Related
Hi everyone !
Sorry to disturb you but i've a problem with my phone. When i start android, i can use it but randomly ma phone freeze and i can't do anything else... I'm forced to remobe the battery to turn off my phone..
Anyone have an idea to resolve this problem ? Thanks a lot !
(Ps : sorry for my english i'm french :s)
blackmario said:
Hi everyone !
Sorry to disturb you but i've a problem with my phone. When i start android, i can use it but randomly ma phone freeze and i can't do anything else... I'm forced to remobe the battery to turn off my phone..
Anyone have an idea to resolve this problem ? Thanks a lot !
(Ps : sorry for my english i'm french :s)
Click to expand...
Click to collapse
yeah me too, same problem, 2 months or older roms was working good, now i can't use any new builds (every xdandroid or neopeek's build with sp3dev or seandean kernels), always the same story, system boots ok, than after 30 seconds freeze, and i have to pull out battery...
????
Same for me, but i could use Android for even 10hours without freeze.
Now the same build like before, fresh instalation and it freezes...
Someone can help us ? :'(
try this
blackmario said:
Someone can help us ? :'(
Click to expand...
Click to collapse
hello,
try this:
1) remove the SIM and boot first wimo then android
2) check the mobile data connection put this off
3) reboot wimo and android and wait
4) when back to android check that you have the correct apn
5) if now you have a stable androi try to enable the mobile data connection
the above steps worked for me.
2 things that I can help you with is:
1. DONT install a lot of Apps
2. Keep a simple low res, .png wallpaper...
pbfree said:
hello,
try this:
1) remove the SIM and boot first wimo then android
2) check the mobile data connection put this off
3) reboot wimo and android and wait
4) when back to android check that you have the correct apn
5) if now you have a stable androi try to enable the mobile data connection
the above steps worked for me.
Click to expand...
Click to collapse
i can confirme that now it works!
i found another freeze cause: automatic setting of clock from network
and hw keys now works very well using seandean v4b normal kernel
so these steps should be more safe and complete:
1) remove the SIM and boot first wimo then android
2) check the mobile data connection put this off
3) disable automatic setting of clock
4) disable gps (just to save battery)
5) shutdown phone quickly at first boot or it will freeze
6) plugin SIM card
7) plugin wall charger and wait 10 second (wait for led flashing)
8) power on phone, winmo than haret and wait android is fully loaded
9) now you can unplug wall charger, and hw key will not die anymore
10) check that you have the correct apn
11) if now you have a stable android try to enable the mobile data connection
12) you're ready to use android without freeze
very soon we will have camera support too, and i hope new 3d driver (following htc touch pro 2), i hope our xperia one day will be at the same level of an HTC Hero (25/26fps at neocore)
Now it's fonctionnal for me too !! Thanks !! But i have an other problem... I can't download anything from the market !! (But my data connection works perfectely i can go on the web !!)
blackmario said:
Hi everyone !
Sorry to disturb you but i've a problem with my phone. When i start android, i can use it but randomly ma phone freeze and i can't do anything else... I'm forced to remobe the battery to turn off my phone..
Anyone have an idea to resolve this problem ? Thanks a lot !
(Ps : sorry for my english i'm french :s)
Click to expand...
Click to collapse
please disabled the overclock function.(remove "acpuclock.oc_freq_khz....." in startup file)
It'll be ok.
thank you very much from indonesia now i can run the latest froyo on my tp2 flawlessly
AssasinQ said:
Same for me, but i could use Android for even 10hours without freeze.
Now the same build like before, fresh instalation and it freezes...
Click to expand...
Click to collapse
Same for me...
I will try the above mentioned tips and see if that helps me as well.
This thread really helped me, after several freezes and reboots yesterday I was ready to let go of Android for the X1 for good. This thread gave me some new hope
edit: After a couple of hours, no freeze, no reboots BUT just had the "button freezes" problem and had to reboot. Using the latest faryabb's ext2 build.
because faryabb rom use an old kernel try to use needo's rom
pirlano said:
because faryabb rom use an old kernel try to use needo's rom
Click to expand...
Click to collapse
I had some serious crashes with that one leading to a non usable installation. He's apparently looking into some applications that he thinks might be the cause of this...
Olleman said:
I had some serious crashes with that one leading to a non usable installation. He's apparently looking into some applications that he thinks might be the cause of this...
Click to expand...
Click to collapse
try CM one with stable kernel, superfroyo is buggy
pirlano said:
try CM one with stable kernel, superfroyo is buggy
Click to expand...
Click to collapse
Doing that in a sense, using faryaabs latest ext2 with kernels and modules from the suggested one - I want to have gmail and XDA app working
Sent from my XPERIA X1 using XDA App
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
no one cant help, I really freak out to solve this issue
Hi matanamos,
have you wiped data/cache before flashing?
For 2.2 ROM's it might be recommended, to install one of the full G.O.T. 2.2.1 SBF images with RSDlite first.
Hope this helps!
Cheers,
scholbert
I tried everything you said and nothing work.
I really want to move from 2.1
BTW THX
nobody cant help me??
matanamos said:
nobody cant help me??
Click to expand...
Click to collapse
Did you really try to flash the G.O.T. 2.2.1 SBF image with RSDlite?
What happened afterwards?
We should try to break the problem down to pieces, so anyone could follow
Regards,
scholbrt
matanamos said:
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
Click to expand...
Click to collapse
Did you install the correct baseband files?
For example, the ROM you installed could be using Europe 3G and your operator could be running North American 3G (no idea what your provider uses, but you should look it up).
Once you know, you could choose the appropriate baseband in either GOT Open Recobery or Androidiani OR.
There are some manual ways (file copying) to do this, but it is more complicated to do then through OR (especially if you already flashed).
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
matanamos said:
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
Click to expand...
Click to collapse
try this
go to the open recovery menu wipe the cache and dalvik cache and then change the baseband and wipe the dalvik cache and cache again
if still can't then try using RSD lite to flash the GOT 2.2.1 SBF then wipe the cache and dalvik cache
let us know what happens next
First of all thx for your comment,
When I burn firstly the G.O.T 2.2.1 the Rom works(he recognize my opreator(cellcom)) great and after I burn the ROM I want like Froyomod or MIUI I still get the Erorr!
please andybody?!?!?
I had the same issue. This is what I did.
Flash the original sbf using rsd lite. Flash vulnerable recovery using rsd lite. Flash CM using OR. Then do a dalvik, cache and full system wipe. Reboot.
This solved my issue. But remember, whenever ur flashing the original sbf and the bootloader, do not boot into android. Keep the Direction Pad up key pressed so you always boot into the bootloader when Rsd lite reboots ur phone.
Try that and pm me if you still have issues.
I must use the CM ROM or I can use the FROYOMOD instead!?
and I dont understand what I have to do after I Flshe the Rom By the RSD LITE , you mean after the RSD LITE flash my SBF and restart my phone I need AUTO get into bootloader agian1?
and what you mean by the "Original Sbf"?
The yellow sim is cause to the Force Close problam.
hhhh LOLLL matan?!?! XD i recogenize you XD
Some ROMs overclock by default ( i believe most do by now).
This makes you phone faster, but potentially less stable with some (rare) milestones. You be may unlucky with you phone.
You should check to see if this is the case.
Either edit the 10overclock file manually from a shell in your recovery if use a recovery that supports overclock and disable it (set it back to stock 550).
Another option, if you really want to overclock, is to up the max vsel to gain stability. But as this requires trial and error, i would test the stock speeds first to confirm that this is indeed the problem.
It may not be overclocking, but it sure sounds like what happens when you have just enough vsel to boot but not enough to be stable.
Sent from my Milestone using XDA App
Im cant belive that the oc cause the fc.
The new yellow usim in cellcom--israel.
The kernal of 2.2 are not giving fc error. After rom installing the the fc popping up.
When i inserted the old sim (the purple one) the FC stopped to poping up.
I will try it. Update in a few hours!
TNX all!!!
Sent from my Milestone using XDA App
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
matanamos said:
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
Click to expand...
Click to collapse
I would try to do all three wipes from open recovery (cache partition, dalvik and full wipe) than apply update with the custom rom .zip and (very important!) set baseband frequencies for you country in open recovery.
First of all TNX alot!
I tried to do that (wipes, than install rom and baseband, RR than reboot.)
But it didnt work =/
Maby the KERNAL (got release) cause to the FC??
Sent from my Milestone using XDA App
plzz I tried everything and nothing help ,like Burn without sim ect
pllz anyone!
Hello guys. I'm newer here and I came in fornt of you with one problem (but biggest one). Today I tryed to fixlag with voodoo and S&G tools and something bad it's happend with my phone. I install kernel after that voodoo lag fix and the battery icon. I moved to sd card all those things and after that I reboot my phone and the problem appear. My phone is oppeing but my screen is freezing with the logo "GALAXY S GT-I9000 SAMSUNG" and no other things I can do (only to watch this). How can I recover my phone and the OS? Please someone help me to do something because I don't have any inssurance and I'm f**ked up!
Thanks a lot for helping and have a wonderful day!
Sorry for my language guys.
P.S.: If you don't undestand what I want to explain ask me for a print screen shoot. Thank you.
need to use odin.. get in download mode and reflash a complete firmware like jpu and then any custom f/w you want.
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
TheMadxtremist said:
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
Click to expand...
Click to collapse
Which kernel did you use? To be honest, go back to Windows if following simple guide is too difficult. And camera quality won't be any better in Android.
The only reasonable kernel for NAND is the kernel with separate cache partition. On each other appear errors sooner or later. Install this kernel, reinstall the system and apply the update.
And do not start constantly new threads to the questions on which someone already replied before. Read and search forum!!
You people dont get it .
My kaiser is and android F-O-R-E-V-E-R.
Because i flashed it using kaisercustomruu.
and the power button+camera+reset button dont work for me.
i think there's a prob with camera button that's why.
so , now , how do i flash the kernel ?
Please help !!
i cant get into bootloader .
is it the camera button then ?
tell me ?
No, you don't get it man! Stop beeing a noob and learn to follow simple guides! You need to copy KAISIMG and KAIDSIAG (make sure to unpack ) to your memory card. After that you can flash with "Power + Camera + Reset". Is this so hard to Google and find what you need? Also, to make sure you won't make any more mistakes, check if you have HardSPL installed and apply all updates from kernel you used. I recommend you this kernel.
http://forum.xda-developers.com/showthread.php?t=1152219
Man, I just hate those guys who are noobs and consider themselves to be experienced users .
Mr. Noob Hater , were'nt u a noob ?
and i told u i have tried that and it doesnt work................
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
TheMadxtremist said:
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
Click to expand...
Click to collapse
Do you have HardSPL? And remember to keep Camera button fully pressed, not just in half.
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
TheMadxtremist said:
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
Click to expand...
Click to collapse
What do you mean it doesn't accept your SIM card? Some screenshots? Anyway, if Camera button doesn't work for you, then you're stuck with this kernel forever . Which one did you flash? I'll give you proper update for it.
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
TheMadxtremist said:
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
Click to expand...
Click to collapse
I asked you about kernel! Whcich KERNEL did you flash?
I dont remember correctly , but i think i flashed kernel with separate cache partition and modified cpu and gpu with atools.....
Now , i only need an update .............
i figured out and rectified the problem as well......
Was pretty hard......
AND THANK YOU MR> NOOB HATER
waiting for wifi update.....
go to settings/about phone and check kernel version. If show something like 2.6.32.9 N50Vc #39 Kernel you can find androidupdate.tar packed with kernel in Cache Kernel & ATools.zip. http://forum.xda-developers.com/showthread.php?t=1152219.
Can you share what was wrong with the sim? (for future"generations" with the same problem)
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
No. Rather, it will not work. You do not have a scoot's kernel... Maybe someone else remember your kernel signature and give you update.
TheMadxtremist said:
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
Click to expand...
Click to collapse
Man, you just proved that you're a huge noob. You flashed a kernel with RUU and you don't even remember which one was that. LOL . Looks like you're out of WiFi forever now . I've never seen such kernel anywhere...
TheMadxtremist, If I were you I'd tried to find the reason why camera button not working. You wrote that you dropped phone, so probably this is some hardware failure(flex tape, switch, something else). If you have any experience try to disassemble phone and fix this or find someone who can do it for you. Because even if someone will give you update your phone will be unstable with this kernel.
Yo guys, please i need ur help, im fighting with this for 2 days and i think i cant win this battle against my phone.
So the problem is:
First, i installed P.A 4.0 beta kit kat with iodak v9 kernel, the phone was going random dead. I thought is the problem with P.A cause is beta so i went to Vanir 4.3.1. I went got iodak v9 kernel again and it was doing this same for me. Random dead phone (off had to make him on)
So i tho its problem with kernel so i back to iodak 8v5 fixed from anykernel project. Yea, phone is no random dead anymore but when its going to deep sleep (i think cause when i wont use phone for 2h) and i try to use it again, the whole system android is lagging so much.
Guys, pls, help me. What i have to do? something bad with my phone or with drivers/system/android?
I have done dalvik wipe and cache everytime.
Second question is ... how to formate sd card? I cant, from computer and from android (no option) from recovery when im doing format storage sd card1 is getting error. What i have to do?
The most important is first question so please help me!
Thanks!
Taggin said:
Yo guys, please i need ur help, im fighting with this for 2 days and i think i cant win this battle against my phone.
So the problem is:
First, i installed P.A 4.0 beta kit kat with iodak v9 kernel, the phone was going random dead. I thought is the problem with P.A cause is beta so i went to Vanir 4.3.1. I went got iodak v9 kernel again and it was doing this same for me. Random dead phone (off had to make him on)
So i tho its problem with kernel so i back to iodak 8v5 fixed from anykernel project. Yea, phone is no random dead anymore but when its going to deep sleep (i think cause when i wont use phone for 2h) and i try to use it again, the whole system android is lagging so much.
Guys, pls, help me. What i have to do? something bad with my phone or with drivers/system/android?
I have done dalvik wipe and cache everytime.
Second question is ... how to formate sd card? I cant, from computer and from android (no option) from recovery when im doing format storage sd card1 is getting error. What i have to do?
The most important is first question so please help me!
Thanks!
Click to expand...
Click to collapse
You are probably suffering from throttling.Make sure max CPU frequency is @ 1500 mhz.I'm on PA 4.0 beta with iodak v9.0(or 9.1, doesn't really matter) and having no problems at all.
Also to fix your SD card, get an SD card reader (USB microSD reader or laptop, both works.) and install minitool partition wizard on windows.First wipe the SD card with it and then format to fat32.Make sure you label it or else it won't be visible in windows.It'll still work on android though.
Also could you explain "Random dead"? Shutdown? BlackScreenOfDeath? Either way I'd say it's caused by heat.
Thanks so much for answer.
As i know v9 is max 1500 mhz? so how it go throttling? and throttling when i didnt do anything? phone was just on deep sleep? I was already using v8.5 on official cm 10.1 rc 3 and no problems and it was 1,7.. mhz
So i will change now to 1,5 and see if the problem is still there or not.
edit: yes i meant Shutdown... or just black screen but i could hear if someone is calling to me. Sometimes only black screen and i dont hear anything but when u were calling to me u could hear signal like a phone is on not off
Ok, seem is not the problem with 1700 mhz.. phone again gone..
Taggin said:
Ok, seem is not the problem with 1700 mhz.. phone again gone..
Click to expand...
Click to collapse
You say you can't format the SD-Card - what happens when you try?
As you have this problem on two different ROMs, I'd be tempted to flash back to Stock and make sure you don't get similar problems there - that way you can isolate the hardware from the equation and start with a fresh platform for reflashing custom ROMs afterwards.
well i dont have even option to format my sd card. When i want do it from android vanir 4.3.1 there is no option. The only one is make off ur sd card. From windows when i click right mouse i can see only how much gb is used/free. No option to format. Whats bad? i tried from recovery too but then i got only fail, no number of issue or sth..
And @ rom... today on night it was looking good.. 30% per cent on battery... i made localisation off and went sleep.. i wake up moring and battery was 0%. No idea why, i made battery now 100% and looking if the problem is still there. Actually its working fine not sure for how long. Im still on 1500 mhz. If it will work today fine it mean the problem was @1700 mhz but why? when i was already using 1700 mhz with 4.2.2 and no issues..
And why in night i lost 30% of battery too? the problem with off localisation or what? or my phone need at least one connection with internet, since i dont have wifi etc so its fresh install wihout internet connect..
I hope u know what im talking @ cause my english is not good haha
Thanks for help!!!
Taggin said:
well i dont have even option to format my sd card. When i want do it from android vanir 4.3.1 there is no option. The only one is make off ur sd card. From windows when i click right mouse i can see only how much gb is used/free. No option to format. Whats bad? i tried from recovery too but then i got only fail, no number of issue or sth..
And @ rom... today on night it was looking good.. 30% per cent on battery... i made localisation off and went sleep.. i wake up moring and battery was 0%. No idea why, i made battery now 100% and looking if the problem is still there. Actually its working fine not sure for how long. Im still on 1500 mhz. If it will work today fine it mean the problem was @1700 mhz but why? when i was already using 1700 mhz with 4.2.2 and no issues..
And why in night i lost 30% of battery too? the problem with off localisation or what? or my phone need at least one connection with internet, since i dont have wifi etc so its fresh install wihout internet connect..
I hope u know what im talking @ cause my english is not good haha
Thanks for help!!!
Click to expand...
Click to collapse
You don't format your SD Card from within Android OS - you do it from Recovery only.
Ignore all your other problems. You have so many different issues that other people don't report, so there is something major wrong.
Re-flash to Stock (Recovery and ROM) via .kdz and then start troubleshooting from there.
Actually is working fine, no battery drain and no shutdown. I made @1500 mhz. Still dont know why there was problem with @1700. I will write here if the problem will be again. Then i will try with stock.
From recovery i cant format idk why... clicking on it format storage/android/data and getting error - failed to format or sth
Ty for help.