Related
I'm completely stock right now with the new update H7 and new to this flashing and rooting stuff. I've been reading everything and seems yall got all this down to just clicking one button and the program does the rest.
So before i try this everyone says backup backup backup soo that leads to...
1. Is there anyway to back up my phone like it is now since i haven't rooted. Just in case something goes wrong
Or
2. is the only option i have is to do the one click root thing and back up the rom then try to flash the 2.2 ?
and
3. If something goes wrong and 2.2 doesn't flash right..could i just go into recovery mode and click reinstall packages and be back to the h7 (if i don't root to back up)? or does that recovery option get deleted/overwritten when i try to flash 2.2 with odin one click?
thanks for any help
You don't really have to back up your phone. It is up to you if you have important info, games etc that you want to keep. Lots of times games were either purchased from the market so they will be attached to your profile. Use appbrain to sync your market as well. Otherwise there really is no way to do a backup unless you are rooted.
so basically i'll have to root to back up the phone at its current state? ...i'm not really worried about having to reinstall everything i've only bought beautiful widget so far but i think froyo flash deletes everything anyways right? but i just want to be able to go back to stock in case something goes wrong and the flash doesn't work or say the phone screws up and i need the warranty.
If the flash goes wrong can i go back to recover mode and hit the reinstall and will it reinstall the h7 i have now back to the phone or will that recovery option be deleted when you try to flash the 2.2?
In rom manager you have the option to back up your phone in its current state. If you get boot loops or continuous force closes you would need to use odin to flash back and do root again to load rom manager. Then you would be able to load your backup.
Sent from my SAMSUNG-SGH-I897 using XDA App
ok thanks man, ...one more thing does the one click root/unroot work just fine with the 2.1-update1 right? the h7 firmware wont make a difference when trying to root?
That should have no issues with 2.1.
My experience with JH7 to 2.2 became a huge issue when I used Master Clear....
I could not for the life of me get the phone into Recovery or Download mode using the three button press or any other combo of USB battery pulls and button presses.....ended up biting the bullet and using the SDK method which turned out to work flawlessly.......after hours of searching, googling, reading and experimenting.....
I now have two Captivates in Stock froyo mode.
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.
I've been trying to read as much as I could about loading custom roms, but I haven't found a guide that explains everything. I've gone through all the stickies but I haven't gotten a clear idea of flashing roms.
In the past, I've rooted my captivate and then downloaded the Titanium backup manager. But after wanting to go back to stock, my phone completely died using Odin to go back to JF6 and then doing an OTA update.
So before experimenting with my phone again, I want to be sure I know exactly what I'm doing. So is there a detailed guide on about using custom roms? Such as, what exactly is the update.zip file? When should I create a copy of it? What is Clockwork? If I want to revert back to stock, how do you go back to JH7 instead of JF6?
Not really, not for the level of detail you are looking for.
I'd recommend trying before you know everything . Just make sure make sure you have download mode working via the 3 button combo
Sent from my SAMSUNG-SGH-I897 using XDA App
Update.zip is what android automatically uses in recovery mode - clockwork is an update.zip that leads you into a super cool recovery mode that lets u do more.
U don't really need to mess with it.
Just install ROM manager and it will handle it
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks!! If you flash one ROM and want to switch to another, do you have to use odin to go back to stock? Or can you use a rom manager to flash a different one on?
dngen said:
Thanks!! If you flash one ROM and want to switch to another, do you have to use odin to go back to stock? Or can you use a rom manager to flash a different one on?
Click to expand...
Click to collapse
Most of the time you can do it on top, but its considered a safe measure to go back to stock. Also make sure you disable lagfix if you have one or else it will screw everything up.
joeshmoe08 said:
Most of the time you can do it on top, but its considered a safe measure to go back to stock. Also make sure you disable lagfix if you have one or else it will screw everything up.
Click to expand...
Click to collapse
If you are going back to stock, disabling lagfix isn't necessary. Everything is completely overwritten. It's only necessary if you don't go back to stock and just upgrade instead.
I'm interested in this too - First Android device and being on a tiny bit of a learning curve...
Reading through the forums here, I see the popular safety first consensus seems to be Odin back to stock, then root/ROM Manager and on with the next ROM. Fair enough, I have no problem with that, but I'd like to know the reasoning?
So lets say I try to go from my current Cog 2.1.6 (voodoo disabled) to the latest Cognition 2.4.1 beta (or any other ROM) via ROM Manager. What disasters "will" befall me? What disasters "might" befall me? Why?
You may or may not get frequent crashes if you do not flash to stock first.
Just make sure you can get into download mode. Everything else will work out
Sent from my SAMSUNG-SGH-I897 using XDA App
Alright. I have a Captivate on AT&T. It's bricked. It was one click rooted and had Perception 9.5 installed. I did the clockwork mod automatically when I rooted. I didn't use Odin. I dragged the Perception zip onto the SD. Restore mode via 3 button, install. I ran it first time no prob. I kept it for about 7 days, and I decided I wanted to try 10.1, and then if that didn't work, ROMkitchen custom.
So, I needed to go back to stock, right? I saw the Odin3 version, but on Designgear's thread, the Odin3 link was broken. So, I dl'ed the JH7_OTA.zip file, dragged to my SD, 3 button restore mode, install. WRONG! I now have a perma-AT&T screen. I don't wanna mess anything up, as I know just enough to get in trouble.
Please excuse me, as I'm sure it's been answered somewhere. I'm new from iPhone, and I know forum manners. I'm on my way out to my job, where I'll remain for the next 5 days. I only have access to an XP machine.
Please help if you can, and thanks in advance.
Find a link for a reupload of the Odin One Click, its in the thread. And then put your phone into download mode then flash.
ShredNasty said:
So, I needed to go back to stock, right? I saw the Odin3 version, but on Designgear's thread, the Odin3 link was broken. So, I dl'ed the JH7_OTA.zip file, dragged to my SD, 3 button restore mode, install. WRONG! I now have a perma-AT&T screen. I don't wanna mess anything up, as I know just enough to get in trouble.
Click to expand...
Click to collapse
No you really didn't need to go back to stock, but that's water under the bridge now. I don't know which firmware you need for your particular phone. For a batch 1009 and earlier this should be fine. For others you may need this. Personally, I'd stay away from the one-click which disables button combos on all newer builds.
K, well I feel dumb. I dl'ed Odin3, discovered "restore mode" and "download mode" aren't the same thing, put my phone in dl mode, clicked start on Odin, and was finished. Super simple back to stock.
Thaks for the help though guys. I appreciate it....
opcow said:
No you really didn't need to go back to stock, but that's water under the bridge now. I don't know which firmware you need for your particular phone. For a batch 1009 and earlier this should be fine. For others you may need this. Personally, I'd stay away from the one-click which disables button combos on all newer builds.
Click to expand...
Click to collapse
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
ShredNasty said:
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
Click to expand...
Click to collapse
If you manage to mess things up to the point you can't flash a custom ROM through recovery/CWM. Or if you need to exchange/return the phone for some reason.
ShredNasty said:
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
Click to expand...
Click to collapse
In my opinion, only if nothing else works. I went a couple of months flashing mine dozens of times without using odin. I only flashed to stock prior to sending my phone back to Samsung to see if I could get the GPS fixed/improved.
Right on man. I appreciate it. I'm learning fast. Next time I flash, I'll just flash right over P10.1....
From what I've read since joining this community is that people tend to have mixed results/opinions about flashing to stock before changing ROMS. Personally, I always do... Each Captivate out there seems to have different quirks that do odd things from time to time, and are sometimes completely random. If you have no problem simply flashing a new ROM over what your using currently... by all means. If you have problems or Force Close issues.. try going back to stock first... All depends on what you are comfortable with..
Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.