Database Develop

Clockworkmod recovery image from wildfire

I'm using rom manager and I like more the clockwork recovery image than amon ra's, especially cause I can rename the nanroid backups(with amon ra' s recovery image I didn't find a working way to do it)
The problem is that this recovery isn't permanend and only works from rom manager. And it's in flashable zip format and not img.
So, I searched to find an img format to flash it permanent.
And I found it in wildfire' s forum. I've flashed and works.
Here is the link:

It's good. I'll take this
Sent from my Tattoo using XDA App

dancer_69 said:
I'm using rom manager and I like more the clockwork recovery image than amon ra's, especially cause I can rename the nanroid backups(with amon ra' s recovery image I didn't find a working way to do it)
The problem is that this recovery isn't permanend and only works from rom manager. And it's in flashable zip format and not img.
So, I searched to find an img format to flash it permanent.
And I found it in wildfire' s forum. I've flashed and works.
Here is the link:
Click to expand...
Click to collapse
I hope that you can help me,
Could you please share the Wildfire's amonra recovery?
I really need it! Thanks!

No use asking for the recovery. Nowadays, you cannot flash a Tattoo ROM using wildfire recovery, it will give error due to non-matching system.

sunitknandi said:
No use asking for the recovery. Nowadays, you cannot flash a Tattoo ROM using wildfire recovery, it will give error due to non-matching system.
Click to expand...
Click to collapse
Sorry my mistake, I thought that he had a wildfire, I misunderstood the first post...

What you do not like the original clockworkmod recovery from Tattoo?

Ras recovery

Hey I was wandering I decided to flash ras recovery 1.62 instead of clockworkmods and I must say ras layout is much better however when I went to choose zip from SD none of my roms were there it was just the rootme.zip file I used to root and the original 2.1 Sprint ruu do I have to download everything again to this recovery or what
Sent from my HERO200 using XDA App

Bierce22 said:
Hey I was wandering I decided to flash ras recovery 1.62 instead of clockworkmods and I must say ras layout is much better however when I went to choose zip from SD none of my roms were there it was just the rootme.zip file I used to root and the original 2.1 Sprint ruu do I have to download everything again to this recovery or what
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Do you have them saved in a folder on your SD card?
Amon Ra will only see the root of your SD card. If they are in a folder just move them to the root of your SD card where the rootme.zip and 2.1 RUU are.

Bierce22 said:
Hey I was wandering I decided to flash ras recovery 1.62 instead of clockworkmods and I must say ras layout is much better however when I went to choose zip from SD none of my roms were there it was just the rootme.zip file I used to root and the original 2.1 Sprint ruu do I have to download everything again to this recovery or what
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
churchwin88 said:
Do you have them saved in a folder on your SD card?
Amon Ra will only see the root of your SD card. If they are in a folder just move them to the root of your SD card where the rootme.zip and 2.1 RUU are.
Click to expand...
Click to collapse
Correct, and I would use the 1.7 RA from Darch, much faster

Alright thank you I'm ditching Rom manager since they don't support the hero at all anymore other than the standard clockworkmod stuff I mean it is nice to be able to install without having to turn of your phone but ras recovery is much better than clockworkmod
Sent from my HERO200 using XDA App

And does anyone have the link to ras 1.7 I flashed 1.6 through Rom manager lol
Sent from my HERO200 using XDA App

http://forum.xda-developers.com/wiki/index.php?title=Hero_CDMA#Recovery_Images
Download the Unofficial Amon_RA v 1.7.
EDIT: Do you know how to flash a recovery?

Bierce22 said:
Alright thank you I'm ditching Rom manager since they don't support the hero at all anymore other than the standard clockworkmod stuff I mean it is nice to be able to install without having to turn of your phone but ras recovery is much better than clockworkmod
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Bierce22 said:
And does anyone have the link to ras 1.7 I flashed 1.6 through Rom manager lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
churchwin88 said:
http://forum.xda-developers.com/wiki/index.php?title=Hero_CDMA#Recovery_Images
Download the Unofficial Amon_RA v 1.7.
EDIT: Do you know how to flash a recovery?
Click to expand...
Click to collapse
No problem, did you get it ok?

I'm currently using 1.62. I have never updated recovery before, do I just flash over using "flash_image recovery /sdcard/recovery.img" via ADB? No need to uninstall or other preparations?

shilent said:
I'm currently using 1.62. I have never updated recovery before, do I just flash over using "flash_image recovery /sdcard/recovery.img" via ADB? No need to uninstall or other preparations?
Click to expand...
Click to collapse
That is correct

[Q] Easiest ROM to get on Captivate?

So guys, I need to know what the easiest ROM to put on my Captivate is. I'm rooted on the stock Froyo and I'm coming from the Aria where it was really easy. But, a couple days ago I bricked my Captivate and now have new one. And coming form the Aria I never had to worry about download mode (which I still don't quite understand) and bootloaders and Odin3 (which doesn't register my phone when my phone is in download mode, however, it registers it when out of download mode). So I need a good ROM that all I have to do is boot into CWM and install from SD card because thats all I understand as I have been doing that on my Aria. Please help me find the perfect ROM. Thanks so much. Love you guys here at XDA!

If you already have CWM, all you have to do is boot into recovery and choose install zip from SD card. This will work with any FroYo ROM.
If you don't have CWM you need to mod your recovery before you do anything.
You should be able to mod your 3e recovery from your computer, check the stickies for 3e recovery Modding, its really easy, and caries no risk of bricking.
Then, using modded 3e recovery you can flash CWM with an update.zip then flash a ROM.
Or, rename ANY froyo ROM "update.zip" and flash it directly from your modded 3e recovery. I recommend FireFly or Cognition personally.
Sent from my Captivate running Continuum 5.5

Yes, every Froyo ROM'S can be flashed with ClockWork Mod Recovery, you can download ROM MANAGER from market and you just touch "Flash clockwork mod" and then you have it, put the .zip files in your internal SD, and flash them using CWM.......

caddi234 said:
Yes, every Froyo ROM'S can be flashed with ClockWork Mod Recovery, you can download ROM MANAGER from market and you just touch "Flash clockwork mod" and then you have it, put the .zip files in your internal SD, and flash them using CWM.......
Click to expand...
Click to collapse
That is one way to obtain the CWM install file. But you still need to mod the 3e recovery before you can install the CWM recovery. Otherwise when you try to install it you will get the signature verification failure.
Sent from my Captivate running Continuum 5.5

how do I mod 3e recovery? Whenever I use cwm to reinstall packages, it says full signature verification failure. Or something close.
Sent from my SAMSUNG-SGH-I897 using XDA App

argonarcel said:
how do I mod 3e recovery? Whenever I use cwm to reinstall packages, it says full signature verification failure. Or something close.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Do some reading. Search for 3e recovery. There are a lot of threads on it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

go to the general sub-forum and look at the stickies at the top. There is a whole sticky dedicated to 3e recovery.

Ok. Thanks!
Sent from my SAMSUNG-SGH-I897 using XDA App

Clockwork Mod recovery

Hi, I recently rooted my Nexus One. Its all running great. Installed Rom Manager and used it to install Clockworkmod recovery. This is where my problem lies. The installation goes fine and I can boot into it he first time. But after that it doesn't work. I just an image of the android figure and an exclamation mark in a triangle. I have to remove my battery to reboot. If I reinstall clockworkmod recovery it works. But only once. Hen I get the same problem. Any body know what's wrong here. Its got me stumped. I'm afraid to install any Rom wig this acting so weird. Thanks for any and all help anyone can give.
Sent from my Nexus One using XDA App

Stock Recovery is persistent, i.e will overwrite CWM on every reboot.

How do i get around this then to make it stop overwriting clockwork?

Thwiipp said:
How do i get around this then to make it stop overwriting clockwork?
Click to expand...
Click to collapse
There's a script or something like that is preventing the CWM recovery from sticking IIRC.
You can get a script made by rugmankc
http://api.viglink.com/api/click?fo...b.tt/ooDaCnU&jsonp=vglnk_jsonp_13257843136922
Download the file and put on your sd card
After you install and boot into the CWM recovery the first time, flash that
Fix-Recovery.zip file

Thanks, I took a look at it, instead of running the script i used ES File Explorer and just renamed install-recovery.sh and recovery-form-boot.p and that seemed to do the trick. I was able to boot into CWM recovery 3 times in a row.

you should install super user or Custom rom

Im already rooted so I have super user. And I will be installing a custom Rom soon. Anyway, the issue is cleared up now, since I renamed those files.
Sent from my Nexus One using XDA App

Thwiipp said:
Im already rooted so I have super user. And I will be installing a custom Rom soon. Anyway, the issue is cleared up now, since I renamed those files.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
first install latest ClockworkMod recovery and after that as you inter the RECOVERY mod (first time) install the custom rom ...
fix it
http://forum.xda-developers.com/showthread.php?t=1112388

[Q] Changing from CWM to 4EXT Recovery touch

Hey,
I want (well not want, it's necessary) to change from CWM to 4ext recovery touch. i donwloaded the 4ext recovery updater, flashed the recovery from the app and rebooted to recovery. still there is cwm. i tried again with the classic version of 4ext recovery but the result remains the same.
i'd be glad if anyone can help me.
regards

If I'm not mistaken they are integrated..... Synergy!!!!!

i don't know what you're trying to say. my point is that 4ext recovery does not start when it should start. instead cwm is starting.

I'm trying to say that 4ext recovery is integrated into your cwm recovery to allow for 4ext partitions and backwards compatibility to 3ext. If the recovery isn't working you haven't told me that your original h-boot is 2.0000.

yeah right, i didn't told you that.
thanks for your help anyway. i managed to get it working by myself through flashing it via fastboot.

Good to hear no problem.

I am having the same problem. May I know what you mean by flashing using fastboot?
Sent from my HTC Incredible S using XDA App

xansavier said:
I am having the same problem. May I know what you mean by flashing using fastboot?
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
I asume you somewhat know how to use fastboot or read up on it. Havent flashed through fastboot for some time now but I think the line would be "fastboot flash recovery recoveryfile.img"
Sent from my HTC Incredible S using XDA App

thedarkjack said:
Hey,
I want (well not want, it's necessary) to change from CWM to 4ext recovery touch. i donwloaded the 4ext recovery updater, flashed the recovery from the app and rebooted to recovery. still there is cwm. i tried again with the classic version of 4ext recovery but the result remains the same.
i'd be glad if anyone can help me.
regards
Click to expand...
Click to collapse
what i did,downloaded v.1.0.0.3 rc,put the filenin the root of ur sd,then reboot to recovery..after that,just flash it like usual..install zip from sd card,pick the file and confirm install..it will automatically change from cwm to 4ext touch..
Sent from my HTC Incredible S using xda premium

@adde79
Yup. Will Give that method a try when I get home.
@zeroryuki
I tried flashing using recovery, it fails.
Sent from my HTC Incredible S using XDA App

Just my 2 cents,but you can't install core Droid with 4ext, so I have to wonder at it's advantage over cwm.?
Sent from my HTC Incredible S using xda premium

@adde79
Thanks, managed to flash to 4ext touch.
Sent from my HTC Incredible S using XDA App

Reflashed recovery on HTC Desire from CWM v2.5.0.7 to 4Ext v1.0.0.3 Beta 8
xansavier said:
@adde79
Thanks, managed to flash to 4ext touch.
Click to expand...
Click to collapse
Hi,
I don't know how you solved this, but I had exactly the the same problem with an HTC Desire, can't upgrade to 4ext from CWM v2.5.0.7.
In my case, I solved it by running unrevoked again, but specifying the 4Ext recovery image. (I used the 4Ext app on the phone to download the appropriate .zip to the SDCard, then transferred it to the PC and extracted it there.)
Julian

xansavier said:
@adde79
Thanks, managed to flash to 4ext touch.
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
No problem mate
Sent from my Incredible S using XDA App

Cwm to 4ext
how to change CWM to 4EXT on Inc S?
HELP....

wesly.btm said:
how to change CWM to 4EXT on Inc S?
HELP....
Click to expand...
Click to collapse
Go to 4ext.net, download 4ext recovery updater, install it. With it's help u will instal latest 4ext recovery
Sent from my Incredible S using Tapatalk

SandySemenov said:
Go to 4ext.net, download 4ext recovery updater, install it. With it's help u will instal latest 4ext recovery
Sent from my Incredible S using Tapatalk
Click to expand...
Click to collapse
Prefer via SlideME..

itsbeertimenow said:
I'm trying to say that 4ext recovery is integrated into your cwm recovery to allow for 4ext partitions and backwards compatibility to 3ext. If the recovery isn't working you haven't told me that your original h-boot is 2.0000.
Click to expand...
Click to collapse
Just came along this thread by accident.
Just for reference:
This is nonesense
4ext recovery has nothing to do with cwmr and they are not integrated.

You need to be s-off to be able to flash a recovery from inside your rom.
In the case you are not s-off, just download (or install) the recovery via recovery control/updater.
It will prepare your recovery config, but it cannot effectively update the recovery partition when you are not s-off.
So after you did that, you need to flash it manually.
You will find the recovery.img you tried to install or downloaded via recovery control in your sdcard's download folder.