[Q] Diamond won't update rom (HardSPL) - Touch Diamond, MDA Compact IV General

Hi all,
I'm sorry if it's the wrong section but i'm new here
My question is:
Why does my Htc Touch diamond (1.93.0.0) not update to HardSPL (SPL-1.40.OliNex)?
It all works works fine, the whole installation, but when it's really busy (the progress bar is showed) In once it goes to 100% in like 1 minute.
My diamond reboot and shows a screen like when you hardreset your phone and start it for the first time, but the rom version still is 1.93.0.0
Thanks in advance!
Solved
Solution:
Just download another Rom Update Utility
Solved my problem

Related

Problem .cab installation after flashing

Hello everyone. I wonder if someone can help me on my problem. I recently flashing my HD with ManiaHD ROM (http://forum.xda-developers.com/showthread.php?t=513876) and goes to 1.56 Olinex SPL before. I have 2 problem :
- 1st : a bad screen color when put on my phone (become normal after ON/OFF the screen)
- 2nd : I trying to instal TomTom 7, and the installation (.cab) locked in loading bar (with the hourglass turn and turn again ...). After that, i try to instal another program (always in .cab) and the installation can't run (no error message but the screen is the same with cross in the right upper corner.
Someone have had this problem before? Thanks a lot.
Yogui
yogui said:
Hello everyone. I wonder if someone can help me on my problem. I recently flashing my HD with ManiaHD ROM (http://forum.xda-developers.com/showthread.php?t=513876) and goes to 1.56 Olinex SPL before. I have 2 problem :
- 1st : a bad screen color when put on my phone (become normal after ON/OFF the screen)
- 2nd : I trying to instal TomTom 7, and the installation (.cab) locked in loading bar (with the hourglass turn and turn again ...). After that, i try to instal another program (always in .cab) and the installation can't run (no error message but the screen is the same with cross in the right upper corner.
Someone have had this problem before? Thanks a lot.
Yogui
Click to expand...
Click to collapse
Your bad green screen effect is caused by not following correct procedure to flash rom. You most likely tried to flash rom without using USPL or HSPL. Read cRaCKwHoRe's guide and also section in wiki on green screen which can be found in this page
Thanks for your help. But I'm in 1.56 HSPL Olinex. I try to falshing with the USPL v2.5 and it works find now. Thank a lot
Best regard
yogui said:
Thanks for your help. But I'm in 1.56 HSPL Olinex. I try to falshing with the USPL v2.5 and it works find now. Thank a lot
Best regard
Click to expand...
Click to collapse
You don't need to use both USPL and HSPL. You use one or the other.
Glad you got it fixed though

HardSPL problems :(

Hi guys, I am trying to flash my HTC Diamond GSM version with Hard-SPL-Diamond-OliNex. When I click the Update buttone after running the RomUpdateUtility.exe everything seems to go as described in the install notes, my HTC Diamond screen turns grey, and at this description, my diamond seems to disconnect from the PC therefore not able to continue with the flashing after that. Is there something I am doing wrong? Thanks for any help!

Diamond Help!!!

Ok, I'm a complete newbie at phone modding... I have read numerous websites and tutorials and posts on how to upgrade my Touch Diamond to Windows 6.5 but i fail. I fail miserably.
My Touch Diamond is an Orange UK Handset with Windows 6.1, about a month ago i upgraded my phone with an official Orange HTC ROM, so I'm currently at version 1.93.405.1 WWE...
Ok so my problem...
I used Olinex HardSPL version 1.38 and I can access the bootloader screen. Easy.
I then try install the Radio, Currently installed is 1.00.25.05 as standard, so I try install the same one again... The connection to my device is active and the screen goes black as the RUU does its thing, then.... nothing! the percentage bar on my PC stays at 0% and my phone is black.
So i think damn it ill try installing the ROM anyways as I already have the Radio version i want, and when the RUU starts the percentage thingy again... its stopped again at 0% and my phone now also says 0% and i check device centre for the connection and its not there... NO CONNECTION! so...
please... tell me where Im going wrong, do i need to CID the phone?
any help would be appreciated, Thanks in advance.

Battery or Charge / charging LED no turn to Green problem

have every one this problem ?
I have seen this bugfix at the HTC-Support-side for the Diamond2 :
"Update for HTC Diamond2 Power LED Notification"
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
"This update for the HTC Diamond2 allows you to see the battery charging status right from the LED. Now enhanced to illuminate green when fully charged, with a quick look you will know when your phone is powered and ready to go.
Installation Instructions:
Note: This Update only can be applied for ROM version between 1.36.XXX.X to 1.44.XXX.X and 1.66.XXX.X to 1.76.XXX.X "
-------------------------------------------------------------------------------------------------------------------------------------------------------
at my Jade I use the newest official ROM from HTC "2.32.407.2" with radio 41.30.12
i don´t have to try install this bugfix at my Jade, i think don´t works if my Rom version is over this is described for the Diamond2 .
I´ve read here from many users there have a problem with charging the Jade, some different solutions but nothing is a really correct solution to solve this problem.
the different solutions I´ve read is:
a. charge with power on and turn the backlight off (nothing turn to standby)
b. turn the Jade complete POWER OFF not in standby (this works at my Jade)
c. install a third party software for the Icons at the top (especially for the Battery Icon).
d. but the best (ironic) and the coolest solution comes from the HTC support, there I´ve send a mail with a discribe from this problem:
"please call ARVATO-Support to send the Device for Repair" ---- i think the guys from this HTC Support have anyplace in Germany a "one EURO Job" .....
what would this Guys at ARVATO to do with the JADE, they are Sorcerers or have a Cristal-Orb there can see the answere ?
have everyone here another solution ?
Wrong section. Should have been posted under "Jade/Jade".
Hi,
Have you installed any third party software that display a battery icon? If so, that would be the problem. Try to uninstall the third party software and do a soft reset, then try to charge the battery. Thanks.
No, I don´t use 3rdParty Software for the Icons at the Top of the Screen, I use SPB Mobile Shell where I generally don´t see the icons.
I think it´s a bug in the Rom or Radio, it´s the same failure at the Diamond2 and for that Device give it a Bugfix from HTC.
hi
1. if u are using any cooked rom like the Pdaviet rom yes this will happen
2.if ur using only the original rom no this should not happen
u can try doing a hare reset how to do it clik last line of my sign iv explained the same their but remember to backup ur phone as u will lose all data on ur phone when u do it OK
Chris1507 said:
No, I don´t use 3rdParty Software for the Icons at the Top of the Screen, I use SPB Mobile Shell where I generally don´t see the icons.
I think it´s a bug in the Rom or Radio, it´s the same failure at the Diamond2 and for that Device give it a Bugfix from HTC.
Click to expand...
Click to collapse
you read this at my first POST "at my Jade are the newest official ROM from HTC "2.32.407.2" with radio 41.30.12"
this Rom is not from Pdaviet.
after a full new Official Rom upgrade I´ve made, it is a hard reset normal.
I have the same problem.
At my Jade I use the official ROM from HTC "2.32.401.2" with radio 41.30.12. Anybody know the solution for this problem?
I think the Problem is..... "battdrvr.dll"
if everywhere have a JADE with a earlyer ROM where the charging works, can this "battdrvr.dll" copy and upload here.
this .dll was locate ind the Windows directory.
then we can try to change with the current battdrvr.dll
I´ve see it give a "XDADev_BatFix.CAB" , but this works perfect with the HTC Prophet with the same problem.
hmmmm, I don´t want to try this bugfix, i think this brik eventually the Jade...
It seems that HTC have generally a problem with many Devices with the Powermanagement.
I find if I restart my Jade, battery indicator shows me real battery charging status.
Same here! Restart and all's OK. Running stock firmware, newest update from HTC.

blac100 touch screen doesnt repond at start up confiruration

Hi every body
the Problem is i did already post the problem of the green display now i solved it by flashing with USPL GUI v 2.5.zip then updating the rom again in french with HTC FRA 1.56.406.....
now at start up phone requir as usual touch screen configuration of the stylet
the phone doesnt really repond or react on time as if i didnt tick
when i put the battery the phone starts up no way to shut down and to make a hard reset
the question is there any way or solution to fix the problem with the touch screen ?
did i miss a step after flashing with rom 1.56 ?(it was the same version in german and i changed it in french )
manouba said:
Hi every body
the Problem is i did already post the problem of the green display now i solved it by flashing with USPL GUI v 2.5.zip then updating the rom again in french with HTC FRA 1.56.406.....
now at start up phone requir as usual touch screen configuration of the stylet
the phone doesnt really repond or react on time as if i didnt tick
when i put the battery the phone starts up no way to shut down and to make a hard reset
the question is there any way or solution to fix the problem with the touch screen ?
did i miss a step after flashing with rom 1.56 ?(it was the same version in german and i changed it in french )
Click to expand...
Click to collapse
Plenty of threads already about screen alignment and no responsiveness etc like these:
http://forum.xda-developers.com/showthread.php?t=557096&highlight=align
http://forum.xda-developers.com/showthread.php?t=587931&highlight=align (try alternative solution to bypass alignment screen)
Suggest you try reading these first, search and if still not working post in one of the existing threads
Thread closed

Categories

Resources