Database Develop

[Resources] Flashing your First GSM Rhodium Rom (For Noobs)

PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS!!
IF YOU HAVE A CDMA DEVICE THEN GO *HERE* FOR INSTRUCTIONS ON HOW TO HARDSPL
IF YOU NEED TO HARD RESET OR ENTER BOOTLOADER YOU CAN FIND INSTRUCTIONS *HERE*
Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*
Any of these can lead to a bad flash and possibly brick your phone
*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS*
1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE
2. FLASH HARDSPL
The Original HardSPL Thread is *HERE*
IMPORTANT: Each user gets 1 license, or perhaps 2-3 on request if needed (valid forever and works as transparently as possible, so it won't be a problem at all)
you can send a request for 1-2 more devices for private user (free) at http://support.htc-unlocks.com (ONLY at this link, not in PM).
NOTE1: This package is for Rhodium (Touch Pro 2, not the original Touch Pro) devices. CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids), that will have its own HardSPL later. This HardSPL supports WM6.5
NOTE2: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
Flashing via ActiveSync with USB Lead (thanks to OliNex)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable and it must not be in Flight/Airplane mode (i.e. radio should be on)
3. NEW: Internet access is required as the program checks online for updates and license
4. Run Rhodium-HardSPL_V2_00R3.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). XP requires Admin logon and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, allow it. If you get an AntiVirus warning please ignore it, it contains no harmful code (just used a packer to compress it).
5. Follow steps as prompted in the HardSPL program. If this is the first run of HardSPL on a device after Hard Reset, you must select Automatic Flash Mode (first button in Welcome Screen)
NOTE: You should usually go for Automatic Flash Mode. The Manual Flash option is only to be used as noted below and you must only attempt the Manual Mode option if Automatic Flash Mode or SSPL-Manual.exe already put device in black screen. Any other errors triggered while running in Autoflash Mode will have to be fixed as instructed in the error message.
6. It will ask you to wait while it prepares for the flashing, press OK
7. Now it should go through without any error messages, if one does pop up then follow the instructions included in the error text. If no specific instruction is shown then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred)
8. At this point the phone hopefully went to a black screen (reporting version as 1.01.C-SSPL only using "info 7" in mtty), this is the SSPL version, which is temporary. Then RUU will instantly launch
9. NOTE: When RUU says it will Hard Reset do not worry, it is not going to do that. Also when it says the flash will take 10 minutes ignore that, it will only take a minute or so
10. SPL flashes, device automatically reboots, job done
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
NOTE1: This is unsigned HardSPL. No limitations on flashing ROMs (except of course some Radio roms). Also this has overwrite protection against HTC RUU's overwriting HSPL with a stock one. See steps in the Original thread about how to reflash stock SPL.
NOTE2: Anyone having USB problems with the device after it enters SSPL mode, download SSPL-Manual-Rhodium.exe, copy it to the phone and run it. Once the screen has gone black, run the HardSPL package on the PC and select Manual Flash option.
*IMPORTANT* Make sure that the USB cable is plugged in and device is synched to Windows Mobile even if doing manual method.
NOTE3: Do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! Nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. If you want to flash another rom then use shipped RUU or Rhodium customRUU if you want to flash cooked ROM.
3. DOWNLOAD AND FLASH YOUR PREFERED ROM
NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.
Flashing Via ActiveSync
1. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!!
3. Turn phone back on and wait until it syncs with your PC
4. Run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Turn phone back on and set up as required
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
4. FLASH PREFERED RADIO (OPTIONAL)
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Sync your phone with the PC
2. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
5. JOB DONE. Well Done YOU DID IT!!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

FAQ for Flashing your First Rhodium Rom
FAQ
1. What Operating systems are supported for Flashing HardSPL?
Supported OS versions: 32bit and 64bit XP, Vista, Windows 7RC and later. win2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. Also the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS software. Also version verify: if HardSPL package says V120R in first Welcome dialog title (and version 1.20 in About box) it is the latest version, not some crappy beta/old version.
---------------------------
2. Why is it recommended to remove the Sim Card and microSD Card before Flashing?
microSD Card removal is recommended just in case any self booting programs or UC setup files are on there that might interupt or conflict with the setup procedure after flashing.
Sim Card removal is recommended because as soon as your phone reboots after flashing your phone will be live and if you get a call or text message during the initial setup it might interfere and ruin the setup.
If you flashed with both the cards in it should be fine as long as none of the above situations happened. Just be aware for future flashes
---------------------------
3. What are the different types of Unlock? (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device (radios intended for your device only need Hard SPL) - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash Hard SPL instead. Hard SPL lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. The stock SPL's only let you flash signed ROM images that match the CID & Model of your device. N.B. the CID is the carrier ID (e.g. HTC__001, or VODAP100).
Also, SuperCID is setting your CID to a value that allows you to flash other signed (shipped) ROMs, even if the CIDs are different after removing Hard SPL. - SuperCID is performed by the Olipro unlocker.
---------------------------
4. What is the difference between ROM and RADIO?
The Rom is the operating system and included patches, tweaks and programs. The Radio is a seperate part of the firmware on the phone that handles all communation related matters such as signal, gps, bluetooth, camera, wifi and sound. Newer Radios to include improvements or fixes in older version, or even just to compliment an existing Rom or network so a newer Radio isnt neccessarily better. Radios also need to be matched to the correct Rom so you cant just put any Radio and Rom together.
---------------------------
5. How do Stock ROMS differ from Cooked ROMS?
Stock Roms usually have extra 'bloatware' added which take up extra space on the phone. Custom Roms are stripped down to provide more space and most are tweaked to provide a faster more stable Operating System. Every chef is different so you have to look around the forums to see which Rom is best for your needs.
---------------------------

Post #3 for mskip

Post #4 for mskip, just in case

Great post for people thats new

Nice one Mark.
Dave

i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!

slimsuse said:
i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!
Click to expand...
Click to collapse
Too true....I remember how scared I was when doing my first flash on my Wizard though. Somethin like this at the time would have put my mind at ease (would have probably scared me to death even more at the same time! ).
It's funny how, with experience, that fear fades away and you just flash as if you've been doing it all your life. Some people will learn the hard way...others will read, read, read like I did many years ago! (as they most definitely should)
Nice post mskip.

When flashing a new ROM via Active Sync, is it really necessary to remove the SIM-card and SD-card? I didn't and the flashing did go well. No problems at all!

Just extra precaution against wiping your cards out or God forbid getting incomming phone signal during flash and having that interfere!

slimsuse said:
i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!
Click to expand...
Click to collapse
Unfortunately flashing HardSPL on a Rhodium is a very in depth process and no shortcuts can be taken for the safety of the phone.The purpose of this guide is to give someone the whole process from flashing HardSPL to changing the Rom or Radio and save them having to keep 4 or 5 screens open with all the different information.
I remember when I first flashed my OLD Hermes many many years ago (god that makes me sound old haha) I was trying to pull all the information I needed together and ended up with over 15 pages all with different information and different methods on how to do the same thing and it took months off my flashing life.
I only made this up last night and the HardSPL information is taken directly from the creators thread. I will go through the HardSPL section and try to "dumb" it down so its easier to understand but if people want to customise their device then they HAVE to be prepared to follow all the steps to the letter and not complain that its too hard or too in depth.
This is the third one stop flashing guide I have written and the other ones have helped thousands of people flash their phones, the fancy fonts and colours are just their to help point things out
Any improvemants or additions are welcome (although my 10000 character limit has already been reached so if I add something then something else has to be taken off)

no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx

admix said:
no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx
Click to expand...
Click to collapse
Yes.
Dave

admix said:
no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx
Click to expand...
Click to collapse
Once you have HardPSL on your phone then you are free to flash Official or custom Roms as you desire.
Im sure the Touch Pro 2 is supported but if you are unsure in any way then ask in the developers thread.

Ok I've got a question. In the starting post is sais that the HARD-SPL is permanent. Is it really permanent, or can you change the HARD-SPL later on when updates are brought out?
I guess it is permanent in a way that it won't be removed after you reflash you device. But it can be altered right? (Because there are updates brought out for HARD-SPL also

quarintus said:
Ok I've got a question. In the starting post is sais that the HARD-SPL is permanent. Is it really permanent, or can you change the HARD-SPL later on when updates are brought out?
I guess it is permanent in a way that it won't be removed after you reflash you device. But it can be altered right? (Because there are updates brought out for HARD-SPL also
Click to expand...
Click to collapse
It means it cannot be replaced by a stock SPL. There is a flag in the Hard SPL to prevent it from being overwritten. You must use SSPL to change the SPL version - PS the relocker in the Hard SPL thread will revert you to Stock SPL if need be.
Dave

Mark, you forgot SD card Flashing - RHODIMG.ngh
Would you be able to add it when you get chance?
Dave

i flashed my first rom yesterday but didnt remove my sim or SD card
everything seems ok , can it cause problems?

DaveShaw said:
Mark, you forgot SD card Flashing - RHODIMG.ngh
Would you be able to add it when you get chance?
Dave
Click to expand...
Click to collapse
Sorry Master
When I was writing the guide I didnt see anything about microSD Card flashing so I thought it best to leave it out. Plus I knew that you would pick up anything I left out
I will add it to the Rom and Radio flashing steps but I totally maxed out my post already. Any chance you can bung me another 5000 characters I promise I will pay you back next week Failing that I will have to do some drastic rewording or spread the guide over the first 2 posts

combat goofwing said:
i flashed my first rom yesterday but didnt remove my sim or SD card
everything seems ok , can it cause problems?
Click to expand...
Click to collapse
microSD Card removal is recommended just in case any self booting programs or UC setup files are on there that might interupt or conflict with the setup procedure after flashing.
Sim Card removal is recommended because as soon as your phone reboots after flashing your phone will be live and if you get a call or text message during the initial setup it might interfere and ruin the setup.
If you flashed with both the cards in it should be fine as long as none of the above situations happened so I wouldnt worry about it too much. Just be aware for future flashes

HD MINI - MINI TUTORIAL UPGRADE ROM from SD Card (EU ROM)!!!!

I created a rom_CLEAN using OSKITCKEN. This is my first rom, and before you install, I tried a method of recovery for some malfunction. The SD card I thought it was the best. I found nothing, and after many tests I realized that the system is identical to the HTC LEO (HD2). The only problem was finding the file name to put on SD.
I noticed that in several HTC devices, the final part of the name is IMG. Some evidence and came to the name: PHOTIMG.nbh
TUTORIAL:
DOWNLOAD ORIGINAL ROM
EXTRACT (with WinRAR) File RUU nbh ...
FORMAT sd card in FAT 32 (as does HD2 2GB SD Sandisk)
COPY FILE to SD CARD
RENAME FILE RUU: PHOTIMG.nbh
SD CARD TO PUT IN THE PHONE
TURN IN BOOTLOADER (volume down + POWER)
VIDEO TO FOLLOW THE INSTRUCTIONS.
ROM (EU ROM) TESTED ON MY PHONE 100%
Photo attaching procedure OK
This thread is for informational purposes only. I am not responsible for malfunctions of your equipment.
UPDATE :
I was thinking how long ago this tutorial can serve .... for future applications ....
also in rom android .... do not go ia good successful in installation ....
as I said in post # 22 I attach link stock rom photon, most languages​​:
http://www.shipped-roms.com/index.php?category=windows mobile&model=Photon
I hope to be helpful ....Press Thanks button if my work has been useful to you

this could be userful to those that have problems with flashing roms

Of course! was the purpose for which I have done this research, and found this solution. I think and I hope it can use for more ....... Thanks!

great work done mate! just used ur tutorial and i made it work again. i think my mini had SOD or was bricked. now working ok so far.

Hi Scherk,
I am happy, my satisfaction is knowing that my work can be of help! Thanks......

Problem with the ROM for HTC mini
hello,
I need some help, I have the same problem that is solved by reinstalling the original ROM, but I can not find one from the HTC website, I contacted support and they said that my HTC is from Australia but there is no ROM for my HTC mini, these are my data :
HTC mini T5555
S/N:SH06SPZ01406
P/N:99HKN047-00
Please help me, thanks

rom australian
Hello,
In fact I have not found-ROM, the HTC site Australian. I do not know your problem, but if you can give definitive blocked a look at: http://forum.xda-developers.com/showthread.php?t=714598&page=2 - post 14!!
you can, I think, to try to install English ROM (do not know the required data for your Operator phone). you must have patience to be able to solve ...

Thanks!!!!, I will try later

does not work with this Rom, another idea?

Hi,
when i try to update my ROM by SDcard, after loading, checking , i have a error code like this 00028002 Not allow.

Hi,
But the upgrade is successful?
Flash only stock rom
Extract and copy again file.nbh
If the problem is to reboot:
If you've tried to do update, just once, try again.
If always the same error, try a different brand sd card.
I advise, as already mentioned, sandisk 2gb

Hi,
update is not successful, my SDcard is a Sandisk 2GB.
and i try different stock (Original) Rom find in forum like this one :
http://forum.xda-developers.com/showthread.php?t=860636
or this one :
http://forum.xda-developers.com/showthread.php?t=919987

I personally use a rom, cooked by me, derived precisely from the O2 ROM, and among those I cook,
I think is the best.
In my first tests, I tried to flash the stock rom O2,
and the upgrade is successful.
But of course the radio was not working .....
This method (SD CARD) is born from O2
However there are also many threads on XDA with your error code 00028 ....
Now what is the state of use, your hd mini?
You can attach photos of your screen?
My advice is still to use only stock rom downloaded from HTC OFFICIAL.

will 4GB sandisk work?

sandisk 4gb I do not know, you can try.
I tried it, 4gb sdcard from another vendor, but does not work.

thanks for the fast response. i'll try it.

Nice method!
Have tried it with stock ROM, all is OK.
But with custom one I get only "Loading..." at bootloader.
Is there any chance to do this with custom/cooked ROM?

I think it's not possible because we don't have HardSPL (there is only SoftSPL).

greek rom
hi i find the greek rom
http://www.easybytez.com/hdyouad17pa8
for all the greek out there with brick hd mini
ready to flash with this method
ps : danyboy

kostas.seres said:
hi i find the greek rom
http://www.easybytez.com/hdyouad17pa8
for all the greek out there with brick hd mini
ready to flash with this method
ps : danyboy
Click to expand...
Click to collapse
file is removed
i need this immediately. pls if anyone has it upload it for me.
tnx in advance

HTC HD7 flash help wanted

Hi guys!
I have an HTC HD7 phone, which was given to me (actually to my mobile phone magazine) about two years ago for writing review. It is a pre-production modell with test OS. It worked for some time but last year broke down, and I was not able to recover it.
Now I decided to give it one more try.
This time I tried upgrade through PC (USB connection is ok, but error code 269 at the end of the process - several ROM's tried) and goldcard method as well - but with no success.
This is written in bootloader:
**
Security Unlocked
SPL-0.93.2250.0(105296)
MicroP(LED) 0x06
TOUCH A1(v10)
nothing in green area (though there is card in the phone)
Serial in white area
**
USB connection works, and the phone can be put into USB host mode - so I think it must be some way to bring it back to life.
When I tried goldcard method the following tools were used:
2GD Samsung microSD
Kingston USB 2.0 microSD Flash Memory Card Reader FCR-MRB
Home made Y-cable
I followed the steps described in several threads here in XDA forum, but with no succes. The best result was that after connecting the phone in USB host mode "loading..." appeared on the screen, but some second later an error message came:
No image file!
(serial - written at the bottom)
What can be the problem? The pre-production ROM? Or should I use different microsSD card, card reader, or not home made Y-cable?
If anyone has an idea how to recover my phone please let me know.

My friend, no one from them will help you!! I don't know what exactly XDA is and how this community helps each other...
I registred here 1 week ago, posted 10 questions and asking for help or any guide how to restore/flash PVK key because my SD card is not recognized. I got only one answer
Okey bro. Take a look there:
http://www.mediafire.com/?dwkt6go38ibi2
And if you have EU phone then try to download these images:
1) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.16.401.01_R5.51.09.06a_22.30.50.09
or
2) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.69.401.01_R5.54.09.21_22.33b.50.10
Extract to SD and flash it from Hostmode.
Best regards

To install custom roms you need to install darkforce teams rspl/hspl to install custom roms. To use gold card you need to have the right image file,and it needs to be named specifically. Check for both of those in the htc hd7 development section.
Sent from my HD7 T9292 using XDA Windows Phone 7 App

silek65 said:
My friend, no one from them will help you!! I don't know what exactly XDA is and how this community helps each other...
I registred here 1 week ago, posted 10 questions and asking for help or any guide how to restore/flash PVK key because my SD card is not recognized. I got only one answer
Okey bro. Take a look there:
http://www.mediafire.com/?dwkt6go38ibi2
And if you have EU phone then try to download these images:
1) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.16.401.01_R5.51.09.06a_22.30.50.09
or
2) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.69.401.01_R5.54.09.21_22.33b.50.10
Extract to SD and flash it from Hostmode.
Best regards
Click to expand...
Click to collapse
Still getting the message "No Image File!". Any ideas?

crazy cat said:
Still getting the message "No Image File!". Any ideas?
Click to expand...
Click to collapse
Hi,
What is your devices info... Go to, Settings - About - More and post back devices Firmware Revision Number and Bootloader Version.
Are you trying to use the goldcard method to downgrade the devices SPL?

xdrc45 said:
Hi,
What is your devices info... Go to, Settings - About - More and post back devices Firmware Revision Number and Bootloader Version.
Are you trying to use the goldcard method to downgrade the devices SPL?
Click to expand...
Click to collapse
Hi,
It´s a prototype device named "HTC HD3" with this info:
HTC Schubert
OS Version: 6531.WM7_BldLab(mojobld).20100803-1911
FW: 0.93.401.1
HW: 0002
SPL: 0.93.2250.0(105291)
SOC: 2.2.5.0
Tried to upgrade SPL by goldcard, cause i´m getting an 269 error if i try flash by RUU.

deployment

Hi all
Id like to know if there is anyway that we can deploy apps onto a device that is "NOT UNLOCKED" if so , please elaborate
Thank you,

Chipsquirell said:
Hi all
Id like to know if there is anyway that we can deploy apps onto a device that is "NOT UNLOCKED" if so , please elaborate
Thank you,
Click to expand...
Click to collapse
no, not possible.
XAP deployment requires Developer Unlock or a Chevron Unlock at the least.

sh4d0w86 said:
no, not possible.
XAP deployment requires Developer Unlock or a Chevron Unlock at the least.
Click to expand...
Click to collapse
I have tried to unlock it using Chevron Wp7 but it doesent work , when i unlock chevron shows an eroor mesage that says "check weather zune is open and your phone is pin unlocked" and yes it is unlocked , please help me unlock my device , Here are my device details in case you might need them
Model: HTC HD7 T9292
Software: Windows Phone 7.5
Total storage: 14.63 gb
Available storage: 13.66 gb
OS version: 7.10.8773.98
Firmware revision number: 2250.21.51201.707
Hardware revision number: 0002
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.12.2250.0(139198)
Chip SOC version: 2.2.5.0
Thank you

Chevron Unlock will look work with pre-Mango. you will need to use Goldcard method to downgrade. I suggest just flashing a Custom ROM, you will get more features besides adding a few apps. see tutorial I wrote, link in my signature.

sh4d0w86 said:
Chevron Unlock will look work with pre-Mango. you will need to use Goldcard method to downgrade. I suggest just flashing a Custom ROM, you will get more features besides adding a few apps. see tutorial I wrote, link in my signature.
Click to expand...
Click to collapse
Thanks ill let you know how it goes

Bootloader downgrade
sh4d0w86 said:
Chevron Unlock will look work with pre-Mango. you will need to use Goldcard method to downgrade. I suggest just flashing a Custom ROM, you will get more features besides adding a few apps. see tutorial I wrote, link in my signature.
Click to expand...
Click to collapse
I cant seem to make the Y cable correctly , since i couldnt get the stuff from around my place i tried making one and it doesent work , Im pretty sure i made the Y cable like in the tutorial --> http://forum.xda-developers.com/showthread.php?t=1676794
is there anyway that i can degrade my bootloader directly from my computer without using the goldcard or Y cable method , or perhaps a ROM that can be flashed on a 5.xx bootloader?
Thanks in advance

Chipsquirell said:
I cant seem to make the Y cable correctly , since i couldnt get the stuff from around my place i tried making one and it doesent work , Im pretty sure i made the Y cable like in the tutorial --> http://forum.xda-developers.com/showthread.php?t=1676794
is there anyway that i can degrade my bootloader directly from my computer without using the goldcard or Y cable method , or perhaps a ROM that can be flashed on a 5.xx bootloader?
Thanks in advance
Click to expand...
Click to collapse
What errors or problems did you have when trying the goldcard method?
Since you have an HTC Asia WWE operator device, the SLSPL method by Ansar will not work for you.
The only other way for you to downgrade 5.xxx would be the Zubair - Pre-Mango Zune restore point method. Requires you to have a Pre-Mango restore point through Zune, meaning that you have updated the device from a Pre-Mango state to Mango and still have the computer that you did it on. If you use this method make sure to read the directions carefully... The devices SPL will not be downgraded when you revert back to Pre-Mango state, it changes the SPL when you re-update the device through Zune again and the key part is that the device will reboot twice during the update once to change the SPL to 4.xxx and once to actually install Mango and at this point you have to stop the update process and unplug the device before it installs the 3 update which is the HTC firmware update and if that update is installed the devices SPL will be upgraded to 5.xxx again and you will be stuck in the same position.
http://forum.xda-developers.com/showthread.php?t=1362194

xdrc45 said:
What errors or problems did you have when trying the goldcard method?
Since you have an HTC Asia WWE operator device, the SLSPL method by Ansar will not work for you.
The only other way for you to downgrade 5.xxx would be the Zubair - Pre-Mango Zune restore point method. Requires you to have a Pre-Mango restore point through Zune, meaning that you have updated the device from a Pre-Mango state to Mango and still have the computer that you did it on. If you use this method make sure to read the directions carefully... The devices SPL will not be downgraded when you revert back to Pre-Mango state, it changes the SPL when you re-update the device through Zune again and the key part is that the device will reboot twice during the update once to change the SPL to 4.xxx and once to actually install Mango and at this point you have to stop the update process and unplug the device before it installs the 3 update which is the HTC firmware update and if that update is installed the devices SPL will be upgraded to 5.xxx again and you will be stuck in the same position.
http://forum.xda-developers.com/showthread.php?t=1362194
Click to expand...
Click to collapse
Its stuck at Enter USB host mode
Thanks i will try that

xdrc45 said:
What errors or problems did you have when trying the goldcard method?
Since you have an HTC Asia WWE operator device, the SLSPL method by Ansar will not work for you.
The only other way for you to downgrade 5.xxx would be the Zubair - Pre-Mango Zune restore point method. Requires you to have a Pre-Mango restore point through Zune, meaning that you have updated the device from a Pre-Mango state to Mango and still have the computer that you did it on. If you use this method make sure to read the directions carefully... The devices SPL will not be downgraded when you revert back to Pre-Mango state, it changes the SPL when you re-update the device through Zune again and the key part is that the device will reboot twice during the update once to change the SPL to 4.xxx and once to actually install Mango and at this point you have to stop the update process and unplug the device before it installs the 3 update which is the HTC firmware update and if that update is installed the devices SPL will be upgraded to 5.xxx again and you will be stuck in the same position.
http://forum.xda-developers.com/showthread.php?t=1362194
Click to expand...
Click to collapse
Ahh , since my devide is having a semi bricked this method wont work on mine , when i go to the bootloader it does not show the "serial/USB" in the bottom. means its semi bricked

Usually if the device hangs in "USB host mode" its due too -
1. The SD card reader... Try a different card reader. This is the most common problem and if your card reader uses a USB cable (like a printer style USB cable) try a different cable.
2. Make sure the only file on the SD card is the SCHUIMG.nbh ( has to be capitalized when renaming the ruu_signed.nbh)
3. The camera button can get stuck pushed in and prevent the device from flashig
4. Try switching around the Y cable connections.
5. If you make the Y cable to long in length it can cause a problem with trying to read the file.
Also when the device gets stuck in "Enter USB host mode or Loading" you have to pull the battery and re-enter USB host mode to try and start the flash process again.
Try these and let me know how it goes.

xdrc45 said:
Usually if the device hangs in "USB host mode" its due too -
1. The SD card reader... Try a different card reader. This is the most common problem and if your card reader uses a USB cable (like a printer style USB cable) try a different cable.
2. Make sure the only file on the SD card is the SCHUIMG.nbh ( has to be capitalized when renaming the ruu_signed.nbh)
3. The camera button can get stuck pushed in and prevent the device from flashig
4. Try switching around the Y cable connections.
5. If you make the Y cable to long in length it can cause a problem with trying to read the file.
Also when the device gets stuck in "Enter USB host mode or Loading" you have to pull the battery and re-enter USB host mode to try and start the flash process again.
Try these and let me know how it goes.
Click to expand...
Click to collapse
Still stuck at Enter USB host mode , ive tried three diffrent card readers , still nothing happens

Chipsquirell said:
Still stuck at Enter USB host mode , ive tried three diffrent card readers , still nothing happens
Click to expand...
Click to collapse
What size SD card are you using? Make sure it's a 1gb card or if it's larger then partition it down to 1gb.

xdrc45 said:
What size SD card are you using? Make sure it's a 1gb card or if it's larger then partition it down to 1gb.
Click to expand...
Click to collapse
1.87 GB , ill partion it and see what happens , Thanks

xdrc45 said:
What size SD card are you using? Make sure it's a 1gb card or if it's larger then partition it down to 1gb.
Click to expand...
Click to collapse
i hat to say this , ive tried everything and nothing happens , "Enter USB host mode .. " thats how far my phone gets , ive shortened the wires , changed the ports i used , used diffrent card readers , used diffrent SD cards and nothing happens :l

[Q] Old HD7 need face lift.

Hi guys I found out that apparently I still have my old HD7 and if possible just a few questions. I deal with android stuf fand have 0 understanding about Windows but I am sure you guys can help me out. My question really on is there a root or jb needed to install cfw and in general what is available cause I don't really see ROMs like I see in my SGS3 section.
So if possible instructions on how to root following HD7 , and I think my sw and rom is really old ... here are specs I hope it's not too old yet usually old rom means better "crackability"
OS Version 7.0.7004.0
Firmware revision number 2250.09.12001.531
Hardware revision number: 0002
Radio Software: 5.51.09.11a_22.31.50.09U
Radio hardware version A.12.0.D4
Bootloader version 1.20.2250.0(111584)
Chip SOC version 2.2.5.0
I can believe I just wrote all this numbers
Anyhow just a hint what people prefer to use cfw wise ...like with sgs3 people like CM10 ....thanks is there cm for hd7 ?
Thank you guys !

Hi,
Yes you can unlock the HD7 and flash custom roms and there are plenty of them available.
There are no CM version roms for the HD7 though but there are some really cool custom OS 7.8 roms and are the most current available, that allow you to customize the size of the home screen tiles...like WP8 with the new start screen. With a custom rom you can, gain root access to the device, install/sideload unlimited homebrew/xap's to the device through a pre-installed xap installer on the device with IE, and much more.
And your right, the older rom/Firmware is easier to crack...and because your bootloader version is 1.20, you won't have to downgrade the devices SPL at all which is the hardest part of unlocking the device.
So all you have to do for your device is -
1a. Make sure you have Windows Mobile Device Center installed for Vista/7 PC or ActiveSync for Windows XP. Connect the device to the PC and allow the Qualcomm drivers to install. This allows for the PC to communicate with the device and install XSPL and flash a custom rom.
1b. Install XSPL (RSPL/HSPL) to the device. (Which is required to install a custom rom)
2. Flash a custom rom of your choice.
Just follow Shadows tutorial from step 17 and on. Download and install XSPL -
http://forum.xda-developers.com/showthread.php?t=1295068
I would recommend to read through the XSPL post and make sure that you understand the process as not to damage the device.
Take a look at the rom in my signature for the HD7....it's great and the one that I use.
This is a great rom for the HD7 too -
http://forum.xda-developers.com/showthread.php?t=1523991
If you have any questions or problems just let me know!

xdrc45 said:
Hi,
Yes you can unlock the HD7 and flash custom roms and there are plenty of them available.
There are no CM version roms for the HD7 though but there are some really cool custom OS 7.8 roms and are the most current available, that allow you to customize the size of the home screen tiles...like WP8 with the new start screen. With a custom rom you can, gain root access to the device, install/sideload unlimited homebrew/xap's to the device through a pre-installed xap installer on the device with IE, and much more.
And your right, the older rom/Firmware is easier to crack...and because your bootloader version is 1.20, you won't have to downgrade the devices SPL at all which is the hardest part of unlocking the device.
So all you have to do for your device is -
1a. Make sure you have Windows Mobile Device Center installed for Vista/7 PC or ActiveSync for Windows XP. Connect the device to the PC and allow the Qualcomm drivers to install. This allows for the PC to communicate with the device and install XSPL and flash a custom rom.
1b. Install XSPL (RSPL/HSPL) to the device. (Which is required to install a custom rom)
2. Flash a custom rom of your choice.
Just follow Shadows tutorial from step 17 and on. Download and install XSPL -
http://forum.xda-developers.com/showthread.php?t=1295068
I would recommend to read through the XSPL post and make sure that you understand the process as not to damage the device.
Take a look at the rom in my signature for the HD7....it's great and the one that I use.
This is a great rom for the HD7 too -
http://forum.xda-developers.com/showthread.php?t=1523991
If you have any questions or problems just let me know!
Click to expand...
Click to collapse
Thank you very much for your answer. I do have a few questions.
1. Windows Mobile Device Center is designed for W7 Vista and XP right now I am on Windows 8 ( I did download and installed Windows 64 bit version anyway)
2. There are 2 version of same file I see 2 downloadable files DFT_XSPL_WP7FG1 and DFT_XSPL_WP7FG2 yet inside both folders file that I need DFT_RSPL_WP7FG1_LAUNCH.exe is the same in both folders (i didn't check md5 but from looks of it it's the same file in both folders)
3. After connecting phone it starting to charge I see no errors, but after launching DFT_RSPL_WP7FG1_LAUNCH file and clicking next few times it's saying following error:
[Error Description]:
Please make sure that your device connected to computer.
also make sure that right drivers are installed (they comes with WMDC / AS usually)
Try to connect device to different USB port and also you can try to reboot PC.
[Info]: USBWorkRSPL.cpp (184)
I guess because it's not designed for W8. Now I have a choice to do Windows 7 compatibility and stuff but I'd like to consult with you first. I also have Ubuntu handy if it's possible to do it in there ? If impossible I'll just use my laptop and install windows 7 or xp or whatever needed. OR may be VMware on Windows 8 ? ,,,, Anyhow let me know what is my next move should be.
Once again thank you very much !
---------------- UPDATE ------------------
WHAT a No0B I am. Forgot to go in to Power + VDown mode ...... all worked out just fine I have RSPL3.1.2250.0(119314) instead of SPL Next stop ...flashing I guess

Another update all good with HSPL. On Step 38 of guide you provided, You v8 looks good downloading it atm will report on whole thing.
I also see it's possible to install additional card in to HD7, but in that tri color menu on bottom I saw it said SanDisk SD 16xxxxxx MB is that mean I already have extra card inside or it's just reporting on internal memory that showing as SanDisk SD card ?

ROM Downloaded and extracted.
On step 42 Guide mention that I should use task29 to flash my RUU_signed.nbh yet I do not see it included in guide as download link or in ROM pack however I do see ROMUpdateUtility.exe
I will try to find task29 cause ROMUpdateUtility.exe looks very much like official HTC utility that I guess at this point will not help me at all.

Yeah this is not clear. Task29 is for erasing completely everything on the phone yet it does not allow to select .nbh file. IS there a Task29 that designed for HD7 specifically and is there a separate flashing utility ? I think I'll wait for now for answer cause this is kinda important step I don't want to do something I don't completely understand and that guide needs to be fixed cause if Task29 is not for flashing yet only does first part of erasing everything it should say use Task29 to erase and use so and so to flash your .nbh file.
I'll wait for answer, Thank you !

ALL DONE !
Okay a little confusion was on that step because there is actually a custom wrapper for HD7 of Task29 utility and about it erasing everything, well that correct BUT if you have HD7_RUUWrapper_29.exe and RUU_signed.nbh in same folder it just automatically selects it and flash it to device so there are no prompts to select RUU_signed.nbh it simply flash it ... make sure to start HD7_RUUWrapper_29.exe as administrator.
Well done, thank you. Face-lift is not complete.

Awesome... Glad you got it all figured out and enjoy your new rom!!
I seen in one of your posts that you mentioned upgrading the SD card. This is possible, the SD card is technically a part of the file system once installed, therefore it requires a hard reset when installing the new SD card in the device, which will erase all data and apps.
You have to do some disassembly of the back of the device (it's pretty easy) to access the SD card slot.
Your device has a 16gb SD card already installed. With the bootloader version 3.xxx the device will support up to 32gb SD card. I have one installed in my device.
One thing to consider is that WP devices lock the SD card for security reasons and it cannot be read or used by any device or PC other than some Symbian devices.
These are the only methods to unlock the SD card. Flashing a different rom to the device (like Dynamics 7 Mango version which supports custom cabs) before removing the SD card and using WP7 Cab Sender and the Storage Lock Cab. (this is the method that I used) It's a app/program installed on the device that allows the device to unlock or lock the SD card and then allows the SD card to be used or formatted. The other method is removing the SD card from the device and using a Symbian device to unlock the SD card.
If your interested in upgrading the SD card there is a tutorial here -
http://forum.xda-developers.com/showthread.php?t=883582

Hello once again ! It's been few months sense I installed Deepshining v8 and it works just great. And just want to know if there is anything new out there that I can use. No updates to Deep so I guess development is not that hot anymore. Well thanks a lot for help from before and let me know if anything good is out that I can use instead of Deep 8
Thanks !