is there a way to restart the kies sync without having to unplug and replug the cable?
simply restarting the MBT application doesnt seem to do the trick.
I am sure i am missing some thing really obvious.
tried google and forum search but to no avail.
Related
I don't know how it happened but all of a sudden when I connect my Kaiser to my computer via USB cord, it doesn't connect. It charges my phone but it doesn't let me explore my phone. Activesync or Windows Mobile Decive Center do not read my phone.
I don't know if this matters, but when I go into COMM MANAGER (I don't know if I unchecked anything by accident) but the Data Connection tab is turned off and I can't turn it on.
Does anyone have any suggestions on how I can sync my phone again?
I tried a hard reset, i tried a soft reset, i tried different mini USB cords but NOTHING worked...
A couple things.
Under the settings tab there should be an option for " enhanced USB networking". try to enable/ disable this.
Also, it is possible your USB port is no longer functioning properly. A search for USB Problems yields MANY results, some of the fixed include simple things such as reflashing a new rom/radio , to the extremes of having the USB port replaced on the mainboard.
Also, have you tried to sync it to more than just 1 computer? Try on a couple. Make sure your activesync isnt the cause.
Just like pyraxiate said, try toggling the enhanced usb networking opetion. Also give your mini usb port on your phone a visual inspection, its not uncommon for it to crack (mine's cracked before).
If all looks good, restart your computer and soft reset your device. Google for activesync restart, theres 2 or 3 apps that completely kill activesync and restart it. It also wouldn't hurt to check another PC to see isolate the problem.
GOT IT, thanks for your help guys. I went to Settings>Connections>USB to PC and then unchecked 'enable advanced network functionality' and it worked!
Glad to hear this one was a simple one
Have fun here on XDA!
same problem
I have been having problems getting my usb to connect/sync also and thanks for the idea to check for a crack in the mini usb port. I am new to all this, this is my first pocket pc - or even smart phone before Is there an easy way to fix this problem or is a "send back to company" fix only?
hello all.
i have a strange problem on my diamond. in a few days i charge my phone in a new car kit.
and now i have the problem that i cant connet my phone to pc with usb cable. just with bluetooth.
but the phone charge me and the headspeak work fine
maybe the rom its not good anymore?
if i will make a hart reset the will solved my issue?
thanks for the help
derfler d
,,,,
1 more thing, when i charge the phone in the car he was getting hot. and i power off my phone and out my battery and start over my phone again.
aybe this burn something into the phone?
hi
was it a third party car kit?
sometimes when you start your car you can get a power surge though it and it burns the usb port.
This happen to me and I had to send it back to be fixed. (it cost me to fix it)
also have a look here it may help http://forum.xda-developers.com/showthread.php?t=457255&highlight=charging
i try to make a bootloader but i can't
so i i make a hard reset ?
and what will when i make it... this start my rom over again like the first time that i install it ?
ammm after i doin a hard reset its still doesn't work for me...
some 1 ? ...
have you tried a different USB cable.
I had a similar issue before and it turned out it was the USB cable itself.
yeah i try it...
Did you try it on another computer?
When you connect the phone to the USB port, do you get the popup asking how you would like to use it? *ActiveSync, USB Disk, internet sharing)
If you don't get one, check your settings: Start Menu -> Settings -> Connections -> USB to PC.
Check what the options are and if the "Ask me first about USB connection" is enabled.
Reconnect the phone and see if it works.
If it still doesn't work, you should check the Device Manager in your Windows computer (if you use one that is). See if the device is recognised. You can try to remove the device and reinstall the drivers for it.
ai try on snythere computer and nothing. the phone asking me about active,usb disk and internet sharing. and also nothing. so i thing that my usb connecting s burn imself. lucky that we have bluetooth, slowly but it fine... 10q for trying helping me
maybe this works
hi,
I had the same problem, try this:
go to preferences > connections > usb to pc > and uncheck the advanced networking checkbox.
After that it worked for me. BUT! I Was unable to connect to the internet on my phone through my usb cable!
So I just uninstalled active sync disconnected my phone, checked advanced networking back on again and reinstalled active sync, be sure to remove all previous pairings between your pc and your phone. I hope this works for you
greets Daan
ps always make a back up of your contacts and stuuf when uour doing these kind of things, active sync just sucks *****
nope, nothing...
**** man must be hardware:s i hope not.
cant think of anything else but to send it back for repair
good luck
Every time I disconnect my phone from the pc, all usbs stop working (except the ones already working at the time (mouse, usb headphones)). I read somewhere that I have to go into the device manager and uninstall the now faulty SM Bus Controller, which is what's preventing the ports from working, then scan for new hardware to reinstall it, but that just hangs there... The only solution is to reboot the pc, which is a big pain in the...
Anyone have any clue what's going on here and how to fix it?
Alright, So I'm looking to help a friend get to the point where they can plug in their Droid 3 and it actually work.
Have plugged into every USB port, have installed the drivers Verizon reccomends installing for the device.
Basically we called up Verizon, and requested to get a actual OEM/Motorla cable. They sent a actual Motorola cable. Still doesn't work.
From what I understand the device has only been detected ONCE, and it was unsuccessful at finding drivers, now when you plug it in it doesn't even try to look for drivers. It just charges. gives you no options to mount or anything.
I've shot in and uninstalled alot of the drivers so it would cause it to re-detect and that attempt was unsuccessful as well. Uninstalled the Motorola driver application and did the same thing over, Uninstalled the USB drivers. Still nothing.
The device does run the most current version of Android, It is running stock. any clues?
perhaps try to manually install the drivers control panel/hardware/devices an printers
Have you checked the actual setting for the usb connection itself? Is it on charge only mode? Try a different computer if you can, if not, see if you can change the setting for when you first plug it into a computer, you should get the options of pc mode, charge only, media sync, and hard disk.
Sent from my DROID3 using XDA App
Jell - I'll shoot in and give that a shot if I can see if I can, Is i'll check for a driver package on the forums I guess see if anyone has one
Josh -- Not sure how to actually set the setting for the usb connection rather then when you plug it in and it asks for you to set it.
You plug it in and it charges, Doesn't ask what mode you want to put it in. Its like you're plugging it into a charger.
I have the same problem with connecting. My phone isn't recognizing that its plugged into a computer, it thinks it is plugged into a wall charger. It would be nice to know if anyone have figure this problem out.
Ok so I have a HTC Vivid and when i plug it into my computer it won't connect to it, only charges the device. I also have drivers installed, I tried chaging settings in connect to pc....I already tried different cables as well, I don't know what else to do.
P.S. Could it be the battery im using?
EDIT: It's not the battery.
EDIT 2: Ok so I uninstalled some broken drivers and got the syncing working.