Related
Basically my old Sensation is screaming die and I have my eyes on the Moto X, but I can't decide if I should wait and stick with T-Mobile or switch to AT&T. Main things I'm considering:
I would like to use Moto Maker, which AT&T has for at least 2 months (according to rumors).
T-Mobile should be getting the black or white versions "soon."
T-Mobile's plans are $10-20 per month cheaper for my situation, assuming current cost estimates of the Moto X.
T-Mobile might have less bloatware (no carrier branding in the notification area).
I guess what it really comes down to: Is AT&T's network/user experience that much better than T-Mobile's to justify the increased cost, bloatware, and exclusive customization? While the weight of Moto Maker is definitely a personal thing, please let me know your thoughts on the difference in the networks? Having only used a smartphone the T-mobile network, I just don't know if there would even be a discernible difference.
Thanks! :good:
felisen said:
Basically my old Sensation is screaming die and I have my eyes on the Moto X, but I can't decide if I should wait and stick with T-Mobile or switch to AT&T. Main things I'm considering:
I would like to use Moto Maker, which AT&T has for at least 2 months (according to rumors).
T-Mobile should be getting the black or white versions "soon."
T-Mobile's plans are $10-20 per month cheaper for my situation, assuming current cost estimates of the Moto X.
T-Mobile might have less bloatware (no carrier branding in the notification area).
I guess what it really comes down to: Is AT&T's network/user experience that much better than T-Mobile's to justify the increased cost, bloatware, and exclusive customization? While the weight of Moto Maker is definitely a personal thing, please let me know your thoughts on the difference in the networks? Having only used a smartphone the T-mobile network, I just don't know if there would even be a discernible difference.
Thanks! :good:
Click to expand...
Click to collapse
It will vary from city to city, but unless I was really strapped for cash, I'd pay $10 extra for AT&T. Here in DC, I'm always on LTE on ATT, but on T-Mobile I'd say I saw edge at least a couple of times per week.
Sent from my XT1058
There is surprisingly little bloatware on the at&t model.
Sent from my XT1058 using Tapatalk 2
linuxgator said:
There is surprisingly little bloatware on the at&t model.
Sent from my XT1058 using Tapatalk 2
Click to expand...
Click to collapse
Good to know thanks! I guess my only worries with respect to the bloatware is the AT&T logo in the notification area and something about an app that constantly popups asking to use it when calling someone (or something like that, it may have just been speculation I read).
I was going to start a new topic, but this forum is essentially the subject I wanted to ask about:
I'm thinking about getting the T-Mobile version of the Moto X because from everything I've read in these forums it's a bloatware-free device and has an unlocked SIM and (maybe) an unlockable bootloader.
I'd get the device to use on AT&T. What are the disadvantages of doing this (if any)?
-It sounds like there could be issues activating? Should I count on any such issues being surmountable?
-Will I receive over-the-air software updates?
-Will signal strength be in any way impacted?
-Will I have all the frequencies I need? I saw someone write that the T-Mobile version supports LTE bands 4 , 12 , 17 and the AT&T version supports bands 2, 4, 5, 17. It seems like in the USA AT&T only uses 4 and 17?
-What about 3G and voice signals?
-Using the phone overseas, say, Europe?
-Will any of this affect battery life compared with just using an AT&T phone on the AT&T network?
-People have said that if you unlock the bootloader you void the warranty. Whose warranty--Motorola's? Would this include dropping the phone and breaking the glass? I was considering getting an extended warranty--would someone like SquareTrade care about an unlocked bootloader if physical damage occurred?
Lastly, people have said that the AT&T version of the phone is not bad in terms of bloatware. Does anyone think it makes more sense to just get the AT&T version of the phone?
That's a lot of questions. Any insight into any of them will be greatly appreciated.
Thanks!
This might help you guys to decide:
The reason T-Mobile users need to get this model is because it's the only Moto X which supports T-Mobile's HSPA+ 42 network on the AWS band. The AT&T-compatible Moto X supports T-Mobile's LTE, but not the HSPA band, which means that if you fall off of LTE you'll be in T-Mobile's much more limited, slower 1900MHz HSPA+ 21 coverage.
likeybikey said:
I was going to start a new topic, but this forum is essentially the subject I wanted to ask about:
I'm thinking about getting the T-Mobile version of the Moto X because from everything I've read in these forums it's a bloatware-free device and has an unlocked SIM and (maybe) an unlockable bootloader.
I'd get the device to use on AT&T. What are the disadvantages of doing this (if any)?
Click to expand...
Click to collapse
Okay, I'll answer what I can here. I just got my tmo Moto X from the recent discount and I have lines with both T-Mobile and AT&T.
-It sounds like there could be issues activating? Should I count on any such issues being surmountable?
Click to expand...
Click to collapse
I had no issues swapping either operator's SIM into my phone. It was SIM unlocked out of the box and the AT&T SIM worked great--native tethering even worked without a mod (sadly still see no solution for native tmo tethering).
-Will I receive over-the-air software updates?
Click to expand...
Click to collapse
I would expect you to receive the same OTA updates as anyone running a tmo Moto X regardless of the att SIM.
-Will signal strength be in any way impacted?
Click to expand...
Click to collapse
No. Many AT&T devices display more bars for a given signal strength than the same device on other operators (i.e. AT&T falsely makes signal look better than it is); I don't know if the AT&T Moto X does that or not, but it's just a display thing and not an actual difference.
-Will I have all the frequencies I need? I saw someone write that the T-Mobile version supports LTE bands 4 , 12 , 17 and the AT&T version supports bands 2, 4, 5, 17. It seems like in the USA AT&T only uses 4 and 17?
Click to expand...
Click to collapse
My understanding is that those frequencies are correct. I get LTE on both operators just fine.
-What about 3G and voice signals?
Click to expand...
Click to collapse
I haven't had any issues with either. Your frequency bands are all covered for everything AT&T does here in the US.
-Using the phone overseas, say, Europe?
Click to expand...
Click to collapse
The AT&T version may be more likely to get LTE there--I am not familiar with the LTE bands used in Europe--but neither will have trouble attaching to the various European 3G networks (assuming you somehow convince AT&T to give you a SIM unlock code, or pay for one). Also if you include Canada in your calculations, a number of their networks will benefit from HSPA over AWS.
-Will any of this affect battery life compared with just using an AT&T phone on the AT&T network?
Click to expand...
Click to collapse
It shouldn't.
-People have said that if you unlock the bootloader you void the warranty. Whose warranty--Motorola's? Would this include dropping the phone and breaking the glass? I was considering getting an extended warranty--would someone like SquareTrade care about an unlocked bootloader if physical damage occurred?
Click to expand...
Click to collapse
Yes, Motorola's warranty. As for other stuff, you'd have to ask SquareTrade (or whoever) to be sure, but I don't really see how unlocking the bootloader would make them reluctant to replace your cracked-glass phone.
Lastly, people have said that the AT&T version of the phone is not bad in terms of bloatware. Does anyone think it makes more sense to just get the AT&T version of the phone?
Click to expand...
Click to collapse
If you're buying unlocked anyway, I think the tmo version is an easy choice unless you desperately need a new nano-SIM (though I think AT&T will give you one for free if you drop by a store). The bloatware may not be that bad on the AT&T version, but you have to use some awkward hacks to get system r/w and the like. Of course if you're willing to do that, then you can kill the bloatware anyway.
teiglin said:
snip
No. Many AT&T devices display more bars for a given signal strength than the same device on other operators (i.e. AT&T falsely makes signal look better than it is); I don't know if the AT&T Moto X does that or not, but it's just a display thing and not an actual difference.
snip
Click to expand...
Click to collapse
Funny you should mention that. The AT&T 4.4 build has 5 bars to display the cellular signal strength, the tmobile 4.4 build only has 4. It is quite odd they are not the same, wonder who wanted something different...
Steve-x said:
Funny you should mention that. The AT&T 4.4 build has 5 bars to display the cellular signal strength, the tmobile 4.4 build only has 4. It is quite odd they are not the same, wonder who wanted something different...
Click to expand...
Click to collapse
I believe AT&T using five bars vs. T-Mobile's four predates their cheating on signal strength, but I could be wrong. I've only been a T-Mobile customer for about a year (and have now almost entirely phased out AT&T, woohoo!).
The lesson is that signal bars are misleading at best, meaningless and confounding at worst. Check the numeric signal strength if you're interested in knowing how good your signal really is.
Super-awesome reply! Thank you so much for taking the time to answer my questions. It really helps my decision process (I'm feeling emboldened to go for the T-Mobile version), and I'm sure this will help others as well. Thanks again!
teiglin said:
Okay, I'll answer what I can here. I just got my tmo Moto X from the recent discount and I have lines with both T-Mobile and AT&T.
Click to expand...
Click to collapse
As someone who just received his discounted Off-Contract T-Mobile Moto X, I have to recommend it. I got the $150 promotional discount and was curious myself as to which carrier version to buy. From all of the information gathered here on XDA, I made the choice to go with T-Mobile (and have no regrets, yet). I'd go into details on why I chose T-Mobile and such, but teiglin has already provided great (and accurate) answers to your questions.
So instead, I'll give you a quick recap:
- The T-Mobile version of the Moto X has absolutely no branding that I can find. Literally the only T-Mobile symbol I could find on the phone (software or hardware) was inside of it, on the T-Mobile Nano-SIM card.
- [From what I've read: motorola-global-portal.custhelp.com/app/answers/detail/a_id/87215/] The T-Mobile version is essentially the developer's edition without the additional warranty coverage for unlocking your bootloader.
- The T-Mobile version of the Moto X has almost the same frequency bands as the AT&T version (except it also supports the HSDPA 1700 MHz band and doesn't support the LTE 850 MHz band)
Copied from GSMArena: gsmarena.com/motorola_moto_x-5601.php
2G Network
GSM 850 / 900 / 1800 / 1900 - all versions
CDMA 800 / 1900 - for Verizon, Sprint3G Network
HSDPA 850 / 900 / 1900 / 2100 - for AT&T, Verizon
HSDPA 850 / 900 / 1700 / 1900 / 2100 - for T-Mobile
CDMA2000 1xEV-DO - for Verizon
HSDPA 850 / 1900 / 2100 - for Sprint4G Network
LTE 700 / 850 / 1700 / 1900 / 2100 - for AT&T
LTE 700 / 1700 / 1900 / 2100 - for T-Mobile
LTE 700 MHz Class 13 - for Verizon
LTE 1900 - for Sprint
Click to expand...
Click to collapse
My Moto X usage:
I'm a former AT&T customer, having recently switched to Straight Talk through their BYOP (Bring Your Own Phone) program. I was still using the Motorola Atrix with a Mini-SIM card purchased from Straight Talk (the AT&T compatible one).
After receiving the $150 promo code and remembering the $100 old Motorola phones trade in program, it seemed like the right time to make the move and upgrade ($500 retail down to $250 after rebates/promotions). I placed my order on December 5th and was told it would arrive by the 10th (came on the 11th due to snow).
Once I got my Moto X, all I had to do was cut my Mini-SIM card down to a Nano-SIM card. Templates can be found here: airportal.de/nanosim/. Aside from the network cutting in and out (lasted for the first 10 minutes or so), I've had no problems since. I have access to 4G LTE and everything else seems to be working fine (haven't tried tethering yet).
In the end, I'd recommend the T-Mobile version just because there is no branding and it works fine on the AT&T network as well.
Thanks for adding to teiglin's reply! Good information for anyone interested in this phone!
semaj1919 said:
As someone who just received his discounted Off-Contract T-Mobile Moto X, I have to recommend it. I got the $150 promotional discount and was curious myself as to which carrier version to buy. From all of the information gathered here on XDA, I made the choice to go with T-Mobile (and have no regrets, yet). I'd go into details on why I chose T-Mobile and such, but teiglin has already provided great (and accurate) answers to your questions.
Click to expand...
Click to collapse
4g 4glte
semaj1919 said:
As someone who just received his discounted Off-Contract T-Mobile Moto X, I have to recommend it. I got the $150 promotional discount and was curious myself as to which carrier version to buy. From all of the information gathered here on XDA, I made the choice to go with T-Mobile (and have no regrets, yet). I'd go into details on why I chose T-Mobile and such, but teiglin has already provided great (and accurate) answers to your questions.
So instead, I'll give you a quick recap:
- The T-Mobile version of the Moto X has absolutely no branding that I can find. Literally the only T-Mobile symbol I could find on the phone (software or hardware) was inside of it, on the T-Mobile Nano-SIM card.
- [From what I've read: motorola-global-portal.custhelp.com/app/answers/detail/a_id/87215/] The T-Mobile version is essentially the developer's edition without the additional warranty coverage for unlocking your bootloader.
- The T-Mobile version of the Moto X has almost the same frequency bands as the AT&T version (except it also supports the HSDPA 1700 MHz band and doesn't support the LTE 850 MHz band)
My Moto X usage:
I'm a former AT&T customer, having recently switched to Straight Talk through their BYOP (Bring Your Own Phone) program. I was still using the Motorola Atrix with a Mini-SIM card purchased from Straight Talk (the AT&T compatible one).
After receiving the $150 promo code and remembering the $100 old Motorola phones trade in program, it seemed like the right time to make the move and upgrade ($500 retail down to $250 after rebates/promotions). I placed my order on December 5th and was told it would arrive by the 10th (came on the 11th due to snow).
Once I got my Moto X, all I had to do was cut my Mini-SIM card down to a Nano-SIM card. Templates can be found here: airportal.de/nanosim/. Aside from the network cutting in and out (lasted for the first 10 minutes or so), I've had no problems since. I have access to 4G LTE and everything else seems to be working fine (haven't tried tethering yet).
In the end, I'd recommend the T-Mobile version just because there is no branding and it works fine on the AT&T network as well.
Click to expand...
Click to collapse
I got the TMO version for use on AT&T. No branding at all.
I went to the AT&T store and they put in a new sim. I'm getting perfect service though I only see the 4G at the top. Wondering if I should also be seeing 4GLTE? Is there something else I need to do to get LTE speeds? Or am I already getting them and just don't see it?
Look here in xda, you won't get lte unless ATT registers your Moto with an imei from another ATT Moto. I had the same issue. There's a post here in xda where you will see what I had to do and who helped me
Rocking the new Moto X
Woop Woop
likeybikey said:
-People have said that if you unlock the bootloader you void the warranty. Whose warranty--Motorola's? Would this include dropping the phone and breaking the glass? I was considering getting an extended warranty--would someone like SquareTrade care about an unlocked bootloader if physical damage occurred?
Click to expand...
Click to collapse
I remember reading somewhere a chat between a potential customer and a Motorola rep. The rep said that unlocking it voids the entire warranty with Motorola, hardware included. So you would have to check with whoever else you could get the warranty with.
Sent from my Moto-X (GSM DE) using the xda-developers app
nelsonccc said:
I got the TMO version for use on AT&T. No branding at all.
I went to the AT&T store and they put in a new sim. I'm getting perfect service though I only see the 4G at the top. Wondering if I should also be seeing 4GLTE? Is there something else I need to do to get LTE speeds? Or am I already getting them and just don't see it?
Click to expand...
Click to collapse
Sorry for the late response. I actually had to check my phone a few times just to confirm my thoughts before posting them here. I can't really comment on 4G and 4G LTE for AT&T, because I have Straight Talk. But from what I've read, I believe Straight Talk piggy-backs on AT&T's network as is, so I'd imagine it'd have to be similar.
I've been noticing the 4G icon in the notification bar also indicates 'LTE', although not all the time. There are times where I also see only the 4G icon without the 'LTE' symbol, during which speed tests have been much slower. Can't confirm what r_diaz13 posted, and I don't know if what he's saying applies to people on Straight Talk's network.
r_diaz13 said:
Look here in xda, you won't get lte unless ATT registers your Moto with an imei from another ATT Moto. I had the same issue. There's a post here in xda where you will see what I had to do and who helped me
Rocking the new Moto X
Woop Woop
Click to expand...
Click to collapse
This is WRONG.
Totally NOT necessary to use an IMEI from a different LTE phone.
I just activated an XT1053 (the TMo version, which is SIM unlocked).
Put in an AT&T nano-sim card which I picked up from my AT&T company owned store.
Called in to activate the card -- but asked to talk to 2nd level support since I knew 1st level would NOT be able to help and likely tell me the same kind of dumb stuff I've seen posted about how to get the phone to work.
2nd level support was great -- and because I knew what I was talking about, it took less than 5 min to take care of what is necessary.
You will need to manually enter MMSC and MMS Proxy in the APN settings
MMSC should be:
-https://mmsc.mobile.att.net-
don't enter with the dash at front and back, the forum doesn't let you post what they think are links if you are new.
MMS proxy should be:
proxy.mobile.att.net
Just as an FYI -- these settings are BURIED (you cannot see them) on the AT&T version --
And these settings are NOT DOWNLOADED AUTOMATICALLY via SIM card (I thought they might be).
You can confirm whether you are getting LTE service not only by the indicator in the status bar up at the top with signal strength but by going into ABOUT PHONE from the Settings menu (scroll all the way down). Then in that menu, click on STATUS. Here you will scroll down and see the battery level, network signal strength and mobile network type.
If you are getting 4G only, it would should HSPA+.
If you are getting LTE, it will show LTE here.
Hope that helps.
I'm just a bit weary of seeing the wrong information on this and hope this helps others out. The TMo version works great on AT&T, you just have to enter the MMSC and MMS proxy manually and you should be good to go.
Did you have an LTE plan before? I'm telling you it is true. The xda member that helped me out is an att employee who works at a att store and he was the only one able to do it. He told me since I didn't have an lte plan before it wouldn't just pick up lte. ATT has to end other feature in the account. When I gave then the tmo imei, it shows up as gsm only, not lte.
So if you already have lte, you are good to go with just a simple sim swap. If you don't have lte already, you need to follow these steps. Nothing to do with APN settings or anything.
Rocking the new Moto X
Woop Woop
r_diaz13 said:
Did you have an LTE plan before? I'm telling you it is true. The xda member that helped me out is an att employee who works at a att store and he was the only one able to do it. He told me since I didn't have an lte plan before it wouldn't just pick up lte. ATT has to end other feature in the account. When I gave then the tmo imei, it shows up as gsm only, not lte.
So if you already have lte, you are good to go with just a simple sim swap. If you don't have lte already, you need to follow these steps. Nothing to do with APN settings or anything.
Rocking the new Moto X
Woop Woop
Click to expand...
Click to collapse
This is wrong information -- hopefully people here read through to get the accurate information.
I did NOT have an LTE plan before (I had a Moto Atrix 4G, which gave me HSPA+ service).
When I gave them the IMEI from the TMo Moto X I purchased, I asked them specifically, what does it show in your system?
2nd level support told me it was a non-ATT version of the Moto X -- totally accurate.
She then knew exactly what settings were needed (as I noted above in my post) to be entered. These settings are not shown anywhere on the AT&T version of the Moto X (again, I know because I have 3 of those that I unlocked).
To be clear to anyone else thinking of getting the TMo version of the Moto X. You do not need to lie and give them some other IMEI. You simply need to make sure you have those settings input into your phone. As soon as they were entered, my TMo XT1053 showed LTE service.
Please do not continue to give out wrong information -- this may have solved the problem for you (to give a different IMEI), but it is totally not necessary. I have seen people asking about how they are supposed to get an LTE IMEI to activate a nano sim card and get LTE service. It is not necessary on the TMo version (now Moto says this is the GSM unlocked version -- which is really more accurate because it has absolutely NO BRANDING and no other software from any provider -- and is exactly the same as the Dev Edition except for the fact that the Dev edition can be bootloader unlocked and retain its warranty).
I have the Dev Version (same as T-Mobile) running on Straight Talk with AT&T. Other than one small configuration issue in the phone settings LTE is working fine.
So I'm looking to upgrade but don't want to be stuck in another 2 yr contract. I'm thinking of using Verizon's edge program and getting the moto x and then paying the rest off when my contract is up at the end of the year. I would like to know if its possible to then go with an AT&T sim card and prepaid option in the same phone?
I have read all Verizon 4G phones come sim unlocked. I can't find either if the Verizon version comes with the GSM radios necessary to do this.
Any help on the subject would be great! Really tired of Verizon..
Sent from my Galaxy Nexus using Tapatalk 2
Won't work. Vzw uses Cdma for voice and lte for data. Unless someone proves me wrong, the phone can't do voice calls on att network
gunnyman said:
Won't work. Vzw uses Cdma for voice and lte for data. Unless someone proves me wrong, the phone can't do voice calls on att network
Click to expand...
Click to collapse
That is my understanding as well. Won't work. Networks incompatible.
---------- Post added at 10:11 AM ---------- Previous post was at 10:09 AM ----------
greenro89 said:
So I'm looking to upgrade but don't want to be stuck in another 2 yr contract. I'm thinking of using Verizon's edge program and getting the moto x and then paying the rest off when my contract is up at the end of the year. I would like to know if its possible to then go with an AT&T sim card and prepaid option in the same phone?
I have read all Verizon 4G phones come sim unlocked. I can't find either if the Verizon version comes with the GSM radios necessary to do this.
Any help on the subject would be great! Really tired of Verizon..
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
The carrier issue aside (see above) you should not even consider upgrading with Edge unless you want to pay for you phone twice. It is a complete rip off.
All newer Verizon phones are gsm unlocked and will be able to do voice and most of them hspa+ data on ATT. Weather the lte will work really depends on the phone and what radios they put in it.
Sent from my XT1060 using XDA Premium 4 mobile app
---------- Post added at 10:04 AM ---------- Previous post was at 09:57 AM ----------
Just checked for the moto x and no LTE but everything else should work just fine
Sent from my XT1060 using XDA Premium 4 mobile app
gunnyman said:
Won't work. Vzw uses Cdma for voice and lte for data. Unless someone proves me wrong, the phone can't do voice calls on att network
Click to expand...
Click to collapse
It is possible to use a GSM carrier's sim in Verizon's phones for both voice and data. What would you like as Proof?
I don't have an X yet, but....
I have both Verizon and T-Mobile lines for work. (Verizon for personal).
My T-Mobile phone is a Galaxy S3. When T-Mo started supporting the iPhone, our corp rep swapped my sim to a T-Mo Nano SIM for me.
Since then, I have put my T-Mobile sim into my Verizon iPhone 5, VZW Galaxy S4, VZW BB Z10, VZW BB Q10, and VZW Nokia 928. Doing so works fine for voice, data and text messaging on T-Mobiles network, but at EDGE speeds since these VZW phones don't support the 1700mhz UMTS/HSPA/HSPA+ bands that T-Mo uses. They do support the 1900mhz band that ATT uses, but I don't have an ATT sim handy to pop them in.
Oh, and I did need to use a SIM adapter to convert between nano and micro since only the iPhone 5 uses Nano sim. I do not recall results of trying to SMS, I really don't sms anyway.
gunnyman said:
Won't work. Vzw uses Cdma for voice and lte for data. Unless someone proves me wrong, the phone can't do voice calls on att network
Click to expand...
Click to collapse
I hate seeing this response all the time on Verizon devices. Most modern Verizon LTE phones do GSM just fine. Verizon used to call this being a "World Phone", but really all Verizon phones are world devices now. Galaxy S3/4, Note 2/3, all of Moto's phones, etc.
From the Verizon Moto X specs page:
Network
Network: LTE, CDMA/1xEVDO Rev. A (800/1900 MHz)
Global Network: EDGE/GSM (850/900/1800/1900), HSPA/UMTS( 850/900/1900/2100), HSDPA 42.2 Mbps (Category 20), HSUPA 5.76 Mbps
Click to expand...
Click to collapse
I stand corrected and won't spread misinformation any more. Thanks for educating me.
Thanks everyone for all the replies! I have heard so many things and this clears the air for me.
Sent from my Galaxy Nexus using Tapatalk 2
The Droid Ultra connects to At&t without any modification required:
http://www.droid-life.com/2013/08/22/droid-ultra-can-connect-to-atts-hspa-network-out-of-the-box/
In the past some phones on Verizon with GSM capabilities were software restricted from connecting to US GSM providers.
Since the X works on ATT it should work with a Straight Talk ATT Sim card right?
Sent from my Nexus 7 using Tapatalk 4
Yes
i think in the past verizon phones were GSM locked for only europe / asia and not US GSM carriers.
i think the moto x, and the droid ultra/maxx/mini are not GSM locked for US.
i just switched from verizon to t-mobile. and my last phone was a droid razr m. i unlocked the radio to be able to use t-mobile for a week before my moto-x came, and it DOES work on at&t / t-mobile.
in this case it supported at&t / t-mobile on edge and voice. with 1900mhz hspa+ at&t 3g (and refarmed t-mobile band). no LTE support.
i think the xt1060 is the verizon moto -x and it doesnt havef support for t-mobile HSPA + 1700/2100 AWS or the t-mobile or at&t LTE bands.
so if you bought a verizon moto x, and used it on at&t in the future you'd only get hspa+ 1900mhz at&T "4G". and edge/voice. but it should work fine.
I can confirm that putting my wife's iPhone 5 nano-sim into my Verizon Moto X does work, and I get H+ (7-8mbit) speeds.
Okay so the next question would be, does this also apply to Sprint's Moto X? I hope it does but I am not holding my breath.
Sent from my Nexus 7 using XDA Premium HD app
can somebody please answer the sprint motox question?
ktt4510 said:
Okay so the next question would be, does this also apply to Sprint's Moto X? I hope it does but I am not holding my breath.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
i don tthink sprint has GSM unlocked by default. you'd have to find a way to unlock it, which from the sounds of it on this forum from other posters is not easy. probably have to be a sprint customer and say you are going on a trip to europe etc...
Maxx works...ish
I got a T-Mobile SIM for my VZW Droid Maxx (same chipset as the Moto X). With no changes to any settings it gets voice and text, and after manually inputting the T-Mobile APN I picked up H+ and the 1900 MHz 4G in my area. There's an article on Android Central with pictures of a Droid Ultra on a GSM network (I think AT&T).
That said, Verizon's tech support maintain that their unlocked phones aren't allowed to use any non-Verizon US carrier. They also said that if I take a U.S. T-Mobile SIM card roaming outside the US it will work there. The last generation of carrier locks were based on the nationality of the SIM card, not the tower, so that doesn't make much sense. Further reason to question anything tech support tells you.
I have a Verizon moto x and I placed my Att nano Sim in and I can only seem to get hspa+ not LTE. Other than that everything else seems to work fine.
tshay508 said:
I have a Verizon moto x and I placed my Att nano Sim in and I can only seem to get hspa+ not LTE. Other than that everything else seems to work fine.
Click to expand...
Click to collapse
I think you would get LTE if you unlock the bootloader and flash the att modem files. I think some people with the Dev edition ultra maxx flashed the att X radio and it enabled LTE.
Sent from my Nexus 7
greenro89 said:
So I'm looking to upgrade but don't want to be stuck in another 2 yr contract. I'm thinking of using Verizon's edge program and getting the moto x and then paying the rest off when my contract is up at the end of the year. I would like to know if its possible to then go with an AT&T sim card and prepaid option in the same phone?
I have read all Verizon 4G phones come sim unlocked. I can't find either if the Verizon version comes with the GSM radios necessary to do this.
Any help on the subject would be great! Really tired of Verizon..
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
fyrmd said:
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Click to expand...
Click to collapse
I put a T-mobile SIM in my stock 16GB Verizon Moto x. Here is what works and doesn't.
First off, 4G works! in the South Jersey area and it is Blistering fast, I have exceeded 40MB speed test downloads twice, Several in the high 30s and I am avg in mid 20s. Uploads are averaging 20+/- . Compared to Verizon this is like comparing Fios to 1999 era dial up. the best I ever got on Verizon 4G was 14 download but average between 4 and 9 !
The Network notification switches a lot between 4G, "H" mode, whatever that is, just bars and another which I didn't catch quick enough to read ?
Battery has been amazing compared to my galaxy Nexus, I got 7.5 hours of Actual "Screen on Time" which included some GPS use and an hour of music streaming total phone up time was 34+ hours. How long it will perform like this is anyone's guess, today i got about 6.5 of Screen on time. I hope this inst a trend
Now for the bad news - Using it as a Phone. Incoming calls are fine but, making outgoing is a Pain in the A$$.
When I dial a number, (which is a hassle on this KitKat dialer) it often goes to the home screen or back to the dialer. The Call Fails. I am not sure if my dialer is buggy or its a compatibility problem. the KitKat Dialer on the Moto X is an exorcise in futility. Google are you listening? Why reinvent the wheel. All I want in my Dialer is a Number Pad! and a phone book.
When I Open dialer I see Recent calls up top, the whole middle section says all contacts and is otherwise blank, the bottom has the number pad icon, History and settings dots.
Clicking the number pad icon enlarges the bottom section, which then goes all white and removes the three icons. I have to then click the back arrow and re-click the number pad icon to bring it up the actual dialer. .
At this time I can dial. and then the call always fails on the first attempt. Sometimes it takes several attempts to go through.
When I click send on the dialer the 4G disappears and I am left with just the bars. they come back when call is done but sometimes take a few minutes to do so.
If you Kill the dialer app or swipe it away, coming back to it you will have the same issues when trying to get the number pad (two attempts) if you dont, the number pad will open on first attempt. but the calls will still fail on the first try.
I also cant use the internet when in a call, whether WiFi is on or off. Is this a T-mobile problem? I could use the net in Verizon when in a call when on 4G or WiFi
The Data is set to global mode but I have tried both the other settings. On boot up I get a warning saying the SIM is not recognized which I just swipe away.
I am also having this problem. After making a call, the music player and the phones "volume" aspects cease to work., Meaning, I get no sound out of the phone, Music, notifications alarms etc.. This happens almost every time and the only fix is a reboot
I disabled all Verizon Bloat and a lot of Moto Bloat as well This could be causing some of the bugs? But i have tested several different configurations all with the same outcomes.
Hope this helps and puts an end to the - Will it work or not questions. There seem to be a lot of Net Know it all's that flat out say a Verizon Moto x wont work with a T-Mobile SIM or some other undocumented "fact"
Hi guys i plan on buying a ATT Moto X XT-1058 and unlocking it and am wondering what kind of service i will get on tmobile. I saw that att has all the same 4g bands as the tmobile moto x but the tmobile has the 1700 3G band that the att model doesnt. Will i get LTE speeds on tmobile with the ATT Moto x
ultrairon said:
Hi guys i plan on buying a ATT Moto X XT-1058 and unlocking it and am wondering what kind of service i will get on tmobile. I saw that att has all the same 4g bands as the tmobile moto x but the tmobile has the 1700 3G band that the att model doesnt. Will i get LTE speeds on tmobile with the ATT Moto x
Click to expand...
Click to collapse
You should get LTE, but you won't get HSPA/HSPA+ unless you are in a "re-farmed area" using UTMS on 1900mhz.
Sounds like you have already done the research....so not really sure what you are asking...
You can see if you are in a re-farmed area by searching google for "t-mobile network optimization" - if you area is "optimized" you are in a refarmed area.
The big drawback is that *IF no T-mobile LTE is available, AND you aren't in a re-farmed area* you will only get 2G (EDGE) speeds. YUCK!
samwathegreat said:
You should get LTE, but you won't get HSPA/HSPA+ unless you are in a "re-farmed area" using UTMS on 1900mhz.
Sounds like you have already done the research....so not really sure what you are asking...
You can see if you are in a re-farmed area by searching google for "t-mobile network optimization" - if you area is "optimized" you are in a refarmed area.
The big drawback is that *IF no T-mobile LTE is available, AND you aren't in a re-farmed area* you will only get 2G (EDGE) speeds. YUCK!
Click to expand...
Click to collapse
alright so i should get LTE and i did some research but just wanted to make sure so i dont get screwed over. I live in Leesburg va which is about 30 minutes from DC and DC is one of the refarmed areas so should i get the HSPA+ to?
ultrairon said:
alright so i should get LTE and i did some research but just wanted to make sure so i dont get screwed over. I live in Leesburg va which is about 30 minutes from DC and DC is one of the refarmed areas so should i get the HSPA+ to?
Click to expand...
Click to collapse
if T Mobile's website says that your area has completed network optimization then yes. You should be good for both LTE and HSPA+. Remember that HSPA is only a fallback for when LTE is unavailable... :good:
Hit thanks if I've answered your questions
samwathegreat said:
if T Mobile's website says that your area has completed network optimization then yes. You should be good for both LTE and HSPA+. Remember that HSPA is only a fallback for when LTE is unavailable... :good:
Hit thanks if I've answered your questions
Click to expand...
Click to collapse
Thanks for your help. So ill be good for LTE most of the time but when LTE is unavaiable then HSPA will be the fallback if im in a refarmed area if im not then ill get 2G. That sounds good for me i dont really leave the DC area much. I hit thanks
ultrairon said:
Thanks for your help. So ill be good for LTE most of the time but when LTE is unavaiable then HSPA will be the fallback if im in a refarmed area if im not then ill get 2G. That sounds good for me i dont really leave the DC area much. I hit thanks
Click to expand...
Click to collapse
One thing to keep in mind is that if you buy the AT&T branded XT1058 it is the ONLY variant that cannot have the bootloader unlocked, which means you can't flash the T-Mobile ROM to get things like visual voicemail working as they should..
I actually ended up soft bricking one of my XT1058 because I tried to flash T-Mob version, am now waiting on official 4.4.4 FW to be released so I can get that fixed.
In retrospect, I'd have bought an XT1053 instead or a Rogers-branded XT1058 - i didn't do my research and hence got suckered into the lower prices of the ATT ones on eBay.. just my 2 cents..
blackout420 said:
One thing to keep in mind is that if you buy the AT&T branded XT1058 it is the ONLY variant that cannot have the bootloader unlocked, which means you can't flash the T-Mobile ROM to get things like visual voicemail working as they should..
I actually ended up soft bricking one of my XT1058 because I tried to flash T-Mob version, am now waiting on official 4.4.4 FW to be released so I can get that fixed.
In retrospect, I'd have bought an XT1053 instead or a Rogers-branded XT1058 - i didn't do my research and hence got suckered into the lower prices of the ATT ones on eBay.. just my 2 cents..
Click to expand...
Click to collapse
Alright thanks but I can still root it and flash paranoid android right?
ultrairon said:
Alright thanks but I can still root it and flash paranoid android right?
Click to expand...
Click to collapse
Um....no.
In your original post, you said you intended to "unlock" it - I **THOUGHT** you meant "SIM-UNLOCK" it.
Not only is the AT&T Moto X **BOOTLOADER-LOCKED**, but it is also **SIM-LOCKED** at AT&T.
The ONLY way to use it on T-Mobile is to SIM-UNLOCK it - you do this by obtaining an unlock code from an online unlock code seller.
Now there is only ONE way to unlock the bootloader to be able to flash other ROMS. You have to pay $45 to the "China Middleman" to get a bootloader unlock code. He somehow has access do Motorola's database. He doesn't have all of the codes, so it might not be possible to BOOTLOADER-UNLOCK at all. There is no other way. Zero.
Considering that you are going to have to pay between $10 and $30 to get a SIM-UNLOCK code, **AND** another $45 to get a BOOTLOADER-UNLOCK code (assuming you want to be able to root and flash custom ROMS).....you might want to give up on this idea of using an AT&T Moto X, and instead, buy the actual T-MOBILE Moto X.
I really thought you already understood all of this. Your OP stating that you intended to unlock it to use it on T-Mobile gave me the impression that you KNEW it was sim-locked to AT&T.
Hope this answers all of your questions.
samwathegreat said:
Um....no.
In your original post, you said you intended to "unlock" it - I **THOUGHT** you meant "SIM-UNLOCK" it.
Not only is the AT&T Moto X **BOOTLOADER-LOCKED**, but it is also **SIM-LOCKED** at AT&T.
The ONLY way to use it on T-Mobile is to SIM-UNLOCK it - you do this by obtaining an unlock code from an online unlock code seller.
Now there is only ONE way to unlock the bootloader to be able to flash other ROMS. You have to pay $45 to the "China Middleman" to get a bootloader unlock code. He somehow has access do Motorola's database. He doesn't have all of the codes, so it might not be possible to BOOTLOADER-UNLOCK at all. There is no other way. Zero.
Considering that you are going to have to pay between $10 and $30 to get a SIM-UNLOCK code, **AND** another $45 to get a BOOTLOADER-UNLOCK code (assuming you want to be able to root and flash custom ROMS).....you might want to give up on this idea of using an AT&T Moto X, and instead, buy the actual T-MOBILE Moto X.
I really thought you already understood all of this. Your OP stating that you intended to unlock it to use it on T-Mobile gave me the impression that you KNEW it was sim-locked to AT&T.
Hope this answers all of your questions.
Click to expand...
Click to collapse
that is what i meant in the OP but then you said that the bootloader cant be unlocked so i was also wondering if it can be rooted. Guess not ill look into T-mobile Moto X's
I just picked up a used verizon G2 to use on the Straight Talk service. First issue. I pulled the sim card from my old straight talk phone and put it in the G2. It instantly said unknown sim but, when i restarted the phone i had service. Problem is, i still have the unknown sim icon and cant seem to use LTE. Second issue. im stuck on 4.4.2 because it will not allow me to download any system updates. Im hoping there is a way to manually update. Any help would be greatly appreciated!
ccross13126 said:
I just picked up a used verizon G2 to use on the Straight Talk service. First issue. I pulled the sim card from my old straight talk phone and put it in the G2. It instantly said unknown sim but, when i restarted the phone i had service. Problem is, i still have the unknown sim icon and cant seem to use LTE. Second issue. im stuck on 4.4.2 because it will not allow me to download any system updates. Im hoping there is a way to manually update. Any help would be greatly appreciated!
Click to expand...
Click to collapse
If you want to update hook up the phone to a windows pc and install the verizon software updater that is built into the flash memory when you plug it in. It will download and apply the Lolipop update. You should figure out what straight talk sim you have because it could be a verizon one, but most likely it's an at&t one so you'll need to edit your apn settings.
What provider is your Straight Talk SIM running off of? T-Mobile? AT&T?
The Verizon G2 only has LTE bands 4 and 13. B13 is Verizon-only, while B4 is used by multiple carriers.
If T-Moible, B4 is the primary band, but if you are in a rural area that TMO refarmed, LTE will be on B2 instead.
If AT&T, their primary LTE band is B5, but there are some select areas that have it on B4 also.
The "Unknown SIM" icon is because the Verizon ROM detects a non-Verizon SIM card. I'm sure there are ways to get rid of it via rooting, or just flash a custom ROM. If your Straight Talk is going through T-Mobile, there's a T-Mobile ROM in the dev forum that adds some TMO functionality like Wifi Calling.
I was able to upgrade to Lollipop using the verizon software and my pc so thanks for that!
The sim I am using is an AT&T straight talk sim. Do they have a sim just for verizon LTE networks?
Sent from my VS980 4G using XDA Free mobile app
ccross13126 said:
I was able to upgrade to Lollipop using the verizon software and my pc so thanks for that!
The sim I am using is an AT&T straight talk sim. Do they have a sim just for verizon LTE networks?
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
For new lines, you can stick your phone's IMEI into ST's BYOP checker and if it checks out, you can order a Verizon LTE SIM. For existing lines, probably easier to just call up CS and ask.
I just ordered a verizon LTE sim card from straight talk. They transfered my number to a new sim once before, I'm sure they can do it again. If not, I can live with a new number to have a working phone again.
Sent from my VS980 4G using XDA Free mobile app
ccross13126 said:
I just ordered a verizon LTE sim card from straight talk. They transfered my number to a new sim once before, I'm sure they can do it again. If not, I can live with a new number to have a working phone again.
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
ccross13126, how did this all turn out? Are you able to use the verizon vs980 LG G2 on Straight Talk with 4g data speeds (using vzw towers)?
I am reading all kinds of conflicting stories. Some say it'll work, but 3g speeds only. BUT, it appears that MAYBE the VS980 can now use verizon 4g towers . . maybe in the last few months. Can you confirm? THANKS in advance. I have a rooted Verizon LG G2 (VS980) that I LOVE .. but i would really love to save a few $$$ and use Straight Talk. Thanks again.
dragonflyr said:
ccross13126, how did this all turn out? Are you able to use the verizon vs980 LG G2 on Straight Talk with 4g data speeds (using vzw towers)?
I am reading all kinds of conflicting stories. Some say it'll work, but 3g speeds only. BUT, it appears that MAYBE the VS980 can now use verizon 4g towers . . maybe in the last few months. Can you confirm? THANKS in advance. I have a rooted Verizon LG G2 (VS980) that I LOVE .. but i would really love to save a few $$$ and use Straight Talk. Thanks again.
Click to expand...
Click to collapse
I am using the Straight Talk CDMA service on a few of my phones at the moment. I usually use a Nexus 6 but I had to send it in for a problem and have a Verizon LG G2 and a Verizon HTC M8. The sim card works on both of these phones at LTE speeds. At least in my area, Verizon still seems the most reliable for me. It might not be the fastest service but I don't have issues with missed texts and dropped calls like I do with some other services I have tried.
Hope this helps.
I have a T-Mobile retail 1st gen ( xt1053 ) that has been on AT+T since new with no issues. Now, since updating to the OTA 5.1 I've lost LTE. I get 4G, but I've confirmed I'm getting HPSA+ speeds only, and the notification lists "4G" whereas before the update to Loillipop it specified LTE. I've kept it stock since the update and everything else works, just no LTE.
Again, before the update I *did* get LTE. I've read about AT&T needing to "provision" an account for LTE, and that maybe this wouldn't be automatic if you were using a non-AT&T phone, but since i had LTE before with this phone, and the only change was the update, I don't know if that could be the issue.
Anybody else run into this ?
ThePFJ said:
I have a T-Mobile retail 1st gen ( xt1053 ) that has been on AT+T since new with no issues. Now, since updating to the OTA 5.1 I've lost LTE. I get 4G, but I've confirmed I'm getting HPSA+ speeds only, and the notification lists "4G" whereas before the update to Loillipop it specified LTE. I've kept it stock since the update and everything else works, just no LTE.
Again, before the update I *did* get LTE. I've read about AT&T needing to "provision" an account for LTE, and that maybe this wouldn't be automatic if you were using a non-AT&T phone, but since i had LTE before with this phone, and the only change was the update, I don't know if that could be the issue.
Anybody else run into this ?
Click to expand...
Click to collapse
Unfortunately don't know the reason for that, would think something in the settings, or some update to the modem/radio?
But do have a question -my friend has the same phone Retail XT1053 using AT&T, but doesn't get LTE, at least wasn't before 5.0, will assume still not.
Wondering if you had to change any settings to get LTE -AT&T said it's not possible on that phone, but did see some posts in the past about changing some settings to get LTE (i.e, settings under data to automatic, etc) but his doesn't have the options mentioned.
Hope you get it figured out, will be interested, too
Family has 4 XT1053's on AT&T for the past 15 months and we all get LTE. Didn't have to do anything special. They put nano SIMs in our phones at one of their company retail stores, and it just works. Was roaming in Canada last week on Rodgers, and got LTE there as well. Don't remember having to do anything with the APN setting either. The XT1053 is missing one of the AT&T LTE bands which is on their model, but didn't think they were using that band in the US yet. Maybe that has changed and that band is used in your area. None of us have upgraded to 5.1 yet so can't comment on changes from the new OS.
M973 said:
But do have a question -my friend has the same phone Retail XT1053 using AT&T, but doesn't get LTE, at least wasn't before 5.0, will assume still not.
Wondering if you had to change any settings to get LTE -AT&T said it's not possible on that phone, but did see some posts in the past about changing some settings to get LTE (i.e, settings under data to automatic, etc) but his doesn't have the options mentioned.
Hope you get it figured out, will be interested, too
Click to expand...
Click to collapse
When I switched from my Galaxy S2 on AT+T to the xt1053 I didn't have to change anything. I did have the same issue for a few days, but then one day LTE was there. Since the S2 was a non-LTE phone I just figured there was something that needed to happen on the backend for AT&T to enable it. If you search online there are numerous people having the same issue for multiple phones - usually non-AT&T specific unlocked models. Some people claim AT&T support was able to do something for them, others say that putting their SIM in an AT&T branded phone let it "register" and after that they got LTE. I didn't have to do either, it just came on after a couple days. I was about to go to the nearest AT&T store, but then LTE started working.
So...I don't know what the real fix was back then. Since I get good enough speed to stream, which is all I need, it's not critical, just annoying. It's been 2 weeks since I updated, so I'll probably head to the store this weekend to see if they can help.
larry62 said:
Family has 4 XT1053's on AT&T for the past 15 months and we all get LTE. Didn't have to do anything special. They put nano SIMs in our phones at one of their company retail stores, and it just works. Was roaming in Canada last week on Rodgers, and got LTE there as well. Don't remember having to do anything with the APN setting either. The XT1053 is missing one of the AT&T LTE bands which is on their model, but didn't think they were using that band in the US yet. Maybe that has changed and that band is used in your area. None of us have upgraded to 5.1 yet so can't comment on changes from the new OS.
Click to expand...
Click to collapse
Thanks. I went with the friend that has the XT1053 to a company AT&T store, showed them my phone, too, which is an AT&T branded XT1058 with LTE -he did seem a bit confused, but claimed mine could because it was AT&T branded, that his didn't support the bands for LTE but obviously people are able to get LTE on the XT1053 with AT&T
And once again LTE appeared without me doing anything. This time it just took longer than when I originally got the phone. Today ( 3 weeks exactly after flashing the OTA Lollipop update ) it decided to connect via LTE and not "just" 4G. As I said in the original post, back when I first got the phone ( Xmas 2013 ) it look 2 or maybe 3 days before it connected to LTE.
I just wish I knew what the trigger was.
Anyway, working now.