Related
Hi,
I have an question i want to install a new rom
This one http://forum.xda-developers.com/showthread.php?t=1871713
but is says : Status 7 installation abboted
My cwm base version is 6.0.1.9
This was my other qeustion maybe is that helpful for my new qeustion
http://forum.xda-developers.com/showthread.php?p=35430659#post35430659
Thanks in advance
Seems you are on the leak Samsung jb with philz kernel. You can flash cm10 kernel or hydracore and then select boot into recovery and then flash the ROM. Boot into recovery will be under "advanced"
Sent from my GT-N7000 using xda premium
And where can i find so fast that kernel
ive been searching but i only found cwm rom's not kernels
Gr.
You are using Philz kernel, or you want it?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Hydracore kernel will be in the Original Development Section
So i can install this one Kernel_CM10_20121213_Nightly_CWM
Over my kernel which i have now
Or this one do you know whats better ?
http://forum.xda-developers.com/showthread.php?t=1749863
you can use any. and as you are on TW JB phone wont boot on either. so preload all the required files before flashing the kernel just to be on the safe side
So I generally feel I know my stuff to a limited degree about phones, but I am unsure of this...
I am using the standard "safe CM kernel" but have always prefered Philz's interface over native CWM.
Now what is the issue with this, why people don't seem to like his? Is it the fact that he's not open source 100%?
And would there be any problems with flashing his kernel onto PA and over the default CWM 6.0.1.4 (or whatever the most up to date version is)?
If someone can explain in laymans terms that would be great.
Thanks
PhilZ + PA (CM, Aospa, aosp, aokp) = total chaos bootloop
PhilZ + Touchwiz = safe kernel and root and recovery
Sent from my GT-N7000 using xda premium
Okay. So basically Philz kernel is for stock touchwizz (Samsung) roms only.
Because you are running a rom based on CM (and not TW), Philz kernel won't work, so you won't be able to get his modded CWM interface.
So if you flash his kernel over PA, you will get
TheNoticer said:
total chaos bootloop
Click to expand...
Click to collapse
[RECOVERY] [i9082/i9082L] Clockworkmod Touch & Non-Touch Recoveries [Update v6.0.5.0]
CLOCKWORKMOD NON-TOUCH RECOVERY
v6.0.5.0
(Compiled from CM11 source)
Instructions to install the latest CWM v6.0.5.0 Non-Touch are same as below.
Date: 22nd July 2014
Clockworkmod Non-Touch Recovery v6.0.5.0
Download
-----x-----x-----x-----
v6.0.4.9
Instructions to install the latest CWM v6.0.4.9 Non-Touch are same as below.
Date: 18th June 2014
Clockworkmod Non-Touch Recovery v6.0.4.9
Download
-----x-----x-----x-----
v6.0.4.7
(Compiled from CM11 Source)
Instructions to install the latest CWM v6.0.4.7 Non-Touch are same as below.
Date: 5th February 2014
Clockworkmod Non-Touch Recovery v6.0.4.7
Download
-----x-----x-----x-----
v6.0.4.5
(v6.0.4.5 hasn't been compiled by me. It is pawitp's recovery. He provided it as an ODIN flashable *.tar file, I packed it into a CWM flashable zip file. All credits to pawitp.)
(Pawitp's Thread)
Instructions to install the latest CWM v6.0.4.5 Non-Touch are same as below.
Date: 12th December 2013
Clockworkmod Non-Touch Recovery v6.0.4.5
Download
-----x-----x-----x-----
v6.0.4.4
(Compiled from CM10.2 Source)
Instructions to install the latest CWM v6.0.4.4 Non-Touch are same as below.
Date: 8th November 2013
Latest unmodified Clockworkmod Non-Touch Recovery v6.0.4.4
Download
-----x-----x-----x-----
MODDED CLOCKWORKMOD TOUCH RECOVERY
v6.0.3.6
Yes, we already have a CWM Touch Recovery, TWRP and the highly customizable Philz Recovery for our Galaxy Grand i9082/i9082L, all thanx to the talented and brilliant developers and owners of i9082!
Then what are these?
These are a bit modified (modded), unofficial CWM Touch Recoveries for i9082/i9082L.
I like things customized my way, so i started working on customizing CWM Touch Recovery that i used very frequently for flashing and backups. And I have always disliked the fat android in the background that used to pop up whenever i flashed something! (No offence to any CWM developer, it is just my opinion)
There isn't much that i could have customized as touch sources of Clockworkmod recovery are not open source, but i did all i could and the way i like it.
Works on all ROMs, 4.1.2 (official), 4.2.2 (official and leaked) and all AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc).
I'll try and keep the modded Clockworkmod Touch recoveries up to date for i9082 with all the latest changes.
Custom Modifications:
-> Changed the background of CWM (Text is now more readable than stock look)
-> Removed the animation in the fat Android's stomach
-> Removed the fat Android itself
-> Placed a "good-looking" android on the right of the screen so that it doesn't interfere with the text when flashing
-> Internal memory support added (When the CWM version is made, by default it only allows External SD card to be accessed)
-> Adjusted the Clockworkmod logo to be more visible and text more readable
-> Moved progress bar to the bottom edge (Let's face it, it isn't that useful anyways. It's the text and the log that matters more)
How to flash them?
-> You can use any currently running custom recovery in your phone to flash these new recoveries.
-> Download the recovery that you want.
-> Put the recovery on your SD card (Internal or External)
-> Flash using your current custom recovery!
Latest unmodified Clockworkmod Touch Recovery is also in the Downloads if you wish to revert back to the old look and feel.
When you get bored out of your CWM Touch Recovery's look, just flash a new one from within the old one. Everything changes!
Make your phone look like YOU OWN IT in every possible way!
DOWNLOADS
Below are all CWM/TWRP/Philz Recovery flashable zips.
For ODIN Flashable unmodified CWM Touch Recovery files, check HERE or HERE
Date: 8th September 2013
Clockworkmod Touch Recovery v6.0.3.6
Latest unmodified Clockworkmod Touch Recovery v6.0.3.6
AFH | MEGA | DROPBOX
Blue Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Big Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Black Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Light Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Green Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Red Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
IMAGE GALLERY
For full size pictures
CLICK HERE
Credits:
Koushik Dutta
CWM Team
chotu222
pawtip
DBZo07
And all the hardworking and talented developers of Galaxy Grand i9082
Reserved....
Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app
CyberZ-JB said:
Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes! It is more readable and better looking now.
Touch based recovery's source isn't open source (yet). So can't make changes to that (as of now).
CyberZ-JB said:
Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
scrolling is same as its in any other CWM of any device!
@xenon92
superb bro!! The one you gave me to test is my favorite color!! thanks dude!
Is it based on 4.2.2 recovery.img ?
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Is it based on 4.2.2 recovery.img ?
Click to expand...
Click to collapse
It's based on the latest 4.1.2 recovery image. I built CWM Touch Recovery from 4.2.2 INU version, but it wasn't working on base 4.1.2. Then i tried recovery based on Thailand version by Mohanshbhr but that didn't work on base 4.1.2 either. In short, that means to run AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc) we need base as 4.1.2 (as of now) and anyone who has flashed 4.2.2 official Samsung ROM can't run AOSP based ROMs.
My recoveries based on 4.1.2 work on all ROMs, AOSP based, 4.1.2 Official and 4.2.2 Official.
xenon92 said:
It's based on the latest 4.1.2 recovery image. I built CWM Touch Recovery from 4.2.2 INU version, but it wasn't working on base 4.1.2. Then i tried recovery based on Thailand version my Mohanshbhr but that didn't work on base 4.1.2 either. In short, that means to run AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc) we need base as 4.1.2 (as of now) and anyone who has flashed 4.2.2 official Samsung ROM can't run AOSP based ROMs.
My recoveries based on 4.1.2 work on all ROMs, AOSP based, 4.1.2 Official and 4.2.2 Official.
Click to expand...
Click to collapse
This means I can run this on my AMF7
Thanks for the info :thumbup:
Sent from my GT-I9082 using xda premium
Works fine with my GT-I9082L with stock rom !
Sent from my GT-I9082L using xda app-developers app
good work!!!
Thank you k2wl.
thiefxhunter said:
Works fine with my GT-I9082L with stock rom !
Sent from my GT-I9082L using xda app-developers app
Click to expand...
Click to collapse
Thank you for trying on i9082L. Updated the OP that these work on i9082L as well. I hoped they would, but couldn't have confirmed without someone testing it.
Installation Query
I have read these installation instructions.
You can use any currently running recovery in your phone to flash these new recoveries.
As I am noob & am terrified at the loss of use of phone if something goes wrong. I just want to know can I flash this using stock recovery on 4.2.2 Inu version? also is there is any need to flash fix recovery file to make this recovery permanent?
drshreenivaas said:
I have read these installation instructions.
You can use any currently running recovery in your phone to flash these new recoveries.
As I am noob & am terrified at the loss of use of phone if something goes wrong. I just want to know can I flash this using stock recovery on 4.2.2 Inu version? also is there is any need to flash fix recovery file to make this recovery permanent?
Click to expand...
Click to collapse
You need to have a custom recovery already installed before you install any one of these. So first you need use ODIN to replace stock recovery with a custom one, and if it is your first time rooting your phone and putting a custom recovery, read extensively before you do so. You can use thread by chotu222 that i have linked in the OP. You'll need to flash Fix Recovery only once when you are replacing stock recovery with a custom one. Then you can flash other custom recoveries from within the recoveries themselves.
Sent from my iPad using Tapatalk
nice work....
Updated the OP with the latest CWM Non-Touch Recovery v6.0.4.4. Compiled from CM10.2 source code.
Even i don't use CWM Recovery anymore. Philz Recovery has everything that I need. CWM Non-Touch Recovery v6.0.4.4 was just lying there on my HDD for the past few days so i upload it.
Where is latest CWM Touch based recovery v6.0.4.4?
Ans - Read OP. (Post #1)
grrt Work!!!!!!!!!!!!!:good::good:
OP updated with recovery flashable v6.0.4.5 Non Touch ZIP for CM11 (kitkat). It is pawitp's recovery repacked by me in a flashable zip file. All credits to pawitp for the recovery.
after flashing this cwm via recovery,the phone is stuck in sgg bootlogo;help me out here please
has any1 had this problem?
joker705 said:
after flashing this cwm via recovery,the phone is stuck in sgg bootlogo;help me out here please
has any1 had this problem?
Click to expand...
Click to collapse
I tested the v6.0.4.5 zip by flashing it on TWRP, CWM v6.0.4.4, CWM v6.0.3.6, Philz recovery. It worked from all recoveries. On which recovery did you flash it?
EDIT: Over 40 ppl have downloaded the zip in the last 9 hours and no one else has reported issues..
Sent from my iPad using Tapatalk
Hello, here is the kernel & recovery of my favourite for AOKP 4.4.2 ROM (Other ROM I didn't test but you may try).
Fyi, I am running AOKP ROM on my ZR but I dislike the recovery that came with it as it doesn't respond to touch. And I found that Beanstalk ROM is using the recovery with touch support.
Together with the emerge of MEOW kernel, I figure out that I can use the script to flash the kernel & recovery that I want through recovery instead of using flashtool (in case of no access to computer).
Basically this (the kernel & touch recovery) wasn't my work. All I did was just decompile and pulled the files (touch recovery from Beanstalk ROM & kernel from AOKP ROM & installer script from MEOW kernel flashable zip).
So all the credits go to respective developers. I am here just to share the MOD as I haven't found much flashable zip for kernel and recovery.
Thanks them here:
Beanstalk ROM thread: http://forum.xda-developers.com/showthread.php?t=2535736
AOKP ROM thread: http://forum.xda-developers.com/showthread.php?t=2559339
MEOW Kernel thread (temporary, the developer is jeroenqui): http://forum.xda-developers.com/showthread.php?t=2621532
So here's the zip for you guys:
View attachment touch_recovery_aokp_4.4.2.zip
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Huge thanks to @Phil3759 for this excellent work! and for posting it for the Xperia Z1 (honami)... this version is a DIRECT port from the Z1 !
To enter recovery keep tapping the VOLUME UP key when you see the Sony bootlogo!
Download links
Kernels will be provided as recovery flashable update.zips! If you dont have existing recovery just open the kernel package using WinZip/WinRAR/7zip extract the boot.img and flash it using fastboot!
FW: 17.1.1.A.0.402
Advanced Stock Kernel with PhilZ Touch Recovery v01
MD5HASH: 4ee05a3545eb54b8c5f5824cff84e2f7
regards,
DooMLoRD
XDA:DevDB Information
[sirius][CWM Advanced Edition] PhilZ Touch {UNOFFICIAL}, Kernel for the Sony Xperia Z2
Contributors
DooMLoRD, Phil3759, [NUT]
Kernel Special Features: Stock kernel with PhilZ Touch Recovery inbuilt!
Version Information
Status: Stable
Created 2014-05-27
Last Updated 2014-05-27
:good:
Uploaded to main thread and goo server
Phil3759 said:
:good:
Uploaded to main thread and goo server
Click to expand...
Click to collapse
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
DooMLoRD said:
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
Click to expand...
Click to collapse
Please remind me in a few days when I update my repo to better support f2fs code
Will repo sync and rebuild for you
Just remind me as I am going to forget it
Is this just stock kernel. With Philz Touch added.
nintendolinky said:
Is this just stock kernel. With Philz Touch added.
Click to expand...
Click to collapse
yup
DOOMLORD, first of all thanks for your work.
any progress rooting and flashing this to the locked bootloader models?thanks
DooMLoRD said:
yup
Click to expand...
Click to collapse
Ok, in your kernel thread it states it has Philz Touch, but ivr never been able to get it load other than straight after flashing it. Is there an issue somewhere, even if i use your reboot app, it reboots either into twrp or cwm, which i can use, so not a huge issue, would just prefer to use Philz. Thanks.
Sent from my D6503 using Tapatalk
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
BanziBaby said:
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
Click to expand...
Click to collapse
Yes, it's dedicated for the .402 update
Your plan is valid, although keep in mind that Doomkernel has also Philz integrated.
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
BanziBaby said:
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
Click to expand...
Click to collapse
it is the stock kernel the ramdisk has been "edited" to include philz recovrey
Hi OP,
I am using Build version: 6.29.8 - Xperia Z1 on Xperia X2 D6503.
(maybe slightly older than the latest one?)
I just tried to "Custom backup" my /sdcard partition for file recovery purpose.
However, the "Backup size" was 0.
So i wonder if the backup "sd-ext" function is still working on the PhilZ version.
Thanks in advance.
Will this work on D6502 and do i need an unlocked bootloader for it. Please somebody suggest. Thanks
ive flashed this
however i cant seem to access the recovery partition?
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
S M G said:
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
Click to expand...
Click to collapse
If you flash CM11 then you will have CM11 kernel
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
S M G said:
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
Click to expand...
Click to collapse
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
waynekirby said:
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
Click to expand...
Click to collapse
DAMN !
Okay thanks for the info mate. :good: