Database Develop

Loopy Smothness

i tried to flash loopy smoothness using cwm but install abort every time i try. has anyone install it successfully? maybe you can point me to the right direction. been looking around but cant find anything. im running Liberty3 v1.0, synergy on liberty theme, and v6 supercharger.

[Q] Bricked w8! :( Reason - v6 supercharger or busybox installer??

i was using w8 with PrimeHD 6.0 on stock kernel , installer busybox new version through buzybox installer , install v6 supercharger and ended up bricking my phone... now who out of the two is responsible n please help me in installing v6 supercharger i really wanna experience it

What version of busybox did you install? Because if you installed the latest version that is what caused the brick. It has been mentioned in the supercharger thread that it is not compatible with newer version of busybox. So you have to have an older version of busybox( I don't remember which one probably 1.18 or below) and then install supercharger script.
sent from my x8 using xda premium

ronnie-steelheart said:
What version of busybox did you install? Because if you installed the latest version that is what caused the brick. It has been mentioned in the supercharger thread that it is not compatible with newer version of busybox. So you have to have an older version of busybox( I don't remember which one probably 1.18 or below) and then install supercharger script.
sent from my x8 using xda premium
Click to expand...
Click to collapse
i installed 1.19.x ... may b thats the reason but watsoever now its recovered n will again try acc to ur suggestions

bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now

manishmalhotra said:
bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now
Click to expand...
Click to collapse
Some roms u can not update busybox
and u will end with soft brick if u try to do so
it's not supercharger at all

semdxd said:
Some roms u can not update busybox
and u will end with soft brick if u try to do so
it's not supercharger at all
Click to expand...
Click to collapse
now what should i do...!!! request haka to help including v6 supercharger in PrimeHD

manishmalhotra said:
now what should i do...!!! request haka to help including v6 supercharger in PrimeHD
Click to expand...
Click to collapse
I didn't like supercharger it doesn't make any difference
Install it with any busybox but it's not recommended

manishmalhotra said:
i was using w8 with PrimeHD 6.0 on stock kernel , installer busybox new version through buzybox installer , install v6 supercharger and ended up bricking my phone... now who out of the two is responsible n please help me in installing v6 supercharger i really wanna experience it
Click to expand...
Click to collapse
Superchanger working for me, make my x8 better than before, i use busybox 1.19, and stock kernel
Sent from my X8 using xda premium

topol89 said:
Superchanger working for me, make my x8 better than before, i use busybox 1.19, and stock kernel
Sent from my X8 using xda premium
Click to expand...
Click to collapse
which rom u use?? do u use ram manager pro?? and at what frequency have you overclocked your device?? m asking all this because if these things match and u still feel your x8 is better than i ll definately install v6 by hook or by crook

manishmalhotra said:
bro... is updating busybox safe? i have read some threads sayings "once installed, busybox should not be updated " i have version 1.15.xx installed n v6 says it requires 1.16.xx .... what should i do now
Click to expand...
Click to collapse
If your busybox is below v1.16.2 you should use v8 supercharger which can be found in the same thread where you find v6 supercharger..it should work for you..but I have used v6 supercharger for several months when I was on GDX v22- even on stock kernel which have busybox v1.15.3 and worked like charm..but don't try the kickass kernelizer script on that version of busybox which will brick your phone for sure..but of course it may have a different result on yours but as I say "It worth to try"..but as I suggest try v8 Supercharger script for a safer result..
Sent from my X8 using Tapatalk

MiniCm7/Minicm9 supercharger work perfectly No Softbrick.
zeppelinrox has mention that if you phone doesnt want boot,
Pull you battery out, on again.
Atleast 3 times. If it was still the same problem.
Then IDK. LOL.

manishmalhotra said:
which rom u use?? do u use ram manager pro?? and at what frequency have you overclocked your device?? m asking all this because if these things match and u still feel your x8 is better than i ll definately install v6 by hook or by crook
Click to expand...
Click to collapse
i use PrimeHD rom, not use ram manager pro, not overclocked, just use superchanger v6, it makes my x8 better than before

sandy_tea said:
If your busybox is below v1.16.2 you should use v8 supercharger which can be found in the same thread where you find v6 supercharger..it should work for you..but I have used v6 supercharger for several months when I was on GDX v22- even on stock kernel which have busybox v1.15.3 and worked like charm..but don't try the kickass kernelizer script on that version of busybox which will brick your phone for sure..but of course it may have a different result on yours but as I say "It worth to try"..but as I suggest try v8 Supercharger script for a safer result..
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
ty bro installed v8. will take some time to see the difference as my present rom is already really smooth with other tweaks, overclocking and ram manager

[edit]
This was probably a wrong section to post. I opened a new thread at Q&A about Unbricking Teclast P85 after installing busybox 1.19

[Q] what is the fastest ?

am just asking for the fastest & stable ... dont give me an answer that tells you have to try & what am i looking for bla bla bla
what is the fastest stable rom ?
Kernel ?
I/O Scheduler ?
Governor ?
Voltage ?
any other setting or apps that will help ?
PLZ PLZ
just give me the fastest & stable no need to tell me more ... simple & thakns

Recommend. Miui!!!!! ( made in China )

jaln1987 said:
Recommend. Miui!!!!! ( made in China )
Click to expand...
Click to collapse
whats that got to do with my question ?

Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP

gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
keep on restarting & force closing
although i wipe everything before installing ..... ???
any idea ?
& i cant find SIO ... only noop & deadline & simple I/O
same is for the LMK

gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?

Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2

You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2

asoom69 said:
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Click to expand...
Click to collapse
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP

I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..

adytum said:
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
infinitum is great but in some games & apps its slow
thats why am looking for a very fast rom & kernel >>>>>

gsw5700 said:
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
Click to expand...
Click to collapse
i set it to smartass but still no sio ... not a big deal ok ...
but all these is from smerphone app ... when you go to nstools there is much less option & the highest cpu is 1000mhz
mean while in smerphone you can get it up to 1300 mhz but as soon you leave the apps it goes back to 1000 ... but every other setting stay as i choose ... & when you try to make the profile default as your profile the phone completely shut down
so i did as most of people think which is the fastest ... but still 2 things i cant do
sio
highest cpu ( 1300 ) am stuck with (1000 )

scubadude said:
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it

Calient_Boy said:
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
Click to expand...
Click to collapse
i am on same rom and it never gives that issue, you may try low space warning msg fix.
Sent using i9000 running Doc's Master 4.0.4

asoom69 said:
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Click to expand...
Click to collapse
goto ass>performance>free memory> you can use it as lmk
Sent using i9000 running Doc's Master 4.0.4

[Q] SuperChargerV06 vs Adrenaline vs Seeder entropy generator

Can some one please tell whats the difference between SuperChargerV06 and Adrenaline ..Although both of the them are meant for performance improvement ,i would like to know which one is better. . And how are these both different from Seeder Entropy. Can we use any combination of the above ??

tulasiram.neelam said:
Can some one please tell whats the difference between SuperChargerV06 and Adrenaline ..Although both of the them are meant for performance improvement ,i would like to know which one is better. . And how are these both different from Seeder Entropy. Can we use any combination of the above ??
Click to expand...
Click to collapse
As you'll find from reading this site, everyone has an opinion. These vary greatly. Some don't even "tell it as it is" and prefer to make themselves look superior to others by basically lying..
Best you carry out your own research and find what's best for your system. Post your results here to inform others!
Cheers..

tulasiram.neelam said:
Can some one please tell whats the difference between SuperChargerV06 and Adrenaline ..Although both of the them are meant for performance improvement ,i would like to know which one is better. . And how are these both different from Seeder Entropy. Can we use any combination of the above ??
Click to expand...
Click to collapse
1-Adrenaline boost is for GPU acceleration (graphic processing unit)
2-supercharger boost your ROM with some Tweaks like increasing RAM memory, improve responsibility,etc...
3=They are two different tweak & you can use them together
backup then try them ,cause it's a little bit hard
sent using" ultimate - ics - standard"

I myself use supercharge and seeder both combined and it works as charm..
sent from my phone using hands and brain...

tulasiram.neelam said:
Can some one please tell whats the difference between SuperChargerV06 and Adrenaline ..Although both of the them are meant for performance improvement ,i would like to know which one is better. . And how are these both different from Seeder Entropy. Can we use any combination of the above ??
Click to expand...
Click to collapse
Well Seeder can be enabled for both the tweaks!! And If You running on JB you might have a problem while patching the services.jar, as in after you patch them, after a while the services.jar stops to work and ur phone is stuck!! So i suggest Ram manager PRO!! if u runnig JB or else supercharger works like a charm!!

Bunny2rock said:
Well Seeder can be enabled for both the tweaks!! And If You running on JB you might have a problem while patching the services.jar, as in after you patch them, after a while the services.jar stops to work and ur phone is stuck!! So i suggest Ram manager PRO!! if u runnig JB or else supercharger works like a charm!!
Click to expand...
Click to collapse
thanks for the info..am running GB and installed it last ni8..satisfied with the way things are going :good: Thanked

[Q] performance package?

i have sgm running xtreme g v2 rom. recently i've been looking for a good performance package...i tried slaidyboost
but it doesnt seem to be effective...i've heard of pimp my rom, supercharger v6. which one is the best? if anyone knows
about any other ones also pls inform.
also can any performance package work on any rom?
PS pimp my rom is an app. can i use it along with any of the above mentioned scripts
at the same time?
thanks!

pimp my rom is like v6 supercharger script
almost all tweaks are same, it is just that pimp my rom is gui and v6 supercharger is a script
there is universal lag-free script, adrenaline