i use a ruu upgraete to p3600i rom ,
but i get a message
Error[332]
Flash Type Error
image to be update is NAND 128,the target device is 256
i tryed HxD chenge first read 01 , 04 but the question not solve..
whit one help me ?..
Related
Hi, I flashing my friends Mteor from ROM 5.2.19593 (Build 19593.1.1.7) 1.038 to 1.044 and flashing crashed. Now working only switch to boot loader. I checked flash more rom from SD card, but finished on NOT ALLOW. It's problem nocompatibile SPL.
Now is boot with version
BREE100 IPL-1.0
BREE100 SPL-1.10.0000
I have second Breeze with working ROM 5.2.19593 (Build 19593.1.1.7) 1.044
Can you help me:
I need find new ROM compatibilite with SSPL-1.10.0000
or some program or some way for switch to SSPL-7.77 from SD_card or PC
or some way from full backup form my Mteor anf restore to second Mteor.
Can i use program and adress from HTC Wing? I don't know prosses for restore it.
REM This creates a backup of your current SPL
mkdir 1
REM cecopy SurrealNetworksAppUnlock.cab dev:\
REM prun SurrealNetworksAppUnlock.cab
pmemdump -a 0x8C000000 0x40000 1\spl-backup.nb
echo "spl-backup.nb written to subdirectory 1"
pause "press return to exit"
REPAIRED
It's possiblle flashing SSPL 1.10.000 by Russia original flash QTEK_A07 from http://wiki.xda-developers.com/index.php?pagename=Breeze_Upgrades
next time i flashed hardSPL 7.77
next time i flashed new ROM from.
can someone help me please when i have download a new rom or radio and go open up the ruu file to run the process, i get the error 208 messege anyone knows wot this means thanks.
read the topics, see trinity guides!
http://forum.xda-developers.com/showthread.php?t=298640
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
Long Story Short (you can read below to see the progress):
PROBLEM SOLVED, you can use the 1 click method shown here http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/ but you need to use the LATEST FLASHREC you can find here http://zenthought.org/content/project/flashrec, and from the flashing on everything is nice and dandy! my phone still has the ORANGE logo but I will have to wait a few minutes for it to boot. I am so excited!
HOPE IT HELPS PEOPLE!
I am trying to root my Continental European G1 with this guide
(being continental european I can ONLY use the GOLDCARD tutorial? )
http://forum.xda-developers.com/showthread.php?t=547557.
1. I enter the command into terminal emulator and it outputted this:
2842454c455841521000001ed8009368 that looks like this
28 42 45 4c 45 58 41 52 10 00 00 1e d8 00 93 68 which transforms into this
009300d81e000010524158454c454228
2. I send an email to that address, the goldcard.img came attached.
3. I open HxD Hex Ed, open the goldcard image(located on SDCARD removable disk), copy the hexadecimal code, then I open the REMOVABLE DISK with readonly unchecked, (up that list there is also my partitions names, in this case SDCARD, but I modified the removable disk, as it is stated in the guide). I paste the code copied earlier from 000000 to 000170, I hit SAVE, everything savy so far.
Pictures Uploaded below
4. Read below, my phone is DREA20000, I download RC7 DREAIMG.nbh, update.zip and recovery.img and copy them all in the ROOT of my SD card.
- now copy dreaming.nbh to the root off your memorycard.(RC7) <-- RC7 works best for DREA110
Click to expand...
Click to collapse
,from the global root guide
Restart Phone with Camera Button (step 2) pushed, I enter the update console, I push action to start the update and I still get
MAIN VERSION OLDER, UPDATE FAIL, REBOOT or POWER OFF
Here is the link to a little movie with HBOOT FAILING GRACIOUSLY http://www.vimeo.com/7015908 (it will be available in 35 minute, now is 2:41AM, GMT+2 Eastern Time)
And this is the 1 click method not working http://www.vimeo.com/7016334
----------------------------------------FROM HERE I STARTED, ABOVE IS THE UPDATE PROGRESS
Hello, since this morning I am trying to flash my phone cyanogenMOD firmware.
My G1 has the following specs:
DREAM PVT 32B SHIP S-ON
HBOOT-1.38.0000 (DREA20000)
CPLD-4
RADIO-2.22.16.19
28 February 2009
Model Number: HTC_Dream
Firmware: 1.1
Baseband version: 62.41S.20.13U_2.22.16.19
Kernel Version: 2.6.25-deb9915c
[email protected] #11
Build number: 1.56.73.2 PLAT-1.0_gms-135348 CL#11526 release keys
Does anyone has an idea, a tip, anything to flash my phone.
THANKS, Arthur.
did you try rooting with the goldcard method?
search for it
Thanks,
I can't find an older version of the QMat, the latest version is free, but to use the HTC Goldcard you need to pay 20Euros
EDIT
i found an older version of QMat, but it won't generate the img for my SD card(picture attached).
It's a LEXAR 8GB SD with the CID:
00510009531f4003424d3832314e4918
Could someone please generate a image file for me, or do I have to buy another model of SD card?
http://forum.xda-developers.com/showthread.php?t=547557
i dont think this method requires QMAT
also, you should stop at where it says "FOR THE HERO ROMS"
because you could potentially brick your phone if you do the steps after that wrong
you should be fine with the hardSPL so stick with that till you feel your ready to upgrade ( i didnt upgrade till a month ago lol and my phones been rooted since may XD)
EDIT: if you can find the 1.5 cupcake update for your provider, you can flash that and try to use the one click method if none of the above works
Thanks a lot, I'm gonna start reading! and hopefully achieving smt ). I've got a big project to work on and the curiosity eats me to root my G1 ). Everything but working onthe project )
EDIT: Apparently the phone won't take RC7, because i quote my smartphone "Main version is older". What can I do?
What are the steps?
Newer DREAIMG.nbh which is root-ed?
Another way to install the recovery image so that I can flash everything from the recovery console?
Since people are starting to have problems with their SEX1, I think its gonna be usefull to have this thread as a reference for fixing bad flashs and corrupted memory.
The method to connect with MTTY are the same for all phones so please refer to this thread to PREPARE your computer :
HTML:
http://forum.xda-developers.com/showthread.php?t=540290
However, the commands for the xperia are slightly different.
Once your in MTTY and Connected :
Press enter first to get prompt (Will Show as CMD)
---------------------
MTTY OUTPUT:
---------------------
CMD>
---------------------
type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
---------------------
MTTY OUTPUT:
---------------------
CMD>set 14 0
HTCST ÚÈHTCEUSB>
---------------------
type "task 28 55aa" to get your device formatted:
---------------------
MTTY OUTPUT:
---------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321 YOU WONT SEE THIS LINE IF YOU JUST TYPED TASK 28. YOU MUST TYPE TASK 28 55aa OR IT WONT ERASE EVERYTHING.
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 1337 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end This part is just copied from the diamond thread so it might be a lil different with xperia. The important thing is to see the FILL RSVD line.
Cmd>
---------------------
type "task 8" to ask your device reboot:
---------------------
MTTY OUTPUT:
---------------------
Cmd>task 8
Cmd>
---------------------
Immediately DISCONNECT your phone
et voila!
If somebody know how to extract info's from the xperia bootloader, maybe we can know what other tasks could be usefull.
I think this should work for most people.
maybe you can also provide working mtty software and usb driver? thanks for the thread.
This should be sticky!
Thanks for writing the info, it is very good.
The working drivers are in the thread that is linked to in the first post!
http://forum.xda-developers.com/showthread.php?t=540290
You MUST flash a Stock ROM after this process! (i think, flashing a custom ROM failed for me)
help!! to bootloader mode
when im trying to enter bootloader mode it detects kovsimg.nbh(any rom that has been copied to root of the card) ...it asks "Press power button to start update image"
how can i stay at tricolor mode to run mtty? shouldn't i copy kovsimg.nbh to root of the card? help
remove your card
done
Jonny4911 said:
You MUST flash a Stock ROM after this process! (i think, flashing a custom ROM failed for me)
Click to expand...
Click to collapse
You don't have to flash a stock rom.
Flashing a custom rom will also work. It will just format your phone and after that rewrite the flash so doesn't matter if it's a stock or custom rom
Jonny4911 said:
remove your card
done
Click to expand...
Click to collapse
thank you..did it..successful
i can see fill rsvd after type 2855aa
i can see nothing after type task 29
and the system still exists after mtty
what problem ?
simpleguy said:
i can see fill rsvd after type 2855aa
i can see nothing after type task 29
and the system still exists after mtty
what problem ?
Click to expand...
Click to collapse
There is no problem.
The system will reinstall itself but any remaining information ( bad sectors ) from previous flash will be remove.
Your rom wont have any problems.
NOTE : Task 29 is NOT for XPERIA
after disconnect ????
all run ok with me
but what i should do after disconnect my phone, how can i do these step
((7: Immediately DISCONNECT your device and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash
8: After ROM flash Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.))
thank you 8)
Installing rom using Miflash gives me an error remote size too big
when i try to flash it manually using fastboot in cmd there also i get this error remote : size too big
I messed up with system 1 partition
help plz
I cant install Rom using fastbot or Miflash