Database Develop

I9000 rom on i9001

Moin
I Have a easy Question....
Is it possible to flash an i9000 rom on the i9001
because i want flash darknight 2.1 rom with android 4.0.4
thank a lot for answers
Lump800

Do not do such things! ! ! Your phone may already be obsolete. I9000 and i9001 is a very different phones! ! !
Wysłane z mojego GT-I9001

Thank you kept me in front of a large error.
I had almost a door-stopper beautiful.
translated by google translator
sorry for that my english in not the best

Noo nooo and noooooooo. this is the fastest ticket to a broken phone

don't even think about it

is it possible to flash i9001 file to i9001 after i9000 firmware
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot

darkeye said:
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
Click to expand...
Click to collapse
should be possible, you need to find the oldest possible stock rom and try flashing it with AiresVE.ops , MultiLoader Odin v.4.43

This happened to me, someone flashed cm for i9000 on i9001 and it worked for a while but it progressively started crashing, i took that phone and tried flashing stock but never could get pass setup connection in odin 4.43, tried all the variations (driver reinstall, new cable, remove battery, other PC etc) and in a hail marry attempt i managed to flash i9000 stock witch odin 1.83. Phone now works, enters download and recovery mode, but i still cant get past same error in odin 4.43 or flash custom recovery i any way (verification error from update method, adb flash just doesnt stick). ROM manager sees some custom recoveries but i cant enter them, my guess is because of different pit file from i9000.
Havent tried flashing i9001 rom with odin 1.83 because i cant use ariesve.obs from 4.43, i managed to connect to phone with heimdall and download pit, so that kind of connection works. My guess is that if i could somehow create pit file for this phone that works with heimdal i could flash proper stock rom, so im here to ask is it possible and how would i do it ?

[Q] Galaxy S Plus GT-I9001 ROM I9001XXKQ7 Please Heeeelllp

Hi, i've used this rom via Cwm like this post was written, and i flash ok, but when i'm restarting the phone it always reboot. Can u tell me what ive did wrong?
Now i only can conect to pc via sdcard i put the basic root signed.zip and it didnt recognize.
Can annyone help me? i can copy the link of you tube here to help.
Thankss

Please be a bit more detailed the next time you describe a problem. You should at least give some exact information about what rom you have flashed and how you did it...
I suggest you to read the following and then do a clean flash via odin when you have gained some basic knowledge:
[9001][GUIDE][NOOBFRIENDLY]Starter-Guide
[GUIDE] [Flashing ROMs] Step-by-step

Hi sorry for my late answer. I read all posts for noobs and ive discovered that my phone was boot looping. I flashed the original firmware with odin. Then the basic recovery mod all with odin. After that ive rooted the phone and flashed the New twrp touch recovery mod. Then I flashed a kernel compatible with 4.4.2. And the New rom. O only Can flash the mokee 4.42 and not others I dont know why. But phone is runnig well. Ive even installed the Galaxy w drivers compatible with our phone.
Sent from my GT-I9001 using xda app-developers app

[Q] Update Error on N7000 XXLSA

HI..
I really need some advices..
I just flash a rom for my SGNote N7000 with leaked Jelly Bean XXLSA from here
I flashed this ROM succeeded and have no problems with it.
The problem came when I got Update notification and it automatically downloaded the update. I gave it a try and install it. But now my SGNote seem stuck on update screen after reboot.
Please, I really need advices what am I dealing with this problem and how to fix this.
All kind help are very much appreciated.
Thanks

try re-flashing Eybee's ROM again, that should solve the problem.

can you get into recovery mode and download mode?

[Q] How to flash Jelly Bean on Samsung Galaxy S/SHW-M110S ?

Hello everyone ,
I own a Samsung Galaxy S/SHW-M110S which is rooted with tegrak kernel . I want to install Jelly Bean 4.2.1 ROM on my device but I don't know how to perform it coz I'm new here in this thread and I don't have any idea about flashing , ROMS and all .
I viewed some of the threads on flashing Jelly Bean on my device and I tried all those but none of them worked . I have 2.3.6 android version . Please explain me in detail so I can flash my device with Jelly Bean .
What are the things I need ?
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !

RaulST said:
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !
Click to expand...
Click to collapse
go here or click PIT STOP link below for guide

Not working
xsenman said:
go here or click PIT STOP link below for guide
Click to expand...
Click to collapse
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .

RaulST said:
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .
Click to expand...
Click to collapse
The procedure has been explained as clearly as possible on the guide so please read it carefully and follow it to the dot...as the steps has been tested and never failed only the Jelly Bean ROM is not fully stable and you will not have ringtone.
is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.

is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.
Yeah , finally I flashed my phone . Yes my mistake was I was using power button instead of using recovery buttons :laugh:
Now finally able to use jellybean , thank you so much ! Much appreciated !
Thank you .

hello
the download link for the 4.2.1 rom seems not working anymore.can anyone provide an alternative download link?thanks

SOS : Unable to boot after perseus kernel

Hi guys ,
Trying to install Andriod 4.4 but not getting baseband . After trying several methods , I read somewhere that installing perseus kernel can solve the problem. So download and flashed the kernel . Since then phone boots upto S3 logo and dies .
I have tried booting up in recovery but does not happer . please advise what shall i do ?
Thanks !

Flash stock firmware via Odin to get a bootable phone first .
Then read the network efs/ imei stickies .

JJEgan said:
Flash stock firmware via Odin to get a bootable phone first .
Then read the network efs/ imei stickies .
Click to expand...
Click to collapse
Thanks , yeah figured that out after reading for hours. tried searching for stock image but was unable to find one that works in odin.
Found one but that was over 1.1 GB but download server did not allowed free download for that.
BTW I can access download mode and have installed Odin 3.9 successfully , just looking for stock image to try flashing.
PS : Mine stock is Australia S3 4G telstra , not sure if other stock images would work or not but really appreciate if someone can refer to me stock image that can be downloaded.

namz said:
Hi guys ,
Trying to install Andriod 4.4 but not getting baseband . After trying several methods , I read somewhere that installing perseus kernel can solve the problem. So download and flashed the kernel . Since then phone boots upto S3 logo and dies .
I have tried booting up in recovery but does not happer . please advise what shall i do ?
Thanks !
Click to expand...
Click to collapse
Have you had Perseus kernel installed previously?
EDIT: Oops, not quite used to the whole 2015 thing yet, sorry for necrobumping.