.
I put the microSD, SIM and battery and rebooted the phone. Suddenly, I got Emergency Calls only!
I have tried to "fix" it but to no avail:
1). Looking at the 3 PIN in the SIM slot, they are all INTACT, nothing bend or broken or lopse
2). The SIM card works - tested it in another 2 different phone and can make calls, etc.
3). I did CWM recovery to a backup from 1 day ago (when the phone still works)
Anyone have this experiences or my phone just DEAD?
weird...
try do the hard reset (try not to restore anything yet), if still doesn't change anything... flash new radio (LC1)
I disassembled my Note using the instructions from here to check if any of the 6 (SIX) SIM Card connector is bent and it is NOT.
I am putting it back together now and will do factory reset (this is what you meant by "hard reset", right?). I will post back with updates/
PS: this is INDEED weird. The phone works OK, Wifi works, sound works, screen works, microSD card is readable, everything works EXCEPT the GSM connection! And I didn't even mess aroud with the custom ROM/kernel/radio!
did u test other sim card on that phone yet?
thehackersz said:
did u test other sim card on that phone yet?
Click to expand...
Click to collapse
I don't have an extra SIM card. What I did was take out the Straight Talk (ST) SIM card from my Note and put it in another unlocked GSM phone (Nokia N73). The Nokia N73 works with the ST SIM.
I just did a "Factory Reset" and still the same thing.
Before I try the radio flash, what will this "software" do to the Note modem? I am just curious how it will fix it.
BTW, my Baseband vesion is "BKK1", and I don't see the radio for this baseband in the link you provided. Which one should I use?
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
flashing the radio doesn't effect your rom... try them.
try to borrow your neighbor sim card first before flash new radio.
thehackersz said:
flashing the radio doesn't effect your rom... try them.
Click to expand...
Click to collapse
Which radio files I should use? The link you provided show multiple radios, but I don't see one for my phone:
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
Try to clean the Sim slot.
Yes, I tried cleaning the SIM slot. I have been very careful with my Note since day 1.
Someone mentioned that they have the same problem and was able to fix it by flashing STOCK ROM back.
I searched in the development section and could not find ROM for my phone (N7000UBKK1). Do you have any idea where I can get this from?
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
lanwarrior said:
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
Click to expand...
Click to collapse
Boy.. That's a serious issue man.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
Click to expand...
Click to collapse
LOL
Anyhow,
I found out the solution to this problem by accident, and there doesn`t appear to be a solution anywhere else on the internet. Turn off your phone and restart it. As soon as you are able to do so, open up setting, or any other app. When your phone goes into cool down mode, hold down the home button. A screen will come back asking you to select an app. Select whatever you opened prior to cool down mode (If you need to get into settings press the search button and search for settings after your out of CDM). You then need to do two things. Go to Running services (Settings>Applications>Running services), find detect battery service, touch it and stop it. To the best of my knowledge, it doesn`t do anything to your phone, other than activate cool down mode. Then go to manage applications (Settings>Applications>Manage applications) press your menu button and select filter> all applications. Find Battery protect, click on it, and select force stop. This allows your phone to get reception. You will have to do this every time your phone starts up, but it isn`t too much of a hassel for a truely excelent phone. The Cool down mode problem is definitly a software fault.
Source:
askmefast.com/My_galaxy_s2_shows_i_have_signal_but_says_emergency_calls_only-qna1783355.html
I'm also having the same problem and mine is also N7000UBKK1. Anyone know what's going on?
Try another rom. I have it on some roms and some not
Sent from my GT-N7000 using Tapatalk 2
Try the following link
http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207
If you can get into download mode then flash using PC odin
AbyssNotekernel42CWTouchOriginalLogo.tar
If it pass you can flash a GB rom in your sdcard.
HELP!!
I have also had this same problem. My phone is STOCK I have not touched it. got the phone on last Monday working fine until the battery level ran right down yesterday, then I got message to "insert sim card!", ever since re-starting the phone I no longer can make calls!. I had no intension of rooting or messing with this phone and decided to wait until official ICS, but now what do I do?, is this a common problem?.
Tried previous instruction on this post, but unable to find any battery service running on the device.
Please help!!
I now also have this issue after updating to the latest firmware via Kies.
UPDATE: I got mine checked and it looks like the replacement unit I got had its SIM card broken. Dodgy eBay seller.
Just fyi, never insert MicroSim card adaptor in Galaxy Note. Mine works now after spending $100. Jeez
FYI, I tried all of the suggested solutions in this thread and I still have problem. So I returned the Note and got the AT&T version... At least now I got US Warranty
Same thing just happened to my phone. Rogers Galaxy note II.
Tried bunch of different SIM cards, none work.
Got the SIM reader app, phone reads SIM just fine. Data connection also works, but refuses to make voice calls "emergency only".
So pissed, wanna throw this phone against the wall.
Did anyone find a solid solution? Mine did this today, Stock never been rooted or anything! Any ideas?
I just got a used AT&T Vivid with what turns out are 2 anomalies that I failed to observe initially.
First I tried to put my ST sim card out my AT&T SGS, and get no service. No big shock initially since I have to change the APN info. Couldn't do that cause option is dimmed.Checked further, No IMEI, IMEI SV, or baseband. Took sim out and observed that I get NO sim error at startup, just "no service". Tried an AT&T sim from a friends Vivid, same result.
I was hoping that the sim card reader just might be bad, a cheap easy fix and apparently some what of a common issue. Haven't ordered one yet until I get more info on whether the no sim error and no IMEI etc are related and it's not a more serious hardware issue. I don't have a problem with repairing hardware if needed.I'm a noob here, but have a brain like a sponge, so any thoughts on how to proceed with diagnostics would be appreciated. Thanks in advance
No imei is really bad...
No one here can help you recover it without a proper backup... I have no idea how to back it up nor restore...
If you don't figure it out I'd have to suggest flashing to stock... prolly via ruu and go to an at&t store...
Sent from my Vivid 4G using Tapatalk 2
I don't think (but don't know 4 sure) that this phone is anything other than an out of the box stock configuration. I don't have service with AT&T so I don't know how much help they would be. I did check with them to make sure IMEI printed on the phone wasn't blacklisted and it's OK. All I have done was to do a factory reset to clear all the PO's stuff.
Does anybody have any more ideas? I am wondering if I don't need to replace the motherboard and or just the simcard/sd part. Changing the motherboard would mean a different IMEI right?
No imei means something went wrong with the bootloader. It's unlocked? Did you try to S-OFF?
I believe flashing a rom stock via RUU (that's it, flashing the PD.zip file) maybe can fix the problem.
At worst you must change the motherboard and yes, you will have a diferent imei.
I may be wrong, but I see no sign that anybody has done anything to change ROM or anything else on this phone. I'll try to do a S-off, and unlock it since I want to use it on ST anyway.
hello,
i've also same problem here
flashed with stock rom but no luck ,
bootloader locked and s-off
searched forum but no success story
i think i'll return it
Well I finally got a new SIM/SD card reader and installed it. No change.Tried ST, AT&T, and T-mobile sims
Still get no SIM error when booting with or without a SIM card, has an X on signal strength, and it doesn't even say "no service".
Same as to IMEI etc. info, nothing shows up.
Am I going to have to change mainboard? Or is it possible firmware/ROM changes could fix it?
javierarenas said:
No imei means something went wrong with the bootloader. It's unlocked? Did you try to S-OFF?
I believe flashing a rom stock via RUU (that's it, flashing the PD.zip file) maybe can fix the problem.
At worst you must change the motherboard and yes, you will have a diferent imei.
Click to expand...
Click to collapse
Unlocked the bootloader tonight, no problem. Will try s-off tomorrow.
Where can I get a stock rom file?
I'll only ask this dumb ? once: Is the OS (JB,GB,ICS) different than the rom? I'm still running gingerbread 2.3.4, should I got to ICS or? Will that have any affect on the imei issue?
I might just be getting some experience with this phone if I have to do it all over with another mainboard.
OK, so I decided to play with this phone again after my SGS1 was freaking out yesterday. I finally found and used a phone dialer code do download the ICS update, and it downloaded (via wi-fi), installed and rebooted fine. In fact It apparently fixed my IMEI and SIM card problems because when it booted the first time with ICS it showed a big icon "no SIM installed" ya hoo!! checked IMEI in settings, all was good. Played around with settings/menus a bit to familiarize myself with the differences, then restarted...NO IMEI again, and no sim error without any SIM installed On the next 5-6 restarts it worked fine all but once, (total on time of around an hour) but now every restart (10+) it's back to same original issue: no IMEI shown and no SIM error. I still have no AT&T compatible SIM card to really test it but if it doesn't give me a SIM card error (no SIM card installed) it's a moot point.
It really puzzles me that it appeared to work at all if I have a bad mainboard. My daughter in-law has a Vivid with a bad screen she's going to give me to use for parts (mainboard) but I'm not sure if there's not still some hope of salvaging the current one.
Comment, thoughts etc... Please
Hi, I have S6500D and since it was quite slow, I decided to flash custom ROM. After some unsuccessful attempts I managed to get CM 11 working. But later I realized it's not detecting my SIM. It will find network operators, IMEI seems legit, but it won't connect. Also, if I inserted a SIM with pin lock, it actually asked me for pin, but after clicking OK it won't do anything. I've tried different network providers as well.. nothing.
Now, I have seen similar issue on some other Samsung device (I think) and the reason was that I had wrong baseband, which lead to the fact that the modem was not working at all. But with this, it just won't register the SIM card.
As last resort, I've flashed some stock ROM via Odin, but still the same. Any ideas what might be causing this?
Thank you for any advice.
//UPDATE: Well, I found the problem, only it's not on SW side, but hw one instead. As last resort, I have disassembled it, to find out that one of the SIM tray pins is broken.