triangle with exclamation xperia x8!! HELP ME! - XPERIA X8 Q&A, Help & Troubleshooting

hi all .. I need your help .. I'm desperate .. I try to update my xperia x8 with the pc companiom and gave me error, now the phone will not start, I try to fix it with FlashTool, companiom SEUS and pc and I get the same result with error ... the phone does not start .. the flash mode if it works yet .. is a hardbrick? ..
observations: I did install recovery and root .. but I could never change the baseband to 015 .. flashing aborted or something ..
I have hopes of repairing it? .. excuse my writing .. I'm using google translator .. I'm from Argentina ..
Thanks to all!

emilianomp said:
hi all .. I need your help .. I'm desperate .. I try to update my xperia x8 with the pc companiom and gave me error, now the phone will not start, I try to fix it with FlashTool, companiom SEUS and pc and I get the same result with error ... the phone does not start .. the flash mode if it works yet .. is a hardbrick? ..
observations: I did install recovery and root .. but I could never change the baseband to 015 .. flashing aborted or something ..
I have hopes of repairing it? .. excuse my writing .. I'm using google translator .. I'm from Argentina ..
Thanks to all!
Click to expand...
Click to collapse
have you tried flashing stock FTF file?
if not try it and check if kernel is booting up or not

mayurcools said:
have you tried flashing stock FTF file?
if not try it and check if kernel is booting up or not
Click to expand...
Click to collapse
I try to repair with FlashTool ... and nothing happens

emilianomp said:
I try to repair with FlashTool ... and nothing happens
Click to expand...
Click to collapse
Does your phone goes to flash-mode?(((or also it reacts to pressing power button? -like vibration or Sony logo?)))
Take out the battery and replace it ,Press "back" button and plug the USB!
+ reinstall drivers by opening golden gate app(or something like that, I don't remember! ) (from c:/flashtools/drivers )
+ make sure that your battery is working fine
+ upload flash tools log file here
Sent from my ULTIMATE rom using Tapatalk 2

follow this guide
http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2

stamatis said:
follow this guide
http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2
Click to expand...
Click to collapse
thaanks!!! so much.. the x8 is working!! .. thanks!!!
)

Related

X8 stuck at ''Sony Ericsson''

I restored my phone with xrecovery .I did full wipe before restore.After I clicked ''Reboot Phone''in Xrecovery, it just stuck at ''Sony Ericsson''.NO GREEN LIGHT.I tried to use PC companion but it didn't recognise my X8.I tried to use Xrecovery but it can't start.I couldn't found SEUS.Please HELP!I will click thanks button.
model:X8(E15i)
age:almost 1 year
why bricked :restored by xrecovery
condition :stuck at ''Sony Ericsson''
HELP!
Macbook86000 said:
I restored my phone with xrecovery .After I clicked ''Reboot Phone''in Xrecovery, it just stuck at ''Sony Ericsson''.NO GREEN LIGHT.I tried to use PC companion but it didn't recognise my X8.I tried to use Xrecovery but it can't start.I couldn't found SEUS.Please HELP!I will click thanks button.
model:X8(E15i)
age:almost 1 year
why bricked :restored by xrecovery
condition :stuck at ''Sony Ericsson''
HELP!
Click to expand...
Click to collapse
It happen this to me once, what i did is. I jst remove and insert back the batt. Power on after the SE logo appear click back buttom untill u get x-rec. Then do. A full wipe before restore
Sent from my XPERIA X8 using XDA App
Try flash tool, if your phone can get into flash mode, then it should be fine! This is not a hard brick! What have you been trying before bricking this?
shark221 said:
It happen this to me once, what i did is. I jst remove and insert back the batt. Power on after the SE logo appear click back buttom untill u get x-rec. Then do. A full wipe before restore
Sent from my XPERIA X8 using XDA App
Click to expand...
Click to collapse
thanks first.I tried to click back button for a while the SE logo appear but x-rec didn't start.I did full wipe before restore.
HELP!
Macbook86000 said:
thanks first.I tried to click back button for a while the SE logo appear but x-rec didn't start.I did full wipe before restore.
HELP!
Click to expand...
Click to collapse
take a look at here mate.. http://forum.xda-developers.com/archive/index.php/t-1356349.html
well this is what i call a baby brick ..or soft brick
just follow these steps =)
1. download pc companion from SE website ~search x8 pc companion in google
2.install
3.click support zone (start )
4. click phone software update (start )
5. click repair phone
6.follow steps =)
i don't use flashtool since its a little complicated =P
this brick is very easy to recover so no panic
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
sorry dind't saw the no recognize button ..but i still think my method will still work ... ^ just click repair and follow steps
tohno said:
well this is what i call a baby brick ..or soft brick
just follow these steps =)
1. download pc companion from SE website ~search x8 pc companion in google
2.install
3.click support zone (start )
4. click phone software update (start )
5. click repair phone
6.follow steps =)
i don't use flashtool since its a little complicated =P
this brick is very easy to recover so no panic
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
sorry dind't saw the no recognize button ..but i still think my method will still work ... ^ just click repair and follow steps
Click to expand...
Click to collapse
thanks first but i tried your methond,it isn't work.I think this is an Hard Brick.
Macbook86000 said:
thanks first but i tried your methond,it isn't work.I think this is an Hard Brick.
Click to expand...
Click to collapse
did u try flashtool?
http://forum.xda-developers.com/showthread.php?t=986697
just try seus....search on google n download it........
1)Select your model (E15i/a)
2)Follow onscreen instructions to put phone in flash mode
3)SEUS will flash latest stock 2.1 rom!!
maybe ur phone mess up the xrecovery file in a odd way, unlock bootloader n get some kernel (alfs, nAa), and don't forget flash tool
Macbook86000 said:
thanks first but i tried your methond,it isn't work.I think this is an Hard Brick.
Click to expand...
Click to collapse
as long your phone can see the se white logo it isn't hardbrick!
hardbrick mean your phone totally died..
no vibrate when switch it on...
no green light while get into flash mode
u can simply use flash tool or SE PCC or SEUS..
are u too noob to follow the simple step?
otherway u can throw your money for repair at shop
nelikp said:
u can simply use flash tool or SE PCC or SEUS..
Click to expand...
Click to collapse
SEUS:I can't find it:http://www.sonyericsson.com/cws/support/mobilephones?cc=my&lc=en
SE PCC:tried, not working.
flash tool:I am trying it.
SEUS
Download Sony Ericsson Update Service from here:
http://sony-ericsson-update-service.en.uptodown.com/
It should be able to get you back to a functioning phone with stock Eclair Android (v2.1). Cheers,
/B
tohno said:
well this is what i call a baby brick ..or soft brick
just follow these steps =)
1. download pc companion from SE website ~search x8 pc companion in google
2.install
3.click support zone (start )
4. click phone software update (start )
5. click repair phone
6.follow steps =)
i don't use flashtool since its a little complicated =P
this brick is very easy to recover so no panic
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
sorry dind't saw the no recognize button ..but i still think my method will still work ... ^ just click repair and follow steps
Click to expand...
Click to collapse
pc companion cant detect my x8..
sorry im noob
1.Download flashtool
2.Download stock rom image from http://www.multiupload.com/XLV6AA41DB
3.Download baseband suitable to your phone from (http://www.mediafire.com/?d3pobqqc3py66)
4.Place both files to flashtool/firmwares folder
5.Install drivers from flashtool/drivers folder
6.(Dont connect your mobile to pc),Now click flash in flashtool and flash rom first
7.Flash baseband
8.Disconnect and restart
9.Done
1.go xrecovery.
2.format system.
3.download pc campanion
4.repair system
Macbook86000 said:
SEUS:I can't find it:http://www.sonyericsson.com/cws/support/mobilephones?cc=my&lc=en
SE PCC:tried, not working.
flash tool:I am trying it.
Click to expand...
Click to collapse
Hi, managed to unbricked your phone?
Your Xperia X8 problems
I'm sorry to tell you but,this may cause you to freak out.Your phone is BRICKED FOREVER.There is no way to fix it.
c903jerk said:
I'm sorry to tell you but,this may cause you to freak out.Your phone is BRICKED FOREVER.There is no way to fix it.
Click to expand...
Click to collapse
Well,i took my phone to Sony Ericsson and someone repaired my phone and it's FREE!

[Q] My w8 is not starting only showing sony ericsson startup screen.

I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
You will need a computer,download flash tool,download official w8 rom(original)
You can Thank me Now .
rishinhr said:
I installed cm7 without flashing nAa kernal and now i am not able to start my mobile after my last reboot by cmw.
I am also not able to switch to xrecovery or cmw on startup by pressing back key regularly..........
plz help me out god know what to do with my phone...............
and i also dose not unlock bootloader...........
oh!!! plz is there is any expert who can help me out.....
Click to expand...
Click to collapse
do u see sonyericsson white logo on startup?
try using SEUS http://sony-ericsson-update-service.en.uptodown.com/
or try this
http://forum.xda-developers.com/showthread.php?t=1011071
gudluck
dont worry. everything will be alright. This is a chance for you to gain knowledges.
No fail no success.
Bricked phone
I also face the same problem when i use Xperia X8. Here is the solution for to recover it.
Please search for Xperia x8/w8 Update Service setup in google and install the software in your PC then do the below steps.
1) switch off your phone
2) Press the back button continuously and connect the USB cable from your system to phone.
3) Then run the updated service. It will take nearly 30 minutes to complete the software updated process.
Bricked phone?
I had the same problems the first time, i even had to take it back to where I purchased it since it had warranty, after they handed the phone again I stayed with the feeling that there was something I had to try I did it again and it stayed on the sonyericsson logo and didn`t enter the Xrecovery by pressing back button guess what I tried pressin the other buttons the menu and the home button and it enter the Xrecovery from there try doing a restore if you backedup your info if not you have to use flashtool and flash the rom
try going to Xperiax8(todo para este movil) and search Reparar Sony Ericcson Xperia X8 despues de Briqueo (repair phone after brick)
Recommended if you download a clean stock rom I used 1.6 donut and then installed the stock baseband 06 am pretty sure that flashtool has it if not follow this
download the stock firmware to your device and you are back in business
you may use flashtool to flash stock fw.now cwm may not works as it was on fw,
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
rishinhr said:
but my w8 is not in the list of phones in SEUS..............can i install by selecting x8..................plz reply fast
Click to expand...
Click to collapse
try flashtool then
thanks i am out of danger............finaly
I Think My phone is HARD BRICKED help needed pls
rishinhr said:
thanks i am out of danger............finaly
Click to expand...
Click to collapse
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
arunvlnd8 said:
How? my w8 is not detected by the pc and i can't make my phone to the recovery mode by pressing back key while booting. It still end up in the blank screen after the Sony Ericsson text...
Click to expand...
Click to collapse
Restore with PCC
Sent from my E15i using xda premium
Or dl stock rom and flashtool. Flash stock using flashtool.
Sent from my rooted tomato using xda app
plz help me
i have same problem what can i do to backup rom ?

a problem with x8 !!

hello xda i have a x8 and i can flash it with flash tool and i did flash it with stock but it vibrate when i turn it on and the back light of the screen get on then restart ... without any thing on screen !!!
the flash tool detect it .. but it keeps on restarting .. the led is working also green when in flash mood and red as its charging !!
what do u think the problem is and is there any way posted here to solve this ?
Flash back to stock rom.
i did .. but no luck !
wemox said:
i did .. but no luck !
Click to expand...
Click to collapse
wat u wanna do? flash back to stock rom?try with seus/pcc
well open pc companion and choose update phone, it will bring the phone to its original firm. on 2.1, after that start all over again root, flash...

[Q] How to Rectify Bootloop Problem using Flash Tool

I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
Did you unlocked your bootloader ? And which CM rom are you using exactly ?
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
s3nbon5akura said:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
Click to expand...
Click to collapse
You should flash using flash tool to solve it
praveenkumarkm8 said:
You should flash using flash tool to solve it
Click to expand...
Click to collapse
how do i do that? sorry about this
s3nbon5akura said:
how do i do that? sorry about this
Click to expand...
Click to collapse
Here read these..
http://forum.xda-developers.com/showthread.php?t=1755215
Hit thanx if it helped..
Sent from my LEWA using xda premium
And here's the .ftf file of stock rom...
Sent by the walking walkman..
BlackRabbit1703 said:
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
Click to expand...
Click to collapse
Thanks for ur information, I tried all those steps mentioned above. Now my phone is working fine. Now I installed GingerDX 028b

[Q] my X8 is dead plzzzz help !!!!!!!!!

I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Root97 said:
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Click to expand...
Click to collapse
just flash the stock firmware using flashtool
download it from my signature
BlackRabbit1703 said:
just flash the stock firmware using flashtool
download it from my signature
Click to expand...
Click to collapse
Thnx ^_^ its appreciated .... any idea about the cause of the problem ?

Categories

Resources