Related
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse
You may add Dopod C800 to the list
It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!
It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!
BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards
how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you
i did it with t-mobile wing usa
aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US
and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)
johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....
yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)
finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read
i hope this is where i should post this.
whilst using my phone it froze,so soft reset was done then it went into tri screen
my kaiser wont go out of tri screen.i have this on screen.
kais130 mfg
spl-1.0.olipof
cpld-8
after trying hard reset and soft reset it wont pass this screen,it loads straight back to bootloader mode.i had duttys 6.1 rom on and nikis radio.
is there a solution to this problem.all was fine until this.ive searched all over for the past week and i cant seem to find a solution,so a little help is called for.id appreciate any help if possable and thank you in advance
Are you sure that your camera-button isn't stuck? Try pushing it hard few times, and then boot again.
Try flashing an official rom onto it while on that screen?
hi tried new rom and camera button isnt stuck,it seems like theres something wrong with spl-1.0.olipof.after installing new rom it boots straight to tri screen.can olipro be tacken off.just thinking of other things to revert to normal.when soft reset done it goes straight to tri screen
Try HardSPL
Why not flash it with a different SPL - like any of the HardSPLs such as Jocks:
http://forum.xda-developers.com/showthread.php?t=396922
and then flash with a new rom, suitable to that SPL?
rgds, MN
Fyi, this issue is being discussed in lots of threads @ ROM Development... I do have the same problem.
http://forum.xda-developers.com/showthread.php?t=402562
http://forum.xda-developers.com/showthread.php?t=371154&page=9
... and this one being the most recently updated:
http://forum.xda-developers.com/showthread.php?t=393337&page=29
Just to point out that the problem is solved (I think) - read here -> http://forum.xda-developers.com/showthread.php?p=2415437#post2415437
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?
i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore
can somebody help me I just wanna know how i set back to standard rom or what you call it
the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers
yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..
i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading
Has this been resolved? Or do you still require help?
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip
k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?
it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S
..........
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
go to olinex hard spl section and write about your problem maby they can help u
Onlinex hard spl section?
I must be blind. Where is that?
matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here
matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.
Tried both checked and unchecked and dont work
I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS
Great!!! I will remember that one too.