stuck in cwm - Xperia SP Q&A, Help & Troubleshooting

hello friends, having root access and unlock the bootloader and install cwm I went into recovery mode selected to install. external zip card and not me no option appeared and the phone does not come out of recovery!
is there any way I can force the reiniar? or will I have to wait if the battery runs out?
Thank des already, bought my xperia today ..
excuse my bad english:crying:
already tidy! may disregard ..

Backcover away and with a pen or something else push on the small button under the battery.
Gesendet von meinem Xperia SP

Related

GT-I9305, Need Help, display stays black

Hi,
I have installed custom Rom rxtreme and custom cwm. Some days ago I had left my screen on over night. The next day the colours of the display fadet. I switched of the screen, tried a reboot. After this the display didn´t show anything at all, it only glows in a purple colour. I can use the phone with my hdmi-dock, but can´t use hdmi with cwm. How can i recover my original rom when i can´t see anything on the screen? I want to restore the original rom, wich i have on sd-card.
Hi !screen is total black also in recovery?you can try to flash the original rom with odin :good:
stecca82 said:
Hi !screen is total black also in recovery?you can try to flash the original rom with odin :good:
Click to expand...
Click to collapse
HOW with no screen to see .
OP you will need to boot to recovery and restore nandroid >> no screen will require judgement of the correct key stokes .
But download mode would be easier as its the standard three buttons followed by vol up once .
jje
Hi, thanks for your responses. I finally managed to go back to stock with Samsung Galaxy S3 unified toolkit
Gesendet von meinem GT-I9001 mit Tapatalk-4 now Free

[Q] S4 active stuck in "samsung galaxy s4 active i9295" screen

Help! I am still a newbie here.
So, I was excited to manually flash the official kitkat firmware for i9295, so i downloaded it from the internet.
But i couldn't explain what happened. Formerly, my phone was running a Carbon Rom "CARBON-KK-UNOFFICIAL-20140514-0523-jactiveltexx",
with clockworkmod recovry 6.0.3.5 (i think).
while waiting for the Official Kitkat Rom to finish downloading, i went and went to CWM recovery and wipe data, factory reset, and dthings like that etc. and starting the phone again.
Until It got stuck in the start screen of the phone which shows " Samsung Galaxy S4 Active i9295"
Please Help! I have been searching everywhere but there is no such solution to be found.
Please help! Even when i charge my phone, there is no animation, it just shows the battery with the circle and it freezes!
I will post pictures when i get a capturing device, please help me if you know a solution
Just start your phone in download mode (volume down + home + power) and install kitkat with odin
Gesendet von meinem GT-I9295 mit Tapatalk
I already did it
4cr0ph3t said:
Just start your phone in download mode (volume down + home + power) and install kitkat with odin
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
I tried to flash back the official stock firmware 4.2.2 but odin kept saying "no Pit partition" or something like that,
Then I include the Pit file for i9295 but it kept saying "FAIL, Re partition failed" or something like that

[Help Required URGENT] - N7000 no download mode no recovery

Hi all,
Recently my Nexus 4 broke, and I had to borrow an old N7000 from a friend. It was running 4.2.2 when I got it. I downloaded the correct firmware (DDLSC) for rooting it & flashed it through ODIN. It rooted perfectly & I was able to install the latest Philz recovery through the CWM. Through Philz, I was able to install the Resurrection Remix ROM (CM12) & Forest Kernel perfectly. I used it for a few days and then I also updated it 2-3 times. A simple flash was causing FC's so I had to do a full wipe everytime. But everytime I booted into recovery, It opened up the CWM instead of Philz. So, I had to install latest Philz first, then reboot recovery & install the ROM.
Last week, I decided to change the ROM to Nightowl BETA 5 (which is also CM12). I used the same procedure, full wipe & install. Most of the time, it would boot into CWM by default. I don't know why Philz wasn't getting installed permanently. Sometimes, it broke the root & stuck at bootloop. So, I had to install CWM again. And again. The custom binary count had already reached 3.
Nightowl BETA 5 also worked correctly. after a few days, I downloaded BETA 6 & tried to install it. Same way - full wipe & flash. It flashed & booted once. But the battery went dead after a few hours & I connected it to the charger & tried to boot it but it didnt boot at all. I have been trying to get it to boot for a few days now but nothing.
It shows the charger sign only when connected (either to laptop or charger, no boot, no connection). While connected, I tried to get download mode. It went upto the warning sign, where I have to press volume Up to continue. After pressing volume Up, no download mode, it goes back to the charger.
I bought a USB jig yesterday & tried to get download mode using the instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=2084222
During all the steps, I get only a black screen. Nothing else.
Now it's only in the charger mode & no boot, no recovery, no download mode(except warning). Any & all help to get me out of this situation will be appreciated. I have to return it to the friend I borrowed it from ASAP & in working condition.
Why do you flash a borrowed phone? [emoji32]
Guess you have to pay for the phone then... STUPID!
Gesendet von meinem GT-N7000 mit Tapatalk
JulGer01 said:
Why do you flash a borrowed phone? [emoji32]
Guess you have to pay for the phone then... STUPID!
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
Thank you for your valuable response........umm.......I followed your instructions......the phone still doesnt work at all.
Your phone bricked you need to change inside something called emmc chip
Sent from my GT-N7000 using XDA Free mobile app
Flash forest kernel again.
Sent from my C6603 using XDA Free mobile app
zikay said:
Flash forest kernel again.
Sent from my C6603 using XDA Free mobile app
Click to expand...
Click to collapse
How can he do that when he can't open recovery or download mode.

[Q] Xperia SP does not respond at all

Hello everybody
I have a big problem with my Xperia SP. I tried to flash the last PACMAN ROM on Lollipop 5.1.1 but when I reboot my phone nothing happened. Just a dark screen with one vibration if I press on the power button. I tried to connect the phone in flash mode with my PC and it's not because my battery is down (78 percent before the flash)
Thanks for your help and I apologyse with my English but I'm French .
Stratokraken said:
Hello everybody
I have a big problem with my Xperia SP. I tried to flash the last PACMAN ROM on Lollipop 5.1.1 but when I reboot my phone nothing happened. Just a dark screen with one vibration if I press on the power button. I tried to connect the phone in flash mode with my PC and it's not because my battery is down (78 percent before the flash)
Thanks for your help and I apologyse with my English but I'm French .
Click to expand...
Click to collapse
Google for a tool named "Emma". It gets your device back to stock rom.
Then, start from scratch.
There may be faster ways, but this is the easiest-one!
And you don't have to apologize for your English, it's good enough
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1
Kaffeetrinker said:
Google for a tool named "Emma". It gets your device back to stock rom.
Then, start from scratch.
There may be faster ways, but this is the easiest-one!
And you don't have to apologize for your English, it's good enough
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1
Click to expand...
Click to collapse
Thank you for your response and for Emma, I don't know that but I found a soluce alone. If anyone had the same problem, just hold all the button and the led flash after 10 secondes. Now it works with Flashtool, just flash a Ftf Rom.

Razi XT890 Flash failed?

I finally got RSD to accept my phone and file and during process 7 it failed.
Now all I get is a Red Moto Logo?
What can I do?
Same problem here, cant access fastboot or any other recovery. equal which combination of power and vol up or down. anyone got an solution?
PlusOne3k said:
Same problem here, cant access fastboot or any other recovery. equal which combination of power and vol up or down. anyone got an solution?
Click to expand...
Click to collapse
Somehow I made my phone Boot by taking out SD card.
Try it, it boots mine ok and I may give up Updating to KK until someone replies.
Yes, that worked for me. Thanks.
Gesendet von meinem A0001 mit Tapatalk

Categories

Resources