Database Develop

Who says X8‘s CPU is snapdragon8250？

Why a lot of introduction says X8 use snapdragon QSD8250 with 600MHZ？
BULL ****！！

What? The CPU is 600 MHz.

I'm under the impression the X8 is running an Qualcomm MSM7227 @ 600 mhz with AMD Z430 GPU, quite a good performer @ its price range imo

I don't know why do u think cpu in X8 is Snapdragon it's Qualcomm 7227

manhchien1311 said:
it's Qualcomm 7227
Click to expand...
Click to collapse
MSM7227 belongs to the Shapdragon S1 generation

Overclocking the ULP in the Tegra 2 SoC?

Just looking on Wiki on the Tegra 2 section and noticed that there's 4 models of the Tegra 2, with the OX2 running lowest clocked version.
Our ULP GPU is clocked at 300Mhz but other versions in the same family have theres at 400Mhz.
Is there a kernal that allows GPU overclocking? Would be nice to get a 1.2-1.4Ghz CPU with a 400Mhz GPU..

old VorkKernel could do that... but it broke the camera

HerrKuk said:
old VorkKernel could do that... but it broke the camera
Click to expand...
Click to collapse
Anything that would do the trick on a stock rom?

almighty15 said:
Anything that would do the trick on a stock rom?
Click to expand...
Click to collapse
I would definately be interested in this myself as I already had a thread going asking about it. A total guess here, but I think the problem 'may' be in the voltage required to get it to 400mhz, rather than upping the mhz itself.
As I say I might be wrong! The Aandtech review of the O2X show's that it does in deed have 400Mhz memory, but only running @ 300Mhz. That just smacks of potential to me

Scougar said:
I would definately be interested in this myself as I already had a thread going asking about it. A total guess here, but I think the problem 'may' be in the voltage required to get it to 400mhz, rather than upping the mhz itself.
As I say I might be wrong! The Aandtech review of the O2X show's that it does in deed have 400Mhz memory, but only running @ 300Mhz. That just smacks of potential to me
Click to expand...
Click to collapse
On my old Acer Liquid Metal the last kernal I had supported overclockg on the adreno 205 GPU and let's just say that coupled with the new drivers that Qualcomm released and an overclock it was killing the PowerVR SGX540 in a lot of benchmark.

That must have been one hell of an overclock to achieve that!

Scougar said:
That must have been one hell of an overclock to achieve that!
Click to expand...
Click to collapse
Nah, the drivers alone added a 1.5-2x the performance gain!

almighty15 said:
Anything that would do the trick on a stock rom?
Click to expand...
Click to collapse
I dont think so
Ask your kernel dev if he can help you

on horsepower 2x we can set the gpu frequency up to 350Mhz, i think it works...

may b r may b not
almighty15 said:
Anything that would do the trick on a stock rom?
Click to expand...
Click to collapse
OldVork kernal works on atrix 4g.. ? :s both have same SOC..

[Question] Moto G 2014 Processor Model

So, i got curious and downloaded the "CPU z" application to have a look at my phones specs in detail. I found that my processor was the "4x ARM Cortex A7 @1.19Ghz". however the advertised processor is the "1.20GHz Qualcomm Snapdragon 400" now, is this just a pre-manufacturing model name and I'm just being stupid or is something fishy going on here?
Also i find it odd that the actual processor in my device is clocked at 1.19 when i in fact was under the idea that it's a 1.20 clock speed. I'm sure it wouldn't make that much difference but still seem odd?
could someone put my mind at rest and tell me that I'm just being an amateur and to go back into my android noobie cave or can someone confirm that in fact something fishy is going down.
thanks!

https://www.qualcomm.com/products/snapdragon/processors/400
Snapdragon 400 processor specs
CPU
Up to 1.7 GHz dual-core Krait 300 CPU or up to 1.6GHz quad-core ARM® Cortex™ A7 CPU
Click to expand...
Click to collapse
And don't worry about the clock speed.
I hope this answers your question.

Abruzini said:
https://www.qualcomm.com/products/snapdragon/processors/400
And don't worry about the clock speed.
I hope this answers your question.
Click to expand...
Click to collapse
Thanks ^_^

[Q] Mi Note Pro Snapdragon 810 version/revision?

Sorry if this has been asked before, did a couple searches and found nothing related so here it goes: as title says is there a way to check the Snapdragon version/revision of this phone? I mean factory wise, no third party tools. I'm a bit confused because this phone launched under the statement of the Snapdragon 810 v2 revision 2.1 and the thermal heats / performance improvements. But recently I've seen some Sony/HTC phones that were released under the "old" version (specially the M9) having a firmware update that brought the performance to the same scores in all benchmarks to the rev 2.1 supposedly the Mi Note Pro has so I'm a bit confused with all of the revisions, is this one a different revision? Is there a way to check it out, like in recovery mode or through adb/fastboot? If so could you post and share your results / findings? Thanks

The snapdragoon 810 rev. 2.1 have a overclocked GPU , "normal" 810 chip have a gpu clock set to 600 ; 2.1 versions have a 630 clock in the gpu, so download cpuz and check it.

Please confirm the processor speeds.

The official Samsung site and many reviews state the Note 5 CPU is four cores at 2.1 GHz and four at 1.5 GHz. I have also found a few sites that ONLY list it at 1.5Ghz, including the specs at the top of this forum.
Can anyone confirm?

Do you have the phone? ...if you have it, Install an app like cpu Z from play store and check for yourself
ścribbled from my Note 5

I don't have the phone yet. I'm assuming the XDA stat is wrong, but wanted confirmation.

yes it has 4 A57 cores at 2.1 Ghz and 4 A53 cores at 1.5 Ghz

Thank you!