HI everyone
my phone dosnt trun on , i dont access to downloading mode or recovery mode i tried all method like take out battery and connect to usb and put battery back , and etc ...
my qoestion is why this happen ? flashing Rom or changing partition system maybe break my internal storage , ?
Flashing Rom (custom on Custom ) can harm ineternal storage ?
my opinion is it not make any sense that i have no power to turning on ? if its my storage is dead i should see backlight of lcd or my button is that right ?
mahdik.m said:
HI everyone
my phone dosnt trun on , i dont access to downloading mode or recovery mode i tried all method like take out battery and connect to usb and put battery back , and etc ...
my qoestion is why this happen ? flashing Rom or changing partition system maybe break my internal storage , ?
Flashing Rom (custom on Custom ) can harm ineternal storage ?
my opinion is it not make any sense that i have no power to turning on ? if its my storage is dead i should see backlight of lcd or my button is that right ?
Click to expand...
Click to collapse
Try check your battery power. If it is drained, try to charge it with other s3 mini phone/stand alone charger(the one can charge your battery without phone). When charged(the battery) put in your phone and try to switch on. Make sure you check the device temperature constantly. If it does heat up a lot, take batteries out, let it cool a little, and try again.
Tell me if this work. (This just happen to me yesterday, so I'm telling by my experience, not technical knowledge). Hope it will work for you. Good luck.
Related
I have opened thread in general section but nobody looks up..
http://www.youtube.com/watch?v=oOmxwKDMkrA
I got same bug on my i9001 for 2 days and cant fix it. What should i do ? Its really annoying i cant use my phone..
settings->applications->development->usb debug on!
XER0123 said:
I have opened thread in general section but nobody looks up..
http://www.youtube.com/watch?v=oOmxwKDMkrA
I got same bug on my i9001 for 2 days and cant fix it. What should i do ? Its really annoying i cant use my phone..
Click to expand...
Click to collapse
First of all I recomment you strongly to read this guide.
Your problems will dissapear if you enable USB Debugging
How to enable USB-Debugging:
Enter in the settings of your phone
Enter in the “Applications”
Enter in “Development”
Enable “USB-Debugging”
(from the guide)
fabsau said:
First of all I recomment you strongly to read this guide.
Your problems will dissapear if you enable USB Debugging
How to enable USB-Debugging:
Enter in the settings of your phone
Enter in the “Applications”
Enter in “Development”
Enable “USB-Debugging”
(from the guide)
Click to expand...
Click to collapse
Thank you guys
Now at least i got a usable phone
But it still goes charging, not charging, charging , not charging crazily and its really laggy
I am not using usb connection, i dont know why my phone thinks its connected and disconnected usb crazily :/
Flash custom rom or XXKQB value pack it's i think fix this!
XER0123 said:
Thank you guys
Now at least i got a usable phone
But it still goes charging, not charging, charging , not charging crazily and its really laggy
I am not using usb connection, i dont know why my phone thinks its connected and disconnected usb crazily :/
Click to expand...
Click to collapse
which rom are you using? which kernel?
is maybe your wire broken?
xewier said:
Flash custom rom or XXKQB value pack it's i think fix this!
Click to expand...
Click to collapse
Thank you
I have already flashed XXKQB rom and wiped all my data Not fixed.
fabsau said:
which rom are you using? which kernel?
is maybe your wire broken?
Click to expand...
Click to collapse
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah and Sorry for my bad english...
XER0123 said:
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah Sorry for my bad english...
Click to expand...
Click to collapse
how did you wipe your data? just a factory reset? Try please this:
6. How to format:
Do this every time before flashing a stock- or custom-rom!
Attention!
You will delete everything on your phone! Your phone will not even be able to boot! Only Clockworkmod and the Download-Mode will be left! (Your SIM-Card will be untouched)
Please make sure that you saved only your backups on another device before formatting your phone (like on your computer)
This is the best method for using the full experience of every custom rom! I recommend this method because in the past a lot of users had issues with custom roms. They had installed a lot of different custom roms before and they didn´t format their phone correctly before flashing the new rom. This caused a lot of problems
Enter in the Clockworkmod
Choose “Mounts and storage”
Select all after all
Format /system
Format /cache
Format /data
Format /system
Format /emmc
Format /sdcard
After formatting flash again the value pack, activate usb debugging and report please then your status.
If the problem does not dissapear you should send it for a repairation...
fabsau said:
how did you wipe your data? just a factory reset? Try please this:
6. How to format:
Do this every time before flashing a stock- or custom-rom!
Attention!
You will delete everything on your phone! Your phone will not even be able to boot! Only Clockworkmod and the Download-Mode will be left! (Your SIM-Card will be untouched)
Please make sure that you saved only your backups on another device before formatting your phone (like on your computer)
This is the best method for using the full experience of every custom rom! I recommend this method because in the past a lot of users had issues with custom roms. They had installed a lot of different custom roms before and they didn´t format their phone correctly before flashing the new rom. This caused a lot of problems
Enter in the Clockworkmod
Choose “Mounts and storage”
Select all after all
Format /system
Format /cache
Format /data
Format /system
Format /emmc
Format /sdcard
After formatting flash again the value pack, activate usb debugging and report please then your status.
If the problem does not dissapear you should send it for a repairation...
Click to expand...
Click to collapse
I will try now. Thank you
http://www.youtube.com/watch?v=0zmDLm8koXQ
I found this, almost same with my problem. soo annoying.
XER0123 said:
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah and Sorry for my bad english...
Click to expand...
Click to collapse
this seems to be a hardware problem.. i think your usb port is grounded.. check if there is something stuck inside... even if you flash different roms it will still detect charging.... you can have it checked in a service center just to be sure....
Hi everybody,
I have a problem with my Gt-I9001.
Yesterday I tried to put Rom application on my phone and now he is not responding anymore.
I selected in Clockworkmod to restart in recovery mode wich he did.
He made a properly back and started to load the Rom Siyah-s3-v1.2.6-CWM wich is incorrect for this phone. He installed it and drop dead.
He doesn't respond to the normal recovery or download buttom combo's.
There's no light, nothing on the phone.
What to do? Please help?
Thanks for your valuable time!
hmmm...remove the battery for 10 sec,put the battery and try to put in townload mode power off+home button+volume down.if dont work make an jig.how?:you need resistor with value=300 K Ω,remove the plastic from the micro usb.(buy an samsunc usb caple pc-device).look in pictures how to stick the wires:http://www.forum.scorpyons.ro/thread-8.html
and you can look in the video how to put in download mode with jig.(remove battery,put the jig,put batery,and wait for downloade mode.and install an rom with odin.(if you dont know smth pm me),but if with jig dont work,i think its a permanent brick.(only samsung can solve if is a permanent brick)
thnx man, but i went to the shop and gave him in for repare. Let's see what it brings.
cheers
You can throw it away.
Hello:
Recently reflash CM ROM and was working fine. Then I noticed that the missing of Google APKs, so without any wipe, I flash gapps from zip copied in microsd card.
Then on reboot, it loops in the boot animation for more than 10 min (I was attending a patient, I'm doctor). I removed the battery several times and the same thing happened until it stopped power on.
I did the battery trick many times, but did not turn on anymore. All that happens is that when I put the charger gives me the green LED d that the battery is charged.
I went to a workshop cel and they said it was damaged and I need to recopy the bootloader via MEDUSA ( JTAG ) . But no, it didn't worked at all. Then they said that maybe is the power button problem (but it don't turn on with battery trick !!!!)
I am very sad about this and then other technician told me that if after JTAG not raised , then it has no solution for my cell .:crying:
- Is my cel definitely brick ?
- Anyone know what to do to get it back ?
- It is true that after JTAG that doesn't work anymore, the cel definitely is broke?
Please, help me....
Note: The PC don't recognize the phone using USB cable...
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
simoneluconi said:
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
Click to expand...
Click to collapse
He have so much battery... :'(
maybe you did the wrong thing in the wrong moment, the phone broke while you were updating. Or try with a different charger
wavexda said:
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
Click to expand...
Click to collapse
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
anuraag122 said:
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
Click to expand...
Click to collapse
Thx my firend. Yes I know and I do that. Here is what i posted after wen i finish that method:
After brick my MI3, I use the methodr to fix my phone with wire. I open MI3, put wire on test points and tray to FLASH. But I never finish flash. Then i remove the wire and I make Flash without WIRE
After flash, I have 7 local disk in my computer from MI3. Two local disk are 63.9 MB and they are just free 11.5MB, and other 5 local disk want to do a format disk.
When I back battery I can't turn on my phone, and wont charge. If I put USB in him he will have the same local disk like without battery.What to do?
Now I can do a Flash with, and witout battery. But they are the same problem. PC recognize MI3 but it wont turn ON, won't charge.
What to do now?
Click to expand...
Click to collapse
Service center
in any condition fastboot mode should be open. if not, only possibility low battery. or else service center
try ADB flash..search in google..it may help..if ur pc recognizes ur phone.
Unbrick Completely Dead Mi3 With No Fastboot/Recovery http://en.miui.com/thread-73348-1-1.html
credits to @subhrajitnath
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Elshan_Nurmammadov said:
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Click to expand...
Click to collapse
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to try let it charging for 24+ hours and see if something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
I might be reckoning wrong, but I believe I've recovered my T several times using stock firmware in such case.. Then go again with CM or whatever.
landerxxx said:
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Click to expand...
Click to collapse
MaliSimo said:
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to tryif something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
Click to expand...
Click to collapse
after+ 12hr of charging i see blinked red every 2 mint .... what can ido for this ??plz help sorry for bad english
Sorry for the late reply. Its a good sign, so now you know your phone its not hard bricked. There's hope!!! Let it charge for other 12+ hours and you should see the blinking red led becoming continuous. Then you could try flashing a kernel and a custom recovery, if it works you can try flashing a ROM. Alternatively you can try to flash a stock ROM via flashtool.
Anyway now you know the phone it's alive, keep trying and you will able to bring it back to life.
Many thanks for you pro.... but usb not recognized or appear like "Qualcomm driver ..any advice ....any way I could leave it in charger and try again....Thanks for ur reply...
Maybe you can try, if you didn't already, to install the latest Sony flashtool, browse the installation folder, search for drivers and use the installation tool to reinstall the blue board 3 drivers (if you are using win 10 you may need to disable the driver signature to install the drivers properly).
I got the same problem with my Xpetia T, here I will report the steps I followed:
1. The phone didn't respond to any command, even to hard reset (pressing power button and volume + for 10s until you don't feel 3 vibrations, not recommended to do that, but I was a little frustrated).
2. I let it charging for a bit then I tried to flash a stock ftf file ( Installing the drivers just how I explained at the beginning) via flashtool. I managed to put the phone in flash mode but the procedure failed when the program started to flash the system file.
3. So I let it charge for 25h: in the first 5h no led showed up, then blinking red led, then continuous red led and finally continuous green led.
4. After that I retried to flash a stock ROM via flash tool but the procedure failed again when it was flashing the file system.
5. So I made a desperate try: I flashed all partitions but system via flash tool, then I extracted the system partition opening the ftf file with a zip manager and I used the fastboot functionality in flashtool to flash the system partition.
6. After I did that, I didn't see any improvement and I decided to put the phone in charge again and..... The kernel battery charging symbol appeared!!!
7. I let the phone charge over night then I booted it up! He booted in provisory mode and I managed to turn on USB debug and I gave permissions to my PC.
8. Then I installed TWRP via adb and so Linage 14.1 custom ROM.
The only problem I found it's my battery is practically dead, so I will try to replace it by my self in near future (this phone as known battery issues)
This is the method I followed, I don't know if is equally good for your case but I Hope this steps somehow help you.