Database Develop

xda/tomtom/gps problem

I need help too...
I have Tom Tom on mmc card but my Gps receiver wont connect. I always get 'no gps device' message although my device is connected. the red light begins by flashing but then stays on constant. (is this relevant?).
My incoming beams box is already unchecked.
I have XDA 2i and would like exact step by step instructions how to get my GPS to work... (I'm a new user - it took me one hour to set a song as my ring tone - so imagine how long this is taking!) I feel like I have tried absolutely everything and its really starting to drive me crazy. All I want is sat nav.
Thanks.....

XDAIIi GPS problem
Chicken,
what version of TT are u using?
what gps receiver?
If it's TT3.x, 4.x, or 5.x (don't know v6 yet), first you'll need to pair your receiver with your XDA. Go to Bluetooth Manager->Tools->Paired Devices. Here (if it's not there already) tap on Add and then tap on search icon (next to Device: field). It will search for any bluetoothdevices in range. Once it finds your GPS receiver, enter the passkey (provided with the receiver, usually 0000) and tap ok. The GPS receiver should be installed.
Start TT, go to Change Preferences and browse to Show GPS Status. Here, tap on Configure, choose your GPS device (I guess it will be Other Bluetooth GPS), click on Select (if prompted for pairing the GPS with PDA just tap on Continue) and choose the port. It'll be one of the bluetooth serial ports (it's COM6 in my case). Make sure that the receiver is still on and bluetooth active and watch the GPS status. If there is No GPS device! message on the top go back to configuration and change to another port.
If still no luck go to your XDA Start->Settings->Connections->Beam, make sure the Receive all incoming beams is not selected. If still no joy, you'll need to test all the connections, check if you can 'see' the receiver with another bluetooth device ez mobile phone, than do the same with your PDA. You can also reset the GPS receiver (check the manual), you can also do it by removing the battery from it and leave it like this overnight...
Good luck!

can you recommend a good GPS receiver?
Hi Robsonix.
Thanks for your reply. I got stuck at the first stage though - but was relieved to find out I'm not a complete dummy as this is what I had already tried - but failed. I cannot get my GPS to pair up with my bluetooth. My phone cannot find it.
I bought my receiver on Ebay. its just a wire thing that connects through my cig lighter to my phone. It didnt come with any instructions!! I think its a little dodgy. Can you recommend a proper one?
I'm not sure what tom tom it is, I think 5?? But actually I havent a clue.
I cant check if the receiver works with another phone as it only has connections for the xda 2i.
Thanks for your help - I hope u can help me some more.....
any recommendations??
Chiken
ha ha. Never mind - I think I've found the problem. I'm such a thicko!! It takes two to tango right? I'm such a thicko...

Port Numbers
chiken said:
I need help too...
I have Tom Tom on mmc card but my Gps receiver wont connect. I always get 'no gps device' message although my device is connected. the red light begins by flashing but then stays on constant. (is this relevant?).
My incoming beams box is already unchecked.
I have XDA 2i and would like exact step by step instructions how to get my GPS to work... (I'm a new user - it took me one hour to set a song as my ring tone - so imagine how long this is taking!) I feel like I have tried absolutely everything and its really starting to drive me crazy. All I want is sat nav.
Thanks.....
Click to expand...
Click to collapse
Do you select the correct port number to match your gps port number in the gps setup in TomTom?
DAz

SPV 1500 "Alpine" TT5 with GPS receiver
I've just joined this Forus following the aquisition of an Orange SPV which is now unlocked to run on T-Mobile. I have also used an MDA Compact II (Charmer?) successfully for the past year.
Like this current thread originator "chicken" (and no doubt many others) have had difficulty running my Holox BT-321 BT sat receiver with TT5. It pairs OK, but I TT5 cannot "see" the device, even though I have selected just about every Com device available.
I recently bought a wired sat receiver (just like chicken did), and thought this would work better. However, TT5 will not see this device either!
Can someone tell me how I can check which Com port is active on the PDA, or check if there is an input stream coming in from the sat receiver?
This is getting bloody frustrating now. My old Nokia 6600's worked first time out of the box!
Thanks
Peter (with the Aprilia Falco 1000)

How to connect to a BT device (GPS)

Hey Guys,
it seems a bit like a stupid question (and maybe it is) but how do a actually connect my s730 to a ... lets say GPS Bluetooth receiver?
I read the manual ... I got the two devices paired.
Everythings fine. Until it says that I am connected to the receiver. The problem is, I am not. At least the receiver says so.
Until last week a had a Asus P525 (WM5 PPC). It was no problem to get a connetion. I paired the devices ONCE, activated BT and chose connect on the paired device everytime I needed it. Unlike WM5 PPC there is nothing like "connect now" anywhere. It seems like I have to re-pair the devices everytime. But that can't be right.
Thanks in advance,
Samuel

With some GPS programs, after you have paired, you need to create a com port over the connection. Did you do this?
With Tomtom 5.2, you do not need that. It just finds the device as soon as it is paired.
Hope that helps

I have TomTom 6 installed. And it says that I have to connect the device. On my WM5 PPC I used Navigon MobileNavigator 6 and had no problems at all. MN|6 found the device itself. Maybe its TomTom which causes the problems.

Sorry I can't help. Since I learned that TT6 was not suported on smartphones, I gave up any plan on upgrading. 5.2 is enough for me.

SamuelTee said:
I have TomTom 6 installed. And it says that I have to connect the device. On my WM5 PPC I used Navigon MobileNavigator 6 and had no problems at all. MN|6 found the device itself. Maybe its TomTom which causes the problems.
Click to expand...
Click to collapse
Did you disable Bluetooth explorer?

@phailo
Yes, it is disabled. I tried Efficasoft's GPS Utilities and these CAN connect to the receiver ... and get a lock.
What bothers me, is that there seems to be no real bluetoth manager on the s730. It would be great to get the Broadcom Bluetooth Manager to work.

Bluetooth GPS pairing help.

Wanted to post this in the actual development thread but can't due to post count. so here goes. I've been using the recently posted CM7 rom with bluetooth working. I've got no problem with turning the bluetooth on, and can even pair it with my Fascinate, although it says it's paired but not connected. I want to be able to pair it with my Fascinate and use the GPS from it, but so far Bluetooth GPS Provider just tells me there is a problem with the GPS and to restart it and try again. Am I wrong in thinking this should work? Do I need a completely separate bluetooth capable GPS?

clak84 said:
Wanted to post this in the actual development thread but can't due to post count. so here goes. I've been using the recently posted CM7 rom with bluetooth working. I've got no problem with turning the bluetooth on, and can even pair it with my Fascinate, although it says it's paired but not connected. I want to be able to pair it with my Fascinate and use the GPS from it, but so far Bluetooth GPS Provider just tells me there is a problem with the GPS and to restart it and try again. Am I wrong in thinking this should work? Do I need a completely separate bluetooth capable GPS?
Click to expand...
Click to collapse
Android doesn't support Bluetooth GPS directly. http://www.appbrain.com/app/bluetooth-gps-provider/de.mobilej.btgps

Per my original post, I'm already using that application, and it only tells me there is a problem and to restart the gps.

I cant even get BT to turn on for more then 2 sec with CM7 17,18 havent tried 19
Ive cleared the Cash and powered off by holding the power button, powered off from CM7, tried with wifi on/off cant seem to get it to work any suggestions?

I don't know, turning it on worked after a simple restart, I just can't get it to connect properly apparently.

I got Bluetooth GPS Provider to connect to my Holux GPSlim240. GoogleMaps is using the GPS signal perfectly. I also get the occasional restart msg but I think its the bluetooth moving out of its 2 to 3 foot range. Menu settings on Bluetooth GPS also seem weird. The GPSlim is a SiRF but when selecting that it seems to fail more. Used "other" in GPS type.

GPS help, please

OK, here is the problem.....
I got CoPilot GPS installed on my Gtab. Also BlueGPS app to connect to TomTom MkII. When I try to use copilot, it says: NO GPS FOUND.
A little history: When I bought GPS receiver I was running gADAM 1.1.0, installed BlueGPS and paired the device. It worked fine with Google navigation....
Yesterday finally installed CoPilot Live 8, turned on bluetooth, paired with the receiver, found my device in BlueGPS and turned it on. CoPilot recognized GPS right away and started working (oh, mock location is checked).
It was just one time deal.
Now, no matter what I do I cannot make it work again...
Running TnTL 4.2.5
Any help appreciated.
Update:
Thought crossed my mind that GPS receiver not working.....
D/loaded "GPS for Google Earth" paired with my laptop and got position right away. So, one question is answered: It's not the receiver.

Is your bluetooth on? Check in settings
You need to start Blue GPS each time you use it.

Just a quick update......
Traced all steps I took after installing the CoPilot and successfully connecting GPS.
I d/loaded and installed a widget to turn on/off Bluetooth.
That program probably conflicted with some resources and prevented Bluetooth GPS to work with CoPilot.
After un-installing the widget nothing changed, had to reformat everything and re-install the ROM.
Took me about 30 min, but now I'm enjoying my G-tab as GPS!!!

[Q] What GPS Receivers work with the KFHD

I posted this as a comment on a thread, but then noticed it was in the wrong KFHD section.. Appologies.. Can anyone help with this, the question would most likely be the same.... What GPS Receivers work with the KFHD, whos had success and who's tried and found a certain one didnt work ?
Ive got a BT338 GPS Receiver and trying to get it going on two rooted KFHD 7" both have KFHD xSettings installed, I must have spent about 6 hours reading different threads and trying things.
One on FW 7.4.3 and one on FW 7.4.1- tried them both with de.mobilej and Bluetooth GPS Provider.
The KFHD 7" on FW 7.4.3, this one connects to the Bluetooth device, however no satellites can be seen to have been detected, also Google maps and navigation both report "Searching for GPS" even though Blutooth GPS reports as active!
The KFHD 7" on FW 7.4.1 this one cannot connect to bluetooth device ??
If I launch GPSHunt, on either of them - this does not see any satellites either
All the usual stuff is turned on -
Location based services ON
Allow Mock Locations ON
Tried a few different permutations nothing seems to work for me, the frustrating part is that everything on the FW 7.4.3 seems to work okay standalone but wont just come together I cant understand why it will connect to the bluetooth receiver but not detect satellites, even though the receiver is reporting that satellites are detected (slow blinking green light).
Any help or advice appreciated
Thanks in advance

As the kindle hasn't an internal GPS, you need an app that acts as an intermediary between the two devices, an app that integrates the GPS inside the system, a "GPS Provider". All the providers that I know need to be set "Allow Mock Locations" in DEV settings to work.
From AmazonOS 7.3.1 there is a protection that hangs the program who access "Mock Locations".
But there are a few exceptions to overcome that limitation:
Fist, "Bluetooth GPS Provider"(Michael Chourdakis) is immune to that protection and injects coordinates to the system(works but jumps to a distant point and returns every now and then), is very basic and is hard to connect.A special case is "Bluetooth GPS"(from GG MobLab aka Goo goo) only installable in kinology( another protection that refuses the installation of GPS related apps), that connects perfectly to any dongle but hangs immediately when "Use Mock Location" is set inside the app...
Second, there are map based apps that own their "GPS provider". This allow them to connect to a paired GPS and work, but they don't inject coordinates to the system. I know two, Trekbuddy and Oruxmaps.
All this is theoretic, as you must test with your hardware the clues I give . There are also some utilities that transform an android phone into a GPS dongle, but my experience has been disappointing.

Thanks for the advice gflorezarroyo, I'll give Trekbuddy and Oruxmaps a try :good:

Great news gflorezarroyo, Oruxmaps works you just have go into the settings on the program and enable Bluetooth GPS, then in following screen check the box "Enable GPS from bluetooth device" then turn the GPS sensor to "ON" Thanks again :good:
This works with both the TomTom wireless GPS MkII and the BT338 GPS Receiver

I'm on 7.4.3 and use Bluetooth gps provider. I have a HOLUX M-1200 bluetooth gps. iGO works, navigon works, gmaps work.
Before the 7.4.3 update, nothing worked. After you open Bluetooth gps provider just try a few times to connect to the paired GPS device. It will fail a few times, but you will eventually get it to connect.

Thanks for the info phonexpert_alex, I also got Locus Map Free (Asamm Software, s. r. o.) to work very well on both Kindles.. Using the TomTom MII bluetooth reciever and a downloaded (for offline use) vector map of GB.. Its fully working and down to street level with the maps, postcode search etc etc, a really nice piece of mapping software, I will use it for a couple of weeks checking for stability and then buy the pro version (£5.99), It will help support the developers even if I dont use any of the added functionality, thanks again :good: