SuperCID - One (M7) Q&A, Help & Troubleshooting

Howdooo All
SuperCID? Any guide to do it yet?

Go here, acquire S-OFF and then search for the supercid command.
http://forum.xda-developers.com/showthread.php?t=2314582

Theshawty said:
Go here, acquire S-OFF and then search for the supercid command.
http://forum.xda-developers.com/showthread.php?t=2314582
Click to expand...
Click to collapse
^__^ ive just written a guide for it ^__^
It was just a thought that was all

The command is:
Code:
fastboot oem writecid 11111111
.
You can change the supercid with other cid like HTC__405 or HTC__001 etc etc

Guich said:
The command is:
Code:
fastboot oem writecid 11111111
.
You can change the supercid with other cid like HTC__405 or HTC__001 etc etc
Click to expand...
Click to collapse
Just make sure that what you change it to equals 8 characters. That's why there is an extra long space for CIDs like HTC__001.
Super CID is 11111111.

pablo11 said:
Just make sure that what you change it to equals 8 characters. That's why there is an extra long space for CIDs like HTC__001.
Super CID is 11111111.
Click to expand...
Click to collapse
I wrote right

Guich said:
I wrote right
Click to expand...
Click to collapse
Yep, didn't submit my post for a while and then saw you'd already posted. That's what happens when you're cooking dinner :laugh:

pablo11 said:
Yep, didn't submit my post for a while and then saw you'd already posted. That's what happens when you're cooking dinner :laugh:
Click to expand...
Click to collapse
No prob mate

Related

Change Supercid to HTC__Y13.

I run the command to change my cid to Supercid 11111111.
Now i want to change back to HTC__Y13.
I run this command ang failed : [email protected]:/ # dd if=/sdcard/mmcblk0p19 of=/dev/block/mmcblk0p19
dd if=/sdcard/mmcblk0p19 of=/dev/block/mmcblk0p19
/sdcard/mmcblk0p19: cannot open for read: No such file or directory
1|[email protected]:/ #
What am i doing wrong?
Go to the bootloader and type fastboot oem writecid HTC__Y13
(two underscores)
Theshawty said:
Go to the bootloader and type fastboot oem writecid HTC__Y13
(two underscores)
Click to expand...
Click to collapse
I have done that, and my cid shows HTC__Y13. Is that good then?
Adrianiii said:
I have done that, and my cid shows HTC__Y13. Is that good then?
Click to expand...
Click to collapse
I think that is all there is to it, but don't take my word for it.
Adrianiii said:
I have done that, and my cid shows HTC__Y13. Is that good then?
Click to expand...
Click to collapse
Yes no need to mess with hex editing. Flash your RUU now.
gianton said:
Yes no need to mess with hex editing. Flash your RUU now.
Click to expand...
Click to collapse
Ok i will do that.
Better set CID to HTC_001. That is for the Europe region and will probably give you faster OTA's.
Theshawty said:
Better set CID to HTC_001. That is for the Europe region and will probably give you faster OTA's.
Click to expand...
Click to collapse
Thx for the help guys, i changed my CID to HTC__001.
Theshawty said:
Better set CID to HTC_001. That is for the Europe region and will probably give you faster OTA's.
Click to expand...
Click to collapse
Thats UK cid right? HTC__Y13 is nordic. Im Finland, so can i use that 001?
Owdy said:
Thats UK cid right? HTC__Y13 is nordic. Im Finland, so can i use that 001?
Click to expand...
Click to collapse
001 is general Europe. Unless I'm mistaken, there's no cid specifically for unbranded UK phones.
Since you're a fellow nord, I'd say you'd be better off using HTC__Y13.
Sent from my HTC One using Tapatalk

[Q] How to change CID

Hello,
i am new to htc (not only one) and i have done s-off to my one and want to know how can i change my cid ??
udimars30 said:
Hello,
i am new to htc (not only one) and i have done s-off to my one and want to know how can i change my cid ??
Click to expand...
Click to collapse
plug your phone to pc and open command prompt
point the command prompt to your folder where u keep adb and fastboot file..
1) "adb reboot bootloader"
2) "fastboot oem writecid 11111111" **eight '1'**
3) "fastboot reboot-bootloader" and see your cid change to 11111111
randykzc said:
plug your phone to pc and open command prompt
point the command prompt to your folder where u keep adb and fastboot file..
1) "adb reboot bootloader"
2) "fastboot oem writecid 11111111" **eight '1'**
3) "fastboot reboot-bootloader" and see your cid change to 11111111
Click to expand...
Click to collapse
and if i want to change my cid to another like htc_y13 then??
udimars30 said:
and if i want to change my cid to another like htc_y13 then??
Click to expand...
Click to collapse
....then fastboot oem writecid htc__y13
the command is ( fastboot oem writecid ) the other is the cid you wanna have like htc__304 for example!
ChanceOfChange said:
....then fastboot oem writecid htc__y13
the command is ( fastboot oem writecid ) the other is the cid you wanna have like htc__304 for example!
Click to expand...
Click to collapse
if i want to go back to my original CID i.e HTC_001 and would like to get ota's for that cid then what should i do??
udimars30 said:
if i want to go back to my original CID i.e HTC_001 and would like to get ota's for that cid then what should i do??
Click to expand...
Click to collapse
Changing ONLY CID will not get you the OTA updates. For OTA, you need to change your CID, MID, flash a RUU for that CID, then OTA update it. After updating, you can change your CID and MID back to whatever you want.
ArmedandDangerous said:
Changing ONLY CID will not get you the OTA updates. For OTA, you need to change your CID, MID, flash a RUU for that CID, then OTA update it. After updating, you can change your CID and MID back to whatever you want.
Click to expand...
Click to collapse
Didn't get you, can you elaborate more!
and thanks
udimars30 said:
Didn't get you, can you elaborate more!
and thanks
Click to expand...
Click to collapse
You need to change CID, but you also need to change MID or the OTA won't install. Changing CID and MID is still not enough, because OTA will check your software version first. For example, if you change your CID to HTC__001 and MID to the correct one (I dono what is MID for HTC__001), you still can't install the OTA cos your ROM is different version than HTC__001. You need to install HTC__001 RUU, then check for OTA. Only this way you can get OTA from other regions.
UK can get Romania OTA because both their ROM version is the same, so UK can just change CID, they don't need to do so many steps
ArmedandDangerous said:
You need to change CID, but you also need to change MID or the OTA won't install. Changing CID and MID is still not enough, because OTA will check your software version first. For example, if you change your CID to HTC__001 and MID to the correct one (I dono what is MID for HTC__001), you still can't install the OTA cos your ROM is different version than HTC__001. You need to install HTC__001 RUU, then check for OTA. Only this way you can get OTA from other regions.
UK can get Romania OTA because both their ROM version is the same, so UK can just change CID, they don't need to do so many steps
Click to expand...
Click to collapse
Mine is HTC__001 and I want to change to HTC__Y13 which is having same MID so what all should I do to get 4.2.2 OTA??
Sent from my HTC One using Tapatalk 4 Beta

HELP- i cant turn back

Hi Guys
i acquired a few days ago a new cell
ONE HTC m7 32GB
with these characteristics
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
but.... i upgrade to the European version (to update to 4.2.2)
PN0710000
changing the
CID to PN0710000 and MID to HTC__304
before I realized the problem of the camera (blurring and noise at night)
and thought it was normal.
now I want to go back and can not find the official firmware anywhere
now im in 4.2.2
Pleas Help me!
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
EddyOS said:
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
Click to expand...
Click to collapse
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
isma907 said:
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
Click to expand...
Click to collapse
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
criszz said:
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
Click to expand...
Click to collapse
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
isma907 said:
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
Click to expand...
Click to collapse
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
criszz said:
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
Click to expand...
Click to collapse
my model is not on the list you say
isma907 said:
my model is not on the list you say
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
criszz said:
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
Click to expand...
Click to collapse
sorry for my ignorance
but i dont know who is my model i read the list but is not here
could you give me, what would be my model in this case? sorry for disturb
my htc is not 64gb ... is a 32Gb.. this worK?
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
wmg316 said:
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
Click to expand...
Click to collapse
SO... first i need to flash the RUU
and later write CID AND MID?
isma907 said:
SO... first i need to flash the RUU
and later write CID AND MID?
Click to expand...
Click to collapse
The RUU checks cid and mid for compatibility. The only reason you are changing them is to flash the RUU.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2

[Q] Changing MID

hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
[TUTORIAL] How to change the MODEL ID of the HTC One including video link
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
nkk71 said:
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
nkk71 said:
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
Click to expand...
Click to collapse
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
biopl said:
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
Click to expand...
Click to collapse
yep, should be good to go.
and remember to stay s-off!!!
nkk71 said:
yep, should be good to go.
and remember to stay s-off!!!
Click to expand...
Click to collapse
sorry for silly question,, will this remove s-off and how to stay s-off ?
biopl said:
sorry for silly question,, will this remove s-off and how to stay s-off ?
Click to expand...
Click to collapse
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
nkk71 said:
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
biopl said:
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
Click to expand...
Click to collapse
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Sent from my HTC One using XDA Premium 4 mobile app
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
biopl said:
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Click to expand...
Click to collapse
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
nkk71 said:
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Click to expand...
Click to collapse
so lets say after i flash RUU and update to 4.3, will i need to root again if i wanted to install custom roms/firmwares ?
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
I tried and got ERROR [150]
Sent from my HTC One using XDA Premium 4 mobile app
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
nkk71 said:
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
Click to expand...
Click to collapse
I think for Error 155, i need to re-lock my bootloader then flash RUU
biopl said:
I think for Error 155, i need to re-lock my bootloader then flash RUU
Click to expand...
Click to collapse
not if you are s-off

[Q] How to change CID ?

My phone has this CID HTC__332 for Latin American countries and I live in Middle East. Haven;t got the OTA lollipop update till now and would like to change CID, had gone through few posts related to changing CID but confused.
midhunmukund said:
My phone has this CID HTC__332 for Latin American countries and I live in Middle East. Haven;t got the OTA lollipop update till now and would like to change CID, had gone through few posts related to changing CID but confused.
Click to expand...
Click to collapse
You need s-off to change CID and also need to know how to use fastboot commands.
very simple procedure after that, one simple command of "fastboot oem wite cid HTC__001"
HTC__001 is WWE edition, and cid number is always 8 character long, so HTC__001 has 2 underscores to make up the 8 character, BS_US001 is developer edition and only has 1 underscore to make up the 8 characters etc etc, always capital letters too.
Those are the 2 most popular CID's unless your on an AT&T phone with a T-Mo sim or Vise versa.
Seanie280672 said:
You need s-off to change CID and also need to know how to use fastboot commands.
very simple procedure after that, one simple command of "fastboot oem wite cid HTC__001"
HTC__001 is WWE edition, and cid number is always 8 character long, so HTC__001 has 2 underscores to make up the 8 character, BS_US001 is developer edition and only has 1 underscore to make up the 8 characters etc etc, always capital letters too.
Those are the 2 most popular CID's unless your on an AT&T phone with a T-Mo sim or Vise versa.
Click to expand...
Click to collapse
thanks..could you guide me to S-OFF procedure?
will i be able to get OTA updates from after S-OFF
midhunmukund said:
thanks..could you guide me to S-OFF procedure?
will i be able to get OTA updates from after S-OFF
Click to expand...
Click to collapse
download an app called sunshine s-off onto your phone, not sure if you can get it from playstore, but just navigate to this link on your phone: http://theroot.ninja/
install the app once downloaded on your phone and then open it, it will run some tests, if it can s-off your phone then you have to pay $25 through paypal, if it cant s-off your phone then it will let you know why, your phone will reboot a couple of times, you will then have a free phone to do whatever you like with it.
after s-off, you can flash any RUU or firmware you like for your version of the M7 OTA's will be a thing of the past.
Seanie280672 said:
download an app called sunshine s-off onto your phone, not sure if you can get it from playstore, but just navigate to this link on your phone: http://theroot.ninja/
install the app once downloaded on your phone and then open it, it will run some tests, if it can s-off your phone then you have to pay $25 through paypal, if it cant s-off your phone then it will let you know why, your phone will reboot a couple of times, you will then have a free phone to do whatever you like with it.
after s-off, you can flash any RUU or firmware you like for your version of the M7 OTA's will be a thing of the past.
Click to expand...
Click to collapse
Awesome, that was cool done with S-OFF, thanks a ton and how to change the CID?
midhunmukund said:
Awesome, that was cool done with S-OFF, thanks a ton and how to change the CID?
Click to expand...
Click to collapse
Do you know how to use fastboot and the commands ?
Nope
midhunmukund said:
Nope
Click to expand...
Click to collapse
ok sent you a pm

Categories

Resources