Database Develop

[Q] Need the rigth USB driver

Hi all,
Have a kind of brick at the moment.
Whats working:
Download mode
Recovery e3
The device is booting up, but I did the wrong battery mod for this firmware so it just vibrats and turns on and of.
The PC doesn`t recognize the device, it just sometimes shows up an unkowm device.
I have found this tread http://forum.xda-developers.com/showthread.php?t=777872 and now I have some hope!
I have tried to pick the Kies Driver (16 Shrewsbury) and all the others from Kies and also the google drivers from the SDK. But none from the works.
Someone can point me to the rigth driver, plase
Fortunately I still have my G1
Sorry for my English.

If you have a black screen after booting then try resetting back to factory settings in recovery mode.

Thank you,
I wiped al i could in recovery e3.
The device is booting up, sound is coming, I see even the SGS logo, after No package was found that provides the FACTORY TESTKEYS
I guess it´s becaus I aplyed the wrong battery Mod for my firmware

If your phone can go in download mode try to reflash a rom with odin

I allways extract the latest kies install file to hdd and pick the latest drivers setup package out of it. I NEVER installed kies just to get some drivers
Sent from my GT-I9000 using XDA App

stuck on samsung logo

hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks

nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
put your phone in download mode , and use odin to reflash a stock rom...then start again

thanks for reply. how can i reflash into stock rom is there any link where it shows the tutorial ?
thanks

nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
Flashing Video Guide for Stock XXJVU

now another problem comes in phone is not going into download mode?
could that b cause of battery gone down to less then 20%?

Your battery should be at least 50% before flashing.

i m not sure at the moment it was 90% before. my phone was going into download mode but i did 1click downloader and instaler at&t firmware and now its not going into download mode ??

You could try this nbkhan : Download Android sdk (google it as i cant post external links in forum yet)
Extract this at the loacation c:\AndroidSDK
Connect phone to PC and Install Drivers
now go to Start > RUN > type cmd
go to this directrory " c:\AndroidSDK\tools "
now type " adb reboot download "
Your phone will reboot and will go into bootmode.
You could also consider building or purchasing a usb jig(google it)

pc does not recognize my phone.

Were you were flashing an ics rom? if so you need nexus drivers installed on your comp which can be found here : w w w.multiupload.co.uk/BUCFT8M42N

hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.

nbkhan said:
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
Click to expand...
Click to collapse
You could try the one click unbrick from here : http://forum.xda-developers.com/showthread.php?t=1153310 , if that does not work you will have to buy/make a usb jig to force download mode.

Jigs are well worth the money, just a couple of £/$ and save your phone.

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q] [q] galaxy ace bricked flashing cm7! Help please!

Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!

archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.

Paul Koty said:
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Click to expand...
Click to collapse
I tried installing Cyanogenmod 7.2. And err, is there any other way of trying to restore the phone instead of the USB JIG, cuz I don't have any. :/
I've already tried to go on the download mode by the steps you just said (power button+vol up./down + home), but the phone seems to be dead, it won't turn on in normal mode, download mode nor recovery. As the phone won't start in the download mode, i'm not able to flash anything via ODIN.
Is there anything else I could try? What if I try to flash STOCK ROM via ADB to SD CARD using ANOTHER CELLPHONE?
Thanks for helping.

Ah, another important info is that I think the phone "died" with the USB Debugging deactivated, so I think that's why the ADB can't recognize the device, right?

archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Try, to downnload the drivers of the SGA, in the samnsung page, if it works, use a stock rom that don´t be a one package. Sorry for my bad english.

Wrong section!
Use Q&A Thread the next time
Can you boot into CWM?
If your device is still valid warranty send it
for service

[Q]What should I do? (Bricked Phone)

Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?

DanuTzCarbon said:
Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?
Click to expand...
Click to collapse
Sorry my friend only samsung can help you!!!
Sent from my GT-S5570 using xda premium

uninstall your kies. then install samsung usb driver.
then odin your phone.

dzeig said:
uninstall your kies. then install samsung usb driver.
then odin your phone.
Click to expand...
Click to collapse
I can't enter Download Mode and I haven't KIES installed.

Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.

boot.img is not bootloader,

Boot.img is kernel
Tapnięte z mojego mini 2

MrMateczko said:
Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.
Click to expand...
Click to collapse
Well, I installed Kies.
I can't use "Emergency firmware recovery" because my PC doesn't recognize my phone.
I can't use "Firmware Upgrade and Initialisation". When I enter the details about my phone I get "'GT-S6500D' does not support initializing.".
I don't think I have other option in Kies...

Another problem:
My phone is absolutely unresponsive.
Maybe because of battery.
I can't charge it. I have a friend with S6500D...
I will try with he's battery.
Maybe I could try some tricks to enter in Download Mode. (God, please help me!!)

Instal drivers and go to download mode !
Tapnięte z mojego mini 2

hheelloo said:
Instal drivers and go to download mode !
Tapnięte z mojego mini 2
Click to expand...
Click to collapse
I have drivers. Isn't that the problem. And I said I can't enter Download Mode.

Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop.

darkshadow1997 said:
Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop or flash stock rom with bootloader removed link:http://forum.xda-developers.com/showthread.php?t=1551586
Click to expand...
Click to collapse
Thanks for the advice.

Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.

If boot.img is not the bootloader (it's the kernel, I'm sorry for telling you wrong before), then why the Download Mode does not work?

darkshadow1997 said:
Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.
Click to expand...
Click to collapse
It doesn't matter... I saw it was for Mini... Anyway download mode still not working so don't worry.
Thanks for the idea of stock firmwares without bootloader... maybe i could edit stock firmwares for my phone.

You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.

darkshadow1997 said:
You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.
Click to expand...
Click to collapse
Well... my brother know a guy who know another guy. This guy have a service or something like that. I sent the phone to him. Maybe he could do something. If not... I will try to find the famous Usb Jig for my model of mini. I found for GT-S5570 but still searching for GT-S6500D

Fixed
Well... I sent my phone to a service but there they could only fix download mode. LOL. They tried to install firmware update, but the phone was stuck in bootloop. From there, I fixed by myself.
I will ask them how did they fix it.