Database Develop

i9000m inaccessible. Internal SD?

I have an i9000m with 2.1 and voodoo. I decided to upgrade to the JK3 firmware today when this happened. I backed up data, did a factory reset, removed the sim and flashed JK3 through Odin. Booted up fine, but when I try to run any app it force-closed.
So i powered down and tried to flash back to JH2. Got into Download Mode and flashed it, upon reboot i got this error
E:Cant mount /dev/block/mmcblk0p1
(no such file or directory}
e:copy_dbdata_media:Cant mount SDCARD:
copy default media content failed
Tried a flash to JG8 and still the same thing. If I make it boot it goes to the Galaxy S animation and just hangs. The touch sensitive buttons light up, nothing on the screen.
I can still get into Download mode, but recovery mode gives me this
update media, please wait
E:Cant mount /dev/block/mmcblk0p1
(IO Error)
e:copy_dbdata_media:Cant mount SDCARD:
copy default media content failed
Advice? Internal SD dead?

ap27 said:
I have an i9000m with 2.1 and voodoo. I decided to upgrade to the JK3 firmware today when this happened. I backed up data, did a factory reset, removed the sim and flashed JK3 through Odin. Booted up fine, but when I try to run any app it force-closed.
So i powered down and tried to flash back to JH2. Got into Download Mode and flashed it, upon reboot i got this error
E:Cant mount /dev/block/mmcblk0p1
(no such file or directory}
e:copy_dbdata_media:Cant mount SDCARD:
copy default media content failed
Tried a flash to JG8 and still the same thing. If I make it boot it goes to the Galaxy S animation and just hangs. The touch sensitive buttons light up, nothing on the screen.
I can still get into Download mode, but recovery mode gives me this
update media, please wait
E:Cant mount /dev/block/mmcblk0p1
(IO Error)
e:copy_dbdata_media:Cant mount SDCARD:
copy default media content failed
Advice? Internal SD dead?
Click to expand...
Click to collapse
Hi. First question is... Did you disable the voodo lagfix before you flashed? This is a MUST when flashing and you diddnt mention it in your post.
The bad news is I believe that your internal SD card is toast and it will need to be sent in for repair. Sorry to be the bearrer of bad news...

Thanks for the reply!
Yea I disabled voodoo but I forgot to unroot it. I'm not sure if thats necessary.
I was beginning to think so. I'll take it back then

well the next best thing to try is to flash back to a stock ROM like JH2 and see if you are able to revive the internal SD
if not, then it's a visit to a Bell Store for repairs

Tried both JH2 and JG8, no revival so far.
Repairs it is i guess.
Btw, your sig exactly describes my SGS before I tried flashing JK3 on it, well besides the fact that i used voodoo! I guess I'd advise you to not flash it right now

I don't understand why so many seem to have issues with JK3. I find it to be a great ROM that has better performance than JH2. Many seem to have issues right after flashing JK3 so I'm thinking it has something to do with with how it's being flashed.
I haven't had any issues flashing and I don't know if it's because of the process I use or what. I've been using Odin 1.7 and never re-partition.
This is how I do it:
- unroot phone
- remove external SD and SIM
- wipe/factory reset
- flash with Odin, no pit, only 'auto reboot' checked
- fully boot up phone then shut down
- wipe/factory reset again
- insert external SD and SIM
- set the phone back up like i would a new device
I like to have my phone completely back to stock before flashing another ROM, especially if it's an upgrade from a previous ROM. I haven't had any problems from flashing but maybe I've just been lucky

dm-digital said:
I don't understand why so many seem to have issues with JK3. I find it to be a great ROM that has better performance than JH2. Many seem to have issues right after flashing JK3 so I'm thinking it has something to do with with how it's being flashed.
I haven't had any issues flashing and I don't know if it's because of the process I use or what. I've been using Odin 1.7 and never re-partition.
This is how I do it:
- unroot phone
- remove external SD and SIM
- wipe/factory reset
- flash with Odin, no pit, only 'auto reboot' checked
- fully boot up phone then shut down
- wipe/factory reset again
- insert external SD and SIM
- set the phone back up like i would a new device
I like to have my phone completely back to stock before flashing another ROM, especially if it's an upgrade from a previous ROM. I haven't had any problems from flashing but maybe I've just been lucky
Click to expand...
Click to collapse
Hey...looks like you use the I9000m version. I have some questions-
1.Have you tried flashing back to stock from darky's ROM or any other ROM?
2.If yes could you tell me if it's the above procedure you used or anything more?
3.Also, did you unroot your phone when on CF Root? How did you do it? (oneclick?)

Black screen, vibrating in a pattern

Hey guys and gals,
I think I bricked my phone and I'm assuming that it's the internal sd card that failed... My phone boots through the i9000m boot screen and does the S loading screen but then turns black and the phone starts to vibrate in a pattern. I do have download mode and have flashed using Odin (Re-Partition, 512 pit) with stock JK3 firmware.
The phone was acting up last night with some force closes and running slower than usual, and today I was opening settings and it would go to a black screen with no response, so I restarted and this is where I'm at. I was using Doc's Bell v1.1 Rom.
Should I try flashing Odin again?
Update: I tried flashing stock JK3 again and made it to system recovery (3e)
Below the options of:
Reboot
apply sdcard:update.zip
wipe... blah blah
-------------------------
]update media, please wait
E: Can't mount /dev/black/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet. please use UI me nu for format and reboot actions.
copy default media content failed

You need to flash with 803pit. N the vibrating patter is the force close pattern. Flash eith 803 n u shud be good
Sent from my GT-I9000 using XDA App

That did not work for me btw Im tried flashing with I9000XXJPY|2.2.1|2010 December|
From here: http://forum.xda-developers.com/showthread.php?t=846913
Initially I did it without the PIT file, searched for a thread regarding the same issue as the original posted to find this thread with the solution you mentioned however same problem.

Hi, you need to flash back to JM8, to restore your dbdata partition. Then flash to any other rom.
Cheers

Same for me
Hi,
Times ago I flash with odin but I forgot to remove RyanZA's OCLF before flashing,
symptomes: system start with "S" logo samsung and after a while screen goes dark
and intermitent vibrate.
Solution was:
- go to recovery mode
- wipe data/factory reset
- wipe cache partition
(I don't remember if only 1 is enough)
Hope it help,
Laurent.

[Q] Installed MIUI MCG 5.2. Stuck in Boot Loop

Hello,
I installed MIUI MCG 5.2 by following the guide by rahulrulez.
After installing the zip from sdcard (in recovery), the phone seems to be stuck in a boot loop. I get to the MIUI logo and after a few seconds, the phone seems to give a small haptic kind feedback, the screen blinks and the boot animation starts up again. I tried reinstalling the zip from recovery but its still the same.
I think I must also mention that after flashing the "Froyo-full-pda" and reboot, the phone did not boot into android directly but instead into 3e recovery where it displayed some message about sdcard. I ignored that and rebooted and it went into froyo. After that I flashed the cm7 initial kernel and then installed MIUI through recovery.

This is the message I get after installing 'Froyo-full-pda' after the part where it formats cache:
-- Appling Multi-CSC...
Installing Multi-CSC
multicsc : src /system/csc/KOR/system
Install default apk-files. please wait
E:Can't mount /dev/block/mmcblk0p2
(Invalid argument)
E:copy_data_default_apk:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
-----------------
If I select reboot after this, it boots into Froyo fine. Are these messages related to the boot loop? I do not think so as I'm able to flash cm7-initial kernel and go into cwm recovery after this.
What is mmcblkp02? Does it expect a second partition on the internal sd? Or does is that device supposed to be the external sd card (I dont have one)?
After posting the message above, I tried reinstalling froyo-full-pda in order to go back to froyo but after flashing I got the above messages again. Now my phone doesn't boot up. The back lights glow and it seems to pulse again and again. Help please!

Can't give you an answer as to what is wrong exactly but I'd recommend following itskapil guide while flashing it. More specifically, I recommend flashing EZRom first to make sure you have a copy of Froyo on it before flashing MIUI.
Hope this helps

lots of people had / have bootloops with the latest release.
what i did is:
Format System
Format Cache
Run Kernel Cleaning Script
Flash Glitch V10 kernel
Install MIUI V4.X - Then Flash V5.X over that.
lots of people have done it this way, and not suffered from bootloops
hope this helps, The above post is also a good fix

Thanks for the replies guys. Luckily I'm able to get to the download mode and cwm recovery (it has speedmod on it). As I was coming from Darky 10, I had all filesystems to ext4. I flashed froyo-full-pda without disabling lagfixes. As it threw an error about mounting, I disabled lagfixes and flashed froyo-full-pda again. This time it doesn't give me those errors however, it still doesn't get past the samsung logo on boot up. After the samsung logo, the screen goes blank, the button lights light up and the phone vibrates at 5 second intervals.
Will need to try EZRom to make sure I can get to froyo atleast

yeah, its not the end of the world,
you need to flash with pit and re-partition if you forget the lagfix
you will be up and running in no time

Fixed!
Flashing EZRom fixed it! Yay! Now I'm on MIUI! It's great but it drinks battery like crazy! Man I wish them devs find a fix for this soon. Will buy everyone a beer! Cheers

Need help with SGS Looping Issues

Essentially I am at a lost of what to do.
I have tried everything to no prevail which leads to me to my defeat post here for a cry for help.
I DO NOT believe I have bricked it yet because I can still get into download mode and CVM but it doesn't look like this image: http://blog.laptopmag.com/wpress/wp.../Clockwork-Mod-Boot-Screen-e1279545586372.jpg
which is what I wanted. My original plan was to install a new ROM however, I do not have that option "install zip from sdcard". Therefore I had to install the Speedmod Kernel which is why
ANYWAYS moving on, I have tried Heimdall and Odin. I have been able to bootup the phone. HOWEVER it doesn't load a ROM because the Samsung Galaxy GT i9000 logo just keeps looping. Like I said, I am able to get into Download mode and CVM with the new menu. However, when I click anything the screen goes blank and nothing happens. I am at a complete loss of what to do. I have tried everything and I'm looking to advice.
Thanks and hope to hear from you all.

If I remember correctly the Speedmod Kernel uses the power button to select options and if you click the home button the screen will go black.
If this is not the issue then reverting to a stock Rom is probably your best option.
Find a stock Rom at: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa (this link is for international version) just select your country. from the links just above Firmwares for GT-I9000 .
From here you want to get a pit 512 & make sure you have a firmware with 3 files (PDA, Phone, CSC) . From here there are plenty tutorials on how to install a stock ROM.
If your issue is not pressing the wrong button in speedmod let me know and I'll be happy to provide a basic list of what to do... or provide a link.

Thanks for the quick reply, I have done that. I have installed the best one I could find: I9000XXJVQ
I put the following 4 files in Odin:
s1_odin_20100512 (PIT)
CODE (PDA)
CSC (CSC)
MODEM (PHONE)
It brings me to Android system recover <3e>. From there I'm at a lost at what to do. I see when it says
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
From there I do not know what to do. When I click reboot system now; nothing occurs, the SGS image at the beginning still continues to loop. I'm looking at how to install the CVM so I can install my custom ROM.
I believe in the past I managed to do it (I installed the Dark Knight mod; but when it booted it said Encryption Unsuccessful and it only happened once. Was never able to get past that screen).
Anyways, that's the instruction from what I did above. What next (It's still looping at the SGS text at the startup).
EDIT:
From this post: http://forum.xda-developers.com/showpost.php?p=9336821&postcount=2
I then followed the install instructions for Root XXJVQ
The thing installed, it still has the issues. Opens the SGS start screen and doesn't go anywhere.
Further EDIT:
I then restarted the phone with following combination. (Power + Vol Up + Home). It then launched in CVM. I cleared partition and cache. I then installed the .zip ROM file (http://forum.xda-developers.com/showthread.php?t=1510940&highlight=cyanogen) from SD card. Rebooted system. It launches. Says "Encryption Unsuccessful" Please restart phone. I click the restart phone button. It restarts, I then get the android looking icon dead on the ground with it's chest open with a "Red triangle !" above it. Stuck from here.

Wish I could help further. In my experience I had to flash stock twice. Once with with pit file and repartition selected. Once without pit file and repartition unchecked.
From there to flash a custom ROM you need to get rid of 3e recovery by flashing something like CF-roof. Then once you have cf-root you can instal custom ROM.
Here is link for cf-root
http://forum.xda-developers.com/showthread.php?p=8238938
Sent from my GT-P7500 using xda premium

I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?

Unfortunately that is the end of what I know still fairly new to all this. Hourly someone else can help.
Sent from my GT-P7500 using xda premium

Dorianking said:
I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?
Click to expand...
Click to collapse
HOw long did it take for the ROM to install?
Have you tried removing the battery, battery back in recovery and reflash the ROM.
ICSSGS 4.2 has a requirement to be flashed twice. (different rom but may be similar issue)
Once to update the bootloader which will result in a boot loop when coming from a Gingerbread ROM and again to fully install the rom
Lastly download the ROM again checking the MD5 checksum before flashing
I trust that this will assist

Does it matter if it is installed from the External SD or Internal SD because when I try to install from the internal SD it says "Can't mount /emmc/" so I'm only able to install from the external SD.
I tried installing it twice. I still get the encryption unsuccessful screen. I also re-downloaded the ROM.

OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
If you have been able to do this before i would suggest to try a different ROM.
I can personally recomend the ICSSGS 4.2 ROM following the instructions on the opening post for that ROM
If this works then try Dark Knight or other ROM
If this post has helped please use the Thanks Button

Lexrsk said:
OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
Click to expand...
Click to collapse
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.

so what you are saying is that no matter what firmware you flash it will boot loop?
I personally would not be trying a ICS ROM until you can boot a gingerbread rom successfully.
I have personally softbricked my phone once where i then was able to get into 3BR but was unable to boot due to a bad flash reflashing a gingerbread rom a couple of times with odin worked for me.
Try reflashing your JVU rom 2 times in a row.
I assume that you are able to get into 3BR if so what happens if you try to mount /system is there a error message?
When the phone is boot looping what is displayed on the screen?

Dorianking said:
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.
Click to expand...
Click to collapse
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium

So your suggestion is to keep doing JVU flashing until I can get it to work? Do I just follow that instruction and do the flash once with the PIT file (and repartition) and do it again without the PIT file? If it still doesn't boot, what then?
The phone boot looping. RIGHT when you turn on the phone. It has that Samsung Galaxy I9000 screen. It just has that, goes black for like 2-3 seconds then resets itself over and over again.
There is no issue with mount /system. I believe when I try to mount /emmc, there is an error. This is important because this is what lets me access the internal SD.

scubadude said:
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
After step number 1, I get this in the Android system recover <3e>
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
I proceed to step 2. It doesn't boot so I do the 3BR.
I do step number 3, but step number 4 doesn't happen; I tried what you just said and it won't boot into the stock. It just goes into Android system recovery <3e> and the copying media files fails (both times I flash it). Just an error, still can reboot system and etc but I don't think anything happens.
This error on the second flash is
Code:
E:failed to mount /sdcard (file exists)
E: copy_dbdata_media: Can't mount /sdcard your storage not prepared yet. Please use UI menu for format and reboot actions.
Media files copy failed
#MANUAL MODE#
-- Applying Mutli-CSC...
Installing Multi-CSC
Can't acces to '/system/csc/BMC/system/'
Successfully applied multi-CSC.
Click Reboot Now is <3e>. Nothing happens, it boots up. Shows the first Samsung Galaxy S screen, does nothing. About to boot stock ROM but doesn't. Loops it back to the SGS screen once more. Then it just shuts off and a picture of a battery shows up?

If you are flashing through Odin twice all three files 1st time with pit and repartition checked, second time without pit and repartition unchecked and still have issues then I would say problem may be with phone but I am new to this myself. Only commenting and given suggestions as I had similar issues which I resolved with steps I mentioned.
Options would be to download another stock ROM and do a checksum to ensure it is fine, download a different version of Odin (i use odin 1.85) and a new 512 pit file, reinstall the drivers for the phone, try it all on a different PC. Also make sure kies is not running when you do this (kill any background services.for kies) and try disable your antivirus on your PC. Also remove external as card and Sim.
If these suggestions don't help try search google for those errors you are getting. That's what I have done and managed to sort every issue so far.
Sent from my GT-P7500 using xda premium

Ok lots of reading in past posts here's what I would do and it works everytime. Google links to xxjvu firmware and and use those three files plus pit 512 repartition checkedand flash. Then to root your phone simply go to darky website. But before you do any of that tell me what rom you were on before you flashed new kernel and what exactly were you trying to accomplish out of your phone. ie.end result and who your service provider is. If you pm me I can walk you through it no problem.
Sent from my GT-I9000 using Tapatalk

It was 2.3.3 I believe before I did it.
My goal is to put a nice custom ROM (looking towards Dark Knight 3).
I have no idea what the specific darky rom I need.
Service provider was Virgin Canada.

Been thinking. Have you tried using heimdal. Try search for a tutorial that flashes a stock ROM with heimdal.
Sent from my GT-P7500 using xda premium

What did you have before the problems? Was it a lagfixed rom with ext4 partitions?
I've had strange problems when I tried to flash stuff with a lagfix, try to flash your stock base, and then flash a kernel that supports ext4. See if it boots up. If it does, disable lagfix and then change to whatever you want

[Q] failed to mount /sdcard error

hi guys
this is my first post on this kickass site and i hope that someone can help me with this rather strange error :victory:
as the subject of topic says , i get this error whenever i boot my friends sgs into recovery as normal booting goes on loop forever.
this is the error i get in the recovery of stock I9000XXJVU:
----------------------------------------------------------------------------------------
--Copying media files...
E:failed to mount /sdcard (file exists)
E:copy_dbdata_media:can't mount /sdcard
your storage not prepared yet,please use UI menu for format and reboot actions
media files copy failed
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/TRA/system/'.
Successfully applied multi-CSC
----------------------------------------------------------------------------------------
what happened is this:
my friend had a sgs and i wanted to flash it with cyanogenmod 10 (android 4.1)
the stock firmware was 2.2 iirc.
i just rooted the stock and flashed the 4.1
it went ok but i saw the mounting error back then sometime that i rebooted the device with 4.1 on it but didn't get that error all the time and it would boot just fine.
then the error popuped more and more.
so i decided to flash stock 2.3.6 ,rooting it and finaly go back to 4.1.
after i flashed the device using I9000XXJVU it goes on loop.
recovery and downloading mode works.but the recovery give me that error i said above.
i guess a hardware issue but i don't know for sure
i'm lost here :silly:
help me plz
Thanks in advance

Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937

Donovan662 said:
Hi flash this http://db.tt/T8ZpfTPa in pda section in odin
Then see & follow my last post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Click to expand...
Click to collapse
thanks for the reply.
i did what you said and its still in loop and same error in recover.
why my internal sdcard isn't mountable?can it be hardware failure?

Same errors?

Donovan662 said:
Same errors?
Click to expand...
Click to collapse
yep same error as before.
after flashing is done and it want to install the package,it get stock and give me that mounting error.
i just want to know if this problem is software or hardware

I also had this problem. Was on stock JVT with semaphore, partitions converted to ext4.
I decided to reboot my phone for no particular reason (was working reat) and when i powered it on kept boot looping without really getting past the samsung gt-i9000 white letters / black background screen.
CWM recovery said it was unable to mount any partition. External SD mounted fine, just nothing from the internel sd. No system, data, whatever. Got me thinking i may had my internal sd malfunctioning.
I just flashed it with odin and my stock branded operator rom (2.3.3) and done nothing more. No repartition. Working great. Was probably some ext4 error.
Before that i had been using cyanogen stable. Started giving FC like mad, so i flashed that stock JVT. On hindsight it may only had been the data partition that had run out of free space but i had no way of knowing when it happened and needed my phone running.
Reflashing got mine running again. Maybe try with Heimdall if odin's not working for you? Be sure to get a complete rom, with bootloaders and such. I'd suggest your operator's stock one. That way you can also send it back to samsung if it still doesn't work.
Click to expand...
Click to collapse
Found this post somewhere in the xda forum, it helped many people having the same problem as yours, hope it helps you !!!!

http://forum.xda-developers.com/showthread.php?t=1841250
See problem 11 exact same problem described

thanks for the help guys
i tried everything that came to my mine and used this topic for my errors but still get errors
problem 11 and 12 are the ones i get flashing different roms
even tried a Rescue kit from here but no go...
why this is happening to me?

the failed to mount as i have come to understand is internal SD card failure you will have to give external SD card a try
Check this thread
http://forum.xda-developers.com/showthread.php?t=2059098&page=2

file moved or deleted
hi friend, file link not working file moved or deleted........