3g problem - Xperia Z Q&A, Help & Troubleshooting

I got this weird problem problem with 3G on Xperia Z. On Wi-Fi everything works fine, but ond 3G, only Facebook aplication works, all other apps can't connect to internet. When i share my connection via hotspot, everything loads perfect on other device, so I eliminated sim/operator problem.
Problems started when I upgraded software to 10.5.A.0.230 version, so I tried reset to factory settings but didn't helped, and software version remains the same. I tried all common solutions, like APN settings and similar things, but nothing helped.

cartoon200 said:
I got this weird problem problem with 3G on Xperia Z. On Wi-Fi everything works fine, but ond 3G, only Facebook aplication works, all other apps can't connect to internet. When i share my connection via hotspot, everything loads perfect on other device, so I eliminated sim/operator problem.
Problems started when I upgraded software to 10.5.A.0.230 version, so I tried reset to factory settings but didn't helped, and software version remains the same. I tried all common solutions, like APN settings and similar things, but nothing helped.
Click to expand...
Click to collapse
why dont you manually reflash the ftf from a different country?

androidtweaker1 said:
why dont you manually reflash the ftf from a different country?
Click to expand...
Click to collapse
Good tutorial would be helpful

cartoon200 said:
Good tutorial would be helpful
Click to expand...
Click to collapse
First you need flashtool go here and get it www.flashtool.net/download.php
Backup your data
Then get the ftf file here http://forum.xda-developers.com/xperia-z/general/stock-xperia-z-c6603-10-5-0-230-central-t2759584
Install flashtool
Put the downloaded ftf in frimware folder "you can find it in the place that you installed flashtool
Open flashtool
Click the icon and select flashmode
Select the ftf
Enable usb debugging in developer option in your phone
Hold the volume down button and connect you phone when the flashtool ask you
Then you got the 4.4.2
Hit thanks button if worked!

androidfreak70 said:
First you need flashtool go here and get it www.flashtool.net/download.php
Backup your data
Then get the ftf file here http://forum.xda-developers.com/xperia-z/general/stock-xperia-z-c6603-10-5-0-230-central-t2759584
Install flashtool
Put the downloaded ftf in frimware folder "you can find it in the place that you installed flashtool
Open flashtool
Click the icon and select flashmode
Select the ftf
Enable usb debugging in developer option in your phone
Hold the volume up button and connect you phone when the flashtool ask you
Then you got the 4.4.2
Hit thanks button if worked!
Click to expand...
Click to collapse
No luck... Everything good until connecting phone... volume button up, blue light on phone turnes on, flasher detects 'Device connected in fastboot mode', but this screen stays on:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did it... Volume - instead of volume +... flashing successful, problem with 3G not solved

cartoon200 said:
No luck... Everything good until connecting phone... volume button up, blue light on phone turnes on, flasher detects 'Device connected in fastboot mode', but this screen stays on:
Click to expand...
Click to collapse
Bro blue light means the phone is in "Fastboot mode"
turn of phone. hold volume down key and connect USB it will put your phone in "flashmode" after that flashing will start in flashtool
---------- Post added at 10:05 PM ---------- Previous post was at 09:46 PM ----------
cartoon200 said:
Did it... Volume - instead of volume +... flashing successful, problem with 3G not solved
Click to expand...
Click to collapse
Were u on 4.3 before updating?

cartoon200 said:
No luck... Everything good until connecting phone... volume button up, blue light on phone turnes on, flasher detects 'Device connected in fastboot mode', but this screen stays on:
Click to expand...
Click to collapse
Bro... HOLD THE VOLUME DOWN BUTTON
Sorry about the mistake that i told you hold the volume UP button

cartoon200 said:
Did it... Volume - instead of volume +... flashing successful, problem with 3G not solved
Click to expand...
Click to collapse
androidtweaker1 said:
Bro blue light means the phone is in "Fastboot mode"
turn of phone. hold volume down key and connect USB it will put your phone in "flashmode" after that flashing will start in flashtool
---------- Post added at 10:05 PM ---------- Previous post was at 09:46 PM ----------
Were u on 4.3 before updating?
Click to expand...
Click to collapse
Yes, I was.

cartoon200 said:
Yes, I was.
Click to expand...
Click to collapse
Manually flash 4.3 ftf
check whether 3g works
after that manually flash 4.4.3 ftf

androidtweaker1 said:
Manually flash 4.3 ftf
check whether 3g works
after that manually flash 4.4.3 ftf
Click to expand...
Click to collapse
Can you give me link for dwnl?

cartoon200 said:
Can you give me link for dwnl?
Click to expand...
Click to collapse
which country u live?

androidtweaker1 said:
which country u live?
Click to expand...
Click to collapse
Bosnia

cartoon200 said:
Bosnia
Click to expand...
Click to collapse
Is it C6602 or 6603

That numbers really don't mean much to me... If somebody have some kind of solution, I need links and tutorials to try it

cartoon200 said:
That numbers really don't mean much to me... If somebody have some kind of solution, I need links and tutorials to try it
Click to expand...
Click to collapse
Roms are model specific you can cross flash but flashing a model specific rom would be better

Related

[Q] Xperia Z cannot get in FLASH MODE

I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
I think you have to press the volume down button and then plug it in.
hope i helped.
Mufrad said:
I think you have to press the volume down button and then plug it in.
hope i helped.
Click to expand...
Click to collapse
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
keroro84 said:
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
Click to expand...
Click to collapse
I only get an unknown USB device and i don't seem to have any correct driver.
unable to access flashmode
nurps said:
I only get an unknown USB device and i don't seem to have any correct driver.
Click to expand...
Click to collapse
i can confirm that, got the same issue - i installed at least cwm for cm10.1, want to go back to stock rom - need another kernel - only can be installed by fastboot but i can not access the mode - volume up or down while plugging in usb cable doesn't work, no driver change
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
same here, trying to to update using Sony PC Companion and was told in the instructions, under step 5, to press and hold volume don key on the phone while plugging the USB cable into your phone, tried several times, even restarted phone, not happening.. HELP!1111111111
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
No change for me, works fine on another PC. But i want to be able to update that phone in my own home.
Thaevil0ne said:
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
Click to expand...
Click to collapse
hi, no one of both options works, also tried hard power off (3 x vibrations and then plugin while holding down/up)
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Sauriann said:
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Click to expand...
Click to collapse
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
XperienceD said:
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I got the same issue, cant get to fastboot mode, This issue maybe related to the registry, but i dont know how to deal with it.
Sent from my Nexus 4 using xda app-developers app
chungjimmybb said:
This issue maybe related to the registry, but i dont know how to deal with it.
Click to expand...
Click to collapse
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
I tried via Sony PC Companion 2.1 and I get this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use these rom on Xperia Z:
Sauriann said:
I tried via Sony PC Companion 2.1 and I get this message:
Click to expand...
Click to collapse
So use the flashtool then, and read the stickys too.
I tried flashtool at least 20 times. Simply can not start the installation system (vol. down button + USB cable at the same time does not work!). SO, I can not put phone in flashmode enymore. Flashtool see phone in this mode for a few seconds and then stuck. On the phone i have green led for a sec, then nothing...
So any method that requires phone in flashmode is unusable.
Before this i use it (flashtool) several time normaly.
Sauriann said:
So any method that requires phone in flashmode is unusable.
Click to expand...
Click to collapse
Then you need to clean your computer of all things Sony, remove drivers etc and start over. http://developer.sonymobile.com/services/flash-tool/
XperienceD said:
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
Click to expand...
Click to collapse
i got the same issue too and just tried in friend's computer with no luck. i am sure to stick with the flashtool guide step by step, but can't do fastboot mode yet.
Ok this (http://developer.sonymobile.com/services/flash-tool/) work, and this "flashtool" is Emma fom Sony Mobile.
Tnx for help.
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
Wat kind of version do you use? The regular one or beta one?
Sent from my C6603 using xda app-developers app

[Q] [Help] Hard Bricked Xperia PC Recognizes as "qhsusb_dload"

Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
I also had that prob before after my phone get into the water. What i mean is water damage. What i did is leave the phone around 1 to 2 days.then charge it.miracles happen,my phone suddenly boot up.
Sent from my C6603 using xda app-developers app
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
x102x96x said:
install usb drivers manually
if u r on win8 u should know to disable driver signature and etc (all tutorials are available)
then to find solution calm down, and check what did u do exactly step by step
not deleting another rom (i m opinion) cannot cause hard-brick cause almost of custom recoveries wipe everything themselves before start to flash new rom...
:good:
Click to expand...
Click to collapse
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
mcyorian said:
im not sure its so simply as connect the phone to charge, i mean, the phone was flashed by a rom designed for another phone!...
SONY XPERIA Z flashed by accident with a customn miui rom for GALAXY S3, as a result the phone is dead, no minimal responses, no vibs, or led, flashtool doesn works, and the only thing is the phone is seen bypc as "qhsusb_dload" unknown decvice.
About manually installed drivers... whats drives? Sorry for my english and thanks a lot for tour help!
Click to expand...
Click to collapse
i don know what device is for xperia
but sth called Box is for galaxies that can reinstall rom from initial binaries... so it can help to recover almost dead phone
and some special tools again for galaxies, like g-tag or ...
i know them cause i hard-bricked my s3
But i didn't have any access to these tools... so my my s3 pasted away...
for ur situation; search more for these kindda tools and take it asap to pro. service or professional hardware engineer
good luck
:good:
Do you have ADB set up? See if ADB recognizes fastboot mode. Then maybe you can fastboot flash. But as far as I can tell with my limited knowledge the bootloader seems to be corrupted, which is probly irrepairable. Maybe you can get some of the real devs to help you if you ask nicely enough, I'm just a lurker...
mcyorian said:
Is there any solution?
DUMB ERROR HERE!!!!
I was flashing a rom but i make a big mistake and install another rom instead,( i use my phone as a usb sometimes! i forget to delete this rom from my sd card) :crying: MIUI for GALAXY S3 or something! Battery was over 86%
PROBLEMS:
1- No Leds (NO is NO!)
2- Phone doesnt vibrate ( not even hard keys combos, not anyones! )
3- Conecting to PC and PC doesn recognize Phone Sound alert for usb not dirvers
4- device manager shows my phone as "qhsusb_dload" with yellow alert for no drivers.
5- Flashtool doesnt see my phone on eny mode Fastboot or Flashtool
Any help?
I hope find a method to trick the driver an tell my pc is a XPERIA Z....
Any solutions?
THANX IN ADVANCE GUYS!
Click to expand...
Click to collapse
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
robdevil said:
qhsusb_dload= qualcomm driver needed(but it wont change any thing). Only boot repair can solve this problem nothing else.
Ask riff box users about help.
Click to expand...
Click to collapse
Thanks!!! where can i find these people ? (riff Box Users?)
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
shoey63 said:
@[NUT] has a disaster recovery thread. He may be able to work some magic for you :fingerscrossed:
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
We where actually already working on a possible solution, he found my thread on his own
Help Needed
mcyorian said:
Thanks!!! where can i find these people ? (riff Box Users?)
Click to expand...
Click to collapse
have you found any solution because I am experiencing the same issue
Same Problem
Hi friends I have the Same problem With my xparia lt26w (acro s)
I think when the device has no kernel same thing would happen.
As I know Samsung users Made a program that save phones from Hard brick
Is there any way to write the same program for xperia devices???
Or If any boady knows a box that support Sony devices boot Repair???
I try riff 2014 box but Nothing happend and Not supported.
Any help Frome Developers plz???
I have the same problem, I try to install another rom on SXZ. I try QSTP and HDDrawCopy, but I need the files of bootloader for fix this issue, but I don't know where to find it.
This is my post http://forum.xda-developers.com/showthread.php?t=2639444
UPDATE
has been long time since my XZ was bricked, thanx to XDA community for help (specially @[NUT] ) but my phone was pretty dead ...
i left my phone alone by a month and go to vacations, now im back and put my phone to wall charger.... AND ****!
i got a red light!!!!!
i know there is no hope but, the phone was very unresponsive!!! and now i have a temporal red light,
the red led, turn on and was on by 5 minutes and then off, but when i press power button the led flashes acouple of times and off,
i put the phone on a pc, and the les turns on, but i still cant get flashmode work... i was triying on pc even with custom drivers by @[NUT] but no luck
the phone still doesnt get flashmode on. the phone on pc keep showing it as a qualcom **** device or somethig so.
Now, im a mac user, and ohhhh surprise! on mac the device get 2 different status...
1 - when connect to a mac and press the power button it says :
Sony Ericcsson Mobile Communications AB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- When try to get flash mode on it shows:
0x05c6 (Qualcom, Inc)
Unfortunately my flashtool on mac start to fail and i cant run it .. ( force close ?) ill try to reinstall the app
if you know how to help me on this new plataform or on a pc THNX guys!!!
if you have suggestions or tricks to try this XZ back to life it would be very appreciate!
Sorry for my english ....and thanx guys!
Try to contact @the_laser, who made the Z1 hardbrick recovery software: http://forum.xda-developers.com/showthread.php?t=2646405
As long as it's only your bootloader which has been screwed up, you will have every chance he might be able to fix it.

Flashtool not working

when i try to flash FTF using flashtool it wants me to enter flashmode. When i enter flashmode the Flashtool doesn't recognize the phone.
username249 said:
when i try to flash FTF using flashtool wants me to enter flashmode. When i enter flashmode the Flashtool doesn't recognize the phone.
Click to expand...
Click to collapse
install the driver for Xperia Z & import the device before flashing.
Ben Ling said:
install the driver for Xperia Z & import the device before flashing.
Click to expand...
Click to collapse
I have the drivers installed. What do you mean by import the device.
Do I need the original use cable because my usb cable isn't working anymore now I'm using Samsung usb cable
username249 said:
I have the drivers installed. What do you mean by import the device.
Do I need the original use cable because my usb cable isn't working anymore now I'm using Samsung usb cable
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no you don't need original cable
but are you sure that you installed the flashmode driver in Flashtool>drivers folder ?
Ben Ling said:
no you don't need original cable
but are you sure that you installed the flashmode driver in Flashtool>drivers folder ?
Click to expand...
Click to collapse
Yes,I tried to install it 3 times
I'll try to import the phone as soon as I turn on my laptop
Edit: it was working when my bootloader was locked.
Ben Ling said:
install the driver for Xperia Z & import the device before flashing.
Click to expand...
Click to collapse
importing device didn't fix it
I think it is a hardware issue I tried to flash it on another pc and the same problem occurred
I have found the problem but I can't fix it
The problem is: my phone freezes when i enter flashmode. I have to make a hard reset to make it work again.
username249 said:
I have found the problem but I can't fix it
The problem is: my phone freezes when i enter flashmode. I have to make a hard rest to make it work again.
Click to expand...
Click to collapse
What is "hard rest" mean? How to do it.?
My problem is on the flashmode.
When I plug the phone while hold down the Vol -, The Green LED just light about 1sec then turn off.
and flashtool inform error
I can not flash new firmware via flashtool
Could you teach me how to fix this problem
Thanks
What type of computer do you have? You aren't using Windows 8 are you? Because if you are it is a little more complicated.
---------- Post added at 11:44 AM ---------- Previous post was at 11:31 AM ----------
What type of computer are you on? You aren't using Windows 8 are you? Because then it is a little harder to install and enable drivers that aren't recongnised.
Hassan_AUS said:
What type of computer do you have? You aren't using Windows 8 are you? Because if you are it is a little more complicated.
---------- Post added at 11:44 AM ---------- Previous post was at 11:31 AM ----------
What type of computer are you on? You aren't using Windows 8 are you? Because then it is a little harder to install and enable drivers that aren't recongnised.
Click to expand...
Click to collapse
I'm using a Dell laptop
Windows 7 64bit
Next time, wait for flashtool to say you should connect your device on flashmode.
If you connect it before flashtool asks it, it will fail.
So choose the ftf to flash, wait for flashtool to ask you to connect your phone in flashmode, now connect your phone.
Sent from my C6603 using XDA Premium 4 mobile app
crazymister said:
Next time, wait for flashtool to say you should connect your device on flashmode.
If you connect it before flashtool asks it, it will fail.
So choose the ftf to flash, wait for flashtool to ask you to connect your phone in flashmode, now connect your phone.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I always wait for flashtool to ask me to connect the phone in flashmode
Mhmm, you are pressing the volume down button as you connect the USB cord right?
Hassan_AUS said:
Mhmm, you are pressing the volume down button as you connect the USB cord right?
Click to expand...
Click to collapse
Yes i press volume down as i connect to usb cable

xperia SP dead! please help

1- i have a xperia SP and i connect to charger!
2- after 1 minutes phone power off automatic & showing a picture like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i want to flash a stock rom with flashtools, but flash tools cant flash it!
flashtools only know phone in fastboot mode correctly!
but in flashmode there is a unknow problem!
i can't boot device & can't flash it! flashtools & other ways can't flash it! i don't know for what!
but flashtools can't connect correctly to device!
i test it in other PC but no any change happend!
i know there is a problem with flashmode, but i don't know what is it!
driver install correctly & i know what i doing
so please don't say basic work
thanks for any help
Try Sony Update Service. Download from their website, install and try
i try it but even don't know phone when connect it in flashmode!
Start up Sony Update Service, select your phone and follow the stepps. At one point you'll see this pic:
Remove the backcover. If you look closely you'll see a tiny yellow button.. Use a pen or paperclip to push and hold it for a few second to turn it off (will take some time and patience because our phone has its own will xD and will boot up again) Plug in cable into phone and into pc and press volume down untill you see a green light. This indicates flashmode.
If it goes well the programm should start doing its download and flash work
the green light is showing but Sony Update Service don't start flashing & it remaining in your screenshot stat!
Got a picture for me?
On second thought:
You got flashtool installed? (and thus the drivers located in C:\Flashtool\drivers?)
picture is like post 4#
yes i install it & drivers
I mean of your phone? I mean if the phone is connected into flashmode it should work.. So I dont understand why it wont work...
@amir_n71, did you download a firmware to use with Flashtool?
yes i download
And tried ofcourse...
Prior issue now is we need to get the phone into working flashmode so that Flashtool or Sony Update Center can reflash the Firmware...
Just to be sure, did you:
a. Check if your battery had enough juice left for flashing and, if not, tried to recharge it,
b. Try to enter recovery by powering on the phone while holding Volume Down button (if you had a recovery previously installed),
c. Use a Windows computer,
d. Exit and kill any running ADB processes (Sony Update Service and PC Companion included) before trying to flash with Flasthool?
and then:
1. Power off the phone (using side power button OR by pressing the Off button under the battery cover),
2. Download latest Flashtool,
3. Install FT AND flashmode and fastboot drivers,
4. Download a suitable official firmware in a form of a .FTF file (full firmware, not just a kernel),
5. Copy that firmware to the "firmwares" folder in FT's install directory,
6. Start FT, click on a "lightning" icon, wait for the proram to finish its thing, select the firmware you downloaded, click on "Flash", connect the phone to a USB port while powered off and holding Volume Down button until FT started the flashing process?
Is that a xperia sp?
Sent from my C5303 using XDA Free mobile app
No a Xperia with same issue as op he used it as picture to show his issue
Sent because I pressed enter
yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information
amir_n71 said:
yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information
Click to expand...
Click to collapse
Just disconnect and reconnect. I got that a lot with my Xperia ray
Verstuurd vanaf mijn C5303 met Tapatalk
i tried but no answering!
ADB drivers: None
Fastboot Drivers: None
I suggest you reinstall Flashtool. It misses some drivers. (perhaps the cause?)
And also update Flashtool... See their thread and website
i installed latest version from flashtools website!
Now install fastboot and flashmode drivers that came with Flashtool. Open "drivers" folder, run that single EXE file, select fastboot and flashmode from the list and install them.
And be careful to run the correct version of Flashtool on your system! Run "flashtool64.exe" on a 64bit Windows, and "flashtool.exe" if you have a 32bit Windows OS.

Hard Bricked ALE-l21

So last night I created a flashable zip from the UPDATE.APP with the Huawei update extractor tool. I flashed it with TWRP it flashed everything but at the end it said it was unable to mount /system. I rebooted but nothing happened. Now when I try to power on the phone the notification led blinks one time red two times green and nothing appears on screen. I can't enter recovery, fastboot or anything else.
Anyone have any idea what can i do?
Looks Bad ?
Gesendet von meinem hi6210sft mit Tapatalk
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
Works ADB?
Maybe u have already tried but can you manually start fastboot mode? Power button + Volume down + usb cable?
If it enters fastboot mode, flash stock recovery, BOOT.IMG, CUST.IMG, and SYSTEM.IMG.
I've never heard of a flashable zip that actually worked for P8 Lite
Does your pc detect the phone when you connect it to usb? You can try another usb port and look into device manager.
If it detects anything, then try
Code:
adb devices
to see if there's anything. If adb finds a device
Code:
adb reboot-bootloader
to get into fastboot mode and then you can flash boot.img, cust.img, recovery.img and system.img.
You can also try to boot into fastboot mode directly (it may work, even if you don't see anything on the screen) and try
Code:
fastboot devices
if it was detected. If it was, you can flash the img's.
If nothing of the above works, send the phone into warranty and act dumb ("it was off when i woke up and it doesn't turn on anymore even if i charge it for hours" for example, don't mention the bootloader, flashing stuff, twrp, etc.); the chances are that they will replace your motherboard or give you a new phone.
Good luck.
I will probably send the phone in warranty.
Hello,
I have the same problem, and i also want to send it back as a case of warranty, does it work for you? Did you get a new Phone, or did they fix it?
Wish you a nice day,
thanks for your answer!
I'm having the same problem...
Weird red LED patterns...reboots, doesnt turn off (consequence, always very low battery), only huawei logo for eternity....
Usb on or off on the phone with the VOL DOWN + POWER, doesnt go to fastboot...
Anything works...
Sugestions? Thank you!
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
spirto82 said:
As @dennyn said, try via pc. If your pc can recognize your phone, you can play with adb and start all over again.
Click to expand...
Click to collapse
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
Click to expand...
Click to collapse
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
spirto82 said:
In order for the phone to be recognized from the pc, the phone must be turned on. Try turning it on (with the notifications red or any color), connect it to pc and then use adb.
Try charging it before anything else, since you cannot tell how much energy is stored in the battery.
When you connect the phone to your pc, do you get any pop up message, that new hardware has been found?
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
Im on B052 ROM working good, I guess im good from now
Thank you
I also got the same problem don't know what tried fastboot multiple times
if u still have the problem,
just disconnect the battery " not easy work :3 " .. reconnect it
HOLALALA.. your phone works now ..
you can see a post for me in this forum and some guy helped me ..
i,m also stuck at same position..
when i connect and wait , after led's stop blink, my device connected with PC
with unknown drivers written chinese language.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help please..
Sharlimar said:
Thank you for the reply
I've tested in two PC's and it doesn't detect...
I think this phone is bricked for good...
Ive tryed almost everything i've see on foruns and stuff
Dunno what to do
EDIT: OMG I just tried again to enter the fastboot and it went through!!!
Gonna try to unbrick by the http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 tutorial
Click to expand...
Click to collapse
Hey dude! I have the same issue from same mistake now, how did you enter fastboot? What buttons did you use, did you have your battery unplugged? I've been trying everything for hours now but no luck...
Cheers, hope you see this post!

Categories

Resources