Stupid...one more bricked wizard..G4 downgraded like G3..no boot screen :/(destroyed bootloader?)
Anybody had luck with repair center, with this problem?ANybody have repaired wizard?
I have upgraded G4 IPL & SPL on my G3 Vario and now I cant power it on at all, hard reset doesn't work, cant even enter to bootloader It's totaly bricked now. What should I do??? Thanks.
Search the forums for JTAG. Not easy but its doable I understand.
Good luck.
Does the Qtek 9100 have JTAG output on motherboard or do i have to solder the wires??
... or is it able to do it by classic USB cable (for example emulated as COM...) ??? I really dont like to solder the wires
Hi,
Unfortunally I bricked my Kaiser with a task 2a and read this post next http://forum.xda-developers.com/showthread.php?t=372497
Now I have no bootloader in it. Nothing except Qualcom Modem access via MTTY.
I managed to force usb with Frankekaiser soft and had a white screen on my Kaiser.
Does everybody know if I can flash a booloader with mtty ? Or my Kaiser is dead and need to be send back to HTC
Thanks a lot for your answers
Nobody ?
Hi,
i got HD7 stuck on htc logo
i did hard reset volume down plus volume up plus power .
but no luck.
then i update using RUU_Schubert_hTC_Asia_WWE_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
all update went ok 100%
but still stuck on htc logo
The same serious problem to me. I need help, please...
HD7
I also had the problem, i spoke to tmobile, they said its a htc thing and phone phone was replaced
i had the same prob .. just leave the handset after update with the rom file . it hang on startup logo very long . but leave it's say abt 30 min u find handset is on
and u getting error internal disk not remember exect word but that's mean ur mmc card is demage open ur handset remove mmc format in pc .if demage replace with new one . and vol down + power choses hard reset .. it know oki most of the time inter mmc demage couse of htc stop ... if handset in warrenty simply replace the handset cos it's open handset mean warrenty void.. so do before read
niki
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as ;
PD29*** SS-BC(4K)
SPL -5.11.2250.0(134400)MNG
sd sandisk 15193MB
partition info-v211v413
F400
but it doesn't shows "serial" and it doesn't connect to pc.
what should i do,pls help
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Evo4eva said:
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Click to expand...
Click to collapse
thanx for your reply,as i have never challenged u or my customer that i can repair any handset that i have recieved.i have discussed here the fact that its the customer's fone.and your reply is not to the context.Just read my problem and u have any solutions pls advice for the same if not just go to other post.
hi majeed
i have read in another post, that someone else has had the same problem...no seriel or usb on screen, dont worry about it.
once in bootloader just plug phone to pc and do what you have to do...still worked for them.
cheers and have a gr8 day
Thanx bro for reply but i have tried connecting in same condition to different pc's but i get error :260
not sure what your trying to do after you are in bootloader??
you have bootloader 5.xx
therefore you can only install same stock rom or find same but earlier rom to downgrade ur hspl. must be same region too.
cheers and have a gr8 day
Hi jhonny,
i tried to downgrade bootloader according to tutorial of ansar and his rom found somewhere in this forum and got hspl and rspl.first i tried to use rspl of dft but i could not succeed and got an error and then onwards no "serial" in boot loader screen and the result not at all connecting to pc.tried again resurrectin with riff but no use.
majeed said:
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as...
Click to expand...
Click to collapse
hi majeed, is the unit still under manufacturer warranty
HI MAJEED...
WHAT EVER I UNDERSTAND THAT YOU HAVE HALF BRICKED YOUR DEVICE.
YOU CAN ONLY REPAIR YOUR DEVICE USING GOLD CARD METHOD.
http://forum.xda-developers.com/showthread.php?t=893152