Hi Guys
When i got my phone a few weeks ago i used Chevronwp7 to unlock it, I arrived home from a short break today and hooked my phone to my pc only to find that i am unable to unlock it again. I have tried everything i can think of ????
I am on 7004 firmware nothing has really changed on the phone, I have also tried to hard reset it but made no difference.
I would appriciate any help on this one!
Regards
Mark
I have 7008, and the only thing thad worked for me was hard reset.
Related
hi everyone. im new to the site. i'm amazed how much i never knew about my xda2i before i found this site. there are sooo many cool tools and stuff i'd never heard about. indeed, i wish i had found this site before i made a huge mistake!
i found an update for windows mobile 2005 and tried to use it to update my xda2i (which i now know is really called alpine). of course it didnt work out how i hoped. it ran through the whole process correctly. it erased the curent rom and - so it said - it wrote the new rtom to my device.
unfortunately my xda2i no longer works. the screen is blank and nothing seems to help. soft and hard reset dont work. i tried taking out the battery, and putting it in the cradle. the red light on the top right corner flashes when i do this. but still no joy. i tried re-loading the 2003 se rom but active sync wont detect my xda2i!!!
i cant get any other tools to work because they all seem to use active sync...
i was hoping there was a way to manually put my device into bootloader mode but i cant find anything on how to do this. if anyone can help it would be much appreciated!!!!
all sorted
well it looks like i was a bit premature in posting my problem. i've just been told how to manually put my alpine into bootloader mode. it worked a treat and i have no problems anymore. many thanks and once again im grateful to the have such a great resource as this site! i'll definitly donate next time i have some money in my paypal!
for anyone else having similar problems i'll just say how to put your device into bootloader mode as i had the hardest time finding it out. too many people assume this to be common sense and dont explain for all of us newbies! lol
simply hold down the power button, the select button (thats the directional pad pressed down centrally) and the reset button for a couple of seconds. this puts the alpine into bootloader mode.
athomas81 said:
hi everyone. im new to the site. i'm amazed how much i never knew about my xda2i before i found this site. there are sooo many cool tools and stuff i'd never heard about. indeed, i wish i had found this site before i made a huge mistake!
i found an update for windows mobile 2005 and tried to use it to update my xda2i (which i now know is really called alpine). of course it didnt work out how i hoped. it ran through the whole process correctly. it erased the curent rom and - so it said - it wrote the new rtom to my device.
unfortunately my xda2i no longer works. the screen is blank and nothing seems to help. soft and hard reset dont work. i tried taking out the battery, and putting it in the cradle. the red light on the top right corner flashes when i do this. but still no joy. i tried re-loading the 2003 se rom but active sync wont detect my xda2i!!!
i cant get any other tools to work because they all seem to use active sync...
i was hoping there was a way to manually put my device into bootloader mode but i cant find anything on how to do this. if anyone can help it would be much appreciated!!!!
Click to expand...
Click to collapse
there is no window2005 rom for 02i at the moment. note that before upgrade ROM you have to find out the suitable rom for you PPC. 02i rom is always Alpile ROM. the newest is 1.11.171 radio is 1.04
All my hardbuttons work but nothing works on the screen no matter how long i press down or hard or soft. The touchscreen just isnt working. I just woke up this morning and it stoped working.
Does anyone have any thoughts?
Please help I dont understand why its doing this I cant turn my volume up or anything
Well,
You still have to provide a few more information if you really want someone finding out the cause of your problem!
What have you done last on your device before it happened? Are you still running on the factory installed ROM? Have you tried SOFT RESET and HARD RESET yet? And so on ...
Hmmm,
people always seem to forget that we have no clue about the actual condition of their devices! We further can't possible know what they have tried already to solve the problem. In addition, it is important to remember what had been done last on the device before the problem occured (such as installing / removing software, screwing with the device's registry, reflashing, giving it a bath and so on ...)
Well the last thing I installed on my phone was slide to unlock and that was like a month ago. I have soft and hard reset and I'm stuck in the set up after the Hard Reset were it has you touch to continue. I am on factory rom. The only software on it was TomTom 7, spb shell, slide to unlock. Everything worked fine on it and then I touched my screen one day and noticed it wasnt responding to my touch and it really just came out of the blue like I have not dropped it or got it wet or anything no problems until now.
Any other information you need let me know?
Thanks
hey guys got my tilt yesterday and falshed it with the diamond touch pro rom i also had s2u2 lockscreen enabled, well i plugged my phone in the charger last night i woke up and the touchscreen didnt work at all, first i soft reset the phone to no avial, then hard reset and now im stuck, the phone powers up to the welcome setup and cant get past it due to no touchscreen
heres what ive done to try to fix
soft reset
hard reset
changed the radio settings to 1.65
reflashed with htc 6.1 rom
any help would be appreciated also could somone let me kno if they think i should redo the hard sbl
i second this.. any help would be great
this is very weird, alot of people are having the same problem at the same time, I too am having that problem, I have never put a custom rom on my phone, my my touch creen also has stopped working, I've tried hard re-setting it, and that didn't work its just stuck on the stylus set-up screen, and then i even tried to hard flash the HTC kaiser rom again, same results.
Hi guys,
I've got a bit of a problem with my friends X1...
A while ago I updated my X1 to WM6.5 and it works perfect...
But last week my friend asked me to update her phone as well, so I did
Now here's the problem:
After updating, the phone got stuck on loading, it didn't even get past the SE screen...
Turned it on and off for a couple of times, soft reset, hard reset, nothing worked...
I was still able to get the phone in the tri-colour screen, so I did, and I installed a stripped down version of WM6.5
And it worked!
But this afternoon she called me up to say that the phone was having problems again.
She often can't turn it on, and when she can it seems as if it has lost all of its memory again, comletely blank as if you just got it out of the box... (So you have to setup your screen again, the time and date etc...)
I did it exactly as id did mine, and mine still works perfect...
What could have gone wrong?
First I put Hard-SPL on the device.
Then I used the rom update utility from christian-web.nl/sections.php?section=Xperia_rom (I used version 3.810)
And thats it!
Does somebody have any idea what could be the problem?
Thanks,
Rob
A few days back I read somewhat of the same story, about the phone hard resetting by itself. Can't recall where, but it was somewhere in the Xperia section of this forum.
Did you do a hard reset after flash? Or maybe task29 before flashing her phone?
Try the hard reset first and see if that helps.
Hey guys, sorry for the bother, I realise there are a few threads already about this problem, but I tried most of them to no avail unfotunately...
Basically, a few weeks ago my HTC Tytn II just decided to die on me, i.e. once it is switched on, I just see the opening screen and it just stays like that... I tried hard resetting by pressing the 2 soft keys and reseting, it goes to the screen, I restore to factory settings, but I get the same story...
Also, now once the phone is plugged in to charge, it just refuses to power up (?).
I have to mention I had trouble with the usb connector a few months ago and had to replace it... But it worked fine after that for months...
Any ideas? I don't care about the data, I backed most of it up in any case, I just want to make the phone work again if at all possible...
Thanks in advance!
BTW, I have HardSPL 3.29 installed and have previously flashed my ROM to the standard Windows mobile 6.1
vedadp said:
Hey guys, sorry for the bother, I realise there are a few threads already about this problem, but I tried most of them to no avail unfotunately...
Basically, a few weeks ago my HTC Tytn II just decided to die on me, i.e. once it is switched on, I just see the opening screen and it just stays like that... I tried hard resetting by pressing the 2 soft keys and reseting, it goes to the screen, I restore to factory settings, but I get the same story...
Also, now once the phone is plugged in to charge, it just refuses to power up (?).
I have to mention I had trouble with the usb connector a few months ago and had to replace it... But it worked fine after that for months...
Any ideas? I don't care about the data, I backed most of it up in any case, I just want to make the phone work again if at all possible...
Thanks in advance!
Click to expand...
Click to collapse
Have you checked with other battery? If not, proably is your USB conector.
Thanks for the reply - but in the end, just reflashing the ROM directly from the SD card worked out with some fingers crossed!
I did lose all the data, but hey, at least my HTC works again...
All the best!