Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks
There's the RTM version now available, check for Hash to be sure it's the real deal, and use the same install instructions. I recommed you use Windows Update before drivers, then install what is left because there's some new drivers like Authentec TrueSuite which is only downloadable through manufacturers. All works
mrabie said:
Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks
Click to expand...
Click to collapse
I'm running Win 7 RC for a while now on my shift... and everything is fine... I don't know what is the issue you have. maybe you should try to reinstall it and check if you have a correct version of Win 7 RC.
Hello,
I couldn't post in the development section so i had to use this section. I'm having some problems with ther Linux app (Ubuntu Installer precisely). I downloaded the free version and installed the small ubuntu image. It worked more or less, but the terminal (the GUI one) didn't worked at all (it opens but I can't type on it). So, i removed the ubuntu filed, installed the paid version and downloaded the ubuntu 10.10 full version. Now ubuntu don't even boot and i keep getting this error: data.imagup .com/10/1150222241.png
Can anyone please help me make it run ? I'm on a rooted stock LC1 rom.
Hey,
This is in the wrong section I think it belongs in q and a.
But to respond to your problem, many users have not experienced and so cannot help you with.
Also, you may want to just reformat the hard drive with a different verison of linux.
Thanks
R3PORTED - For move
Hi all, finally I registered here at xda today because of the great new HP TPToolbox that jcsullins provides here.
This is really really great !! Many thanks !
As a newcomer to this forum I somehow can not comment on the original thread ( ) although I'm developer for decades ..
Well - so far I've been around on webosnation and other forum - but here I find that the core of development happens here.
XDA seems to be a great place to be - as a developer.
1. About the posting from jcsullins: http://forum.xda-developers.com/showpost.php?p=52765181&postcount=5
It read:
> Only Touchpad Wifi supported (not 4G) at this time
I assume this is really limited to the released HP TouchPad and does not include the never released HP TouchPad Go (7" device) - right ?
2. I read:
> Reflash A6 Firmware allows you to reflash the A6 firmware.
I very much assume I can not use this if my TP is bricked (my TP does not show anything on the screen and no light at the home button).
So - I guess - I first need to do through the TPdebrick procedure.
Sure I know these instructions: http://rootzwiki.com/topic/38786-tpdebrick-v004 Again, thanks to jcsullins for providing these too.
( Also - I wonder if there is a way to use these instructions from a Win7 system too ?)
3. In terms of using TPToolbox to get Android installed on TP:
Till today I run only webos 3.0.5 on my TouchPads and I want to keep webos around. I have 32GB (Wifi) and 64GB (Wifi) and TP GO (Wifi).
What is the recommendation before installing some Android (4.4) on a TP. Do I need to rearrange / clean up some of the existing webos volumes?
Imagine - I have no experience with Android setup. I read all of the TPToolbox thread - but found no guidance for people who want to keep webos on the same device. And I have no good understanding of what the limitations/drawbacks are when running webos and Android on the same device.
4. I read:
> It will then install moboot (which is included in TPToolbox)
I have no clear understand what moboot is doing and if needed how to remove it again. Will it allow me to boot in Android or webos ?
How many Android versions can I install in parallel and then select one at boot time ?
5. A final question for now. Is there any consideration that in future TPToolbox could allow installing openWebOS if this becomes available for existing TP devices?
anyone with some answer please ?
anyone with some answer please ?
No need to answer all questions at once.
I'm most interested in comments about question (3):
what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
[email protected] said:
anyone with some answer please ?
No need to answer all questions at once.
I'm most interested in comments about question (3):
what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Click to expand...
Click to collapse
OPINIONS ARE subjective as you you appear to have several tablets it is in your best interests to test out and find what works for you. I personally am using Milaq's.
Have fun trying them.
sstar said:
OPINIONS ARE subjective as you you appear to have several tablets it is in your best interests to test out and find what works for you. I personally am using Milaq's.
Have fun trying them.
Click to expand...
Click to collapse
Thanks for your comment. So far I have no idea what "Milaq" is: I assume some kind of Android version - but such version is not documented with TPToolbox - so, for sure I will not use that for now.
My question (3) is more about hard facts: what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Will both OS run well on a 32GB system if both are installed and they use some shared disk space (volume?). I would consider at least 5GB of shared disk space to allow (video) file exchange on the device.
What is a recommended configuration to run webos and Android on the same device. Or doesn't it make sense at all and better use 2 devices?
Will TPToolbox optimize the volume size for both OS?
Can I configure the default OS at boot time? How to do? (Can I run Android apps inside a webos window?)
Unable to navigate TP Toolbox UI
I'm trying to use TP Toolbox to install Android on my TP. When I reach the TouchPad Toolbox UI on the tablet, the volume keys aren't working to navigate, so I have no way to select Complete Data Reset. Any ideas??
[email protected] said:
Thanks for your comment. So far I have no idea what "Milaq" is: I assume some kind of Android version - but such version is not documented with TPToolbox - so, for sure I will not use that for now.
My question (3) is more about hard facts: what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Will both OS run well on a 32GB system if both are installed and they use some shared disk space (volume?). I would consider at least 5GB of shared disk space to allow (video) file exchange on the device.
What is a recommended configuration to run webos and Android on the same device. Or doesn't it make sense at all and better use 2 devices?
Will TPToolbox optimize the volume size for both OS?
Can I configure the default OS at boot time? How to do? (Can I run Android apps inside a webos window?)
Click to expand...
Click to collapse
As you point out, this is the place for answers. All of your questions have been answered in other threads. Search is your friend. WIth respect to the TP GO, it does not appear to have ever been released, but if you have one, you'll have to answer your own questions because no one here has ever mentioned having one:
http://www.pcmag.com/article2/0,2817,2397197,00.asp
Touchpad linked to google account acting badly
J Scullins Toolbox installed with ease. Many thanks. Freed up memory and eliminated WebOS (pretty but pretty useless). Booted fine, loaded CM 11 4.4.2. Then asked if I wanted to restored my google apps from google account. I did. Began updating apps, but included all apps I've ever installed on any android device and loaded my current phone (Galaxy 3) wall paper. Repeated message -> "Unfortunately Trebuchet has stopped" Did not seem to affect downloading updates. Then died. Plugging into charger (wall socket) did not wake it up. Charged all night. Nothing. Unplugged and plugged in again, self-rebooted to boot menu, but has phone screen and shows charging at 1%. Should I reboot to restore mode and start over? Anyone having charging issues after using Toolbox? Thanks.
shumash said:
As you point out, this is the place for answers. All of your questions have been answered in other threads. Search is your friend.
Click to expand...
Click to collapse
Thanks for promising that I should be able to find answer. I did read the complete thread about TPToolbox and few others too and search before I started this new thread - but my above 5 questions remained open. If anyone has found a good pointer please paste a URL here.
If I find correct answer myself I will put such links here.
ad (4) I think I understand moboot good enough for now. In my words it is a boot manager that comes with Android or at least you can use with Android. It is not a webos app or so. Not 100% sure how to get it on the TP device - but I assume when I install Android for first time it will also install and it will somehow stay even if Android gets deinstalled. Anyhow - any link to a good wiki page would be much appreciated.
ad (1) Yes, TP GO is a rare device - but several 100 seem to be around by now. Many of these come with some Android 2.X version installed. ( Mine was patched to webos 3.0.5 ) Ok, if noone has a GO here I have to assume that TPToolbox does not support / was not tested on TP GO. So far posting from jcsullins does not mention the TP GO at all: http://forum.xda-developers.com/show...81&postcount=5
mheath said:
I'm trying to use TP Toolbox to install Android on my TP. When I reach the TouchPad Toolbox UI on the tablet, the volume keys aren't working to navigate, so I have no way to select Complete Data Reset. Any ideas??
Click to expand...
Click to collapse
I have a TP 4G - sounds like this could be an issue? Will this Toolbox installation work on the 4G? If not, is there a good alternative to install Android?
mheath said:
I have a TP 4G - sounds like this could be an issue? Will this Toolbox installation work on the 4G? If not, is there a good alternative to install Android?
Click to expand...
Click to collapse
The original TPtoolbox thread answers this 4G question as: http://forum.xda-developers.com/showpost.php?p=52923285&postcount=65
Toolbox not working for me
Hello,
i tried Toolbox to bring life back to my Touchpad.
When i'm running this program it starts very well but i can't get the menue.
So it's not possible to run one of the menue-points.
I use Windows 7 64bit, the TP is connected with USB-sign on.
My problem:
In the WebOs-log the last line shows a flash-failure.
When i'm starting the TP, first a static HP-logo comes up, followed from a rotating HP-logo,
the a screen changes from black to white with a grey button rotating.
Any idea?
Thanks!
Rekaro said:
Hello,
i tried Toolbox to bring life back to my Touchpad.
When i'm running this program it starts very well but i can't get the menue.
So it's not possible to run one of the menue-points.
I use Windows 7 64bit, the TP is connected with USB-sign on.
My problem:
In the WebOs-log the last line shows a flash-failure.
When i'm starting the TP, first a static HP-logo comes up, followed from a rotating HP-logo,
the a screen changes from black to white with a grey button rotating.
Any idea?
Thanks!
Click to expand...
Click to collapse
Re-read the directions for TP Toolbox. You need to boot into WebOS recovery (a static usb symbol). It sounds like your TP is trying to boot into WebOS, not WebOS recovery.
A) Have novacom installed
To load TPToolbox, you will need novacom to be installed on your PC.
You can download and install novacom from http://www.openwebosproject.org/open.../packages.html
Or, you can download and run a java-based "universal installer" from http://code.google.com/p/universal-n...downloads/list
B) Put the Touchpad into webOS recovery mode and connect via USB cable to PC
NOTE: Even if webOS is removed, webOS recovery will still exist as it's built into the bootloader.
If you have moboot already installed, just select "webOS recovery" there.
Or, power the Touchpad off via webOS, then with the Touchpad is off, hold VolumeUp (closest to Power) and Power until you see the USB symbol.
Or, hold Power+Home until the screen changes (about 10 secs) and then start holding the VolumeUp button until you see the big USB symbol.
Click to expand...
Click to collapse
shumash said:
Re-read the directions for TP Toolbox. You need to boot into WebOS recovery (a static usb symbol). It sounds like your TP is trying to boot into WebOS, not WebOS recovery.
Click to expand...
Click to collapse
Thanks,
no it's in recovery mode i'm shure. A big usb symbol on the screen and some other lines.
I can then open the terminal-window and connect the Touchpad.
I add here pictures what happens when i type the commands "printenv" and "token".
When i type reboot, the TP starts correct to boot, first the static HP sign, then a greyed HP sign and then a screen (see the picture) with a grey rotating Button.
That's it.
issue loading TPTToolbox
Sorry folks - i am fairly new at this - and we all had to start at some point - so if this is obvious to most, i apologize.. but need a little help.
I cant seem to get the Toolbox to load, i downloaded it from the post,{as well as the Novacom driver} i have extracted the three files - when i open the .bat file i get the message below. I have the TouchPad connected via USB, and windows has assigned it a letter drive and I have the big USB icon on the pad screen
message:
"
Setting Palm path ...
Checking novacom service ...
Loading TPToolbox ...
.
Cannot connect to Touchpad.
Make sure Touchpad is connected with USB cable.
Make sure Touchpad is in webOS Recovery (bootie) mode
(where big USB symbol shows on Touchpad screen)
.
"
Toolbox
I'm not sure you understand the instructions on how to do the install.
Here is a link with instructions that I used for my install:
http://liliputing.com/2014/06/use-touchpad-toolbox-install-android-erase-webos-hp-touchpad.html
While the instructions are written for windows users, I used them for my Ubuntu Linux install and everything
worked perfectly.
Recovery problem when running toolbox
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
However I am having issues with the recovery. The recovery I downloaded was update-CWM-jcs-dm-tenderloin-20140317.zip
I get the error that "No supported recovery file found. Aborting."
I've seen mention that the cable could be bad however if I have no files in the ttinstall directory, I get an error that there's no ROM. I upload the ROM and rename it and the error then is about the Recovery file so that means the ROM was in fact uploaded so the cable theory is moot.
I'm thinking the recovery file needs to be named something specific however when I have tried to use the file names listed as
Compatible Legacy ROM files:
cm-10.1-*-tenderloin.zip or
skz_tenderloin-2.11_jb_4.2.2-*.zip
Click to expand...
Click to collapse
but that doesn't work. Is the file name supposed to be something else?
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
chrisjpopp said:
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
However I am having issues with the recovery. The recovery I downloaded was update-CWM-jcs-dm-tenderloin-20140317.zip
I get the error that "No supported recovery file found. Aborting."
I've seen mention that the cable could be bad however if I have no files in the ttinstall directory, I get an error that there's no ROM. I upload the ROM and rename it and the error then is about the Recovery file so that means the ROM was in fact uploaded so the cable theory is moot.
I'm thinking the recovery file needs to be named something specific however when I have tried to use the file names listed as
but that doesn't work. Is the file name supposed to be something else?
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
Click to expand...
Click to collapse
Try the update-TWRP-jcs-dm-tenderloin-20140512.zip instead. It worked just fine for me.
chrisjpopp said:
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
......
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
Click to expand...
Click to collapse
How did you rename the file? I don't think you need to rename any file.
No matter how many times I reinstall novacom TPtoolbox will not get past
Checking Novacom services....
And goes no fauther.
I am running windows 8.1
HP Touchpad 4G - Issue running
[email protected] said:
The original TPtoolbox thread answers this 4G question as: http://forum.xda-developers.com/showpost.php?p=52923285&postcount=65
Click to expand...
Click to collapse
Good thing I didn't wipe webOS off! I'd have a nice frisbee. Hopefully these guru's will fix that issue and we can all be happy. Thanks JCSullins.
Hi there, so I saw that you do a lot of videos about the HP touchpad, Basically I decided to delete android off my touchpad and I did but in the process I also deleted webos. Only thing that comes up is the webOS logo and that's it...I've tried to use webOS doctor and WebOS quick installer but for some reason these programs refuse to pick up the device. All my computers are seeing my device as "palm" and "unidentified" I tried looking for the drivers but because it's such a out dated I couldn't find anything...please help me get webOS back!!
coolzab123 said:
Hi there, so I saw that you do a lot of videos about the HP touchpad, Basically I decided to delete android off my touchpad and I did but in the process I also deleted webos. Only thing that comes up is the webOS logo and that's it...I've tried to use webOS doctor and WebOS quick installer but for some reason these programs refuse to pick up the device. All my computers are seeing my device as "palm" and "unidentified" I tried looking for the drivers but because it's such a out dated I couldn't find anything...please help me get webOS back!!
Click to expand...
Click to collapse
Do you have novacom and novaterm installed, including Java Runtime Environment? hope it helps
http://forum.xda-developers.com/hp-...roid-4-4-x-t2912820/post56167358#post56167358
A)You must have the novacom software installed on your PC before running Jcsullins Touchpad Toolbox.
Download and run the Universal Novacom Installer 1.4.1. Click here:
Note:You will need to have Java installed to run the Universal installer. Click here:
Note: You may need to reboot after installing this software.
Or
Download, extract and install the appropriate version of Novacom for your OS. Click here:
Note: Under Linux the Novacom driver is installed at /opt/Palm run it from this location.
ashTP88 said:
Do you have novacom and novaterm installed, including Java Runtime Environment? hope it helps
http://forum.xda-developers.com/hp-...roid-4-4-x-t2912820/post56167358#post56167358
A)You must have the novacom software installed on your PC before running Jcsullins Touchpad Toolbox.
Download and run the Universal Novacom Installer 1.4.1. Click here:
Note:You will need to have Java installed to run the Universal installer. Click here:
Note: You may need to reboot after installing this software.
Or
Download, extract and install the appropriate version of Novacom for your OS. Click here:
Note: Under Linux the Novacom driver is installed at /opt/Palm run it from this location.
Click to expand...
Click to collapse
Err I'm confused Sorry, I'm so new to all this. So I have Novcom, Novaterm and JRE(Java Run time environment) Do I now just run the WebOS Doctor?
EDIT: I tried that and still it WebOS Doctor does not work.
Read my Super Easy way thread for full details on everything
coolzab123 said:
Hi there, so I saw that you do a lot of videos about the HP touchpad, Basically I decided to delete android off my touchpad and I did but in the process I also deleted webos. Only thing that comes up is the webOS logo and that's it...I've tried to use webOS doctor and WebOS quick installer but for some reason these programs refuse to pick up the device. All my computers are seeing my device as "palm" and "unidentified" I tried looking for the drivers but because it's such a out dated I couldn't find anything...please help me get webOS back!!
Click to expand...
Click to collapse
So you did a complete data reset and you want to reininstall WebOS. You've already run the TPtoolbox from your PC so you must already have the novacom software installed. You just need to read the last two lines in my thread info to find the detailed instructions you'll need.
A)(Optional) Complete Data Reset, Completely Removes WebOS and Android
-The procedure will completely remove WebOS and Android from the device. The partitions/volumes will be rebuilt new and boot will be remade with a minimal amount of programs provided by the TPToolbox.
-Scroll down to Complete Data Reset and select it with the home button and choose yes to begin the process.
-If you previously did step number 3 then skip this step and proceed to step B.
-If you previously removed WebOS but want to add it back use Jcsullins instructions click here:
-If you need to bypass the WebOS activation get the tool and instructions click here:
Read this thread.
[ROM GUIDE]How to install Android 5.x.x/4.4.x with Jcsullins TPtoolbox Super Easy Way
RolandDeschain79 said:
So you did a complete data reset and you want to reininstall WebOS. You've already run the TPtoolbox from your PC so you must already have the novacom software installed. You just need to read the last two lines in my thread info to find the detailed instructions you'll need.
A)(Optional) Complete Data Reset, Completely Removes WebOS and Android
-The procedure will completely remove WebOS and Android from the device. The partitions/volumes will be rebuilt new and boot will be remade with a minimal amount of programs provided by the TPToolbox.
-Scroll down to Complete Data Reset and select it with the home button and choose yes to begin the process.
-If you previously did step number 3 then skip this step and proceed to step B.
-If you previously removed WebOS but want to add it back use Jcsullins instructions click here:
-If you need to bypass the WebOS activation get the tool and instructions click here:
Read this thread.
[ROM GUIDE]How to install Android 5.x.x/4.4.x with Jcsullins TPtoolbox Super Easy Way
Click to expand...
Click to collapse
Hey thanks! Everything has been fixed
I havent used my Touchpad for a year or so but took it on holiday to Portugal. I tried getting my GMAIL to work and it would not. So I did a partial wipe. Now it lets me say what country I am and what language then goes to wifi screen. It shows its picking up my wifi and lets me sign in then an error message comes up and it goes no further I understand Webos is not supported any more so was wondering how to load a new software package ( Android?) and start again. Help please?
Install Android and you're good
rose28454 said:
I havent used my Touchpad for a year or so but took it on holiday to Portugal. I tried getting my GMAIL to work and it would not. So I did a partial wipe. Now it lets me say what country I am and what language then goes to wifi screen. It shows its picking up my wifi and lets me sign in then an error message comes up and it goes no further I understand Webos is not supported any more so was wondering how to load a new software package ( Android?) and start again. Help please?
Click to expand...
Click to collapse
Android would be the way to go, WebOS is no longer supported. Jcsullins TPtoolbox with make it happen, have fun.:highfive:
[ROM GUIDE]How to install Android 5.x.x/4.4.x with Jcsullins TPtoolbox Super Easy Way
RolandDeschain79 said:
Android would be the way to go, WebOS is no longer supported. Jcsullins TPtoolbox with make it happen, have fun.:highfive:
[ROM GUIDE]How to install Android 5.x.x/4.4.x with Jcsullins TPtoolbox Super Easy Way
Click to expand...
Click to collapse
I had a look and think I can do that. But couple questions. How can I get past the screens I mentioned in my post and secondly how can I download if I cant get on internet on the TP?
rose28454 said:
I had a look and think I can do that. But couple questions. How can I get past the screens I mentioned in my post and secondly how can I download if I cant get on internet on the TP?
Click to expand...
Click to collapse
You'll need to connect the touchpad to a PC prior to using the toolbox. It'll let the PC read the touchpad as a USB mass storage device and you can migrate your ROM, GAPPS, etc. onto the device and let the toolbox work its magic .
rfoster2009 said:
You'll need to connect the touchpad to a PC prior to using the toolbox. It'll let the PC read the touchpad as a USB mass storage device and you can migrate your ROM, GAPPS, etc. onto the device and let the toolbox work its magic .
Click to expand...
Click to collapse
I tried for 4 hours last night and eventually downloaded the Novacom but it would not work. Any ideas?
Instructions start with step #1
rose28454 said:
I tried for 4 hours last night and eventually downloaded the Novacom but it would not work. Any ideas?
Click to expand...
Click to collapse
It took you 4hrs to get to step 1? Further explanation is needed here, the steps are in an order for a reason.
If you're having issues getting the novacom drivers installed disable any antivirus or spyware protection that might be preventing the program from downloading the correct drivers for your system. Also make sure you have java installed and reboot after installing everything.
1)Getting started, Requirements and Preparation:
A)You must have the novacom software installed on your PC before running Jcsullins Touchpad Toolbox.
Download and run the Universal Novacom Installer 1.4.1. Click here:
Note:You will need to have Java installed to run the Universal installer. Click here:
Note: You may need to reboot after installing this software.
Or
Download, extract and install the appropriate version of Novacom for your OS. Click here:
Note: Under Linux the Novacom driver is installed at /opt/Palm run it from this location.