Please help me... I cant install any custome rom... I have unlocked bootloader... I put original 2.1 root cwm and I flash nAa but every time i tap rebot system now.. Turn off-->nAa LOGO-->Recovery... Everytime... Then I put again on stock version... And I put nfls kernel and again... Any room I put he just restarting... I do full wipe everytime... PLEASE HELP... And yes I relock bootloader and again unlock... And nothing (((! Please help.
Sent from my E15i using xda app-developers app
mattesiri1 said:
Please help me... I cant install any custome rom... I have unlocked bootloader... I put original 2.1 root cwm and I flash nAa but every time i tap rebot system now.. Turn off-->nAa LOGO-->Recovery... Everytime... Then I put again on stock version... And I put nfls kernel and again... Any room I put he just restarting... I do full wipe everytime... PLEASE HELP... And yes I relock bootloader and again unlock... And nothing (((! Please help.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
do the clean install and the correct install
root
unlock BL
flash the kernel
don't forget to copy paste the update.zip or rom.zip in your sd card
from the recovery, do the factory reset
do full wipe dalvik cache and wipe battery stats
flash the ROM using the xrecovery kernel
DONE
mattesiri1 said:
Please help me... I cant install any custome rom... I have unlocked bootloader... I put original 2.1 root cwm and I flash nAa but every time i tap rebot system now.. Turn off-->nAa LOGO-->Recovery... Everytime... Then I put again on stock version... And I put nfls kernel and again... Any room I put he just restarting... I do full wipe everytime... PLEASE HELP... And yes I relock bootloader and again unlock... And nothing (((! Please help.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
which kernel version you flashed??? nAa .32 have idiotic proof, if the rom is not supported with .32 kernel it will auto boot into recovery....
try to do proper wipe and format system and then flash rom it will work
Related
Heya!
I've a question. THat if i unlock my boot loader, and flash a new kernel, will i need to reinstall my current rom, or its not important?
It is depending on the fact that your current rom is compatible with the kernel or not?
Gingerdx-->Alfs or ldx
minicm7.2-->naA kernel.
Hope this will help ...
Sent from my E15i using xda premium
Straboterous said:
Heya!
I've a question. THat if i unlock my boot loader, and flash a new kernel, will i need to reinstall my current rom, or its not important?
Click to expand...
Click to collapse
Just a suggestion: unlock bootloader after restoring phone with seus to base 2.1, so there will be far less (or none) problem through the procedure.
Sent from my heart using a brain )
One question, the recommended step if i want to flash custom kernel n rom is:
-flash kernel first,then rom
Or
-flash rom,then kernel..?
Sent from my E15 using xda premium
First flash kernel. I think you can do the opposite, but flashing kernel first is the best solution.
Sent from my heart using a brain )
i read that after unlocking bootloader, the xrecovery no longer works. so if i flash back my phone to 2.1, if i root and install xrecovery, will the xrecovery works..? or i must install CWM instead..?
and what i must do if i want to flash a ROM that need to be flash with xrecovery..?
Install the Dual-Mode recovery with x8Toolbox, that'll give you xRecovery AND CWM.
B.Jay said:
Install the Dual-Mode recovery with x8Toolbox, that'll give you xRecovery AND CWM.
Click to expand...
Click to collapse
ok..i already read the post.so...how do i use this..? i see alot of links but dont find any proper instructions. sorry.
can u teach me how..?
Thx for the usefull comments, and i have 1 more problem, the pcc shows that my phone is w8 (e16.) But it wrong because its e15... so i cant unlock my bootloader because the . Cmd file gives me error (cannot finde the path or aomething like that, and the flashing is aborted)
Sent from my X8
Straboterous said:
Thx for the usefull comments, and i have 1 more problem, the pcc shows that my phone is w8 (e16.) But it wrong because its e15... so i cant unlock my bootloader because the . Cmd file gives me error (cannot finde the path or aomething like that, and the flashing is aborted)
Sent from my X8
Click to expand...
Click to collapse
Használd a SEUS-t inkább. Ott kiválasztod, hogy X8-ad van, és ráflasheli az E15 firmware-jét, utána szerintem menni fog.
--
Use SEUS instead of PCC. There you can chose that you've got X8, then it will flash E15 firmware, then I think it will work.
Köszi szèpen! / thx
Sent from my X8
I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
lucasiumej said:
I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
Click to expand...
Click to collapse
did you try full wipe?
baseband number?
My baseband finish with 15
Sent from my E15i using XDA App
In the past, I installed many rom...but now every one chrash ( sorry for bad english)
Sent from my E15i using XDA App
i think you must going to first again ;
back up your data -> go back to stock with SEUS or flash offline,,root again,install CWM,then flash the custom rom.
lucasiumej said:
I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
Click to expand...
Click to collapse
diff roms needs to be Installed with diff recovery menu, and always do a fullwipe before and after installing,mayb u installed a rom which need to be installed with a diff recovery?
u're same as me ..i tried every rom but all the roms crashes or is too lag to even use ...i gave up on them and use stock rom =)
Reinstall to 2.1. Full-Wipe then Root,Install REcovery install any Rom u desire and after that full-wipe and done.
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Install rom via cwm before you must flash kernel then you must wipe cache and enjoy
Press thanks button if i help!
Sent from my E15i using XDA App
flash kernel go to cwm do full wipe wipe dalwik cache wipe cache partition instal rom and reeboot
and what i say roflmao
Sent from my E15i using XDA App
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
gagagio said:
the problem is that after i flash the kernel it doesnt boot to stock rom,the screen remains blank,what should i do??
Click to expand...
Click to collapse
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Lloir said:
here's a few choices
1: Read the forums
2: Sell your phone and buy a 3310
3: actually only 2 choices
and before you ask USE THE SEARCH BUTTON
Click to expand...
Click to collapse
well i read the forums but i didnt discover the same problem as me ...so again is the stock x8 rom not supposed to work after i flash the kenrel or am i doing something wrong?(ican get to cwm).MOreover,do i have to load the custom rom file first,then flash the kernel,then flash the loaded rom?
dude, flash nAa v10. after you flash it, the kernel logo will appear followed by the battery sign.
press power button, the phone will boot and the kernel logo will appear.
you will be sent do CWM Menu.
if you have a compatible ROM for nAa kernel, do a full wipe and reboot and see if the ROM boots successfully.
if you dont have a compatible ROM, do a full wipe, install CM 2.1.8 and then reboot.
U have to unlock bootloader first before flashing kernel,
this is the step (with stock kernel and rom installed and root) :
- unlock bootloader
- flash kernel
- enter cwm
- wipe data
- install custom rom
- wipe data again
- restart system
and ur good to go
gagagio said:
hello guys im new to the forum my problem is that i followed the method to flash a kernel(1st time) and i get the nAa's screen,i also have acess to cwm,then the logo dissapears and the phone stays blanc.(the only thing i can do is pull the battery)
Question: do i have to load the custom rom,then flash the kernel,then the loaded rom?
Click to expand...
Click to collapse
You cant load stock rom with a custom kernel. Just flash GingerDx Rom and you should be fine. Flash the kernel first using the flash tool, then flash the rom using CWM and then turn on the phone
ty very much guys( especially bahmonkeys)!I should have known that
gagagio said:
ty very much guys( especially bahmonkeys)!I should have known that
Click to expand...
Click to collapse
No problem im here to help!!!
Here is a newbie guide to unlock the bootloader
http://forum.xda-developers.com/showthread.php?t=1436924&page=2
After you unlocked BL you can flash the kernel with flashtool (with the latest one)
-Don't forget to copy you're rom to SDcard!
When the nAa logo appears hit the back button and you're in cmw menu.
full wipe->instal custom rom-> reboot your phone !
first flash your kernel and then install custom rom...
Hello, im helping a friend root he's phone.
He is stuck at the "Sony Ericson screen"
This is what we have done so far:
- install superuser/bussybox
- Custom recovery (CWM)
He then went into CWM and clicked:
- backup nandroid
- delete dalvik cache
- reset factory
- install zip from sdcard: Presto ... install it...... . .. . .
- Restart phone.
it gave me an error "bad restore can't restart" then It automaticly jumped to another submenu "no" "-yes -- restore CWN" underneath a warning: may not able to access the restore" I clicked yes and it restarted but never got further then booting
xologist said:
Hello, im helping a friend root he's phone.
He is stuck at the "Sony Ericson screen"
This is what we have done so far:
- install superuser/bussybox
- Custom recovery (CWM)
He then went into CWM and clicked:
- backup nandroid
- delete dalvik cache
- reset factory
- install zip from sdcard: Presto ... install it...... . .. . .
- Restart phone.
it gave me an error "bad restore can't restart" then It automaticly jumped to another submenu "no" "-yes -- restore CWN" underneath a warning: may not able to access the restore" I clicked yes and it restarted but never got further then booting
Click to expand...
Click to collapse
have u tried to use SEUS?
we fixed it.
I dont have this phone, so I didnt know you needed to have custom kernel and unlocked baseband.
How can I get the:
1. Latest baseband
2. Unlocked bootloader
to unlock the bootloader you have to check This
for latest baseband update the phone with Update Service
HashiKyu said:
to unlock the bootloader you have to check This
for latest baseband update the phone with Update Service
Click to expand...
Click to collapse
Thank you.
Where can I find this kernels
nAa AND ALFS KERNEL ?
or do they come with the ROM and automatically flash?
you can find in one of the Development Thread, you have to flash it first with flashtool then you can flash the ROM via CWM..
U means u didn't install X recovery.... If u install cwm its possible u having this problem... Cwm only work on stock rom.... Use flash tool and repair.. Install X recovery....i installed it too.. I got the same before, though it was on that Site.. This will work on stock rom
Sent from my E15i using Tapatalk 2
xologist said:
Thank you.
Where can I find this kernels
nAa AND ALFS KERNEL ?
or do they come with the ROM and automatically flash?
Click to expand...
Click to collapse
here for the nAa not ICS kernel
http://forum.xda-developers.com/showthread.php?t=1350484
and Alfs
http://forum.xda-developers.com/showthread.php?t=1340861
everything that u need, just search on android original development
bandarigoda123 said:
U means u didn't install X recovery.... If u install cwm its possible u having this problem... Cwm only work on stock rom.... Use flash tool and repair.. Install X recovery....i installed it too.. I got the same before, though it was on that Site.. This will work on stock rom
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
it's work on custom rom and kernel too,, i used it till now..
HashiKyu said:
it's work on custom rom and kernel too,, i used it till now..
Click to expand...
Click to collapse
I meant on Stock kernel
Hi Guys,
I have my x8 phone running on nAa's latest v6 kernel with ZenceFil ROM(GB 2.3.7) with ofcourse an un-locked bootloader. But now i want to move back to stock settings.
I had made a backup using xRecovery before installing these mods, so my question is, how to I restore that xRecovery backup along with the stock kernel which i already got from the unlock bootloader thread??
I tried flashing the stock kernel but then the phone just get's stuck in the boot logo page with Sony Ericsson logo, can't even open the recovery, which i guess is not included in the stock kernel file.
I tried installing xRecovery by copying its files to /system/bin but still i have CWM as recovery!
Please advise...
p.s. I saw this thread, but the solution provided there is not working for me as PCC is not helping, it juts say's no s/w found for your device. Also I don't want to lock the boot loader.
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
iks8 said:
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
Click to expand...
Click to collapse
I have downloaded the stock 2.1 rom but how do i flash a ROM using flash tool? I don't see that option..
Flash it like kernel.
Sent from my GT-P3110 using Tapatalk 4
NAA6 is using difrent system-data partition size. If you want to move to other kernel you need first boot into cwm and format data and system partitions, then flash other kernels.
You can also flash your phone with SEUS and you will have stock rom-kernel like you had when you bouth the phone (if your bootloader was unlocked SEUS will leave it unlocked).
Stock rom and kernel you can flash using Flash Tool, just move the ftf file (for exemple 2.1.1.C.0.0.ftf) move this to the FIRMWARE flashtool' folder. Open flash tool and click on the "lightning" icon, (on old version click on flash) and select flash mode. Turn off the phone and flash it like a normal kernel.
But the stock rom that i downloaded has no ftf file! It's a normal backup have 4 .img files.. how do i flash that?
Sent from my Canvas 2 using XDA Developers App
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
AndroidNotMaster said:
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
Click to expand...
Click to collapse
Thats way i do it. Nice and easy way
Sent from my X8 using xda premium
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
ibshar said:
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Search here
http://www.google.co.in
Sent from my iPhone :silly: don't flame me
wanna hang out with us? click here
stock kernal for canvas 2
I have been using canvas 2 from the past 3 months and I have flashed a custom kernel in it and now I get a error-
"Can't connect to camera" whenever I try to run it
Please help me by giving sugetions to fix it or
Please please please give me a link to the stock kernal
I am using thunder zap for now and its horrible
Please help me its urgent.:crying:
This is not the correct thread to post ur query, please move to the Micromax A110 thread and post there.. You also need to specify which rom you are using!
Sent from my Canvas 2 using XDA Premium 4 app