Database Develop

qtek 2020i ph10c screen will not align after hard reset

Hi i am new to this site so hello peeps...
Anyway i have had my qtek 2020i for about 3 months now and apart from the odd reset (that i have done) its been a useful tool.
Now the other morning it decided to have a freak out and the start menus locked up. I tried to do another reset but nothinge changed..
Now my dilemma is....i performed a hard reset and now the screen will not align...it asks me to tap to set up my device and i start tapping the little crosses but it will not work..i seem to be tapping the crosses for ever with no luck. Can anybody help?
thanks in advance.

Sounds like "Take it back to the shop" time to me.
Something far wrong mate.

Danny-B- said:
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Click to expand...
Click to collapse
spot on simple logic i suppose cheers geez

hehe, you could try a rom update or reflash, might be a problem with the rom

I got the new unit it was working fine......then i restored the backup that my last phone took before it went away and guess what....the problem returned :evil: .
Anyway i reflashed the rom with the qtek one and its sorted. :lol:
What is the best rom in your eyes for the alpine device?

The last O2 ROM with Pugs adaption, the 1.3 radio included.
Search for Pug it should come up with a link to his rom.
The newest O2 rom has an older radio version(1.0) because it has Blackberry support (which i will never use)

I am hardly recommend 1.04 radio version. It solved 3 issues for me and made my phone recieve signal better! This is "must have" version of radio!

I've kill Charmy...hope not forever

My friend have brought me MDA Compact II GER (IPL/SPL 2.06), i've tried to update it to WWE many times, but deutsch was still there. T-Mobile UK ship wrote me "Invalid Vender ID", lockwiz-lockwiz03a didn't help. Today, after flashing, it powered on, when i saw "tappen sie bitte..." i've became mad and made hard reset instead soft. Charmer powered off...that's all, no resets, no bootloader, no charging. What have i done! This is not hardware. Now waiting for fully charged battery. Any suggestions?
P.S Why after flashing Vlodec/Nocturne 004.4 great work with 1st method it was still Germanese

Charged battery brought me zero result, so this: http://forum.xda-developers.com/showthread.php?t=303257 is not my chance... By the way it attempts to power on from external power supply, but LCD is dark & there's still no bootloader.
Community, would you advise something for me, please.

well, if you did like it says in the other thread, power cable directly to the pins of the batery, probably your charmer is dead for real.
it happens almost the same thing to me. right now is in the tecnical assistence HTC, because in here Portugal i don't have t-mobile, they call me saying they can't do nothing here..afff
so i believe my charmer is realy dead...
by the way i upgrade from t-mobile end went dead...afff

Doul said:
P.S Why after flashing Vlodeck/Nocturne 004.4 great work with 1st method it was still Germanese
Click to expand...
Click to collapse
The rom did not flash at all. It is in english. Please Use 2ND method.

Well, thanx for advice, i'll try it, after Charmers resurection (if it possible), now i'm a customer at service (non official), but there's one problem: if boot-rise impossible, there's no flashers for BGA's in my city...

Touchscreen US?

Hi,
I bought a secondhand Herald a while ago, it is 4 months and came with the original invoice. I been using it for 2 weeks and whas very happy. For me a big improvement over my Qtek 9000. I encountered a few times when opening/closing the slider that the phone goes into softreset, looks like a pover interruption. But then after using it in my car with TT6 the phone froze up, a soft reset brought back life but now it does no longer respond to the touchscreen. Advice from HTC helpdesk, do a hardreset. Hard reset done and gues what...to activate windows mobile please tap the screen...Still no response. Before the hardreset the phone whas working normally except for the touchscreen, now its a brik...
I read that other people had the same, softreset while opening/closing slider, anybody any idea? Of course It has to go in for repair under warranty, but if it turns out that the P4350 is not very reliable I will sell it.
Hmm...I just realized that I posted in the wrong Herald section... if any of the
forum guys could place it in the correct section?
Yves

New P3600i sticks at splash screen

Bought it 5 days ago. When the battery went dead last night, I plugged it in to charge and switched it on .It did not go past the Windows Mobile splash screen. I took the battery out as well as the sim and memory cards, to no avail. I left it plugged in overnight and got the battery fully charged (battery indicator light is now green) and the network status green light would (at least sometimes) start flashing on boot, even though the phone would not completely boot up. I CAN get it into bootloader. What I want to know is, should I go to www.htc.com and download and install an official ROM from there, or should I leave all that alone and take it back to where I got it from before I screw it up? Additionally, the phone shows up as a Dopod D810 when registered on www.htc.com, and the radio and ROM versions appear to be lower/older than what came pre-installed in the phone. Advice anyone? I am fairly new and in the process of learning all this wonderful stuff you guys have to teach.

it seems like its already been fiddled with (correct me if i'm wrong people), i would visit the HTC club site and if you can upgrade using your serial number do that, as if you look in the trinity WIKI in "Trinity" forum (Not Trinity 6 forum, here) it states there is a different way to flash the p3600i as its setup different than the standard p3600.

This is exactly what happened to my phone when the battery died (after installing FInixNOver) Is there a problem with these ROMS, or something that happens when the phone dies!... My phone was also 'sticking/frozen/crashed' on the splash screen.
I just reflashed it with a new ROM after fully charging it again.

Thanks VISTAR. And WIZZKID - your phone works perfectly now after the flashing? And do you think it's because of the stuff you installed? BTW my ROM was an official HTC ROM. I actually got called out early this morning to do a flight to the island where I bought the phone (I am a commercial pilot flying Caribbean routes) and I packed it's backside back in the box and sent it to be exchanged. I don't have the new one yet, but I am beginning to wonder if I shouldn't try something else because of this problem of sticking at the splash screen - however I only have a choice of the Kaiser and the S730 at the moment. The P3600/P3600i is among my favourite WM phones of all times, but I don't wanna have to go thru this again. What do you guys think? By the way - I only just realized that I started this post in the wrong section, so please forgive me anyone whom is not pleased by that.

iF YOU HAVE THE CHANCE OF A KAISER I WOULD GO WITH THAT, ITS THE BEST OUT THERE AT THE MOMENT..

Yeah I know but I just don't like it the way I like the P3600i and some of the others. Besides I prefer no sliding hardware keyboard. Moving parts is an issue for me as I am very fussy about wear and tear/looseness. Thanks again for your help. I am gonna move over to WIZZKID's thread on this P3600/P3600i non-starting issue since I am in the wrong section of the forum. Thanks to all those who assisted...

Got a second P3600i and it did the same thing - a hard reset fixed the problem.

MTeoR crashes

I have a problem. After turning on the phone it works normal when use it, but when not using phone and screensavers goes on then after 20-25min. not works none of the buttons. Helps only removing battery. And after doing this 15-25 times it´s now wont booting up at all. Did´nt help anymore removing battery. It boots to WM bootscreen and then stops.
Is this tecnical or WM problem?
Sorry, my english is not so good.
And OS is WM5 and in the MTeoR startscreen is also is written:IU TEST ONLY. If I remember right, then it was started after installing the Kaspersky Mobile, but in the Qtek 8310 it works with no problems and allready 6 or more month.
Thanks for help.

Anybody

Did you try hard reset?

SOULTION
open regedit
verify the keys
HKLU\Control Pannel\Backlight
AC timeout 60
Auto Sendor 0
Battey timeout 5
HKLU\Control Pannel\Backlight
Lock Level
Display 0
On AC is also freesing?
Mine was freesing before i changed the BOLDED values
now is working fine

found the real problem
add or check
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
"SleepTimeOut"=dword:0000
"BattPowerOff"=dword:0000
"ExtPowerOff"=dword:0000
this solved the problem on VOX, MTeorR, Hermes
Best regards

Finali it´s repaired with same version of WM that was in phone.
In estonia pays puting new WM to pda or smartphone in HTC partner service 100€