Hi guys,
I'm really interested in flashing Revolution Rom to my SGS1. It currently has CyanogenMod7 on it.
I've looked at the instructions here: http://forum.xda-developers.com/showthread.php?t=1236432
but can't figure out if I'm meant to just flash the rom or if I somehow need to flash a stock Gingerbread first before then flashing the REvolutionROM.
Can anyone assist?
Apologies if this question's already been asked, I did a thorough search but couldn't find anything. Happy if you just point me to another thread if it's already answered.
thanks
Aaron
To revert from CM7 to any other samsung rom you need to first flash a full PDA stock rom with odin. with repartition. and 512 pit.
then you can change to what ever rom you want.
Bork84 said:
To revert from CM7 to any other samsung rom you need to first flash a full PDA stock rom with odin. with repartition. and 512 pit.
then you can change to what ever rom you want.
Click to expand...
Click to collapse
Hi Bork84, thanks for the reply. Where do I get the stock GB rom that will allow me to then flash RevolutionROM?
Am I able to just flash nandroid backup that I took before I flashed CM7? It's stock Froyo with Voodoo LF (rooted)
thanks
Hi mate u just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to closr kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
then download custom rom and put in ur internal sd and go to recovery or cwm mode and flash that rom.
Sent from my GT-I9000 using XDA App
Related
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.
Hello friends
I have searched and found a lot of threads but my obsession has not been solved.
I am on DDJPA indian GB flashed via Odin.I want to get back to stock froyo so that i can update to GB via odin.[Told u so!It is an obsession like having a perfect one!!! and i have a glimmer of hope that our Tab may get official ICS and i want it via kies but kies now does not recognise my Tab]
I have downloaded stock indian froyo[the one i had] from samfirmware.I have also downloaded flashing manual also from samfirmware.It says that i should flash pit file first with repartition and then remove battery & then go to download mode again to flash PDA tar file without repartition.
I am totally lost here.
I tried to flash with pit and PDA Tar file with repartition.It flashed successfully but when it boot was stuck at Samsung logo for about 30 minutes.[Should i have waited some more time at samsung logo flashing stage?]
Then i re-flashed with DDJPA GB tar with pit thro odin and revived the Tab.
Can anybody give me step by step instructions regarding how to flash via odin to get back to stock?
I want to go back to gingerbread am rinning Dark Knight rom any help plz
Why God .. why ...
Flash stock through ODIN or Heimdall and thats it
If you had to ask this, it's probably a good thing you're going back to stock.
Sent from my Telus Fascinate running OneCosmics ICS!
why would you say that
Get stock ROM here.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
You need stock ROM (3 file stock ROM), Odin & Pit512.
1. Start ODIN.
2. Select the files into the relevant places in ODIN.
3. Click repartition.
4. Put phone into download mode.
5. Connect phone to pc.
6. wait for Odin to connect to phone.
7. click start.
8. wait for ODIN to finish & for phone to reboot.
You must have pit512 and click repartition as ICS uses a different file system to Gingerbread.
You may have a boot loop after doing this. I have had this occasionally. To solve this reflash with ODIN. This time make sure repartition is unchecked and don't flash pit file.
Sorry Screen shot says scs. I meant CSC.
Hey peeps iv got a big problem it happened yesterday with my Galaxy note GTn7000. I was on stock ICS LPT and was flashing new kernels through CWM when suddenly my phone just kept freezing on the Samsung screen when I start it up and it has been happening since yesterday. I think it was the speedmod ICS kernel that I flashed that made this happen. I flashed Abys kernel through odin and could get in to CWM. I did factory reset/wipe cache/dalvik/cache and then flashed checkrom which was on my SD card. Installation was fine but then it got stuck on the Galaxy note startup screen. I was searching for answers on the XDA forums and someone suggested that you flash a stock full wipe GB rom. So I tried to flash LC1 open Europe rom and was waiting for an hour the the rom to flash through ODIN which had only a bit left on the bar to flash and it didn’t flash it just froze. I tried 3 times and the same thing happened . I have used the USB jig to erase previous downloads and reset binary count. I flashed ICS LPT rom through odin and it flashed normally but when it starts up it gets stuck on the Samsung screen. Any suggestions? I can get into download mode and CWM so it means Im in a softbrick. Do you think I should download an ICS rom and put it on to my SD card and then try flashing it ? Help would be appreciated thanks.
Here is the video of what happens. Basically i have waited for 4 hours yesterday and it just stays on the samsung screen
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Hey thanks i will download a new GB stock rom, i cant post the video link because im a new member dang...
azzledazzle said:
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Click to expand...
Click to collapse
Flashed N7000XXLQ2_N7000XXLPT_N7000CPWLP4_HOME.tar GB rom, it restarted and still the same. Freezes on the Galaxy note startup screen
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Thai Damen said:
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Click to expand...
Click to collapse
Im flashing through ODIN. I did the abys kernel flash before and installed a custom rom but it still kept freezing. Now i am downloading the XLA3 GB rom and hope to flash it through ODIN
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
IsmailZU said:
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
Click to expand...
Click to collapse
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its an .rar file. How do i change it into a tar file ?
Is it a rar. Or a zip? If it's a rar, re download from here http://forum.xda-developers.com/showthread.php?t=1424997 then extract one level with 7zip to get the tar file.
Sent from my GT-N7000 using xda premium
was in similar situation . flashed with ICS stock ROM after entering in to download mode as described here http://forum.xda-developers.com/showthread.php?t=1424997 using odin on laptop method. thanks
I would like to know if any mean, I could update or re-installed the firmware from external sd-card as there is a option. If there is then help me plz.
felix_0726 said:
I would like to know if any mean, I could update or re-installed the firmware from external sd-card as there is a option. If there is then help me plz.
Click to expand...
Click to collapse
If u mean official stock roms u can use mobile odin but 1st u've to root ur phone wif a safe kernal u can find it @ philz thread for N7000
if u want to flash a custom rom u just need a safe kernal u can find it @ philz thread for N7000
use the safe kernal do a backup for ur working rom b4 flashing any official rom or custom rom ! it might helps when things went wrong !
You are which rom Now?
BTW i will suggest flash stock rom via PC odin for pure stock
check the below thread for more information
http://forum.xda-developers.com/showthread.php?t=1424997
anoopva said:
You are which rom Now?
BTW i will suggest flash stock rom via PC odin for pure stock
check the below thread for more information
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
I currently using ICS 4.0.4 and would like to use JB. I am just trying to know if there is any means, we could able to use external sd card for the update as there is option...
if you are talking about the option is android recovery 3e then No. to install a new rom you need CWM recovery, Mobile odin or PC odin.
nokiamodeln91 is right, you need cwm , or Odin for flashimg new roms
if i download the german firmware JB and flash with odin, Will i get the update NEE? Do I need to have german CSC as well to install in in my GNote which is running NEE ICS 4.0.4
anoopva said:
nokiamodeln91 is right, you need cwm , or Odin for flashimg new roms
Click to expand...
Click to collapse
if i download the german firmware JB and flash with odin, Will i get the update NEE? Do I need to have german CSC as well to install in in my GNote which is running NEE ICS 4.0.4
no you will not get the NEE update. Only DBT updates.. if NEE JB comes out then manually update using odin. You can install any rom.
nokiamodeln91 said:
no you will not get the NEE update. Only DBT updates.. if NEE JB comes out then manually update using odin. You can install any rom.
Click to expand...
Click to collapse
Thank you!! I am installing right now. can't wait to test JB as samsung is taking long time to update in Finland.
once again thank you very much all of you.
Enjoy JB. But keep in mind that JB out of the box might not be smooth. You may need to root it and remove some boatwares.
anoopva said:
You are which rom Now?
BTW i will suggest flash stock rom via PC odin for pure stock
check the below thread for more information
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
I accidentally wiped out the internal memory @ ROM of my tablet ( Samsung SM-T330NU). It is now frozen on a download screen with the Android logo in the middle , I cannot turn it off or go into recovery mode with any of the usual buttons.
In addition, the PC doesn't see it, so I cannot use Odin either from the PC or the tablet.
How can I fix it? I thought I could download the stock firmware on the PC and copy it to the tablet external card, but I am not to sure how to do it. The stock firmware I was able to download is an MDS file. Can I copy it to the Ext SD card of the tablet as it is, or do I have to do something else?May be extract the files. How?
Thanks for the help
Ittiandro
Problem solved! . My tablet was able to connect to the computer with Odin and I could flash the Stock ROM . Never thought it would ! One of those wrong assumptions!
Thanks
Ittiandro