[Q] Root Backups - Captivate Q&A, Help & Troubleshooting

Hey Guys I am using a Captivate SGH-1897 Baseband I897UCJF6 and Kernel version 2.6.29 jataek.lee (at symbol) sep-11 #2
I was wondering now that I have root access and set up my phone is there an easy way to make an update.zip out of my current configuration so that in case i brick my phone instead of flashing a stock ROM back onto the phone I can have my configuration flashed back to when i performed my last backup. Please advise if someone has any idea on how to do this.

The problem with you idea is that depending in the state of your phone your may note be able to get into recovery in order to rerun an update zip.
Sent from my SAMSUNG-SGH-I897 using XDA App

Best bet is to just use Titanium Backup to restore your apps/data. Then you could use Odin 1 Click back to stock if it ever "bricks".

Related

Where can I get original Vodafone UK firmware?

I'm sending my SGS in for a power buttone repair, but I am stuck on stock froyo atm, how can I get it back to stock vodafone uk firmware?
I don't think you can. Carrier roms are difficult to find. Good luck hunting.
You need to find someone with this software and get him to create a backup of his ROM and than flash it over! For this I prepared scripts to create a backup of the whole Samsung Galaxy S GT-I9000 without flashing.
I suggest you first backup data on the friend's device (be careful), then do a factory reset, root the device (it is also possible without installing/copying anything to it) and than make backup images (backup ROM), restore your friends data and flash the ROM over to your phone (don't flash boot partitions if it is not needed).
You can get it at: http://gw.tnode.com/0469-Android/f/
Steps: Get into Linux, connect over USB and set USB debugging mode, get ADB to work (./bin/adblinux), root the phone (script ./doroot.sh) and make a backup with ./dobackup.sh.
Note: Use at your own risk! Feel free to modify it and sent patches.
More info on: http://gw.tnode.com/0469-Android/
A work around is to flash back to Eclair then use Kies to update to Vodaphone software or try Kies Registry Patcher .
jje
Download "check fus" from market. It will give you the URL for the ROM and decode password (search on here for decode.exe). Then use odin to flash it.
Sent from my GT-I9000 using XDA App
http://fus.samsungmobile.com/Phone_...0GVODJP7_I9000BUJP5_I9000BUJP7_BU_VOD.zip.enc
DECRYPT CODE: 217631
Sent from my GT-I9000 using XDA App

[Q] newbie wants to root SGS I9000 - quick advice!

Dear all
Please bear over with this newbie question, but now I've spend around 10 hours searching/reading in this forum and on the internet so now I feel I've made a decent effort of trying to find the answer I'm looking for, before asking stupid questions.
I want to root my Samsung Galaxy S I9000 phone, in order to (primary reason) modify the hosts-file and avoid ads! The phone is 1 week old. I'm concerned about guarantee, but people has written that I should not be concerned because I can always revert back. I've used appbrain to export a list of applications and I'll unmount the SD-drive before attempting. I've found out that I'm running (typing *#1234#):
PDA: I9000XXJPY (= "baseband version" under settings)
PHONE: I9000XXJPY
CSC: I9000OXAJPY
Build Info: 2010.12
And from settings I know my:
Firmware version: 2.2.1
Kernel version: 2.6.32.9 (it also says: "[email protected] #1")
Build number: FROYO.XXJPY
MY IDEA:
------------
To begin installing Android SDK (on either windows or linux) + Odin3 (think version 1.7 is latest, it's only on windows, right?). Then I think I should install Clockwork Mod Recovery (CWM) + nandroid...
====> Question 1:
I think first step is Odin3 which will root the SGS I9000 phone... Correct? I guess it's as easy as here:
http://www.theandroidsoul.com/how-to-root-xwjvb-and-install-clockwork-mod-cwm-recovery/
Correct ?
====> Question 2:
Should I use z4root or superOneClick from http://shortfuse.org/ ? I think I've read that z4root is the best, however abedi here has the exact same software as me and he says/writes it hangs:
http://forum.xda-developers.com/showpost.php?p=13025681&postcount=2878
??? Which to use?
====> Question 3:
I read this:
6.I want to install new firmware but I want to have a backup of my original firmware to go back to in case I need to go back for warranty reasons. Can I backup my original firmware somehow?
As of now, there is no way of backing up firmware entirely. However, there are firmwares out for every region and virtually all regions have received a 2.2 or 2.2.1 upgrade which can be applied through Kies or Odin.
Click to expand...
Click to collapse
(from http://forum.xda-developers.com/showthread.php?t=723596 )
So how do I restore everything if I need my warranty and if I need to return the phone?
====> Question 4:
If I have to root the phone before backup up, then how can I restore everything back to the state before I rooted it? I don't understand that. And is it nandroid or CWM I should use?
I still don't get it... In my opinion, making a complete backup of everything should be done before rooting - however it's a contradiction I think that you need to be root, in order to backup because then it's a rooted backup and not an unrooted backup???
====> Question 5:
When I've done the above, is it then a good idea to try this?
http://romkitchen.org/sgs/?s=generator
I've also read that this "Darky's ROM" should be good... I found something here:
http://forum.xda-developers.com/showthread.php?t=814091
Is it correct, that this is good (the best that is currently available?)?
Finally: Thanks for your time - I appreciate your answers and any hints/suggestions. I've taken myself time to read a lot, however there's too much information out there and I need to clarify the above before taking the next step. Another problem is that google and the forum probably have some outdated information here or there and that discourages me a bit. Please help/advice!
Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=939752
http://forum.xda-developers.com/showthread.php?t=723596
I've also read that this "Darky's ROM" should be good... I found something here:
http://forum.xda-developers.com/showthread.php?t=814091
Is it correct, that this is good (the best that is currently available?)?
Most help / broke my phone posts on this forum are Darky rom . You choice .
Rom Kitchen stable roms and help on dev thread .
FAQS here
http://forum.xda-developers.com/showthread.php?t=817703
I think first step is Odin3 which will root the SGS I9000 phone... Correct? I guess it's as easy as here:
http://www.theandroidsoul.com/how-to...-cwm-recovery/
BIG NO thats Beta Gingerbread .
personally i would wait for official Release of Gingerbread 2.3 . Download your official update via kies and back that up then go to rom kitchen and build a custom rom
.
jje
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=939752
http://forum.xda-developers.com/showthread.php?t=723596
I've also read that this "Darky's ROM" should be good... I found something here:
http://forum.xda-developers.com/showthread.php?t=814091
Is it correct, that this is good (the best that is currently available?)?
Most help / broke my phone posts on this forum are Darky rom . You choice .
Rom Kitchen stable roms and help on dev thread .
FAQS here
http://forum.xda-developers.com/showthread.php?t=817703
I think first step is Odin3 which will root the SGS I9000 phone... Correct? I guess it's as easy as here:
http://www.theandroidsoul.com/how-to...-cwm-recovery/
BIG NO thats Beta Gingerbread .
personally i would wait for official Release of Gingerbread 2.3 . Download your official update via kies and back that up then go to rom kitchen and build a custom rom
.
jje
Click to expand...
Click to collapse
Ok, thanks a lot for your advice/comments.
I've already looked a bit into some of the links. And as I see it, there are still some questions that remains unanswered, but there are also some very good answers (and thanks for that, i.e. use ODIN for updating the rom).
An example where I'm still confused (hope I've not overseen something):
====> Question 2:
Should I use z4root or superOneClick from http://shortfuse.org/ ? I think I've read that z4root is the best, however abedi here has the exact same software as me and he says/writes it hangs:
http://forum.xda-developers.com/show...postcount=2878
??? Which to use?
And my question 3 is directly related to one of the links you posted and I'm asking for an explanation of the contradiction in the fact that some people say I can make a 100% backup/restore and the link below says it's impossible:
====> Question 3:
I read this:
6.I want to install new firmware but I want to have a backup of my original firmware to go back to in case I need to go back for warranty reasons. Can I backup my original firmware somehow?
As of now, there is no way of backing up firmware entirely. However, there are firmwares out for every region and virtually all regions have received a 2.2 or 2.2.1 upgrade which can be applied through Kies or Odin.
(from http://forum.xda-developers.com/showthread.php?t=723596 )
So how do I restore everything if I need my warranty and if I need to return the phone?
In Q4 I ask whether to use nandroid or CWM (not quite sure about both):
====> Question 4:
If I have to root the phone before backup up, then how can I restore everything back to the state before I rooted it? I don't understand that. And is it nandroid or CWM I should use?
I still don't get it... In my opinion, making a complete backup of everything should be done before rooting - however it's a contradiction I think that you need to be root, in order to backup because then it's a rooted backup and not an unrooted backup???
bit difficult for me to answer as i have just double bricked my phone .
Double brick = even Odin dont want to recover the phone .
jje
Ok, thanks jje.
I still hope somebody can/will answer Q2+Q3+Q4 in their own words, before proceeding (maybe with something stupid that'll void warranty and maybe something worser)...
As for rooting, I have never had a problem with Super One Click...I used it on both my phone and a coworkers.
Just remember if it hangs, change your USB debugging setting (either turn it on or off, depending).
Sent from my GT-I9000 using XDA Premium App
You can't really do a full backup until you root. That first step just has to be a leap of fate. Once you are rooted, use the instructions for hardcore's speedmod kernel to flash a cwm enabled kernel via odin. Then, go into recovery mode and use the clockwork settings to make a nandroid backup.
As for the contradiction, some things will not change when you flash a nandroid backup, such as file system settings and modem. Therefore to return the phone to a warrenty state you need to download the original firmware and flash it via odin. However, for normal use, nandroid backups do just fine.
Sent from my GT-I9000 using XDA Premium App
rschenck thanks for both replies! My final question/comments comes here!
1) Super One Click didn't hang at all. Installed perfectly without problems (usb enabling was on the whole time). To answer my own question 2: I decided not to try z4root because I read that it is not maintained anymore - just for the record. Maybe some other newbie can use this info.
2) This is a perfect answer to the other things I was wondering about. However, please clarify if you by this "…use the instructions for hardcore's speedmod kernel to flash a cwm enabled kernel via odin…" mean that I should look here:
http://forum.xda-developers.com/showthread.php?t=822756 ???
THANKS!!! This wasn't that hard after all... Hopefully nothing will ever break and hopefully I'll never need/get warranty issues...
Firstly gaining root access to access the hosts file is SIMPLE
Superoneclick v1.6.5 roots every sgs I have ever come across (personally I have rooted 4 different ones now) and I have used it to root a xperia x8 as well
I would then recommend downloading the busybox installer from the market and letting that install the latest stable busybox.
then ADFREE also from the market will modify the hosts file and automate the process of keeping that up to date.
on the choice of z4 my only experience was of that not working at all for me so that's all I can add to that.
personally beyond that I use odin to flash the voodoo lagfix and sound mod kernel with CWM and I love that. It's brilliant but I recently did someone elses SGS and it didnt want to play so I used the speedmod kernel with CWM instead. The quadrant scores aren't as high but it seems stable enough and quadrant isnt everything.
CWM will effectively let you back up the whole rom but in order to make effective backup's a simple rooted phone is enough CWM is not a requirement. With something like titanium back up from the market you can make all the back ups you want on a stock phone as long as it is rooted. Personally I do a CWM backup every couple or three weeks, but I do 2 different nightly backups with a weekly full backup scheduled on titanium and I use the titanium media sync to push the backups to my dropbox. This way I always have "belt and braces".
Might seem like overkill but I have around 350-400 apps installed at any given point. 5 lots of push e-mail etc etc etc.
(that should cover question 2&3 I think)
question4
Superoneclick will allow you to remove the the hack and the superuser and busybox programs.
you seem a little confused, there is a difference between hacking the phone for superuser (root) access (which is all you really need and can be done above with one click and no odin etc) and hacking the phone to modify the boot loader which is what clockworkmod is. This changes the recovery area of the phone.
typically when you do this you use odin to flash a new kernel which will include the clockworkrom recovery bootloader.
this is more risky (but still almost always recoverable from in my experience) typically the new kernels include a root solution so flashing a kernel does not require the phone to be rooted already. Usually flashing a new kernel will add extra benefits or features such as the option to change the filesystem that the phone uses to a faster one than the default used by android (this is usually called lagfixing).
technically I would guess that any of these things COULD invalidate warranty but in reality I doubt they would and you should be able to reverse almost any of them prior to returning a device under warranty. personally so far I have screwed up my phone and others a number of times and I haven't once found something that darkyy's ressurection rom hasnt been able to rescue me from. Worst case I flash that then reflash with a stock rom. (I've been able to do this when I have forgotten to unlagfix a phone when I have checked efs or repartition by mistake all sorts, I have had phones in the condition where the wouldnt accept any sim card and darky's has got me out of all these states simply repartition with the resurrection rom and bob's yer uncle)
Hope that answers your questions and helps you understand the differences.

[Q] Need root only for backup

Hello to all,
can anyone please advise, which file should i install that would suit my firmware best !
Model number:GT-I9000
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernel version: 2.6.35.7-I9000BOJV8-CL273008 root DELL154 #2
Build number: GINGERBREAD.BOJV8
I really appreciate if anyone could help me.
Thanks to all
Try the CF-Root kernel.
Sent from hell to take your soul
Thank you, Lunchbox for your fast reply !
But there are many CF-Root-Kernels.
Which one is the right ?
Sorry, but I am a newbie in Kernel-choice....
if you cant be bothered flashing kernels etc here is the the superoneclick method...
http://www.youtube.com/watch?v=SuaXu8kusvA
just follow that and you will be rooted, then get titanium backup and do a batch backup
Use CF-Root for the JPO firmaware you have. Each kernel has the firmware extension at the end of its file name.
Sent from my GT-I9000 using XDA Premium App
Superoneclick I have testet, but without success .
Does kernel JPO really fit my kernel JV8 ??
Same problem here.
After updating a t-mobile branded I9000 to 2.3.3 via KIES (including wipe) my programs and settings are gone.
All data has been saved in TitanBackup. Unfortunatly TB needs root.
SOC didn't work, now I'm looking for alternatives.
Heard, that cf-root can fix my prob, but still got following questions:
will cf-root work on my branded galaxy?
which cf-root version do I need?
Screeningsleeper
Is there no solution available ?
As far as I know it is possible to root the Galaxy with the FuguRoot.
One thing that is still missing is the correct Odin flashable stock kernel.
Till now there is no kernel for the I9000BOJV8 available at Samfirmware.
I'll keep looking for the kernel.
Hoping to get a quick solution.
Screeningsleeper
Did anyone have new ideas for rooting the T-Mobile Gingerbread?
After long time of searching the web I still found nothing relevant.
Screeningsleeper
Push
Nobody a solution for rooting phone without flashing the ROM for T-Mobile branded PV8 gingerbread?
Same problem here, still waiting .
A week ago I flashed my. T-Mobile with. 2.3
5 JVS and rooted it. Now all is running well.
Yesterday, with the help of this thread :http://forum.xda-developers.com/showthread.php?t=1139050, I manage to turn my 6h eating battery brick, into a real rooted phone, thank you guys!
Screeningsleeper said:
Same problem here.
After updating a t-mobile branded I9000 to 2.3.3 via KIES (including wipe) my programs and settings are gone.
All data has been saved in TitanBackup. Unfortunatly TB needs root.
SOC didn't work, now I'm looking for alternatives.
Heard, that cf-root can fix my prob, but still got following questions:
will cf-root work on my branded galaxy?
which cf-root version do I need?
Screeningsleeper
Click to expand...
Click to collapse
I also upgraded FW from 2.2 to 2.3.3 via kies last week and lost my root - but flashed this to my phone and got root back. link to where to get it:
Originally Posted by haloimplant
I tarred it up, not sure if that is necessary. (First time using megaupload hopefully it works)
Rooted KG3 kernel: http://www.megaupload.com/?d=410SOQHD or http://www.megaupload.com/?d=8DH9UR4L (first one comes up unavailable sometimes?)
Odin 1.82: http://www.megaupload.com/?d=1IKLKDPB
Just open Odin, put the tar file as PDA, put the phone in download mode, plug it in, wait for the box under ID:COM to go yellow and the 'added!' message and hit start. It will be done in a few seconds. Install superuser and busybox from the market to see if it works.
Like I said earlier it didn't work right away for me, superuser just FC'd on the first boot. Not sure if it was reflashing or rebooting that fixed it. Just a warning that some tinkering might be required.
OK, Problem solved.
Using the Easy rooting toolkit created by DooMLoRD from here.
Works like a charm for my Galaxy I9000 (PDA I9000BOJV8, Phone I9000XXJVO, CSC I9000GDTMJV7) wih german T-Mobile branding.
Rooting took 3 Minutes, no Problems with this.
Need root only for backup
Hello xda-developers.com
I need some help according to this title "Need root only for backup" I hope I am here correctly.
My problem is:
The Phone turns automatically off without doing anything.
I started it but it get's in a loading loop.
I don't want to make a reset until I backup the data from my phone contacts, pictures etc...
I read in an other forum that it is posible to flash only the kernel via ODIN CF-ROOT_....
to activate some mounts & storage - usb in recovery. So the PC can use the phone as USB device to copy all data from the phone to the PC. Is this correct?
If yes i will need the correct CF-ROOT for this version below i tryed to find the CF-ROOT for this version but I did not find it for my version. Can you help me please?
My phone can load the download mode.
Model
GT-I9000
firmware-Version
2.2
Basisbandversion
I9000XXJPK
Kernel-Version
2.6.32.9
[email protected] #1
Buildnummer
FROYO.BGJP3
If not which other possibilities do i have to Backup the data from the phone to my Pc?
I need the data the contacts and the rest of the files because its my business phone and i don't have the acctual backup of the phone
After I've saved my data I will flash the phone to one of the newest versions.
I hope that someone can help me with this problem :S
thanking you in anticipation!
BR
dragon2030
You can use this CF-ROOT,took here on XDA!
http://forum.xda-developers.com/attachment.php?attachmentid=408539&d=1285618588
Nezys said:
You can use this CF-ROOT,took here on XDA!
http://forum.xda-developers.com/attachment.php?attachmentid=408539&d=1285618588
Click to expand...
Click to collapse
THANKS A LOT!!
The version *-v1.1* doesn't matter?
what means v1.1, Froyo v1.1?
USB storage in recovery mode not listed
Hello
I flashed the Kernel with CF-Root-JPK-v1.1 but i can not activate the USB storage in recovery mode. It's not listed.
Is this not possible or why is this not listed?
If backup my data in this way is not possible.
How can I backup my data from the Phone when the Phone is in a boot loop? :S
Br
dragon2030

OTA / KIES Update Failing...

Hi All,
Quick bit of advice, Failing on the OTA update at the moment,
I'm running;
- Android: 4.0.3
- Baseband: N7000XXLPT
- Build: IML74K.XXLQ2
Wondering if it's the fact I am running SpeedMod K3-11 which is why it's failing? Anyone else seeing this?
If so - wondering if I can reflash the stock kernel via Mobile Odin...
I have the ROM - N7000XXLQ2_N7000XXLPT_N7000CPWLP4_HOME.tar.md5 file - Is it the case that I extract the ZImage from this file to obtain the Stock ROM Kernel?
As stated here http://forum.xda-developers.com/showthread.php?t=1371007
Note: I upgraded to this current version of ICS OTA - I DID NOT flash the above file via PC Odin.
I know I could get around it by reflashing in PC Odin but I'd like to not have to go that route..
Cheers
I was facing the same problem with OTA update on my stock rooted speedmod loaded Note. I thought the custom kernel is preventing the process. So my way was to flash the whole stock rom via PC Odin. Good thing it was a non-wipe version.
And yes, the zImage you pull from the rom is the stock kernel.
Cheers,
Not sure what's up with OTA..
However think the PC KIES issue is due to the fact that once again my PC seems to have lost the drivers needed to recognise the device in Download mode..... FFS...
Conditions for kies:
Need pcode, need csc and all stock components belonging to same rom, so all stock of same rom version. No root.
Never I have read kies updated a phone if with a rom for csc a, when wanting to uodating to another csc rom, bu just changing csc.
Ota can update a rooted phone as long as components again belong to one version of stock rom. Cf kernel of that rom no, the true kernel belonging to that rom with onky root yes. Ota also succeeds without pcode, most of the time.
Another condition is intact emei, which together with pcode can be secured by flashing efs backup, but you need proper backuo then.
You can midfy pcode by hex editing certain efs files, but it most of the time to tricky to achieve. You cannot edit emei that way. So make a proper efs backup
Edit: in the end efs backup and pc odin is all you need nd a safe kernel to be able to cleanse your installation should you wish to use different version and different csc. Then again changing csc triggers reset so onky change on safe kernel
Use this knowledge wisely
Sent from my GT-N7000 using Tapatalk 2
Cheers Baz,
So in effect as I'm running a stock ROM I'd need to flash the stock kernel zimage extracted from the ROM in order to update...
Or, backup everything, flash the new stock in Odin and restore my stuff...
Or finally flash GB, wipes, OTA / KIES update...
Sent from my GT-N7000 using xda app-developers app
Yeah, the first should work
Otherwise go back indeed to gb.
Note I havent figured another variable out, on one stock rom version I wsnt able to ota, but going back version earlier I was.
Not sure what it was.
In the end, just pc oding it is faster
Sent from my GT-N7000 using Tapatalk 2
Yep seems PC ODIN is the best way, just didn't wanna have to set everything back up again..
Sent from my GT-N7000 using xda app-developers app

[Q] Flashing & Upgradation of SGS I9000

Hi All,
A very good morning to all.
As the title suggests, I am requesting guidance in step by step manner. Since there is so much information that I am confused & hence creating this thread.
Below are the complete info of the phone:
Model Number: GT-I9000
Firmware Version: 2.3.6
Baseband Version: I9000DDJV7
Kernel Version: [email protected]#2
Build Number: GINGERBREAD.DDJVB
My phone is a stock phone & has been never flashed before.
As per my research, its said that I should have a custom recovery in place & Clockworkmod recovery is the one of the best. I want to install the same using ROM Manager rather than using ODIN. I have got it from Google Store. But after clicking on install/upgrade "Clockworkmod recovery" then confirming my phone model. Then when I click Flash Clockworkmod Recovery I get this error - "An error occured while flashing your recovery".
I am not using ODIN as I can't delete update.zip file from my SD Card. Hence I am avoiding that approach so that I don't have any issues with accidental deletion of update.zip.
Requesting guidance.
Regards
Sudhir
Now, I have found an app called root checker. It is giving me the below info:
SU - Not Found.
Root Access - No Access.
Please guide me on what should I do next.
Regards
Sudhir
Hey there,
So the reason why ROM manager isn't working for you is precisely the thing you discovered using Root Checker. You're not rooted, and ROM Manager needs root access to work. (ROM Manager doesn't install Clockworkmod properly either, so you may want to refrain from using that).
So you need to root your device first.
The easiest and safest way of doing this is
1.) Flashing XXJW4 using Odin (if you're unable to use Odin for whatever reason this step isn't easily done).
Then
2.) Flashing Cf-Root made for XXJW4 (the thread is in these forums) through Odin.
This will root your device and install CWM onto it, so you can flash away.
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Hey there,
So the reason why ROM manager isn't working for you is precisely the thing you discovered using Root Checker. You're not rooted, and ROM Manager needs root access to work. (ROM Manager doesn't install Clockworkmod properly either, so you may want to refrain from using that).
So you need to root your device first.
The easiest and safest way of doing this is
1.) Flashing XXJW4 using Odin (if you're unable to use Odin for whatever reason this step isn't easily done).
Then
2.) Flashing Cf-Root made for XXJW4 (the thread is in these forums) through Odin.
This will root your device and install CWM onto it, so you can flash away.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks Soryuu.. for the guidance.I wanted to know if CF-Root made for XXJW4 will work for DDJV7.
Regards
Sudhir
It may but I do not recommend it. I have done that a couple times but with xxjvk and I think xxjvo. If you gona try it do it at your own risk. Rather download the cf root for ddjv7
Hmmm, I don't think one was made for DDVJ7. Chainfire stopped making them after JW4 so a lot of newer firmwares are missing.
I wouldn't recommend trying, but you SHOULD be able to flash in a stock rom or stock kernel again should something go wrong.
But as I said, I wouldn't try it for the sake of safety.
Easier to flash XXJW4 instead because at least you know that the CF-Root made for it will obviously work
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Hmmm, I don't think one was made for DDVJ7. Chainfire stopped making them after JW4 so a lot of newer firmwares are missing.
I wouldn't recommend trying, but you SHOULD be able to flash in a stock rom or stock kernel again should something go wrong.
But as I said, I wouldn't try it for the sake of safety.
Easier to flash XXJW4 instead because at least you know that the CF-Root made for it will obviously work
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks Soryuu & Blase Zero for your time & guidance.
I got a link - http[://]cmformini[dot]blogspot[dot]in
Just wanted to know whether the procedure is so simple & straight forward....????
Can I follow the same..??
Regards
Sudhir

Categories

Resources