Related
I was stupid enough to update with OCLF installed and running. After updating my phone started up and i'm stuck at the "Touch the android to begin" with a bunch of "sorry" error messages popping up about the android.process.acore has stopped working kinda thing. I have tried recovering and still nothing.
Please, please, please help! Got the SGS as a recent present
I'm with vodaphone if that helps?
Thanks!!
Go into recovery mode (vol up + menu button + power) and do a factory reset.
Bynar010 said:
Go into recovery mode (vol up + menu button + power) and do a factory reset.
Click to expand...
Click to collapse
already done, about a million times
can u please state your froyo firmware version?
Loaded Chief said:
I was stupid enough to update with OCLF installed and running. After updating my phone started up and i'm stuck at the "Touch the android to begin" with a bunch of "sorry" error messages popping up about the android.process.acore has stopped working kinda thing. I have tried recovering and still nothing.
Please, please, please help! Got the SGS as a recent present
I'm with vodaphone if that helps?
Thanks!!
Click to expand...
Click to collapse
hmmm
thats weird me and my friend both did this. and he got the error messages too. Couldn't do anything at the start wizard.
His didn't have the 3 button reset so he went onto http://developer.android.com/sdk/index.html
and rebooted his galaxy with the sdk tools into recovery mode. and did the factory reset from there.
ARE YOU SURE u did the factory reset right? cus it SHOULD work
You are going to need to reflash your stock firmware using odin. Recovery mode is not going to help you at this point.
newter55 said:
You are going to need to reflash your stock firmware using odin. Recovery mode is not going to help you at this point.
Click to expand...
Click to collapse
ABSOLUTELY agree with u,i screwed mine to with OCLF uninstalled b4 i flash a new firmware but reflashing again with odin does help
Hey guys, i need some help, its rather urgent.
I was trying to do a lag fix. It said it didn't work, and proceeded to restart.
went to the i9000 screen for 3 second, and just kept restating. can't get into recovery anymore. i got into download mode, and tried to flash back to stock with odin. odin said everything worked, but its still stuck in the same boot screen loop.
Any ideas? Is it the internal SD card? It is a bell i9000.
Thank you in advance.
Most dedinately the infamous corrupt SD issue. You're on 2.2 which is why it loops at the i9000m screen. If you flash 2.1 it will get to the glowing s screen then the screen will go black and it will stay like that.
You need to take it in for repair. There are many threads on this issue and other user experiences with the repair process
Sent from my GT-I9000 using XDA App
hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it
Anyone try the above post? Does it work out for anyone else?
Ok Thx, trying it out right now
Hisho2050 said:
hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it
Click to expand...
Click to collapse
I just tried it. Didn't work I guess I have to send in for repair.
13a said:
I just tried it. Didn't work I guess I have to send in for repair.
Click to expand...
Click to collapse
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.
Rumble6059 said:
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.
Click to expand...
Click to collapse
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.
13a said:
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.
Click to expand...
Click to collapse
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt
No, I have not. I will give it a try tonigt with the re partition. Thx.for the suggestion.
Sent from my SGH-I897 using XDA App
Rumble6059 said:
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt
Click to expand...
Click to collapse
Just tried it. didn't work. Thx tho.
I have been flashing for 4 months or so. During this time it has all been without incident. I have flashed 3 Captivates (mine being one of them, has been flashed 6-8 times) and one ARIA.
I recently flashed my daughters Cappy to Froyo 2.2. She is now wanting her phone to look like mine was (key word "was" more on this later) running Serendipity. I tried to flash v6.2 using CWM and found when I was in restore mode I was never given the option to load from sdcard. So here I'm stuck. Can the ROM actually be flashed from Froyo 2.2, simply?
My phone I went for the Serendipity v5.12 to v6.2 clear and reinstall. I had a major problem during the ODIN flash that flat-lined my phone. I've purchased a jig and am awaiting its arrival. I understand how the jig works, but don't really understand the next steps after getting into download mode! What steps do I take next? Do I start flash back to 2.1, do I just install Serendipity over what I had? Throughly confused!
tomween1 said:
I have been flashing for 4 months or so. During this time it has all been without incident. I have flashed 3 Captivates (mine being one of them, has been flashed 6-8 times) and one ARIA.
I recently flashed my daughters Cappy to Froyo 2.2. She is now wanting her phone to look like mine was (key word "was" more on this later) running Serendipity. I tried to flash v6.2 using CWM and found when I was in restore mode I was never given the option to load from sdcard. So here I'm stuck. Can the ROM actually be flashed from Froyo 2.2, simply?
My phone I went for the Serendipity v5.12 to v6.2 clear and reinstall. I had a major problem during the ODIN flash that flat-lined my phone. I've purchased a jig and am awaiting its arrival. I understand how the jig works, but don't really understand the next steps after getting into download mode! What steps do I take next? Do I start flash back to 2.1, do I just install Serendipity over what I had? Throughly confused!
Click to expand...
Click to collapse
For your daughter's Captivate , did you try rebooting the phone and getting back onto recovery mode to see whether it was just a weird recovery boot ? LOL idk , I never heard of that one , but it may be fixed through a simple reboot . IF that doesn't work , try flashing another kernel through Odin + Download Mode .
For your Captivate , once you get to download mode , flash DG's stock Captivate Eclair (It has the 3-button mode fix , just in case you might not have it or ... just in case) . If that goes great , then install Rom Manager to get CWM , then start flashing again .
Yeah I'm kinda skipping steps , but you said that you've flashed before , so it should be a piece of cake to fit in the pieces together .
There are also other methods like Master Clearing , flashing another stock ROM , etc. but the method I posted has always helped me in tight situations .
BTW , does your captivate have the 3-Button combo ?
dayloooo said:
For your daughter's Captivate , did you try rebooting the phone and getting back onto recovery mode to see whether it was just a weird recovery boot
Click to expand...
Click to collapse
Yes I tried several times. Always getting the same options, always excluding sdcard option.
dayloooo said:
IF that doesn't work , try flashing another kernel through Odin + Download Mode
Click to expand...
Click to collapse
Why would I flash a different kernel to stock Froyo?
dayloooo said:
There are also other methods like Master Clearing
Click to expand...
Click to collapse
This is where I was when the catastrophe hit!
dayloooo said:
BTW , does your captivate have the 3-Button combo ?
Click to expand...
Click to collapse
FYSA yes It does....did
tomween1 said:
I have been flashing for 4 months or so. During this time it has all been without incident. I have flashed 3 Captivates (mine being one of them, has been flashed 6-8 times) and one ARIA.
I recently flashed my daughters Cappy to Froyo 2.2. She is now wanting her phone to look like mine was (key word "was" more on this later) running Serendipity. I tried to flash v6.2 using CWM and found when I was in restore mode I was never given the option to load from sdcard. So here I'm stuck. Can the ROM actually be flashed from Froyo 2.2, simply?
My phone I went for the Serendipity v5.12 to v6.2 clear and reinstall. I had a major problem during the ODIN flash that flat-lined my phone. I've purchased a jig and am awaiting its arrival. I understand how the jig works, but don't really understand the next steps after getting into download mode! What steps do I take next? Do I start flash back to 2.1, do I just install Serendipity over what I had? Throughly confused!
Click to expand...
Click to collapse
flash the leaked odin froyo from designgears REV02. you should fine after that
Which can be found here: http://www.megaupload.com/?d=QL6NX702
1. Open that .exe found in the .zip in the link above. (Make sure you run the .exe!)
2. Put your phone into download mode.
3. Plug in the USB.
4. The program (Odin One-Click) should find the phone.
5. Basically follow the only option you get, and it'll be done for you automagically (apart from 'Master Reset', which you might want to do AFTER you finish resetting it back to stock).
tomween1 said:
I have been flashing for 4 months or so. During this time it has all been without incident. I have flashed 3 Captivates (mine being one of them, has been flashed 6-8 times) and one ARIA.
I recently flashed my daughters Cappy to Froyo 2.2. She is now wanting her phone to look like mine was (key word "was" more on this later) running Serendipity. I tried to flash v6.2 using CWM and found when I was in restore mode I was never given the option to load from sdcard. So here I'm stuck. Can the ROM actually be flashed from Froyo 2.2, simply?
My phone I went for the Serendipity v5.12 to v6.2 clear and reinstall. I had a major problem during the ODIN flash that flat-lined my phone. I've purchased a jig and am awaiting its arrival. I understand how the jig works, but don't really understand the next steps after getting into download mode! What steps do I take next? Do I start flash back to 2.1, do I just install Serendipity over what I had? Throughly confused!
Click to expand...
Click to collapse
I dont think anyone that responded actually understood what you were saying, possibly myself included.
First part(daughter), froyo 2.2 stock has 3e recovery that requires a signed update.zip. You need to root it to install the modded 3e recovery in the dev section that removes the signature verification. OR flash it back to 2.1 with oden(yes downgrade it to upgrade it). Im sure there are other methods, those are just 2 i can think of off the top of my head.
Then you can install cwm with a cwm update.zip that is floating around the captivate forums.
From there you can install any rom with the normal methods.
Second part(you), odin bricks phones. Its not talked about very much but its easy to do. Your usb cable was probably loose, or bad, and cause an error and your phone soft bricked. Once you get the jig, pop it in get into download mode - start odin - connect the phone to the pc - wait for odin to detect it - flash 2.1 - flash serendipity.
If im understanding your problems correctly.
venomio said:
(apart from 'Master Reset', which you might want to do AFTER you finish resetting it back to stock).
Click to expand...
Click to collapse
Meaning after a new rom is no longer wanted? It's already stock.
So what you want to do is to Master Clear the Stock ROM before you install the new custom ROM on to it. This will prevent any possible problem coming up while flashing. (Of course, it will clear all data in your internal SD).
whiteguypl said:
Your usb cable was probably loose, or bad, and cause an error and your phone soft bricked
Click to expand...
Click to collapse
You hit the nail on the head I was half way through Odin when my computer made the disconnect sound and then reconnected immidiatly I kinda figured I was [email protected]@k?$ at this point. This was different though, because I've been able to come out of soft boots befiore. No doubt I was playing w/ fire thoes times
Thats exactly why I wanted to get a jig before I started any of my ROM flashing. I had an issue when I started Recovery Mode would just prompt restart and other things off the bass menu, when I tried to back up.
I had to flash 2.1 Eclair and then master Wipe it. Then I was able to do anything to.
Sucks you bricked it. EVERYONE Bricks one time at least one electronic device.
<--PSP Bricker
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.
Hey all,
I'm new to this rooting business, and to make a long story short, after I finally figured out how to root 2.3.5 Gingerbread, I tried flashing a ROM or two to see how they work. I messed up while flashing, and resorted to using Odin3 One-Click downloader to completely clear everything on my phone. This brought me back to the 2.1 Eclair version, and now I am wondering how can I upgrade it back go 2.3? I tried using Kies, but it gets stuck at the MTP stage on my phone. Any ideas or suggestions would be greatly appreciated, I'd rather not be stuck on 2.1 even though it was my own fault
you need to go under the development section and look for the sticky with Odin one click and download a gb version that has cwm injected into the kernel
Sent from my SGH-I897 using XDA Premium App
Thanks for the help. I looked around for a few hours but couldn't figure it out. The problem is I can't go into Recovery mode, and the only option seems to be the abd, which I'm not confident in doing haha.
kenwang2688 said:
Thanks for the help. I looked around for a few hours but couldn't figure it out. The problem is I can't go into Recovery mode, and the only option seems to be the abd, which I'm not confident in doing haha.
Click to expand...
Click to collapse
Can you get into download mode? If not, you screwed yourself over by flashing Eclair bootloaders. I think you would need adb in that case.
korockinout13 said:
Can you get into download mode? If not, you screwed yourself over by flashing Eclair bootloaders. I think you would need adb in that case.
Click to expand...
Click to collapse
I cannot get into download mode...when I plug in the USB it just goes directly into charging the battery. Do you know of any good videos or links that I can use for adb?
You have to hold buttons to get to DL
b-eock said:
You have to hold buttons to get to DL
Click to expand...
Click to collapse
Yeah, I press the Vol up and down and then plug it in, but it just shows the charging signal
Is there a kernel you can flash for 2.1 that has an extended power menu? That would allow you to select a reboot into download mode. But I have no idea if that kernel exists since 2.1 is a long long time ago. (what a miserable time that was)
So I managed to flash a Heimdall One Click 2.2 version, but the problems I have with that are that it doesn't let me connect to neither Wifi nor 3G. I was going to try to upgrade it to 2.3, but when I connect it to Kies, it gets to the point where it talks about upgrading my software, but when the process of upgrading actually begins, it gets stuck and says it could not complete the upgrade. Any ideas of what to do now?
Thanks for all the previous help
capocaccia said:
Is there a kernel you can flash for 2.1 that has an extended power menu? That would allow you to select a reboot into download mode. But I have no idea if that kernel exists since 2.1 is a long long time ago. (what a miserable time that was)
Click to expand...
Click to collapse
kernels don't contain the power menu at all...
that is in the framework-res.apk, the framework.jar and the android.policy.jar. which is contained in the rom, be it stock or custom.
kenwang2688 said:
So I managed to flash a Heimdall One Click 2.2 version, but the problems I have with that are that it doesn't let me connect to neither Wifi nor 3G. I was going to try to upgrade it to 2.3, but when I connect it to Kies, it gets to the point where it talks about upgrading my software, but when the process of upgrading actually begins, it gets stuck and says it could not complete the upgrade. Any ideas of what to do now?
Thanks for all the previous help
Click to expand...
Click to collapse
ditch kies...its garbage.
just grab a stock gingernread package from HERE since you used odin one click to 2.1 (that flashed eclair bootloaders, which is why your button combos were mesed up) you will need a a gingerbread package WITH bootloaders.
studacris said:
kernels don't contain the power menu at all...
that is in the framework-res.apk, the framework.jar and the android.policy.jar. which is contained in the rom, be it stock or custom.
ditch kies...its garbage.
just grab a stock gingernread package from HERE since you used odin one click to 2.1 (that flashed eclair bootloaders, which is why your button combos were mesed up) you will need a a gingerbread package WITH bootloaders.
Click to expand...
Click to collapse
Since I upgraded to 2.2 with Heimdall, am I still able to use the Odin?
Yes, you can still use Odin.
You may need to uninstall the heimdall divers, then reinstall the Samsung ones first.
For Future connection issues consult this thread