Hello all,
I recently unrooted my phone and ever since, I've lost my 3G signal and can't seem to get it back. Everything else, including wi-fi, works great.
Do I need to reflash? Or what can I do?
Thanks!
i gotta ask the obvious question.. have you factory reset? If not, do so.
do you test the *#*#4636#*#* menu, in phone information you can change or force your base band....
dial *228 or w/e the verizon activation number is and they will turn your 3g back on. you have to do it eerytime you use RSDlite. i thinks it's *228... but i could be wrong? idk google the number
Related
Yesterday my Milestone dropped the network and wrote "Only emergency calls". On other phones there was maximum signal. After a while the phone logged in to the network, but lost the signal again. I thought something is with the ROM, so I made a factory reset but didn't help. I flashed the correct SBF file (first Éclair, then Froyo), but didn't help. I restored an earlier MOD I used without any problem but didn't work.
I always used the German baseband files with other MODs because my Milestone is German.
The problem is that if I make anything (I mean anything related to the data connection), the GSM signal disappears, sometimes data connection remain with no problem, sometimes it is lost, too, but sometimes it has GSM signal with only EDGE network. If I do nothing, just turn off the screen and do nothing, everything goes back to normal, and the phone has normal data connection with GSM signal, I can make or receive phone calls.
I put in another SIM but the issue was the same.
Can I try something related to software and didn't try yet or this is a hardware failure? And if so, what is the price of a GSM module? I couldn't find it.
MOD: It seems that only the 3G is not working (sometimes HSPA does while 3G phone connection don't), with 2G there isn't any problem.
dial *#*#4636#*#*
Under phone info, try a different network type.
It probably defaults to GSM (auto). It does on mine anyway and it's fine.
But maybe WCDMA preferred, GSM only, or WCDMA only will work better.
It depends on which is screwing up... the WCDMA or the GSM
edit: had the dialpad code wrong... again.. geez
lordfreyr said:
Yesterday my Milestone dropped the network and wrote "Only emergency calls". On other phones there was maximum signal. After a while the phone logged in to the network, but lost the signal again. I thought something is with the ROM, so I made a factory reset but didn't help. I flashed the correct SBF file (first Éclair, then Froyo), but didn't help. I restored an earlier MOD I used without any problem but didn't work.
I always used the German baseband files with other MODs because my Milestone is German.
The problem is that if I make anything (I mean anything related to the data connection), the GSM signal disappears, sometimes data connection remain with no problem, sometimes it is lost, too, but sometimes it has GSM signal with only EDGE network. If I do nothing, just turn off the screen and do nothing, everything goes back to normal, and the phone has normal data connection with GSM signal, I can make or receive phone calls.
I put in another SIM but the issue was the same.
Can I try something related to software and didn't try yet or this is a hardware failure? And if so, what is the price of a GSM module? I couldn't find it.
MOD: It seems that only the 3G is not working (sometimes HSPA does while 3G phone connection don't), with 2G there isn't any problem.
Click to expand...
Click to collapse
Are you sure you have applied the correct baseband?
I would tell to re-apply thru AOR.
Sent from my Milestone using XDA Premium App
You could go to settings, wireless and networks and somewhere there there is use only 2g networks and if that is checked, you could try to uncheck it. That is what happened to me before on the froyo mod. Also, you could try turning on airplane mode, then turn it off. Good luck
I always used the German baseband, tried to switch 2G/3G many times, applied the baseband trough OR, applied the RTEU baseband, re-flashed the ROM, the original Éclair, the Froyo, again and again but nothing helped. I gave up I decided to go to the service. Before that on a forum somebody asked something, I gave an answer but I was not 100% sure about it, so I flashed the RTEU Froyo.
And it worked. The 3G, HSPA, 2G, EDGE, phone functions all are working now. My phone is truly German, it has QWERTZ keyboard and the original ROM was the ROM from Deutsche Vodafone (tried that one before, too), it has the logo on its box, and the German baseband files always worked. I don't know what just happened, it's simply working now. Why now... don't know.
I goofed big time. Bricked my moto g yesterday trying to get myself lollipop. It was stuck in a bootloop of some sorts.
I came home after a long day, and quickly fixed it not really paying attention to what I was doing, everything worked fine, I could text use wifi, etc.
Woke up. Tired to install lollipop again, didn't even stop to think about a backup(got the phone yesterday) and now everything works... BUT my network... The phone reads that there is a SIM card, it just can't connect.
I had to revert back to "stock" following some post on here, can't remember exactly which, except it used mfastboot.exe.
Now I'm on 4.4.4 rooted with TWRP, and if it helps i have the xt1064 model.
I must say this phone has probably been thoroughly wiped in just two days
TL;DR Phone reads SIM card, wont connect to network, "no service" -- XT1064 rooted with TWRP -- 4.4.4
Edit: If I try to make a phone call it tells me to turn off airplane mode.
Edit: In about phone, I have a phone number and an IMEI number, but mobile network and mobile netowrk type are unknown and mobile network state is disconnected. Service state is radio off for voice and data.
It has been few days that I lost network connection (3g,+H....).
I see 3g crossed when I turn off data connection, but when I turn it on, nothing is happening..no internet connection, and no sign shown. I have dual sim Moto G. I have try factory reset and playing with aero mode, *#*#4636#*#* service code, nothing help me. Wifi working is good.
OK, so I changed the radio band to USA through the *#*#4636#*#* menu. As I live in Europe I lost GSM coverage. I know I shouldn't have done it, but it was the only choice in the menu and to be honest I thought it referred to FM radio. Google'd it and went on to perform a factory reset as all my personal data was backed up. That fixed the GSM coverage.
But something new came up.
Now every time I restart the phone it keeps asking for pin even if it was in flight mode and after entering the pin it enables WiFi by itself.
Phone is running pre-rooted 242 lollipop with LB.
Is there something I can do in any of the props or anywhere to disable this behavior?
Thank you all in advance.
Sorry for bumping my thread, but does anybody know anything concerning this problem?
I decided to give Project Fi a try after the word came down about Verizon raising the rates for unlimited data plans. Long story short, it's not for me. The coverage stinks in the areas I travel. Battery life took a big hit due to it having trouble finding and keeping a signal. I thought it would be better having looked at the TMo coverage maps. Anyway, that's a different topic.
I hadn't canceled my Verizon account so I put that SIM back in and it seems like I am connected to Verizon's network again. All the texts sent to that number came through once the phone was turned on with the VZW SIM back in. However, I can't make any calls. I get an operator error about being unable to complete the call. The Cellular Network Settings only has a roaming setting. Don't have the Enhanced VoLTE option and the other things I had prior to switching to Fi. Did the *#*#4636#*#* thing to try turning the radio off and on, turning on the VoLTE provisioning flag, rebooted, etc. No change in my ability to make calls. Anyone have any ideas what I need to do to get voice calls working again? If it matters, I am on 5.1.1 LMY48T.
HankStorm said:
I decided to give Project Fi a try after the word came down about Verizon raising the rates for unlimited data plans. Long story short, it's not for me. The coverage stinks in the areas I travel. Battery life took a big hit due to it having trouble finding and keeping a signal. I thought it would be better having looked at the TMo coverage maps. Anyway, that's a different topic.
I hadn't canceled my Verizon account so I put that SIM back in and it seems like I am connected to Verizon's network again. All the texts sent to that number came through once the phone was turned on with the VZW SIM back in. However, I can't make any calls. I get an operator error about being unable to complete the call. The Cellular Network Settings only has a roaming setting. Don't have the Enhanced VoLTE option and the other things I had prior to switching to Fi. Did the *#*#4636#*#* thing to try turning the radio off and on, turning on the VoLTE provisioning flag, rebooted, etc. No change in my ability to make calls. Anyone have any ideas what I need to do to get voice calls working again? If it matters, I am on 5.1.1 LMY48T.
Click to expand...
Click to collapse
The solution is to go into the calls section of the dialer and disable the call assistant settings.
https://www.reddit.com/r/ProjectFi/...ing_between_verizon_and_project_fi_sim_cards/
OK, so I can make calls again by changing the setting above. But I am without simultaneous voice and data. Still missing most settings under Cellular Network. Any ideas on how to get that back? Is there anything I need to toggle in the *#*#4636#*#* menu?
I'm having the same problem. But the issue is my phone is operating In Ireland, I've never lived in the u.s but I don't have call assistant in my dialer settings...I have data and texts and can receive calls but can't dial out, I obviously don't have access to projectfi here in Ireland and it is installed on my phone but its disabled and always has been, really strange I flashed the ROM for marshmallow automatically suggested by NRT for my device, but I'm wondering if the rom I flashed was u.s. specific even though it didn't suggest that in the rom I flashed...it has me absolutely baffled.
HankStorm said:
I hadn't canceled my Verizon account so I put that SIM back in and it seems like I am connected to Verizon's network again. All the texts sent to that number came through once the phone was turned on with the VZW SIM back in. However, I can't make any calls. I get an operator error about being unable to complete the call. The Cellular Network Settings only has a roaming setting. Don't have the Enhanced VoLTE option and the other things I had prior to switching to Fi. Did the *#*#4636#*#* thing to try turning the radio off and on, turning on the VoLTE provisioning flag, rebooted, etc. No change in my ability to make calls. Anyone have any ideas what I need to do to get voice calls working again? If it matters, I am on 5.1.1 LMY48T.
Click to expand...
Click to collapse
This came up alot when the N6 was first released last year. You will need to factory wipe the phone, and then you will have full access to the Verizon network. There is an issue with putting in a Verizon SIM after using another carrier's SIM.. Not sure but it might have affected Sprint also. The posts are out there on XDA about this, if you dont trust me. You can search and find them.
http://forum.xda-developers.com/showpost.php?p=63403127&postcount=22
---------- Post added at 06:01 PM ---------- Previous post was at 05:55 PM ----------
HankStorm said:
OK, so I can make calls again by changing the setting above. But I am without simultaneous voice and data. Still missing most settings under Cellular Network. Any ideas on how to get that back? Is there anything I need to toggle in the *#*#4636#*#* menu?
Click to expand...
Click to collapse
make sure that your apn is correct.. if not fix it.
PaisanNYC said:
This came up alot when the N6 was first released last year. You will need to factory wipe the phone, and then you will have full access to the Verizon network. There is an issue with putting in a Verizon SIM after using another carrier's SIM.. Not sure but it might have affected Sprint also. The posts are out there on XDA about this, if you dont trust me. You can search and find them.
Click to expand...
Click to collapse
Sorry for the late reply. Life got in the way of me checking back on this thread sooner.
I believe you about the factory reset fixing it. Was just hoping there was an easier way so I don't have to setup my phone again. Perhaps the Marshmallow OTA will fix it but who knows when we'll get that. I'm tired of dealing with the signal issues I have as a result of switching back and forth so I'm going to do the reset. Just to confirm, this is the option under Settings > Backup & reset, right? Or is it something I need to boot into recovery to do?
The short:
I changed the "Select radio band" setting in the test menu (*#*#info#*#*) and it screwed things up.
I wiped and reflashed CM12.1 - but it didn't reset that setting (it's still borked).
Does anyone know where it stores that setting, or how to reset it somehow?
The long:
Initially in CM12.1 I was having problems staying on LTE - it always fell back to 3G and stayed there.
So tried this band change that someone who had the same problem suggested.
Now, every option I try is great for LTE but says "cellular network not available" and I can't make calls.
The exception is "Cellular" which I can make calls but only get 1X data.
These are the options in the menu:
"JAPAN Band (WCDMA-800/WCDMA-IMT-2000)"
"USA Band (GSM-850/PCS-1900/wCDMA-850/WCDMA-PCS-1900)"
"Cellular (800-MHz)"
"PCS (1900-MHz)"
I don't know what it was before and I can't see figure out how to tell what it currently is set to.
I just want to flash back to stock so things work again, but if this setting doesn't get reset then I don't know if that will work anyway.
Any chance settings like that are stored on the SIM card?
try to re-flash radio only
masterchapter said:
try to re-flash radio only
Click to expand...
Click to collapse
Worth a shot, but doesn't seem to have helped.
Try the instructions here: http://forum.xda-developers.com/showthread.php?p=57778872
I seemed to have luck when I made the changes according to this post and then immediately ran the ping test. I don't know if the ping test really did anything to help but I've had cell service since following these steps.
mh0520 said:
Try the instructions here: http://forum.xda-developers.com/showthread.php?p=57778872
I seemed to have luck when I made the changes according to this post and then immediately ran the ping test. I don't know if the ping test really did anything to help but I've had cell service since following these steps.
Click to expand...
Click to collapse
Unfortunately that's what I did initially. The setting in that link ("Cellular") made my calls work, but I could only get 1X data.
So somehow by just flashing and reflashing different things (including failing to reflash to stock), it's back to where it was when I started.... which sucks, but is at least useable. Calls work and data works, but the first time it has to drop back from LTE to 3G, it get stuck in 3G forever (until airplane mode). Super sucks since it's my primary home router tethered. I have to airplane mode like 5 times a day.
Just in case someone else ran into this problem, I ended up getting a new sim from Verizon and everything's working now finally. It still says "000000" when it's in 3G, but I don't care about that - it works and it goes back to LTE when it can, rather than staying on 3G forever.
Works for Moto X play - should work for others too..
I too did the same mistake. Changed my Band to "USA" and couldn't restore to previous despite Factory reset.
The SIM 1 went into 4G data only (No voice) , didn't recognize 2G & 3G network for any sim.
However Sim 2 worked fine for 2G,3G & 4G.
i came across a thread in XDA, and after breaking my head over how to execute it, I finally did it.
I have written a brief guide to it. Here's the link.
http://forum.xda-developers.com/moto-x-play/help/network-band-changed-to-usa-t3278614#post65991684