Related
I'm not sure exactly what's causing this but, it seems that all the files get an extra . at the end. The result is that everytime I want to sync, it'll want to kill all the files and reupload everything.
Anyone else try doing this? I haven't experimented much yet because it took a really long time to transfer everything (almost 4gb), most of the files which were also transcoded, and I'd rather not do it again.
It could be a problem with either the htc audio player or the windows media player doing it?
I'd like to keep using winamp because I have a good system set up. Songs with a 0 rating don't get synced to anything. 1+ to my ipod. And 4+ to my phone.
is the winamp service still in beta? i tried it a while back and didnt get too deep. let me know your results when you get done messing around. I am looking for a good setup to stream my mp3s from my pc.
I must have been a bit vague. I wasn't trying to stream mp3s to my phone through winamp. I was trying to sync part of my media library to it.
oh, well i dont have this problem. files get copied fine.
BUT theyre copied to the device. is it possible to copy them to the storage card?
All,
Not sure what happened, but all of a sudden when I get an incoming call there is no volume on the ringer. If I switch to vibrate it will vibrate when a call comes in. I went to Settings-Notifications and confirmed there is a ring tone selected and I can play a test of it. Is there some other hidden setting I am missing? FWIW I am also running Goodlink 4.9 although it hasn't in the past caused any problems. Thanks.
I have also got this problem. Seems very weird. I originally thought it was because the dir of the ringtone file had changed - which it had. But i re-assigned the ringtone to a default tone and still it does not work.
Must be a registry thing - but where to look?
Anyone have any ideas on this?
Yep I also have this problem. Did you guys figure it out in the end?
I've had the phone replaced but it ended up doing the same thing.
Upgraded BA WM2003 to WM5 and Speaker Out Ended.
I upgraded my Blue Angel device from Windows 2003 to Windows Mobile 5 and then I had no Volume on my device. My phone still works but I have to have headset paired up or directly connected to be able to use it since the speaker function is non-existent.
Please note this is for all applications not only the phone, so I have no reminders or anything that used to use the built in speaker.
Any ideas???
Recently I also just lost my Connection Settings..?
I can't figure that out since I haven't done anything to it recently to lose these settings, no I can’t connect to the Internet or even create a new connetion.
I have tried hard resting as well as soft resting to a point when everything worked, however this still doesn't fix the Connection Settings or the Volume. I think the Volume is directly related to the upgrade, so I might upgrade the ROM again to see if that fixes it.
Any other ideas.....?
matt sb said:
All,
Not sure what happened, but all of a sudden when I get an incoming call there is no volume on the ringer. If I switch to vibrate it will vibrate when a call comes in. I went to Settings-Notifications and confirmed there is a ring tone selected and I can play a test of it. Is there some other hidden setting I am missing? FWIW I am also running Goodlink 4.9 although it hasn't in the past caused any problems. Thanks.
Click to expand...
Click to collapse
When you tap the volume icon on the taskbar, do you see both sliders set to high?
Hi
I have exactly the same problem since several weeks. The TyTN II has been 3 times sent to the repair centre and the problem still exists! The device is completely useless if it's not playing the ringtones.
Hi all
It's very likely that's because you all have installed an external MP3 player (like Pocket Music). When you did so, the app registered .mp3 extensions as a PocketMusic extension.
When you receive a call, WM6 tries to open PocketMusic (or so) to play the ringtone, but can't because of compatibility reasons.
To have your ringtones back, you either uninstall your MP3 player, or unregister .mp3 extensions (to do that in PocketMusic, go in Menu -> Options -> file types and unselect .mp3).
Regards
Guitch
Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David
Alright, simply put: I want to use my Tilt to replace my old MP3 player.
I installed PocketPlayer and got an 8 gig MicroSD card. Filled the card about half-full with music, and plugged it in.
This is the weird thing. The first time I put it in, PocketPlayer recognizes all the files (1200 or so), and they play without issue.
The problem is, if I exit the program and try again later, only about 60 files are still in the library.
When I check the card with File Explorer, I only see those files. If I take the card out and open it on my PC, everything's still in there.
So my question is, why is it that my Tilt isn't able to keep all these files available to me?
Any suggestions or alternatives would be greatly appreciated.
i would try not to place all the files in 1 dir but put them in sub dirs if you dont already to see if it makes a difference
never had the issue myself but my lib is a tree struct with artist->album->tracks
hmm, I personally use media player so i have my db or artists/geners/albums etc
My card is 4gb with a boat load of songs on it, have you tried using a diffrent player to confirm its not pocket thats not causing the problem ?
do the files disapear from you another(total commander/etc) file explorer within windows mobile as well ?
um my 2c's
I have 1.4G of music on mine, in appropriate directories, and it's okay with Pocket Player.
However, I find that Pocket Player uses a lot of battery playing them. I don't know if it's because I have them in ogg format or what, but the Tilt gets quite warm when playing for a while and the battery drop is pretty high, although I haven't actually measured it yet. I should do that tomorrow.
I haven't had any problems w/ TCPMP & my 8 gb card. I have all my music in storage card\my music\'artist names', and all the playlist files saved in my music
the htc audio manager is good no problems when using it with 8gb card. but the repeat function doesnt work does anyone have the same problem???
I use Mortplayer (Freeware) which is better than any commercial app out there. I have lots of MP3's on my 8gb card and always reads my library. It can also display album art. It also has presets and extra Bass etc etc. Try it out.
Does your Tilt go boooom?
Okay, re-organizing the music into directories worked.
Now I'm faced with the problem of getting an effective way to listen to it.
I have a good set of headphones, but the USB-headphone adapter is another story.
I don't like the fact that the adapters make it so that the microphone doesn't work. What's the best solution for an adapter? Or should I just give up and go Bluetooth?
strollymonster said:
Okay, re-organizing the music into directories worked.
Now I'm faced with the problem of getting an effective way to listen to it.
I have a good set of headphones, but the USB-headphone adapter is another story.
I don't like the fact that the adapters make it so that the microphone doesn't work. What's the best solution for an adapter? Or should I just give up and go Bluetooth?
Click to expand...
Click to collapse
I personally like the Motorola S9 bluetooth headset. It all depends on the style you like but they sound pretty good. For bluetooth, it also depends on how much you'll be listening to it between charges.
I use the Plantronics convertible headset. Without the earbud it you can listen or make calls like a standard bluetooth. With the earbud you get stereo sound. The fit is dependant on your ears, though. They give you several options, including isolating buds, but you have to find what fits your ear best. Sound is great, and the bud make stereo convenient. I keep the bud in my pocket, so it is always available.
I use the latest Pocketplayer without a proble and like that the new version supports bluetooth control button like next song and play/pause. I still use TCMP to play my videos and with those two you cant go worng.
I just used kies to update my firmware. I have a Bell (Canada) gt-i9000m (vibrant). The update left all my settings from the old FW and in no time at all my phone was force closing apps. Did a full reset and it runs nicely had to put back all my apn settings and stuff. The only thing that's changed with the new FW is that I cant change songs from my bluetooth car deck and I cant even play or pause anymore For me its kinda a huge deal cuz I put all my music on the phone to play in my car and it was all working so nicely i could even fast forward in the track that was a one up on my old iphone (with the old FW). Now none of my bluetooth deck controls are working I do see the 2 touch buttons light up on the phone when i push buttons on my car deck so the phone is getting the command its just not responding. Any Ideas would be most helpful.
The only thing that's different is that I haven't re-rooted the phone yet or applied the lag fix because I was having a lot of force close problems and did 4 resets so far (i assume due to the lag fix). I was hoping the new FW would fix more problems that it made... I didn't take note of the stock FW on my bell i9000m at the very least I would flash that back on to get my bluethooth controls back if anyone knows the stock firmware or how to make it work with the JH2 FW?
do a factory reset/format
then start with new settings, it will work after you pair the devices again
I did a factory reset when i upgraded the FW because of the force close error's but I didn't format. So I did another factory reset followed by a format of both internal and external. Took over 3h's to get all my stuff back on the phone and the bluetooth controls are still not working in the car.
From all the trouble shooting I've done its one of two things;
1. The firmware JH2 changed something with the A2DP profiles.
OR
2. I haven't rooted or done the lag fix.
Those are the only things that are different from before.
If anyone knows the stock FW for the i9000m (bell vibrant) and/or a link to download it. It would be most helpful.
I will try re-rooting and applying the lag fix but i have a hunch that's not going to make my car deck start working with the phone any better.
The car deck i have is a KD-BT1 (made by JVC). Just to be clear I was able to control my phone via the controls on the deck & its remote with the old firmware. I have deleted my paired phone and re-paired before and after factory reset & format.
that's very strange.
i've had that problem before, but that was expect of every new flash i made.
i always had to make the Car Deck (Clario CZ509) forget the old Galaxy S, then pair it again with the flashed Galaxy S, then it works all good.
else i get really weird behaviour on both phones and Car Deck
I can stream excellent audio quality to the car, with nice sub (no loss) and be able to control remote both phone and/or car from either the Car Deck, the SGS Phone, or the Remote control that came with the Deck
it automatically switch between phone calls and music
Sounds like i should reflash my fw. Do you have a link to where you got yours cuz kies is no longer seeing my phone... just hangs trying to connect. Its happened many times i know the uninstall drill to make it work but i've invested so much time into my sgs i rather use odin this time over kies.
I've un-paired and re-paired them agian and agian the pair up no problem and i make sure to check off the box that pops up to always allow my bt device to access contacts, ect. It all sync's up flawlessly just dont have control. The music streams very clearly for me also (2x10s subs).
Btw thanks for your very helpful responses!
I'm still thinking it might be cuz yours is rooted and mine still isnt. trying that before i jump the gun on another re-flash.
are you using the stock "Music Player" (w/ ugly pink icon)??
Update...
I rooted and did the one click lag fix. A2DP controls still don't work. I was able to use the car deck to answer, hang up, dail a number it got from my contact list! I'm not sure if those were or weren't working before... I was only really conserned with the music controls and they still dont work.
I also tried calling Samsung to see if they could help me out with why I always get the force close errors. No luck they told me to call my carrier i told them I bought the phone from a differnt carrier... I'm on Fido with Bell phone. Samsung said Bell has to get the RMA if i need one.
I've herd the lag fix helps bring to light any memory problems and creates those force close errors. This is one of my big underlying issues with my i9000m it crash's all the time. I've factory reset at least 5 times and once it crashed from google maps looking for an address and it got stuck on the boot logo. I had to wipe from the recovery menu just to call my friend when i was out side of his building for like 30mins (didn't know the buzzer #) I thought the instability was due to the root and lag fix but the phone runs a lot worse with out them...
(never dropped banged or any kind of water/wetness)
sorry if i got a lil' off topic but the phone is running worse over time...
The stock music player app (called "Music Player") doesn't respond to the standard AVRCP controls (A2DP is phone-audio-to-bluetooth, AVRCP is remote-control-to-phone). Most other music player apps will. Are you sure you were using the standard music player previously? Anyway the solution is to use a different music player app.
Yes i was using the stock player before it worked fine.
I will try another one. I have been thinking that maybe something was changed with the stock music player with the FW update or maybe i need to go settings->apps->Musicplayer and clear the data... Going to try both and post my results tomorrow morning. Getting to late to go out to the car... LOL
I had a look at forum.xda-developers.com/showthread.php?p=7980935 and thing maybe something did change with my AVRCP version.
I cant "1.0—Basic remote control commands (play/pause/stop, etc.)"
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Well I couldn't sleep till i tried it. I installed MixZing mp3 player and some of the mp3 controls work now. Play and pause and rewind track but It wont skip to next track. So it looks like you hit the nail on the head and something changed with the Music Player when I updated the firmware.
Does anyone have a rip of the stock Music Player apk from the old firmware?
4u2nvinmtl said:
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Click to expand...
Click to collapse
That will be handsfree profile (HFP).
So its safe to assume something changed from my stock firmware to the one kies put on JH2 with the MusicPlayer app with regards to the AVRCP controls. I have yet to find a link of the stock firmware that was on my phone when I bought it, on the lunch date in Montreal.
Anyone got a link to the stock i9000m firmware from bell?
Thanks for all the help getting to the bottom of the problem.
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
4u2nvinmtl said:
are you using the stock "Music Player" (w/ ugly pink icon)??
Click to expand...
Click to collapse
I was until i changed it to "Player" that is the name of the app.
the Stock MP3 player that came with JH2 was really good, it had 5.1 sound, which other players app does not support yet.
the only reason i ditched it was due the annoying way how to add music to the play list, the new app is just Point to the folder you want, and click on select all/play all, done
when you are in the car driving, you have no fricking enough time to go select which album or artist or genre.
but playing off the Folder structure, you know where you put which songs, so you can quickly skip folders, fast forward, or reverse to reach the songs you want
all that aside the stock music player works well with the Bluetooth remote control options
i was using the stock music player for about a week in my car via bluetooth until i got annoyed of not being able to quickly pick from the SD card the songs i wanted to play
4u2nvinmtl said:
Anyone got a link to the stock i9000m firmware from bell?
Click to expand...
Click to collapse
I flashed mine via Kies JH2
4u2nvinmtl said:
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
Click to expand...
Click to collapse
i think they meant the SIMs unlocked or the phone Rooted
since you are already on JH2 which is legit
Moving on to something more Vibrant
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.
UPDATE:
so I went through root explorer side by side with my droid and my brothers droid2
in /system/etc/bluetooth/audio.conf there are differences, the bottom lines of the droid are as followed
# Just an example of potential config options for the other interfaces
[A2DP]
SBCSources=1
MPEG12Sources=0
[AVRCP]
InputDeviceName=AVRCP
when I looked at the audio.conf of the droid 2 it had differences here...
# Just an example of potential config options for the other interfaces
[A2DP]
SBCSources=1
MPEG12Sources=1
[AVRCP]
InputDeviceName=AVRCP
MetaDataSupport=1
ControllerSupport=1
also there was a bluetoothDUN.apk file on the droid2 . I saved his audio.conf and the apk and put them on my sdcard, swapped out the audio.conf file and rebooted, connected and paired bluetooth then played music and used superbtmonofroyo with no luck. I went back to my sd card and installed the bluetoothDUN apk and rebooted connected bluetooth again and still was unable to listen to music (actually this time an error popped up saying bluetoothdun not working properly force close, so I uninstalled the btdunl.apk)....are the .conf files connected to permissions somewhere that I am missing ? does anybody know?
orig.
I have a droid1 and Im running Charity Rom before that I just had stock 2.2.1 rooted. both are unable to stream audio through a mono bluetooth , but when I tried using Super BT mono froyo on my brothers droid 2 it works perfect.
when I flashed the charity rom I noticed that I had lost the ability to rotate my google maps in the new 3d view mode with multitouch and there was a simple permissions fix here http://forum.xda-developers.com/showthread.php?t=880445
Is it possible the answer to this bluetooth bug might be a permissions or config issue?