Related
A word about how this thread came about:
Our highly respected developer Utacka got fed up with 4.2.1 ETA inquiries, feature requests and questions posted by those with no inclination to read or search anything, not even the OP.
We need to let Utacka have some respite from those in order to not lose him altogether.
So, I'll be compiling Utacka's ParanoidAndroid nightlies for him and Utacka will be releasing a weekly build for the time being.
Downloads here are and will always be untouched Utacka PA builds compiled from his source at Github. Nothing added, nothing subtracted, nothing modified.
Roms here and Roms in the original Utacka ParanoidAndroid thread are identical, you can download and flash any of them, and you'll be getting the same Utacka PA experience.
Let us begin.
Utacka said:
Android 4.1.2
ParanoidAndroid 2.56
Source compiled
You can follow the PA-JB Progress for Galaxy Nexus in this thread: http://forum.xda-developers.com/showthread.php?t=1619582
Follow Paranoid Android officially on:
Facebook : https://www.facebook.com/paranoidgoogle
Twitter : https://twitter.com/paranoid_team
G+ : http://goo.gl/e3tKJ
Click to expand...
Click to collapse
Utacka said:
Prologue
This is NOT a port.
This is the FIRST PA ROM that is built from source for GT-N7000 and I'm providing these builds on a nightly basis when there is changes from CM or PA.
Click to expand...
Click to collapse
Utacka said:
Githubs:
https://github.com/Utacka
https://github.com/ParanoidAndroid
https://github.com/CyanogenMod
Click to expand...
Click to collapse
How to install Utacka ParanoidAndroid Rom.
It doesn't matter which Rom you are coming from, all that matters is the kernel you are on.
If you are running any CM-based kernel (CM9, CM10 or CM10.1)
If you are running any Gingerbread kernel
If you are running Hydracore or HydracoreNirvana
If you are on Franco ICS kernel newer than v3
If you are on Speedmod ICS kernel newer than v3
If you are running PhilZ kernel v3.99 or newer
Code:
1. download ParanoidAndroid Rom and Gapps
2. place them on your SD card
3. reboot into recovery
4. wipe data/factory reset
5. wipe cache and dalvik
6. flash the Rom
7. flash Gapps
8. reboot
If you are on any PhilZ kernel older than v3.99
Code:
1. download any CM10 kernel from Kernel Repository
2. download ParanoidAndroid Rom and Gapps
3. place all three files on your SD card
4. reboot into recovery
5. flash the CM10 kernel first
6. stay in recovery, go to advanced/reboot recovery
7. wipe data/factory reset
5. wipe cache and dalvik
6. flash the Rom
7. flash Gapps
8. reboot
Kernel Repository is here.
If you are running a kernel not mentioned above, go here and read extra carefully before doing anything.
If you are already on any previous Utacka ParanoidAndroid 2.56 build
Code:
1. download the new build and Gapps
2. put it onto your SD card
3. reboot into recovery
4. wipe cache and dalvik
5. flash the Rom
6. flash Gapps
7. reboot
ROM SCREENSHOTS
DOWNLOADS
pa_n7000-2.56-20121230-Utacka.zip
pa_n7000-2.56-20121231-Utacka.zip
pa_n7000-2.56-20130101-Utacka.zip
pa_n7000-2.56-20130102-Utacka.zip
pa_n7000-2.56-20130106-Utacka.zip
Bangsti's FTP mirrors:
FTP Server 1
FTP Server 2
gapps-jb-20121011-signed.zip
A final word: please consider donating Utacka for all the tremendous work he has done and is still doing to make all our Notes faster, smoother and better looking.
Do not, I repeat, do not donate to me. What you are enjoying here is Utacka's work, not mine. I just deliver his craftsmanship to you, that's all.
A word of caution to everyone:
This thread will not be allowed to degenrate into a post garbage that has nearly driven Utacka away.
Ask for 4.2.1 ETA, you will be reported.
Ask "How I flush this...?", you will be reported.
Demand features....you guessed it, you will be reported.
Discuss Thor kernel/recovery, you will be reported.
Complain about problems without submitting a logcat/last_kmsg, you will be reported.
Report issues that have already been reported and discussed ad nauseam, you will be reported.
Ask for S-apps to be included in the Rom, you will be reported.
To cut the long story short, this thread will be heavily moderated, so watch your step.
You have been officially warned.
Furhermore, officer in command of this thread is AA1973. The minute he tells Utacka or me he's had enough, this thread is closed, so don't make him mad.
Reserved for ...my personal thank you @utacka for providing countlessly this amazing ROM!
Reserved for FAQ - frequent annoying quastions™
You're new to Paranoid Android or it has been a long time since you last flashed PA?
Then, feel free to take the quick and guided tour, which will take only 2 minutes.
Go into settings > PA settings and hit the Help tab.
There you'll find the guided tour and the different layout possibilities well explained.
You're invited to replicate the layout/density feature at best with YouTube, as it has the upmost possible combinations.
Furthermore, you'll find all members of the PA team, including molesarecoming and D4rkn3Ssys, the founders of PA.
General, for some members important, question about this version by utacka and the PA Version by imilka?
Utacka PA = Nightly basis (unofficial PA way)
imilka PA = PA version bumps (official PA way)
That's it, no other difference at all.
Nightly basis signifies that you can flash utacka's version on a daily basis, because as soon as CM10 (=the base) changes, utacka updates as well. If you can cope with this method of flashing on a daily basis, then this is your place. If this means too much hassle for you to keep up, then you should reconsider your choice and probably go for imilka's version.
Some FAQ
Screenshot not working:
Either the native functionality (Volume down + Power button) or long press power button and then choose "Screenshot".
If the latter is not available yet, activate it in System settings > System > Power
I seem to have no status bar (notification bar)
Long press power and click "Expanded Desktop".
Always wondered, what this is useful for? Just use phone layout and navigation bar at the same time and choose Camera. You'll see 3 little dots (the navigation bar symbols) shining through. You can avoid it by this function.
Other terms of use: video playing or within games, where notification bar won't disappear automatically.
My Google account is lost and play store doesn't work!
You have forgotten to flash GApps as well.
Flash ROM
Flash GApps
That's the standard procedure after updating PA version...even on a nightly (daily) basis!
RIL Crashes
Media Scanner
I do really want to use Inverted GApps -> personally, I use JusTun Beans inverted GApps
Some rules
1. I'm going to post my question without doing a search. Fine, but you'll just get made fun of, or infracted by one of the mods who use this mod. Searching is the first rule of XDA. "1. Search before posting. Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news."
Some hints for XDA-app or tapatalk Users: the search function within the app is very limited!
If you really want to search, just hit on any post and then the menu button in order to choose web view. Then, within the browser of your choice, you can easily do the search you want. There is the possibility called "Search this thread"...
2. People have a bad attitude in this thread. You broke rule #1, didn't you?
3. Do I really have to do a full wipe while coming from another ROM? No one is going to stand over your shoulder and make sure you do, but don't expect help if you don't.
4. My recovery freezes, gives me some other weird error (Status 7, or similar)
Redownload ROM (GAPPS) and flash again as you have encountered maybe a bad download.
Checking MD5 helps.
Tool to check MD5 is e.g. Solid Explorer Beta2
_________________________________________
Q: Where are S-apps (Note, Memo, Planner etc)?
A: They require TouchWiz framework to work, so you will not find them here. There are alternatives to
S-apps in Playstore.
_________________________________________
Q: I'm currently running xyz kernel. Can I flash this Rom safely?
A: Go here to find out.
http://forum.xda-developers.com/showthread.php?t=1857556
_________________________________________
Q: How do I flash this?
A: This is how. #OP
_________________________________________
Q: Oohhhh - battery drainage! (battery drains,...)
A: Have a look here:
_________________________________________
Q: Recovery aborts flashing Rom or Gapps or kernel and displays error code "status 7"?
A: You most probably have a bad download. Redownload Rom/Gapps/kernel, check MD5 and try again.
_________________________________________
Q: Flash went through OK, but now I can't sync calendar/contacts/Gmail, there's no option to setup my
Google account, Playstore won't start, where is my Picassa...?
A: You either forgot to flash Gapps, or had a bad Gapps zip (if you had flashed it).
_________________________________________
Q: Playstore says I have no apps, and I purchased them ages ago, or claims that my apps are incompatible
with the Note...?
A: Go here to find the solution to your problems.
_________________________________________
Q: Can I flash some other kernel on this Rom?
A: You can, but if something goes wrong don't post your problems here. Go to the kernel thread instead.
_________________________________________
Q: A system app keeps FCing. What can I do?
A: Go to Settings/apps and clear the app's cache and data, reboot. If that doesn't help, try to dirty reflash the Rom (just wipe cache and dalvik).
_________________________________________
Q: Gallery only shows grey squares, but no pictures, wth?!
A: Clear cache of gallery and let the media scanning process run again. That should do it!
_________________________________________
Q: Where do I find new themes?
A: Either in PlayStore or here is a thread dedicated to CM10/AOKP themes
http://forum.xda-developers.com/showthread.php?p=29455970
_________________________________________
Can we at least pull your leg by asking why SMemo is not included?
Kortxero said:
Can we at least pull your leg by asking why SMemo is not included?
Click to expand...
Click to collapse
Thanks for reminding me to include that in the 2nd post.
BTW, you are reported.
No, as it is already written in the freaking annoying quotes section as being "impissible™" on this Roma
Hence...
The wall of shame:
where (similar: what) is the OP?
Click to expand...
Click to collapse
Is S-Memo works on this room?
Click to expand...
Click to collapse
AA1973 said:
No, as it is already written in the freaking annoying quotes section as being "impissible™" on this Roma
Hence...
The wall of shame:
Click to expand...
Click to collapse
Mentioning it twice won't hurt anybody.
How about posting all the idiotic comments and 'please help me's in the old thread? That should keep this one relatively clean. :thumbup:
One question about Goo Manager: will your compilations appear as goo updates of Utacka's builds? Actually I'd rather not as I find goo notifications unnecessary.
Btw, how many roms are you currently building ? You're going to fry your Note if you keep flashing like that!
Envoyé depuis mon GT-N8000 avec Tapatalk
sudisk said:
One question about Goo Manager: will your compilations appear as goo updates of Utacka's builds? Actually I'd rather not as I find goo notifications unnecessary
Click to expand...
Click to collapse
Have I been that unclear in the OP? What you're flashing here is Utacka's ParanoidAndroid.
The only difference is that it's been compiled on a different PC.
Thanx to Utacka, Chas and AA :good: Even if I will stick with Asylum, I really appreciate your effort. Best luck with your project, and may this fred never see a "Hap, Status 7 !!111!!!1!" quastion :fingers-crossed:
Cheers, Markus
chasmodo said:
Furhermore, officer in command of this thread is AA1973. The minute he tells Utacka or me he's had enough, this thread is closed, so don't make him mad.[/CENTER]
Click to expand...
Click to collapse
Good luck to you Mister Alcoholic Anonymous... Hopefully Chas' OP will keep stupid questions away
Well, we all try our very best to keep it clean-and simple.
Tell my now! How many toogles this room has? Lame =< 23 Tongles !!1!!1!!!eleven1!!!one!!11
It has Spenotememo?
Cheers, Markus
Very well ..However if moderators educate the users about how to obtain logcat in an easy way and submit in the OP, This will help novice to report the problems in a meaningful manner .
Sent from my GT-N7000 using xda app-developers app
Vishal_Pratap singh said:
Very well ..However if moderators educate the users about how to obtain logcat in an easy way and submit in the OP, This will help novice to report the problems in a meaningful manner .
Click to expand...
Click to collapse
Srsly?
http://lmgtfy.com/?q=how+to+logcat
people are forgetting that this is development section...i think too much nonsense post and unhelpful to rom dev inputs stray away the devs...its frustrating for users who take the time to help out seeing posts by others who cant even take some minimal time to even read the OP or google search...come on mates this is xda and not sammy customer service...utilize your brain power so as others wont go on tearing up your intellect...persevere to learn...
as always props to chasmodo for keeping up with the note...always appreciated mate...and of course to our devs who work tirelessly with dedication (utacka, eybee, etc)...we always respect and value your work guys...and thanks for staying...
tehehe people got really scared wow .. 18 replies only lol
downloading and testing , thank you in advance
Sent from my GT-N7000 using xda premium
Weill said chasmodo.
Sent from my GT-N7000 using xda app-developers app
Reading the 2nd post, I suddenly caught myself standing in "attention" :good:
P.S. For those with commandlinephobia -
https://play.google.com/store/apps/details?id=org.jtb.alogcat
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this.
As a result you'll probably want to read the rest of the thread and at least be aware of what you're flashing.
You've been warned.
Android Open Kang Project for SPH-L720 (jfltespr) - UNOFFICIAL
NOTE: We've gone official! Go to the official thread by clicking here.
Future builds as of 7/20 will be for testing purposes only.
Features:
This is AOKP as it is provided in the source repos. I will be keeping it as such.
Any modifications, enhancements, etc. will be brought in and supported through their Gerrit review process.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Test Build: Unofficial jb-mr1 Milestone 2 (8/2/2013)
Tar/ZIP Mirror: [ROM][UNOFFICIAL]AOKP for SPH-L720 (Team SXTP Site)
Both contain a kernel and ROM. Latest GApps here courtesy Goo.im. Please make sure to use the current version.
Flash Instructions:
1) Back up your current system and all data if desired.
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
3) TAR - Boot to Odin Mode and flash via Odin.
ZIP - Flash ZIP in recovery
4) Flash GApps
Summary Changelog:
Code:
Unofficial (6/5/13) - Updated repos, removed beta tag
Beta (5/25/13) - Replaced bootanimation.zip with a "proper" one :D
Beta 1 (5/10/13) - Promoted to Beta based on stability results.
Older Changes:
Alpha Builds: Device Bringup
Source:
AOKP Official Repositories
CyanogenMod Official Repositories
Device Dependencies:
android_device_samsung_jf-common
android_device_samsung_msm8960-common
android_device_samsung_qcom-common
Sprint GS4 Device Repository
Please note that some slight modifications - particularly overlays - were done in order for AOKP to build.
NOTE: Due to potential copyright issues I do not include a vendor repo.
You can extract the files from the phone or ROM as needed - should you decide to build on your own.
Credits:
Early Bringup Advice: Entropy512, Shabbypenguin, Cordell12
Current Mentor/Collaborator: Noobnl (CM CDMA Maintainer), BMc08GT (AOKP Maintainer)
If it's working this well, likely they've had a big hand in it!
Testers: Mohogalore, robbyamor, crawj and others
Steve Kondik (Cyanogen) for CM development and jf common work
The CM maintainters who continue to improve CM along with Mr. Kondik
Team Kang for AOKP
...and of course! You, the community, for your support as well! Thank you!
Lift off!
Call issues, like cm (won't hangup) are present. MMS receiving not there. So mirrors the same issues.
Sent from my SPH-L720 using Xparent Skyblue Tapatalk 2
Alpha 2 posted with same fix as CM Beta 3. Had the time since little one was up late last night...:angel:
Nice to see some awesome development happening for the S4.
garwynn said:
Alpha 2 posted with same fix as CM Beta 3. Had the time since little one was up late last night...:angel:
Click to expand...
Click to collapse
Initial results (very early testing) screen shots attached.
Working:
Outgoing Calls
Incoming Calls
SMS
Outgoing MMS
Not Working:
Incoming MMS
Alpha 2 Test Results
MoHoGalore said:
Initial results (very early testing) screen shots attached.
Working:
Outgoing Calls
Incoming Calls
SMS
Outgoing MMS
Not Working:
Incoming MMS
Click to expand...
Click to collapse
Very glad to report there is forward progress ...
Flashed Alpha 2...
booted right up this time, no black display... yea
No random reboots! (fingers crossed )
placed out going call ...connected fine. can now hear other party. End call immediately... no more hang/power down/pull battery/ etc
received incoming call... connected fine. again, can now hear each other. End call immediately...
send and receive SMS fine
MMS can send out,(slowly...) but recipient does get it
MMS can NOT receive
from recipient, I get a button to download, when I press to DL it says downloading but I don't get it...notification bar says message not DL...
watched QBKing77 youtube video GREAT display!!!
Dropbox uploads/downloads works fine
Web Browsing works fine
WiFi works fine
HotSpot Works fine(had to manually turn WiFi back on after using HotSpot)
Camera works fine... can store to sd or internal... zoom/panoramic/video... ALL WORK
gallery... Works fine
GPS/Maps.. no go tried gps fix from market... no go... tried the old trick "back to stock, get lock, back to cm"... NOT working yet.
I do NOT have LTE in me area yet to test
I do NOT have any Blutooth products to test
WOW this is amazing to see AOKP so soon your the man! if you guys need any help let me know im still a noob when it comes to development but im no stranger to flashing and what not. thanks for all your efforts
xxaddictedxx said:
WOW this is amazing to see AOKP so soon your the man! if you guys need any help let me know im still a noob when it comes to development but im no stranger to flashing and what not. thanks for all your efforts
Click to expand...
Click to collapse
Want to help??? follow the links in POST# 1 to the DownLoad, nand then flash the ROM... test everything you can think of.., Report any and ALL good and bad issues so GARWYNN can know what works and what doesn't,
Currently we have the phone to test... he needs our input, he doesn't have it yet... but will soon !!! WHAT A MONSTER lol creating the ROM and doesn't heve the phone... YES, He is da man !
So PLEASE jump on in and help...
ok so heres what i got. i booted into recovery (currently using TWRP) wiped dalvik,cache and system. first go around i flashed gapps and rom together.flash seemed to work as it normally does but did not get past boot animation. second attempt i wiped dalvik, cache and system and flashed just the rom no gapps and made it to the boot animation and then i started boot looping. so my question is....in your op u say to use CWM specifically so would me using TWRP be causing the issue of the rom not booting?
instructions for testing
xxaddictedxx said:
ok so heres what i got. i booted into recovery (currently using TWRP) wiped dalvik,cache and system. first go around i flashed gapps and rom together.flash seemed to work as it normally does but did not get past boot animation. second attempt i wiped dalvik, cache and system and flashed just the rom no gapps and made it to the boot animation and then i started boot looping. so my question is....in your op u say to use CWM specifically so would me using TWRP be causing the issue of the rom not booting?
Click to expand...
Click to collapse
That is a good question but I don't think it would cause the problem. If you will, for testing, go ahead and get CWM since OP said to use. Let me know if you need a link.
Steps for flashing should go as follows so that testers all use same procedure in same order.
Put ROM and gapps on ext SD card
boot to CWM
wipe cache
wipe dalvik cache
reset factory data
flash ROM
reboot
test as much as you can 3g, 4g, wifi... note any problems
if you have problems, go to menu>system settings>backup & reset>Factory data reset
Test the problems again and note results
boot to CWM
wipe cache
wipe dalvik cache
flash gapps
reboot and go through setup
test as before... as much as you can and note any problems
Note that it will take longer to reboot after flashing as it will rebuild dalvik/cache, etc. so git it plenty of time at first boots.
Post ALL results, good. bad, ugly, pretty,... in here so Garwynn can know what works and doesn't. Be as detailed as possible.
THANK YOU FOR HELPING
ok actually i figured it out and this will flash through TWRP but it is necessary to wipe data as well when coming from a differant rom. seems that if you dont it will hang on the boot animation and not go any further. i dont know how this will affect the "dirty" flash in the future for new updates. followed procedure and so far it looks good.will report back when i have had a chance to test more.
xxaddictedxx said:
ok actually i figured it out and this will flash through TWRP but it is necessary to wipe data as well when coming from a differant rom. seems that if you dont it will hang on the boot animation and not go any further. i dont know how this will affect the "dirty" flash in the future for new updates. followed procedure and so far it looks good.will report back when i have had a chance to test more.
Click to expand...
Click to collapse
THANK YOU FOR HELPING TEST... & Thanks for the update, Remember that in general, it is standard recommendations, that EVERY time you go from one ROM to another, you need to wipe DATA. I stated that in the flash instructions. As far as a DIRTY flash, it is "usually" ok if the update is of the same minor of the current ROM (X.0.1 to X.0.5). But when a ROM goes to a major update from one ver to a whole ver, ( 7.x.x to 8.x.x ) a DIRTY flash isn't recommended. That's not to say you absolutely can't DIRTY flash, just much more likely you will encounter problems and then want to "blame" it on the ROM update when in fact it is the result of the DIRTY flash not the ROM.
This is not to say you have or will, but it needs to be clear ... PLEASE do NOT DIRTY flash while testing these builds for garwynn ! ! ! We are trying to eliminate any outside causes of issues. A CLEAN flash will insure that we report errors specific to that build in testing... again, PLEASE DO NOT DIRTY FLASH.
rlmiller said:
That is a good question but I don't think it would cause the problem. If you will, for testing, go ahead and get CWM since OP said to use. Let me know if you need a link.
Steps for flashing should go as follows so that testers all use same procedure in same order.
Put ROM and gapps on ext SD card
boot to CWM
wipe cache
wipe dalvik cache
[*]reset factory data
flash ROM
reboot
test as much as you can 3g, 4g, wifi... note any problems
if you have problems, go to menu>system settings>backup & reset>Factory data reset
Test the problems again and note results
boot to CWM
wipe cache
wipe dalvik cache
flash gapps
reboot and go through setup
test as before... as much as you can and note any problems
Note that it will take longer to reboot after flashing as it will rebuild dalvik/cache, etc. so git it plenty of time at first boots.
Post ALL results, good. bad, ugly, pretty,... in here so Garwynn can know what works and doesn't. Be as detailed as possible.
THANK YOU FOR HELPING
Click to expand...
Click to collapse
understood it was one of those DUH moments lol. i was wiping system and not wiping data with it and then sitting back wondering why it wasnt working. :banghead:
ok so i have been running solid for the entire morning and i have to say that this is ready to at lease be in beta stages. heres what i have done:
flashed rom only
made 5 test calls out and received 5 calls (very minor echo on 2 of the calls) but barely noticable
sent 3 sms and received 3 sms
sent 3 mms and received 3 mms
tested data 3 times toggling mobile data after each connect
got gps lock 4 out of 5 times
tested front facing camera 3 pics
tested regular camera 3 pics
tested video 25 seconds
powered device on and back off again 3 times
reset device 3 times
made changes to pretty much everything i can think of in rom controls
connected to wifi 3 times
connected to 3 seperate bluetooth devices
flashed gapps
tested all of the above again
this time no echo on calls
gps locked every time-5 times
i dont have 4g in my area to test
basically the only issue i have run into was the gps not locking once and then the minor call echo....other than that this rom is buttery smooth and full of goodness great work!!
At the moment I'm moving everything back to the primary build box. Next build will be promoted to Beta.
Side note: I was building on a Q9400, 8GB RAM and took 2 hours on a clean build.
Did it on the primary build box - a laptop Core i5 (dual core, multi-threaded) and it still cut the build time in half.
Just a heads up.....after receiving a few more calls I have noticed that upon trying to answer the screen will sometimes not respond to touch and must be toggled in order to register. Its annoying at worst not a deal breaker but if I can replicate the issue again I'll pull a logcat for ya
Sent from my SPH-L720 using xda app-developers app
so i have not had the issue with the screen being unresponsive again and i've been on my phone all day taking and making calls so imma write that off as just being a rom settling in issue. however all this morning when i receive an mms msg in stead of showing me the picture i am diverted to an empty text as if i were creating a new one. i can send them just fine as i have done a bit more testing since the issue arose and now im also unable to get a gps lock as well. everything else seems to still be working normally
after a couple hours test i find that calls in and out work but volume on both ends is terribly low. wifi unsecured and usb tether works on usb2.0 my 3.0 port would only pop up with select network type after i unplug it. bluetooth wouldn't connect. bluetooth headset works with calls with the very low volume as well and media regular volume. although it took a couple tries to connect but it did. mms is no good would receive but not dl. could send tho. gps works good 10/18 with gps status. maps said it was within 20 meters but if i leave it on i bet it gets better. no lte. of all my apps i restored with tb only beautiful widgets doesn't access internet or gps. re-downloaded bw and still no access. theme chooser works. so far everything seems stable and responsive. im going to continue running it see what happens
panorama camera display in landscape is sideways and smaller but it still takes the pic right
New release beta 1 (5/10/13)
Mohawka said:
after a couple hours test i find that calls in and out work but volume on both ends is terribly low. wifi unsecured and usb tether works on usb2.0 my 3.0 port would only pop up with select network type after i unplug it. bluetooth wouldn't connect. bluetooth headset works with calls with the very low volume as well and media regular volume. although it took a couple tries to connect but it did. mms is no good would receive but not dl. could send tho. gps works good 10/18 with gps status. maps said it was within 20 meters but if i leave it on i bet it gets better. no lte. of all my apps i restored with tb only beautiful widgets doesn't access internet or gps. re-downloaded bw and still no access. theme chooser works. so far everything seems stable and responsive. im going to continue running it see what happens
panorama camera display in landscape is sideways and smaller but it still takes the pic right
Click to expand...
Click to collapse
THANKS GARWYNN...
Check OP ... new 5/10 daily... Follow install instructions...
CLEAN FLASH
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
garwynn said:
DISCLAIMER:
Your device, your responsibility. I am not liable for anything you flash, including this.
As a result you'll probably want to read the rest of the thread and at least be aware of what you're flashing.
You've been warned.
Android Open Kang Project for SPH-L720 (jfltespr) - UNOFFICIAL
Features:
This is AOKP as it is provided in the source repos. I will be keeping it as such.
Any modifications, enhancements, etc. will be brought in and supported through their Gerrit review process.
Latest Test Build: Daily Repo Sync/Build (5/10/2013)
Tar/ZIP Mirror: [ROM][BETA][UNOFFICIAL]AOKP for SPH-L720 (Team SXTP Site)
Both contain a kernel and ROM. Latest GApps here courtesy Rootzwiki. (3/1/2013)
Flash Instructions:
1) Back up your current system and all data if desired.
2) In your favorite custom recovery, wipe data, cache and dalvik.
If you want to flash the ZIP version you'll need to format system as well.
3) TAR - Boot to Odin Mode and flash via Odin.
ZIP - Flash ZIP in recovery
4) Flash GApps
Summary Changelog:
Code:
Beta 1 (5/10/13) - Promoted to Beta based on stability results.
Older Changes:
Alpha Builds: Device Bringup
Source:
AOKP Official Repositories
CyanogenMod Official Repositories
Device Dependencies:
android_device_samsung_jf-common
android_device_samsung_msm8960-common
android_device_samsung_qcom-common
Sprint GS4 Device Repository
Please note that some slight modifications - particularly overlays - were done in order for AOKP to build.
NOTE: Due to potential copyright issues I do not include a vendor repo.
You can extract the files from the phone or ROM as needed - should you decide to build on your own.
Credits:
Early Bringup Advice: Entropy512, Shabbypenguin, Cordell12
Current Advisors/Collaborators: Noobnl (CM CDMA Maintainer)
Testers: Mohogalore, robbyamor, crawj and others
Steve Kondik (Cyanogen) for CM development and jf common work
The CM maintainters who continue to improve CM along with Mr. Kondik
Team Kang for AOKP
...and of course! You, the community, for your support as well! Thank you!
Click to expand...
Click to collapse
Would you guys call this more or less stable than SlimBean?
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Official CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/CyanogenMod
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-BT voice search
ROM: http://download.cyanogenmod.org/?device=n5110
****** All links below this are UNOFFICIAL builds ******************
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997662
Changes:
- Initial Release
[8/27] ROM: http://www.androidfilehost.com/?fid=23060877490002894
Changes:
- Upstream CM changes
[9/12] ROM: http://www.androidfilehost.com/?fid=23134718111252562
Changes:
- Fixed graphical glitches / black screens
- Upstream CM changes
[9/20] ROM: http://www.androidfilehost.com/?fid=23134718111254117
Changes:
- changed to tvdpi (fixes icon blur)
- Upstream CM Changes (including netflix fix!)
[10/08] ROM: http://www.androidfilehost.com/?fid=23159073880934700
Changes:
- Boost speaker volume slightly
- Add opensource camera (fixes front cam freezing)
- Upstream CM Changes
[10/10] ROM: http://www.androidfilehost.com/?fid=23159073880935566
Changes:
- Updated to 4.3.1
- Add IRDA service/support (needs testing)
- Opensource Sensors (fixes incorrect light_sensor reading really high instead of 0 or -1)
- Correctly read Wifi mac address
- Charging tweaks (need charging speed tested)
[10/14] ROM: http://www.androidfilehost.com/?fid=23159073880936401
Changes:
- Upstream CM Changes
- Fix Haptic feedback for back/menu keys
- Fix screen staying on while tablet is off and charging
[10/23] ROM: http://www.androidfilehost.com/?fid=23189362627840660
Changes:
- Upstream CM Changes
- Fix magnetic cover support (turn on/off screen)
- Fix Bluetooth (99% sure this is good, can anyone else confirm?)
- Fix wifi mac address again (should be good for sure now)
please make for N5100 :crying:
thanks for this, Scott!
Can we use the 0301 Gapps?
Must use 4.3 gapps. Google them, they're out there.
thats what I thought..I have the PA gaaps. which are 4.3, so I will try them
thanks
EDIT: found the non pa gapps, so gonna use them..thanks again!
Thanks for the build.
One question: Is the source in your 10.2 branch current? I see last update 9 days ago and I'd like to fork it for my own try.
Gesendet von meinem GT-N5100 mit Tapatalk 4
Anyone having any luck with this rom? I downloaded it twice, clean install, etc... Everything force closes for me. Can't even type because the keyboard FC, the back button won't work, the top bar is all out of whack.
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
wase4711 said:
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
Click to expand...
Click to collapse
Yup, full wipe and PA 4.3 gaaps. Maybe I'll give it another go in a bit. I've got a good set up going as is, so even if I can't get it working it's not a huge deal.
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
wase4711 said:
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
Click to expand...
Click to collapse
Tried with no gapps and had no luck. Maybe just a bad download, although I did d/l twice.
edit - downloaded the rom one more time and installed the PA 4.3 gapps and all is well. Third time was the charm.
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
how long does it take / how difficult is it to compile these Roms? would love to help out development if I could figure out how to do it.
ddye said:
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
Please make it for N5120. :fingers-crossed:
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
No graphical glitches or black screens?
Click to expand...
Click to collapse
hermeticist said:
wase4711 said:
No graphical glitches or black screens?
Click to expand...
Click to collapse
havent noticed any yet
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
ddye said:
wase4711 said:
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
as long as you are rooted, you can install with no problems
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I installed 10.2 and 4.3 gapps and all seemed find until I ran titanium backup.
It couldn't get root access
try installing busybox, then reboot
Earlier, I have been compiling several ROMs for the galaxy tab (P7510/p4wifi) based on KitKat 4.4. After my experience with Omni was not that bad, I decided to move over to Nameless ROM, where I have become a core member of the team: http://nameless-rom.org/.
Changelog of 23-Mar-2014
-Many upstream updates from nameless & CM
-Updates to CustomLauncher (I have had no more FC's)
It features the Mackay kernel (it is a kernel named ICS_2014, because I worked on this kernel for stock ICS and CM9 as well). The zram code has been optimized (based on google advice for low-RAM devices) and is enabled by default. I also improved the OC code and changed voltages.
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Reboot system (there sometimes are bootloops if gapps is flashed directly on top of the ROM without first booting the ROM)
-Reboot recovery
-Install gapps (you should use a package specifically for KK4.4 and with the old-fashioned updater-script! - don't worry if you install an outdated gapps packages with the correct updater-script, as long as it is for KK4.4 the apps in the gapps package will be automatically updated -> only small gapps packages fit, e.g. banks core of pa 0-day gapps mini)
-Reboot system
-> some people report issues (e.g. bootloop or crashing gapps) if they flash ROM & gapps in a row after fully wiping the tablet. In that case, wipe again, flash ROM, boot the tab, reboot to recovery, and then gapps.
-> if coming from stock ROM, a factory reset may wipe you entire /data partition, so you loose you sdcard contents as well (I think this only happens with CWM, but I'm not sure)
-> in CWM "wipe system partition" can be found under mounts, and is called "format /system"
->If you get the message 'This package is for "p4" devices this is a "GT-P7500"' (or something likewise) update to a recent CWM or TWRP
Update installation (Nameless -> Nameless):
-Boot into recovery
-Install ROM
-Reboot system
You can download any gapps packages for kitkat that you like, but one that many have used successfullyis PA 0 day gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/nameless/
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/nameless/
Credits:
Nameless team members for the fun of developing with them
AAccount for his help along the way to get KK4.4 to compile for our aging device!
pershoot for the basis for the device trees & kernel base
Code:
Basis of Nameless code: https://github.com/nameless/
p4-specific code (check the nameless branch):
Common p4 device tree: https://github.com/kasperhettinga/android_device_samsung_p4-common
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4wifi
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4wifi
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4
Kernel tree: https://github.com/kasperhettinga/android_kernel_samsung_p4/
What does NOT work?
-There are graphical glitches. Although they mainly have been solved there seem to be some remaining issues with hwcomposer that may crash the tab.
-HD movies (in e.g. youtube) may stutter
Smoothness advice:
Go to performance settings:
-Overclock CPU (Do this at your own risk!)
-Keep governor on Interactive
Go to developer settings:
-Activate "Force GPU rendering"
-Active "Disble HW-overlays"
-Set background process limit to 4 processes
(if performance/developer options are not yet shown, go to settings>about and press build number 7 times)
-> Thanks to all forum members contributing to this list
-> Do it at your own risk!
-> Don't complain about limited battery life (ROW+interactive+1000MHz leads to better battery life for sure)
Some other tips:
-For improvement of sound quality, you can use Viper4Android
-For more volume only, SpeakerBoost is earier to use
-For netflix, head over here: http://forum.xda-developers.com/showpost.php?p=49208063&postcount=445
-To be able to use Flash player, use a browser that doesn't use the kitkat browser engine (e.g. firefox can be used). Download flash player from adobe website (thanks to AAccount for finding out!).
- If you can't see your internal SD on PC: Go to Settings -> Storage -> 3 dot menu -> tick MTP.
Great stuff...downloading now. Thanks a million and bless you. :thumbup::beer::thumbup:
Sent from my GT-P7510 using Tapatalk
Legend.
Sent from my GT-P7510 using Tapatalk
Great job kasper_h! I'll flash your rom asap!
EDIT: @kasper_h how can I offer you an italian coffe? Can you add a "donate link" in the OP?
Auzz adda v'daje!
When I press more under personalization it force closes...uninstalled messaging since it gives an error at bootup. So far everything is smooth.
Edit: Animation control force closes as well.
Sent from my GT-P7510 using Tapatalk
Thanks for all you've done Kasper. And also congrats on being in the Nameless team. I'll be flashing soon and hopefully it'll be as smooth as always.
Sent from my GT-P7500 using Tapatalk
Thanks for all the hard work, will try tonight
Kasper, will test the p4 version and post back.
Thank you so much!
Very appreciated. Will test the P4 version and send some feedback.
How many mb's is download? I finished with 144
Sent from my GT-P7510 using Tapatalk
lancem71 said:
How many mb's is download? I finished with 144
That seems to be right.
Click to expand...
Click to collapse
Yes, it is quite a bit smaller than Omni
@kasper_h If I came from your Omni Rom , should I do all the swipes mencioned in the first post? (I have a lot of app and stuff in my tab so...)
Vampiro2000 said:
@kasper_h If I came from your Omni Rom , should I do all the swipes mencioned in the first post? (I have a lot of app and stuff in my tab so...)
Click to expand...
Click to collapse
Do a titanium backup and restore the apps with data after full wipe and installation of this rom...
I fully wiped coming to nameless. Good moment to clean out my mess anyway
P4 link points to P4wifi ROM, just for the records...
kasper_h is my idol.
Thanks!
That is just awesome First thing I tried on the p4 of my girlfriend was bluetooth audio via speaker - and guess - yes, it works!
Haven`t tried anything more yet... Will do now! Now my girlfriend will be more happy, and everyone knows what this means
Kasper, the next beer is on me, donation already sent (confirmation no 6J252983C53731053)...
Keep up the good work!
Great new project!!! Kasper you're the best!
Van I flash this with the same TWRP version as Omni?
Sent from my GT-P7500 using Tapatalk
---------- Post added at 10:05 PM ---------- Previous post was at 09:56 PM ----------
BTW: what is the maximum size of gapps package that can be installed? I.e. can we only use the mini package?
Sent from my GT-P7500 using Tapatalk
[ROM] CyanogenMod 13.0 Android 6.0.1 Marshmallow [KLTESPR/KLTEDV] [UNOFFICIAL] [Nightlies]
Code:
*** Disclamer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
Introduction
-- These are UNOFFICIAL builds based of CM-13.0 for kltespr (CDMA) variant and KLTEDV . By NO means this is my ROM. 100% credits goes to
TeamDouche, and all other coders who contributed to CyanogenMod.
I noticed that alot of sprint users were anxious about not having any updates in awhile and figured I could do this for them. I
understand alot of people prefer pure cyanogenmod (like myself), especially given the support of some very nice kernels which often dont
work on other cyanogenmod based, but modified roms. Ive been doing my own nightlies for my klte varient and figured it wouldnt hurt to
help a few others out who arent getting the updates like fingerprints etc!!!!
Click to expand...
Click to collapse
Installation instructions
* Find your variant latest firmware and flash it (bootloader,radio baseband etc)
* Do not dirty flash (if you do, do not report issues)
* First and most important, ALWAYS MAKE A BACKUP!!!
* Reboot to recovery, immediately do a backup!
* Perform a factory reset (wiping data, cache, dalvik cache)
* Flash rom
* Flash GAPPS
* Reboot system
* Enjoy!
Click to expand...
Click to collapse
Downloads
See 2nd post!
Click to expand...
Click to collapse
FAQ
What Phone does this support?
At the moment these builds are only for the sprint version (cdma) of the samsung s5! I may add other variants of klte in the near future!
*Added KLTEDV
When will I get a new build?
I don't know and please don't ask for etas. As I stated I do this in my spare time but will do my best to keep up and at least make sure you guys are getting updated nightlies upon any of the more important, larger updates!
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible!
* Esa Laukkanen aka elelinux
* Cyanogen Inc & Team-Kang
* Garwynn XDA
* MrTrip
* Thescorpion420
* DevVorteX
* albinoman887
* ktonsez
*haggertk for all his hard work on the KLTEVZW variant, wouldn't be up without him!
Donations
Code:
I do this in between a busy life schedule in my free time! My girls paypal address is [email protected] (we share) and is also in my
xda profile. Any donations are very much appreciated but not necessary!
Downloads
ALL S5 VARIANTS VIA MY ANDROID FILE HOST ACCOUNT:
https://www.androidfilehost.com/?a=show&w=files&flid=53418
Click to expand...
Click to collapse
KLTESPR LATEST:
https://www.androidfilehost.com/?fid=4996500813288309125
Click to expand...
Click to collapse
KLTEDV LATEST:
https://www.androidfilehost.com/?fid=4996503000517181572
Click to expand...
Click to collapse
KLTEVZW:
https://www.androidfilehost.com/?fid=24459283995315487
Haggertk is taking over as maintainer so I wont host another vzw build as theirs no point in two of the same builds. Please see his thread for further development.
Click to expand...
Click to collapse
Gapps:
Open gapps nano package seems to be the most popular but any open gapps should work.
Click to expand...
Click to collapse
Bugs
Flashlight bug
???
Click to expand...
Click to collapse
*Reporting Bugs :
Please do so with this format : variant, firmware version, gapps used. Please don't report bugs on dirty flashes or non stock kernels.
Click to expand...
Click to collapse
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Drops77 said:
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Click to expand...
Click to collapse
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
omgbossis21 said:
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
Click to expand...
Click to collapse
got it thanks
I tried flashing the rom but I am unable to finish setup due to Google Play Store stopping. I saw in the other thread that you were having issues compiling newer builds, Would it be possible for you to do an older one (0325 specifically?)
FYI I dirty flashed over 0216 and it was working fine but I could not get the fingerprint reader to work. I tried a completely clean install (initially with the 1227 gapps from the other thread, OpenGApps stock, micro, nano, and pico) and ran into the Play Store has stopped issue. The initial CM setup gets just past "Enable WiFi" and it tries to check for app updates and will not go further.
My understanding as of now is that all the variant recent nightlies broke gapps and has now been fixed. There's a recent commit regarding sprint that I believe is breaking the build . I haven't had enough time to look into it but will continue to try sync & builds. As far as dirty flash w no fingerprints, I dirty flashed and mine didn't work either. I went to settings, apps and cleared cache on each app, rebooted and its ran fine since. The app cache doesn't get wiped in the clear cache & dalvik steps, its not stored on the cache partition. I tend to do it manually every dirty flash. I'm watching to see if the commit is flagged or reverted due to breaking other sprint builds.
Sent from my SM-G900T using Tapatalk
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Which app caches did you clear for it to start working? I set it up under lock screen. When I try to unlock I get one "Not Recognized!" error then it just fails to work (swipe just makes the lockscreen bounce) until I unlock and relock.
I am not super worried about the fingerprint reader so no matter either way. Thanks for everything! Feel free to let me know if you need any more information/testing.
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
There is a function in Titanium backup to clear cache for all user and system apps. I have not used it for any MM roms, but have had good luck with it in the past.
Thanks, I actually found that and tried it but it didn't help.
Well the latest sources build failed again. I'm not sure they host previous dated sources either. I'm just leaving a funeral now but I'll try to take a look at commits from the 26th build that was fine til the 28th I believe was the next one I tried that broke. I'll attempt the build again and review the errors. If I can find it I'll build WO that commit.
Sent from my SM-G900T using Tapatalk
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
omgbossis21 said:
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
Click to expand...
Click to collapse
Works perfectly with Open GApps micro, sent a small donation much appreciated for the Sprint builds. It's becoming tougher to find a vanilla build of CM13 for Sprint.
Transaction ID
0M056957MJ4576917
Works great with BaNkS Dynamic GApps
https://www.androidfilehost.com/?w=files&flid=41020
Thanks for continuing support for this device, I sure appreciate it.
Glad to hear its working well for everyone and thank you so much for the donations! I'll use any donations to go toward adding some more ram to my system! I use my PC as a media center and a virtual box in windows 10 with everything else running chews up some resources! I do not own the device so I can't really take the "maintainer" status. I will however ensure you updates from time to time just not a everyday thing. I'm going to look into a few other klte variants as well and may add them to this thread.
Sent from my SM-G900T using Tapatalk
Flashed the latest build with opengapps pico. Everything seems to be working fine except for a flashlight bug when toggled forces a restart and bootloop. Other than that, thank you dev! Your're the real deal.
I thought the flashlight issue had been fixed. It is getting harder to get an updated build, issue also the maintainers team,which they done great job,just not that active/up to date recently. Which sux..