Hello everyone,
Two days ago I try to make a firmware update to Gingerbread trough Kies.
After everything is finished the phone start, shows the main logo (the white one), start that animation with "S" and come on a black screen. Time to time he vibrate 2 or 3 times and only the back and menu buttons are illuminated.
1. Cannot use 3 buttons to get into download or recovery mode
2. Cannot put the phone in USB debugging (obviously)
3. For unknown reason I cannot instal ADB drivers (win7 shows the yellow triangle)
4. Samsung drivers are installed on Modem and USB (shows Samsung)
5. On "devices" , can be seen but again no ADB
6. ODIN see it on com8 but again for some reasons it wont work (probably because he work in download mode )
7. SDK is installed
8. ADB shows "no devices found"
9. No other button combination works (home+down , up+down +battery in + USB plugged ... etc)
Any suggestion/help ?
Thank you very much for reading and hopefully Ill get some help
Best regards,
Andrew
Have you tried "emergency reset" or whats it called in Kies?
Did you have the 3-button combo before the flash?
If so try to remove the battery and then with it removed press the combo and insert the battery-
Maybe you refer to that in number 8?
A JIG will for sure help you to get into download mode.
Good luck.
/qsec
Hello and thank you,
3 buttons combo didnt work before
Kies stays with the status "connecting" but no phone shows up in it.
Thankx,
Andrew
You in the UK .
Gingerbread no update via Kies its not released yet .
Kies has Firmware recovery or some such tab.
Was your phone lagfixed ..
Did your phone have custom rom .
Current condition of phone looks like you need download recovery jig from front page .
Or if no lagfix no custom rom then Samsung service centre failed Kies flash .
jje
Yes lag fixed OCLF
And Kies said something about firmware update. I do have Froyo 2.2 and the logical thing was Ginger so thats why i thought it is.
Thank you,
Andrew
antraian said:
Yes lag fixed OCLF
And Kies said something about firmware update. I do have Froyo 2.2 and the logical thing was Ginger so thats why i thought it is.
Thank you,
Andrew
Click to expand...
Click to collapse
Lagfix a no no thats what F*** your phone .
Froyo 2.2 next update 2.2.1
Download recovery jig .
jje
JJEgan said:
Lagfix a no no thats what F*** your phone .
Froyo 2.2 next update 2.2.1
Download recovery jig .
jje
Click to expand...
Click to collapse
Never had any problems with lagfix, but i guess if you do things in the wrong order without removing it before upgrading.
OP, did you follow any instructions, or just do it blind?
Never had any problems with lagfix
Your choice but failing to remove lagfix before flashing is a well posted problem on XDA .
jje
This is very true.
It was stupid of me flashing with lag fix installed evendo I read that YOU MUST remove lagfix before do it ....
Cheers,
Andrew
antraian said:
This is very true.
It was stupid of me flashing with lag fix installed evendo I read that YOU MUST remove lagfix before do it ....
Click to expand...
Click to collapse
Worse, you flashed without enabling 3 button combo prior. Due to that you're unable to get into download nor recovery mode unfortunately. So unless that emergency firmware option in Kies won't help you will have to build or buy yourself a jig dongle/cable which is plugged into the phone by USB to force download mode. Check on ebay UK, there are surely some people selling professionally built ones for just a few pounds (got one myself from US for just $7 or so).
Once you have that, re-flash with Odin.
And once your phone is OK again, get that 3 button combo working! I used this method successfully. Soft bricked the first time thanks to using USB hub instead of direct USB as it wasn't mentioned in the stickies sadly. Yet thanks to the Jig I got prior I tried again and flashed my phone to enable 3 button combo forever.
P.S.: there is something else very vital I came across recently and am glad I saw it in time: backup of the /efs folder which contains IMEI etc:
http://forum.xda-developers.com/showthread.php?t=859914
(I hope that's mentioned in the stickies somwhere but if so I would have seen it unless I missed one)
After reading in these forums for hours before trying my very first flashing I might want to write a comprehensive guide...
Related
hello have flashed virant android 2.1 russian on the captivate due to mistake after that volume button and screen rotation problems i had. i was recomended to flash captivate kernel - i donloaded it and flashed it with mistake - i think i flashed in in wrong place ( i do not remember if i chose PDA, CSC, or PHONE) after that i have a big problem i downloaded one clock odin make phone into download mode by pressinf 2vol buttons, inserting usb cable, than the battery - because other ays i cant enter download mode in odin one clock com4 recognizes i pusg start button but nothing after @DO NOT TURN OFF [email protected] notice is done phone still with the yellow android man in triangle and nothing happens, please help me to solve it i searched this captivate forum for half of a day but no answed found my phone is brick for now and i need a phoen for my work
is there any wariant for reflashing it?
by the way i tried to reflash it by odin vith the vibrant firmware it flashed but on first startup screen gone with different dots on it ( like bad tv signal on television) than it flashed and started but still with that problems can i go back to any working captivate firmware? and how? thanks
maxxis said:
hello have flashed virant android 2.1 russian on the captivate due to mistake after that volume button and screen rotation problems i had. i was recomended to flash captivate kernel - i donloaded it and flashed it with mistake - i think i flashed in in wrong place ( i do not remember if i chose PDA, CSC, or PHONE) after that i have a big problem i downloaded one clock odin make phone into download mode by pressinf 2vol buttons, inserting usb cable, than the battery - because other ays i cant enter download mode in odin one clock com4 recognizes i pusg start button but nothing after @DO NOT TURN OFF [email protected] notice is done phone still with the yellow android man in triangle and nothing happens, please help me to solve it i searched this captivate forum for half of a day but no answed found my phone is brick for now and i need a phoen for my work
is there any wariant for reflashing it?
by the way i tried to reflash it by odin vith the vibrant firmware it flashed but on first startup screen gone with different dots on it ( like bad tv signal on television) than it flashed and started but still with that problems can i go back to any working captivate firmware? and how? thanks
Click to expand...
Click to collapse
Hello maxxis.
I actually run in to this all of the time. Odin *never* works the first time for me. It basically hangs and I have to screw with unplugging and plugging in my phone.
Do not take this as advice, this is what I have done and it works on my phone:
0) Make sure the 3 button combo gets you in to download mode. If not, stop, find a 3 button fix and make sure it works or make a jig: http://forum.xda-developers.com/showthread.php?t=841512
1) Start Odin. Wait for it to get ready.
2) Put your phone in download mode
3) Plug in your phone to a USB cable connected to the BACK of your MOTHERBOARD - no add-in cards, hubs, front ports or any other nonsense.
4) Try to flash with Odin. If it hangs, remove your phone, reboot and put back in download mode and try again. Do not unplug it if it is doing anything.
This usually works on my second or third try. Good luck!
You need to do a master clear. Or format the internel SD. Then flash vibrant rom.
Or try his post lol. I was too slow i guess
but i have captivate if i flash vibrant rom again it will not work correctly
Hi there guys, That's it .
After reaching my highest limit of searching / installing / removing , z4root , super onclick, which btw none work, I am on the edge, basically , loosing my mind, and all I would like to do is just root my phone and have it working properlly and faster.
Now there are so many old root methods as the one I tryed Does any of you guys can help me out and explain how do I root my Samsung Galaxy S I-9000, with froyo 2.2 firmware ?
Thank you Omri.
what exact firmware,
i used JL2 and super one click worked for me.
try all of them.
Gets stuck on " Waiting for Device "
and i already unplugged the phone a couple of times with usb debugging on/off , any chance that im doing somthing wrong?
flash speedmod kernel.. or cfroot kernel
Can you see phone from the PC?
It sounds like the Odin method of flashing a custom kernel is not an option (if not try that - lots of info in the kernel posts)?
If your computer is not recognizing the phone try remove and reinstall drivers and kies and then also clean out the port on the phone with alcohol (and try another usb cable if you have one).
That my two bits. I tried in vain to root from the phone alone with 2.2 but finally got odin working by cleaning the port and now the possibilities are endless.
What exactly is this "Flashing / Kernel" options exactly , because the computer recognizes the USB just fine. ??
See here
http://forum.xda-developers.com/showthread.php?t=822756
This is for speedmod (if you need other options go to the stickies in the development section and look for the kernel list near the bottom of the stickies).
Follow the procedure for Odin installation. You will need to ensure you can go into download mode (Vol Down, home and power buttons to see - it should show android with a shovel in yellow - you can pull the battery to stop it if just checking but don't touch anything while Odin is working). If you cannot get 3 button download working, look for that fix in the forums too. I did not have that issue so I can't point you in the right direction there.
I think hardcore's page (author of the rom) has a link to an Odin guide. But its worth getting to know a bit as it will save your bacon if you need to get back to stock for warrenty.
Once you have this rom you'll be rooted and have clockwork Mod which allows flashing from the phone if you like (most custom roms are based on CWM installation). This is what I did once I got mine back from warrenty with 2.2 and then I flashed Darky's rom keeping the stock modem.
juvenileomri said:
Gets stuck on " Waiting for Device "
and i already unplugged the phone a couple of times with usb debugging on/off , any chance that im doing somthing wrong?
Click to expand...
Click to collapse
If you are stuck at "waiting for device"
do not exit Super One Click
1. pull out the usb from the phone,
2. turn off by pulling out the battery
3. put the battery back, turn on & plug in the USB
Hi all. (pardon my english)
I've been looking through this forum for a few hours now and I think I couldnt find a solution to my problem. My phone wont boot. In order to make this easy for you guys to diagnose. Ill brief as much as I could remember of what I did to my phone
I followed this instruction on how install froyo from this link androidadvices dot com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
I have a samsung galaxy s I9000. As I recall before I did any modification it was on eclair AND yesterday I installed one click lag fix which I downloaded from the android market which meant i've rooted my phone.
TODAY, I tried installing voodoo (for the lag fix) and from the link above it states that I need to have my phone to run firmware XXJPY. I installed ODIN and when asked for a PIT file I've entered the one from the downloaded .zip file (which is the wrong file I think!?), still it says "pass!" and after that I couldn't boot
Oh one more thing. What happens if I fully bricked my phone? If send it to the seller, what will the seller do?
I've tried the 3 combo, 2 combo and 2 combo button with usb cable but still wont work. Can anyone help pleaseeeee.......
Looks like you have lagfixed your phone .
I installed one click lag fix
You then failed to remove the lagfix before flashing your phone breaking phone .
Try via Odin reflash with pit 512 and repartition checked .
That fails do the same but use 2.1 Eclair
You cannot have two lagfixes One Click Lag Fix and Voodoo lagfix .
Oh one more thing. What happens if I fully bricked my phone? If send it to the seller, what will the seller do?
REJECT it broken warranty if they can prove unauthorized modifications but that does depend upon the symptoms it shows a dead phone may just get a correct flash from service centre .
jje
JJEgan said:
Oh one more thing. What happens if I fully bricked my phone? If send it to the seller, what will the seller do?
REJECT it broken warranty if they can prove unauthorized modifications but that does depend upon the symptoms it shows a dead phone may just get a correct flash from service centre .
jje
Click to expand...
Click to collapse
correct me if i'm wrong but based on what i read i don't think he did any unauthorized modification. just tried to go from eclair to froyo.
ok here's an update, I managed boot it to download again and installed the proper 512.pit. Odin says "pass". On tutorial link I given it says
"So, now once you see the above screen with a Green box showing PASS! in the Odin then it means that your device has been successfully installed with the new firmware XXJPY 2.2.1 stock and is now safe for you to remove the USB cable from your phone and now you need to boot your device. Now after successful installation of the new firmware its now time to optimize your device with new firmware so that your phone becomes faster and zippier. First turn off your device, long press the volume up key, press Menu as holding both the buttons press the power button to start."
the difference with my phone is that its switched off instantly after downloading (right after it says "pass!"). When I press volume up + menu + start, it wont start Hope this could do some help.....
correct me if i'm wrong but based on what i read i don't think he did any unauthorized modification. just tried to go from eclair to froyo
Not through any Samsung channels .
As i said looks like you installed a rom with a lagfix enabled and that has broke your update .
Now after successful installation of the new firmware its now time to optimize your device with new firmware so that your phone becomes faster and zippier. First turn off your device, long press the volume up key, press Menu as holding both the buttons press the power button to start.
Dont know where thats coming from at all its nonsense in respect of rebooting an updated phone .
Update via Odin installs pass then phone should reboot if not take out battery for a while then press on button wait until boots .
The forum is littered with the correct instructions but its the lagfix that breaks an update lagfix off before update .
As i said flash to Eclair with repartition and 512 pit should fix the problem .
jje
It might pay you to go back to the forum you got these instructions from .
Or as i said download and flash according to XDA
http://forum.xda-developers.com/showthread.php?t=846913
jje
ok i got it to boot with eclair. I downloaded asia (cause I thought international I9000 are separated by region )and I got chinese version (which I couldnt understand!) lol. Which one do I download? I want english!
btw, thanks for the help!
nvm! solved!
Which one do I download? I want english!
Click to expand...
Click to collapse
Flash it with Eclair XXJM1 with 512pit. Remember the three boxes must be checked. i.e. Re-partition,Auto Reboot & Force Reset Time.
Then Flash with Froyo 2.2.1 (XXJPY) and this time No Pit & No Auto partition.
It will hardly take 15mins for both.
You're done!
I has problem D:
galaxy S i9000 wont boot anymore. Ive tried everything. i think. any suggestions as to what I can do?
Link to video explaining the problem: http://www.youtube.com/watch?v=H4tgIWcCSBg
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.
Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.
if he can access recovery, try wiping everything thru recovery then start again
Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.
What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)
@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.
You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.
REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App