Database Develop

[Q] Little help needed :) [FIXED] thanks :)

Hey guys.. it's me again..
With a little question..
i've searched for a solution and i found nothin unfortunately ..
Maybe it's me .. i don't know ..
Anywhore..
couple of months ago i unlocked the bootloader.. and i flashed A kernel ..
and did that over and over again.. last week .. i flashed Alfs.. i had some problems and bricks but i went through em easily thanks for Paul1989
But now.. i'm trying to flash nAa 08b ..
and unfortunately the flasher won't detect the phone ..
i know how to flash as i said before ..
i tried to do it on another laptop ... but nah ..
same problem ..
won't detect the phone ..
so i'm stuck at: connect the usb while holding the back button..
That's it ..
Hope u guys have some ideas ..
Thanks..
Cheers :
EDIT: i had a Problem with mounting the Phone to the pc.. but i solved it by installing the "Void" fix .. cause i have *alfs*
after that .. i could mount the phone..
so i thought now i can flash it ..
but .. NAH .. again .. it did NOT detect the phone :/

Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium

DeHuMaNiZeD said:
Plug your phone onto pc with battery out,hold the back button,then when youre holding it put the battery back in. Hope i helped
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
i Did that couple of minutes ago ..
it Did not work out ..
What a failure

Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium

nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.

B.Jay said:
nAa Kernel?
Well... let us try to diagnose the horse the other way around ...
When you connect the X8 in Flash Mode does Windows show the device as "SEMC Flash Device" in the Device Manager OR is it some "SEMC HSUSB Device" without a driver (yellow exclamation mark) OR isn't it recognized at all?
- If it's correctly recognized as SEMC Flash Device then Flashtool should be able to recognize the phone (assuming you're doing everything right).
- If it's mis-identified as "SEMC HSUSB Device" look around in the Forums - there's a modded Android driver that resolves this problem (this happens with one of the custom kernels ... I fail to remember if it happens with nAa or Alfs).
EDIT: Seems the misdetection only happens by chance with Alfs, but in case you experience that problem see this post.
- If it's not recognized at all ... check you're keeping the back button pressed while connecting the X8 to the PC until it's being recognized - check your USB cable - try another USB port - check your System for possible virii infections.
Click to expand...
Click to collapse
B.jay
unfortunately .. it isn't recognized at all..
and believe me i'm 100% sure Im doing everything right ..
now i have downloaded the file u've given me ..
let's see the results
Thanks
EDIT: What am i supposed to do with that file??
i thought it's a driver i can install.. but apparently.. it isn't..
Thanks in advance..
EDIT2: I already have alfs .. and i want to install nAa ..
And i have a detection problem .. i never had before using alfs ..
i guess you know that already.. said that just to clarify ..

DeHuMaNiZeD said:
Hmm...i dont know...****...
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Lol.. it's alright

Sira. said:
Lol.. it's alright
Click to expand...
Click to collapse
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.

yes ar .. flashtool

bogdan_mihai554 said:
Get the newes flashtool and reinstall flash drivers(They come bundled with flashtool)
It will work...worked for me.
Click to expand...
Click to collapse
And where can i find that flashtool?? there are plenty of flashtools in this Forum...
Am not gonna risk it, you know..
Link it up if u could
Thanks
EDIT: i have found the flashtools here http://forum.xda-developers.com/showthread.php?t=920746 ..
But how in the hell am i supposed to know which one is a proper flashtool for my x8??
EDIT2: Hold on a sec.. is that a flashtool???? It ends with FTF.. Not with EXE..
Damn am confused ..

linyaunam said:
yes ar .. flashtool
Click to expand...
Click to collapse
Wait.. What?

what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable

amu_cpln said:
what do u see in the device manger ?
keep the device manager open when connecting the phone
and see if there is a blink (refreshing) in there - for detecting a new device
what do u see on the phone .. does it enter boot mode
if all is right on the phone side .. but still no response on the pc side (no new device yellow mark or blink) check your usb cable
Click to expand...
Click to collapse
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..

Sira. said:
What device manager?????
excuse me man .. but i never heard of that.. or maybe i did .. in another way???
Click to expand...
Click to collapse
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
Sira. said:
What device manager?????
Also, as i said.. i've tried another laptop.. The same thing happened..
Did NOT detect the phone..
Click to expand...
Click to collapse
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
Sira. said:
What device manager?????
and i have to tell you that the device LED lights up Green.. that's boot mode i guess
But i don't know what's the god damn problem..
Click to expand...
Click to collapse
It will show up on the phone screen when it enters bootloader

amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Ooooohh that device manager ..
Alright .. okay
And yah i do have another USB cable .. i will test it right away ..
..
uhh okay .. sorry i missed up...
Wait for updates .. i will now test another USB cable

amu_cpln said:
The device manager is a list of hardware devices connected to the PC (in Windows)
If you are using windows .. type devmgmt.msc in the run prompt and the device manager shall open
that what makes me doubt your USB cable .. do u have another cable .. or another phone to test if this cable is working well
It will show up on the phone screen when it enters bootloader
Click to expand...
Click to collapse
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..

flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost

oktavianno said:
flash with x10flashtool .. enter bootloader andtflash it
_____________________________________
Samsung Galaxy Ace
CM7 7.2 Deodexed
zimage kernel + v6 supercharger + turboboost
Click to expand...
Click to collapse
Dude.. the flasher won't detect the phone..

Sira. said:
Alright.. i have some updates ..
i brought another USB cable..
opened the device manager..
And connected the device in flash mode..
so i found in the SEMS USB FLASH .. has an explanation mark on it..
Alright okay .. i uninstalled it.. connected the phone again..
so it installs the drivers again..
then after like one second.. it tells me that the device was not installed...
I don't know why..
Then again..
With the SEMC USB FLASH with the explanation mark...
Duh..
Click to expand...
Click to collapse
yes the exclamation mark says that you donot have proper drivers
search and install the latest drivers for your phone .. shouldnt have taht exclamation mark
the drivers should also come with your flash tool .. in the drivers folder ..
you can right click in device manager select update driver .. and point to teh drivers in your flashtool ..
if you dont have a copy .. search for new drivers elsewhere and install

Dude,how did you flashed the alfs kernel?
Sent from my E15i using Tapatalk

[Q] Xperia x8 bricked

Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !

This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.

yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now

lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.

also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)

Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289

yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone

Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way

lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.

eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!

use the update service

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!

how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel

Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.

X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...

Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D

Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum

I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA

eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped

Device Not Recognize

When i connected my mi410 to my lattop, the notification keep showing 'usb device not recognize'.
But, if i connected other set of mi410, the problem doesn't occured.
is it something happened to my phone?
is there any one could help?
P/S: i've already installed the correct usb driver on my lattop and it could recognize mi300 & other mi410.

tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro

install SUT LR flashing tool.It have USB drivers of our phone packaged with the software.It will help you .

dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share

ezio2 said:
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3). the other 2 set i tried is on Sharp Rom & also Edowar CM7
My lattop is running Windows 7 Ultimate.

vivekb said:
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.

Eric1665 said:
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Click to expand...
Click to collapse
seems to be a hardware problem with your cell maybe :cyclops:

ezio2 said:
seems to be a hardware problem with your cell maybe :cyclops:
Click to expand...
Click to collapse
what the.......argh..
is there anyway to solve it or flash back to stock rom?

Eric1665 said:
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Click to expand...
Click to collapse
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks

ezio2 said:
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
Click to expand...
Click to collapse
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..

Eric1665 said:
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Click to expand...
Click to collapse
Problem with your Windows / SUT installation...go to device manager and delete all device relevant USB controllers and other devices showing anything as "Qualcomm".
Uninstall SUT.
Restart windows, connect device and let it install the drivers first. Install SUT, install should go through without any issues and without prompting any error messages, in other words it should be complete uninterrupted install. Connect device and check if you see "a phone is connected"
Try with SUT 1.7 version also. Let us know if you still have any problems

[Q] x8 usb don't connect and anything drivers

I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )

samet.erdem.e said:
I installed Rom but without changing kernel. so my phone wait for sony ericsson screen. had been before and using SEUS previously had fixed. But now definitely does not open and also install any drive, USB not connected flashtool,flashtool drivers, seus .pc comp. does not work. because it does not respond to usb. what should I do
(in addition my english is not good. I hope I've expressed properly )
Click to expand...
Click to collapse
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!

BlackRabbit1703 said:
that is softbrick
many answers here..use search button
Try this method
- download the stock firmware from my signature
- flash it with flash tool
- wwaalllaahhh! DONE!
u get your phone on 2.1 firmware
make sure if u want to flash ROM!
see the requirements first!
Click to expand...
Click to collapse
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel

samet.erdem.e said:
okey ı can dowload stok rom but ı need with connect usb for use flash tool.
my computer does not see usb and seus.
ı cant install drivers so ı connect with usb its does not work.
maybe you say how my computer can recognize the usb device.
ı can ring back to orıgınal format and then ı can install the rom with kernel
Click to expand...
Click to collapse
Just install Gordon gate drivers It's in Drivers folder of flashtool I hoped.. Just advice..

install flashtool driver from C:/Flashtool/driver
x8 driver
gordons gates

if the above solutions won't work it is either the USB driver of your x8 that is not working anymore

How to Install SEMC_Signed Xperia X8 Drivers ?
Hey Guys, I am using Windows 7 and I am trying to install SEMC_Signed Xperia X8 drivers !! But i don't know where i install It !!
Help me

Serious problem.Phone not booting!

My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!

Maybe died flash boot

Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?

Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so

Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.

Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that

Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you

hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.

Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!

Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there

hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.

You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..

hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.

Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it

Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.

same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone

pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.