Hey
After trying to unlock my bootloader, it suddenly won't connect or charge anymore.. What to do? - It was going great untill the part where I have to open flash tool, then I tries to go into the "Plugins" but nothing happens.
This usually happens after people unlock their bootloader. I can't do anything now cuz I need to get to sleep (its 10:30pm) but I will give a proper reply tomorrow
sent from my x8 running gingerdx
let it charg for 4 hours , it worked with som1 i know
then start bootloader unlocking
Sounds good. Could you do a tut about what I should do to successfully proceed with the unlocking of the bootloader?
I do have a thread about bootloaders and kernels. And it has a link to a tut for unlocking bootloader
sent from my x8 running gingerdx
I actully got it connecting, and recharging, but now in flashtool, it won't recognize that my phone has USB Debugging on, but it does.. What could I do??
Related
Hi there!
Well, yesterday i tried to unlock the bootloader of my phone (running gdx v014). I followed the steps correctly and when it comes to the cmd i pressed a key and it said:
Getting Root Rights
*Daemon not running. Starting it now*
*Daemon started succesfully*
I waited for 15min and nothing happened. I close the cmd and open it again, and the next time it said:
Getting Root Rights
And it stopped there.
So i flashed a stock rom with the flashtool and then the baseband 015, this without problems.
And when i tried again, the same happened. So i wanted to check if the phone was still rooted, so i opened the superoneclick, checked for the updates, follow the steps and something smilar happened.
It said the same as the cmd for unlocking the device (the daemon part), and then it said:
Waiting for the device
And superoneclick crashed.
Hopefully my phone is still working, but i would like to know if there is a way to solve this.
Thanks!
Goodbye!
do u have all drivers installed? maybe something standing in device manager with yellow exclamation mark?
do you have pc companion installed ? if not, install it. and also check if you have usb debugging aloved in phone menu
For me the first time it stucked at the "Waiting for device", so i rebot my phone, close the CMD and the ADB.exe that it opened and then tried again and it was sucessfull
But check if the drivers are intalled and the PC Companion recognizes your phone
Ill try installing PC Companion, to see if my phone is recognized.
Goodbye!
EDIT: Installed PC Companion, Superoneclick didnt crashed and rooted my phone... Now ill try to unlock the bootloader.
Lobialkon said:
Ill try installing PC Companion, to see if my phone is recognized.
Goodbye!
EDIT: Installed PC Companion, Superoneclick didnt crashed and rooted my phone... Now ill try to unlock the bootloader.
Click to expand...
Click to collapse
we're waiting for your feedback
probably if you do all the steps to unlock the BL correctly you're now on the way of the sucess
if you get stucked at that again, do what i've sayed in the other post i've writen
RockitOut11 said:
we're waiting for your feedback
probably if you do all the steps to unlock the BL correctly you're now on the way of the sucess
if you get stucked at that again, do what i've sayed in the other post i've writen
Click to expand...
Click to collapse
Bootloader Unlocked!!!
Thanks for the replys!
Goodbye!
Hi.
I am pretty desperate and out of ideas with my X8 right now. I was just trying to flash in xRecovery this ROM: http://forum.xda-developers.com/showthread.php?t=1393520 , but my phone now is bricked. I know that its only for custom kernel, but I was just about to try it with the stock one. So when i have done flashing, I rebooted, and since then i was just stuck on boot logo "Sony Ericsson". PCC recognizes my phone but I cant access recovery menu. I was trying PCC and flash tool, and im stuck at step where its going to flash it. I hold back button as its written there, but my computer doesnt regognize anything (on the phone the green light shows on, does it mean that it is in flash mode? i really dont know, sorry). I have been searching around and i installed latest Gordons Gate (driver). I dont think so its hard bricked, because i´m having locked bootloader. Anyone can help me? I will REALLY appreciate it
ah..if it has SE then it still living ...use PCC
heres how i did it ..
1.enter PCC
2. click Support zone ( dont connect your phone )
3.wait for it to download (if i am right it will start a download? not sure)
4.at phone software update click start
5.it will say cant find phone then you click repair phone..
6.follow instructions =)
(DONT CONNECT YOUR PHONE YET )
at least you have a SE logo ...my phone got totally brick from unlock bootloader =(
next time try it with the kernel needed eh
use a flashtool to unbrick your device.
when you hold back button whilst plugging in and there is green light there still is some life in there. just do what has been said already.
thank you guys, i already repaired it with flash tool, my problem was that my computer doesnt recognized my X8 when it was in flash tool so i installed PC Companion, it automatically installed drivers and i could have done flashing
when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19
8cpaiw said:
when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19
Click to expand...
Click to collapse
Make Sure you PC have Gordon Gate Flash Driver Installed dude .
Download Here
8cpaiw said:
when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19
Click to expand...
Click to collapse
What exactly are you trying to do? Unlock bootloader? To get into your phone flash mode, you need to turn off your phone, then hold the Back button and plug in the USB cable at the same time!
If you previously able to connect your USB cable to your PC, you don't need golden gate driver. PM if you need further help!
saintckk said:
What exactly are you trying to do? Unlock bootloader? To get into your phone flash mode, you need to turn off your phone, then hold the Back button and plug in the USB cable at the same time!
If you previously able to connect your USB cable to your PC, you don't need golden gate driver. PM if you need further help!
Click to expand...
Click to collapse
He Just trying to Check whether His Phone Already Unlock BL Or Not.
If you previously able to connect your USB cable to your PC, you don't need golden gate driver.
Click to expand...
Click to collapse
I See, so No Need to install Gordon gate driver for flashing any SE Phone?
In My Case, Same Problem Happen to me before, But i install gordon gate Flash driver, it work fine.
thanks guys!!!
no my bootloader isn't unlcoked and i don't want to unlock it (because some guy tried to unlock his bootloader wizh 11W08 and all he got is HARD BRICK)
8cpaiw said:
thanks guys!!!
no my bootloader isn't unlcoked and i don't want to unlock it (because some guy tried to unlock his bootloader wizh 11W08 and all he got is HARD BRICK)
Click to expand...
Click to collapse
U're welcome dude
11w19? I think 11w19 is Safe to Unlock BL,
But just make sure of it.
Search for other sticky thread, and warning thread,
Before u done anything wrong.
Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Or just try Flashtool
i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..
leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium
Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.
My Xperia TX work normally on my rooted official rom
But after I flash this kernel
http://forum.xda-developers.com/showthread.php?t=2439557
My phone can't start anymore I can't even see the boot logo or access into cwm just the black screen :crying:
The only thing My phone can do is press volume+ when connect usb ,then the led will appear
I ever heard someone said it's fastboot or something but I dont know how can it help me fix my phone
Hope for someone help
Edit: Now my phone even worse the phone keep connecting to pc then said "usb cant be recognize" then disconnecting
and do again in a loop T-T
You flash a custom kernel to a locked bootloader and wonder why it breaks your phone....
Flash a stock kernel in flashtool or repair using flashtool or repair using pccompanion
EDIT
In future make sure you read the instruction on the OP, it clearly states in the requirements that an unlocked bootloader is needed.
Thanks bro