[Q] Sense 2.2 roms dont flash =( - Hero CDMA Q&A, Help & Troubleshooting

I really want to flash a 2.2 Sense rom but for some reason i always get a boot.img error. im using cwm 2.5.0.7 and it usually goes fine until about line 100 something then i get the error. I have tried re downloading, using ra, wiping and formating everything, wipe dalvik, etc and they still dont flash. Anybody know why?

Do you have an ext partition on your SDcard?

oohaylima said:
Do you have an ext partition on your SDcard?
Click to expand...
Click to collapse
No. Could that be the reason why?

If it's the same file could be a bad download. Just need to wipe data, cache, and dalvik. Then flash. Unless you're using firerat. Works fine for me that way.
Sent from my HERO200 using XDA Premium App

Related

unable to install any rom

There is some problem in my phone i m only able to install rom which is less than 68mb and and whenever i install cyanogen rom gapps wont install currently i am using stock rom so plz help i want to install cyanogen's 6.1 thanks
Stock ROM isn't less than 68MB. It's ~70-80MB.
Jack_R1 said:
Stock ROM isn't less than 68MB. It's ~70-80MB.
Click to expand...
Click to collapse
lol ok 70 mb but how do i fix this, should i give it to htc for repair?????
What makes you think you have this problem? Can you provide details?
Sent from my Nexus One using XDA App
when i try to install these are the follwing errors:
enoms:set_perm_recursive 0 2000 0755 0755
Can't chown/mod /system/xbin error
cyanogenmod 6:after flashing rom and gapps i wont wont get gapps there will be no youtube no market no gmail&chat.
eViL's NXSense HD v.0.8:unable to flash i forgot the error
RoDrIgUeZsTyLe CM6 Final LimeMOD R5:flashes properly after a reboot i dont get that usuall green cyanogen boot screen, I dont know how now i get android writted in bold letters and its blinking and after that i get google setup wizard then soft and hard keys are not responsive and keyboard wont allow me to numbers neither dial pad works.
Kang-o-rama-1.0-b2:same as above
MicroMod v2.8.0 :flashes but does not boot.
LeoFroYo 2.0.0:working properly but its outdated
stock frg83 works
tried flashing with both recoveries amon's 1.7.0.1, 1.9 and clockwork mods recovery 2.5.1.0.i even did try installing from rom manager no luck
i even changed the radio and tried now its Korean OTA 32.50.00.32U_5.12.00.08.
i did wipe cache and cache sd ext everything properly
is there another way to install rom or what should i do to fix this error i m really frustrated now i dont know what to do please help thanks:mad
Did you wipe?
Sent from my Nexus One using XDA App
danger-rat said:
Did you wipe?
Yes I did with both the recoveries
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App
Interesting...
What did you wipe, and how?
Sent from my Nexus One using XDA App
I wiped from recovery wipe data and cache wipe dalvik cache and wipe sd ext.I hope so this is the meathod to wipe
Sent from my Nexus One using XDA App
Yup, that should've done it.
Not sure what is going on, all I can suggest a factory reset, or revert to stock and start again...
Sent from my Nexus One using XDA App
factory reset as in stock recovery and and stock rom?
That's about all I can suggest. You can back up before, and you can always root again...
Or wait for some other advice, I'm sure there's better ideas floating around, and honestly, I've never heard of this issue before...
Sent from my Nexus One using XDA App
So do I never heard or read about this kind of problem
Sent from my Nexus One using XDA App
i prefer u format ur sdcard on the pc, i have feeling saying this from the sdcard. Try and let us know
finally some reply some hope yea even i thought some thing must be wrong with the partition or the sd card.So i had a spare 2 gb nokia class 2 sd card i formatted it and tried flashing cyanogen 6.1.0 it flashed but againg the same problem Gapps are not installing soo i tried Gapps-Mdpi-tiny-20101020-signed and i got market and youtube but still its not a permanent fix so please suggest what should i do i m completly frustated .....

CM Nightly and Google Apps

I know you don't have to wipe to upgrade to a CM nightly, but should I get Google Apps again when prompted to in ClockworkMod?
Sent from my Nexus One using XDA App
If it's the same version that you already have, then there's no point...
If it's a newer version, then go for it...
Latest version can usually be found here:
http://forum.cyanogenmod.com/index.php?/files/category/2-nexus-one/
Sent from my Nexus One using XDA App
Thanks a lot. I need my flashing fix so I'm going to start doing nightlies. I just can't wait for final.
Sent from my Nexus One using XDA App
Flashed it without the GAPPS and upon rebooting they weren't there. I just downloaded them from the link, flashed, and now I'm setting them up. I guess it deletes all of your login info. No biggie, easy stuff.
Sorry, if you're doing a full wipe, then you will need to reflash the gapps. I seldom wipe on the nightlies...
Sent from my Nexus One using XDA App
Oh no I didn't wipe, that's why I thought it was strange. No biggie.
Sent from my Nexus One using XDA App
its a RM shortcoming.. you have to select gapps at that prompt or reboot into recover and manually flash just the ROM.. otherwise your gapps dont survive
Got it!
Sent from my Nexus One using XDA App
Memnoch30 said:
Oh no I didn't wipe, that's why I thought it was strange. No biggie.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I was looking at the Cyanogen site, and few people have been commenting on some of the latest nightlies removing the gapps (presumably overwriting the whole system folder).
No biggie, and not a common occurrence...
Sent from my Nexus One using XDA App
need help on cwm
hi, im some what new to this and im having some problems with wcm on mytouch 4g... well had the phone working great and i when to try out a new rom called synergy-rc1 i booted in to recovery then wipe data/ factory reset then wiped cache partition and also wipe Dalvik cache then installed from sc card like before everything was going great then restarted the phone after it completed the install and it booted into the synergy rom screen then it sat there for about 10min and it restarted again and it keaps looping over. restarted in to recovery (cwm ) and tried to do a a factery reset and clear cache and this is what i got and i cant even do a restore.
clockworkmod recovery v5.0.2.0
checking MD5 sums...
Erasing boot before restore...
restoring boot image...
restoring system...
Error while formatting /system!
any help would be appreciated [email protected]
probably a corrupt sd partition.
cwm is known top do that..
try formatting your sd card after saving the content to your pc first.
after format move stuffs back
I would go ask this question in the mytouch 4G section you will probably get better answers.

[Q] can't flash any rom but asop v0.9.9.2

no ext, no MTD, have tried recovery v2.0.0.5 / v3 / v4
Used to flash often without a problem, until some day all roms suddenly fail.
to make sure all data/cache are cleared, all wipe (4 totally) and all format (but sdcard/ext) are done. still i wouldn't work. only asop v0.9.9.2 will do.
could anyone tell me why?
not a soul
not a soul
At least the only rom you can flash is arguably the best ROM over made for the heroc. Could be worse.
Sent from my wildheroc using XDA App
what error is it giving you?
MrDowntown12 said:
At least the only rom you can flash is arguably the best ROM over made for the heroc. Could be worse.
Sent from my wildheroc using XDA App
Click to expand...
Click to collapse
thanks for replying. I totally agree with you, however, one could be curious sometimes to try new things.
ajrty33 said:
what error is it giving you?
Click to expand...
Click to collapse
thanks for replying.
it just stopped at the white screen with HTC logo
i believe i've waited long enough to make sure it's not working.
and there wasn't any error reported while flashing.
Could it be SDcard problem?
I think you're not wiping good enough. Flash caulkins format all then wipe EVERYTHING manually except SD card but NOT excluding sd-ext. Then go to advanced (assuming you're on cw) and wipe dalvik. Then flash caulkins format all one more time. Flash the rom and report back. I'm sure it will work
Sent from my HERO200 using XDA App
Try Exactly what the ABOVE post suggested, and Report back!
abadasstanker69 said:
I think you're not wiping good enough. Flash caulkins format all then wipe EVERYTHING manually except SD card but NOT excluding sd-ext. Then go to advanced (assuming you're on cw) and wipe dalvik. Then flash caulkins format all one more time. Flash the rom and report back. I'm sure it will work
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
don't know what your "caulkins" means.
i use cw recovery
4wipe(data/cache/dalvik/battery) + 4format(boot/cache/data/system)
I don't perceive any other wipe/system options.
anyway thanks for reply
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
PMGRANDS said:
Try Exactly what the ABOVE post suggested, and Report back!
Click to expand...
Click to collapse
i use cw recovery
4wipe(data/cache/dalvik/battery) + 4format(boot/cache/data/system)
I don't perceive any other wipe/system options.
anyway thanks for reply
Caulkins is a zip that formats the boot, data, system, and cache in one step. It can be.found in the first post of the wildheroc Rom thread.
But your doing what it does already, it just makes it faster really. Still worth a try tho
Also, I remember when people used to have problems flashing stuff, a wipe of the SD card helped. Just back everything up on your computer the wipe it with everything else.
I don't know if they ever figured out why it worked, just that sometimes a bad file get on the card and wont let it boot. Just another suggestion to try.
Sent from my HERO200 using XDA App

[Q] Wipe for update?

Hi. I'm new at using custom rom and I have a question regarding updates.
I'd successfully flashed my milestone to miui 1.9.9 rom. So if I'll like to update it to 1.9.16, do I still need to do wipes like what I did when I 1st flashed it? Or do I just apply update?
Thanks
lordsbm said:
Hi. I'm new at using custom rom and I have a question regarding updates.
I'd successfully flashed my milestone to miui 1.9.9 rom. So if I'll like to update it to 1.9.16, do I still need to do wipes like what I did when I 1st flashed it? Or do I just apply update?
Thanks
Click to expand...
Click to collapse
Techincally all you need to do is wipe cache partition and dalvik cache before and after flashing (don't forget flashing the baseband as well!). If you have problems, try a full wipe.
Sent from my Milestone using xda premium
Thanks So doing a wipe on the cache partition and dalvik cache, am I correct to say I don't need to do a titanium backup?
lordsbm said:
Thanks So doing a wipe on the cache partition and dalvik cache, am I correct to say I don't need to do a titanium backup?
Click to expand...
Click to collapse
No, you shouldn't have to do a backup. Create one just in case anything goes wrong, or you need to do a full wipe.
Sent from my Milestone using xda premium
skadude66 said:
No, you shouldn't have to do a backup. Create one just in case anything goes wrong, or you need to do a full wipe.
Sent from my Milestone using xda premium
Click to expand...
Click to collapse
Thanks lot for help
If is an update it wont be necessary, if you are changing rom you will have to

Wifi Doesn't work on DREAMteam v1.9

wifi doesn't work here, only send message "WIFI error" wi i fix this
Did you do a full wipe? I suggest redownloading the Rom , do a full wipe and reflash. Sorry for the trouble
Sent from my HTC Wildfire S using Tapatalk
maximo360 said:
Did you do a full wipe? I suggest redownloading the Rom , do a full wipe and reflash. Sorry for the trouble
Sent from my HTC Wildfire S using Tapatalk
Click to expand...
Click to collapse
yes i do a full wipe, now i redonwloading the Rom for a reflash. bluetooth don't work
Bluetooth and WiFi doesn't work, i Reflash but it still don't work
lockheadgas said:
yes i do a full wipe, now i redonwloading the Rom for a reflash. bluetooth don't work
Click to expand...
Click to collapse
go into fastboot and do fastboot erase system -w
just to be 100% sure that everything is gone when you are wiping
use ohsaka superwipe 2 before flashing. following is the xda link. I'm using this Rom at present. it runs very smoothly on G1. The only issue I have is moving apps to ext partitions.
http://forum.xda-developers.com/showthread.php?t=834812
i'm going to do this

Categories

Resources